Acrylic Provisional Restorations Research Articles

Prosthetic rehabilitation with implant-supported fixed prosthesis in a completely edentulous patient: A clinical report

To present clinical strategies for prosthetic rehabilitation of completely edentulous patients using immediate-loading basal implants.A 58-year-old female patient was referred to the Department of Prosthodontics for restoration of her completely edentulous maxilla and mandible with a fixed full-arch implant-prosthetic rehabilitation. Since the patient lacks adequate bone in the posterior maxilla and is not willing to undergo a removable interim prosthesis, an immediate loading protocol along with 8 single-piece basal implants, including 2 pterygoid implants in the maxillary arch and 6 single-piece basal implants in the mandibular arch, was selected as the treatment option, followed by an acrylic provisional restoration. Four months later, a definitive fixed implant-supported prosthesis was delivered.This treatment strategy may be considered for rehabilitating patients with atrophic ridges demanding fixed provisional prostheses throughout the healing period and can be employed even in immediate implant placement after extraction.

Allograft and Collagen Membrane Augmentation Procedures Preserve the Bone Level around Implants after Immediate Placement and Restoration.

Background: Immediate implant placement and restoration (IPR), is a reliable treatment modality. Purpose: This historical prospective study evaluated the medium-term outcomes of hard tissue after IPR in the anterior maxilla with simultaneous hard tissue augmentation. Methods: Seventy-three patients treated with single-implant IPR in the anterior maxilla were followed for 1-8 years. Treatment involved, atraumatic extraction, immediate implant placement and abutment adaptation, followed by simultaneous augmentation with mineralized freeze-dried bone allograft (FDBA) particles to fill the gaps and restore the ridge. The surgical site was stabilized with a resorbable collagen membrane, followed by the connection of an acrylic provisional restoration. Results: All implants osseointegrated during the follow-up period (mean, 34 ± 22 months). Radiographic evaluation of the distance between the implant shoulder (IS) and crestal bone level (CBL) was of 0.86 ± 0.86 mm and 0.8 ± 0.84 mm mesially and distally, respectively. Splitting the results into up to 3 years and 3–8 years of follow-up data, the corresponding values were 0.90 ± 0.83 and 0.68 ± 0.88 for the mesial aspect and 0.99 ± 0.87and 0.74 ± 0.83 for the distal aspect, respectively. Mean peri-implant probing depth was 3.63 mm (SD ± 1.06) and 16 implants (22%) presented at least one bleeding pocket of ≥5 mm (peri implant mucositis). Conclusions: The immediate replacement of a single maxillary tooth by implants combined with guided bone regeneration is a predictable treatment modality with favorable peri-implant bony response.

Antibacterial Effect of a Temporary Cement-Dissolving Liquid.

Methods for removing temporary cement with an antibacterial effect might improve prosthetic treatment prognosis. Three removal methods were assessed: (1) immersion of an acrylic provisional restoration in a temporary cement dissolver (Temp-off); (2) mechanical removal with a dental explorer; and (3) sandblasting. Two temporary cements, one with eugenol (Temp-Bond) and one without eugenol (Temp-Bond NE) and of two thicknesses (100 μm and 250 μm), were examined. Immersion in Temp-off produced the most effective bacterial count decrease compared to the other methods (P < .05). No significant difference was found between the two cement types, although the decrease in count was more evident in the thicker (250 μm) cement layer. Temp-off dissolving liquid used for removal of temporary cement exhibited an antibacterial effect and nonmechanical cleaning ability.

Comparative Evaluation of Marginal Discrepancy in Tooth Colored Self Cure Acrylic Provisional Restorations With and Without Reinforcement of Glass Beads: An In-Vitro Study.

This invitro study was conducted to compare and evaluate marginal discrepancy in two types of tooth colored self cure provisional restorative materials {DPI&UNIFAST TRAD} before and after reinforcement of glass beads. The aim of the present study was to evaluate and compare marginal discrepancy in two types of provisional restorative materials (DPI and UNI FAST TRAD) before and after reinforcement with Glass beads. Tooth shaped resin copings were fabricated on custom made brass metal die. A total of 60 resin copings were fabricated in which 30 samples were prepared with DPI and 30 samples with UNIFAST material. Each group of 30 samples were divided in to two sub groups in which 15 samples were prepared with glass bead reinforcement and 15 samples without reinforcement. The marginal discrepancy was evaluated with photomicroscope {Reichet Polyvar 2 met} by placing the resin copings on custom made brass resin coping holder. Measurements obtained were statistically analysed by unpaired t-test to know any significance between two variables. Unreinforced DPI specimens had shown lower marginal discrepancy (442.82) than reinforced specimens (585.77). Unreinforced UNIFAST specimens have shown high values of marginal discrepancy (592.83) than reinforced specimens (436.35). p-value between reinforced and unreinforced specimens of DPI (p=0.0013) and UNIFAST (p= 0.0038) has shown statistical significance. This in-vitro study revealed that unreinforced DPI specimens have shown lower marginal discrepancy than reinforced specimens and unreinforced UNIFAST specimens have shown higher values of marginal discrepancy than reinforced specimens.

Single-tooth morse taper connection implant placed in grafted site of the anterior maxilla: clinical and radiographic evaluation.

The aim of this study was to achieve aesthetically pleasing soft tissue contours in a severely compromised tooth in the anterior region of the maxilla. For a right-maxillary central incisor with localized advanced chronic periodontitis a tooth extraction followed by reconstructive procedures and delayed implant placement was proposed and accepted by the patient. Guided bone regeneration (GBR) technique was employed, with a biphasic calcium-phosphate (BCP) block graft placed in the extraction socket in conjunction with granules of the same material and a resorbable barrier membrane. After 6 months of healing, an implant was installed. The acrylic provisional restoration remained in situ for 3 months and then was substituted with the definitive crown. This ridge reconstruction technique enabled preserving both hard and soft tissues and counteracting vertical and horizontal bone resorption after tooth extraction and allowed for an ideal three-dimensional implant placement. Localized severe alveolar bone resorption of the anterior maxilla associated with chronic periodontal disease can be successfully treated by means of ridge reconstruction with GBR and delayed implant insertion; the placement of an early-loaded, Morse taper connection implant in the grafted site was effective to create an excellent clinical aesthetic result and to maintain it along time.

Temporización inmediata de implantes unitarios en la maxila posterior

PurposeThis article is a prospective study of implant success rates and of mechanical and biological complications in the assisted-implant rehabilitation treatment of the posterior maxilla by immediate temporization. Material and MethodsThe clinical study observed 21 partially edentulous subjects with lip scar and antagonistic natural teeth in the posterior maxilla for a period of 6 months in which conical threaded internal implant connections were inserted with a surface treatment and timed immediately after being inserted into the jawbone by producing an acrylic resin crown on a temporary titanium abutment screwed directly into the implant and left without tooth contacts during the Maximal Intercuspal (MIC) and mandibular eccentric movements. All restorations were observed over a period of 6 months evaluating implant success rate and biological and mechanical complications. Results25 implants were inserted into 21 patients yielding an average surgical insertion torque of 45.6 Nt. During the clinical observation there was 100% success of implant survival. No biological complications were detected, but there were mechanical complications - a buccal cusp fracture of an acrylic provisional restoration and two screws loosening. ConclusionsThe unit temporization by temporary screwing is a predictable and reliable protocol that allows osseointegration and the coexistence in the health of peri-implant tissue and its prosthetic system.

Sinus Grafting With a Natural Flourohydroxyapatite for Immediate Load: A Study With Histologic Analysis and Histomorphometry

The goal of this retrospective study was to evaluate the survival rates of dental implants placed in sinuses grafted with a 50:50 composite ratio of autogenous bone and a natural flourohydroxyapatite (FHA) combined with platelet-rich plasma (PRP) using an immediate-load protocol. The authors hypothesized that a 50:50 composite ratio of FHA and autogenous bone combined with PRP would permit immediate loading without compromising implant survival rates. Eleven patients with bilateral partial edentulism of the posterior maxilla were enrolled in this retrospective study. Autogenous bone used in the graft procedure was harvested from the tibia of the left lower extremity. Each patient was grafted with a 50:50 composite ratio of autogenous bone and FHA. Membranes were not used to cover the lateral wall osteotomy site. Platelet-rich plasma was added to the graft material to accelerate and enhance bone regeneration. Four to 6 months after the grafting procedure, 37 hydroxyapatite-coated dental implants were surgically placed and immediately loaded between 72 hours and 5 days later with custom titanium abutments and acrylic provisional restorations placed out of functional occlusion. Six months later, definitive ceramometal restorations were cemented on to the custom abutments. Patients were observed over a 52-week period. The overall implant survival rate was 97.3%. Histologic and histomorphometric analysis of core samples revealed formation of new vital bone in different graft specimens ranging from 23% to 34%. In each core bone sample, 100% of the bone sample was determined to be vital. In the grafted maxillary sinus, the natural FHA combined with autogenous bone in a 50:50 composite ratio with PRP is a suitable graft material permitting immediate load without compromising implant survival rates while decreasing the overall healing time.

Immediate Loading of the Grafted Maxillary Sinus Using Platelet Rich Plasma and Autogenous Bone: A Preliminary Study With Histologic and Histomorphometric Analysis

The goal of this clinical study was to evaluate dental implant survival rates using the concept of a nonfunctional, immediate loading protocol with nonsplinted dental implants in the grafted maxillary sinus during a 52-week period. Random histomorphological and histomorphometric analysis was completed to evaluate the early healing effect of platelet rich plasma (PRP) and 50% autogenous bone combined with 3 different substitute graft materials. Four to 8 months after grafting the sinus with PRP sprayed autogenous bone combined with 3 different substitute graft materials in a 50:50 composite ratio, 27 hydroxyapatite- coated dental implants were surgically placed in 41 patients and immediately loaded between 48 hours and 5 days later with custom titanium abutments and acrylic provisional restorations placed out of functional occlusion. Six months later, definitive ceramometal restorations were cemented on to the custom abutments. During a 52-week observation period, no implants were lost. Between 4 and 8 months of graft healing time, histologic and histomorphometric analysis revealed formation of new vital bone in different graft specimens ranging from 77% to 100%. The preliminary results of this clinical study indicate that immediate nonfunctional loading using PRP and 50% autogenous bone combined with different substitute graft materials is a predictable protocol in the grafted maxillary sinus as early as 4 months of postgrafting. The high implant survival rate is due to the early formation of large percentages of new vital bone as confirmed by using histologic and histomorphometric analysis.

Immediate Load Protocol for Anterior Maxilla With Cortical Bone From Mandibular Ramus

To evaluate the concept of a nonfunctional immediate load protocol with single implants placed in the anterior maxilla that has been bone grafted with autogenous, block cortical grafts harvested from the ramus of the mandible. There were 19 hydroxyapatite-coated dental implants surgically placed in 19 patients, and immediately loaded between 48 hours and 3 days later with a custom acrylic provisional restoration that was placed out of functional occlusion. After 12 weeks, the definitive ceramo metal restoration was cemented to the custom abutment. Over a 1-year observation period, all implants continue to function. The preliminary results of this clinical study indicate that immediate, nonfunctional load with single implants is a predictable protocol in the bone grafted anterior maxilla in select cases.

Direct Technique for the Fabrication of Acrylic Provisional Restorations

Provisional restorations are fabricated to protect the prepared tooth structure during the period between tooth preparation and insertion of the definitive restoration. These restorations are also referred to in the literature as interim, temporary, or provisional restorations (prostheses). Such restorations should be uncomplicated and inexpensive to fabricate in a short period of time. Several laboratory and clinical techniques for the fabrication of provisional restorations have been described in the literature, such as the indirect technique, direct technique, and indirect-direct techniques for both single and multiple unit restorations. This article describes a step by step clinical technique for the fabrication of a direct provisional restoration to satisfy the issues of esthetics, patient comfort, speech and function, maintenance of periodontal health, and maxillomandibular relationships while wearing the restoration.

Immediate Functional Loading of Edentulous Maxilla: A 5‐Year Retrospective Study of 388 Titanium Implants

Immediate functional loading is a new surgical-prosthetic technique that can be used extensively in implant placement. Because of a lack of experimental reports regarding edentulous maxilla, we decided to evaluate the survival rate of immediately loaded dental implants in this area. Forty-three patients (44.4% male) with a median age of 55 years receiving 388 implants (mean 9.0 per case) were enrolled in this study. Cross-arch acrylic provisional restorations were performed in the same stage. Data were analyzed by Kaplan-Meier product limit estimation. Stratification of implants survival was performed for the available variables of interest, and comparisons were analyzed by a log rank test. Cox algorithm was used for multivariable analysis. At 5-year follow-up, the crude survival rate (overall survival not stratified according to any available variable) was 98%. All failures occurred within 6 months from loading. We found differences in survival relating to: 1) implant diameter (99.37% for diameter < or =5.25 mm and 93.75% for diameter >5.25 mm); 2) number of implants (99.29% for < or =10 implants and 96.30% for >10); and 3) gender (97.08% and 99.54% for males and females, respectively). Cox regression analysis showed that diameter of implants adjusted for patient age and gender was associated to an average risk of failure (hazard rate) of 3.13 (P value = 0.042, 95% confidence interval 1.04 to 9.43) per mm (from 3 to 6.5). Immediate functional loading is a reliable surgical-prosthetic procedure in edentulous maxillae. Implants with wider diameter are associated with a higher risk of failure.

Fabricating custom provisional restorations for the ITI solid abutment system

This article describes a technique for the quick and accurate fabrication of custom acrylic resin provisional restorations for the ITI implant system. Materials and procedures common to fixed prosthodontics are used. The technique should necessitate no more chairtime than the fabrication of custom acrylic provisional restorations for conventional fixed prostheses. (J Prosthet Dent 2002;88:105-7.)

Fabricating custom provisional restorations for the ITI solid abutment system

This article describes a technique for the quick and accurate fabrication of custom acrylic resin provisional restorations for the ITI implant system. Materials and procedures common to fixed prosthodontics are used. The technique should necessitate no more chairtime than the fabrication of custom acrylic provisional restorations for conventional fixed prostheses. (J Prosthet Dent 2002;88:105-7.)

Use of a flexible cast for the indirect fabrication of provisional restorations

Efficient fabrication of a clinically acceptable provisional restoration for a fixed partial denture is an important part of treatment success. Fabrication of provisional restorations that uses the indirect technique produces accurate fitting provisional restorations without the chemical and thermal irritation associated with direct fabrication. With a typodont model, an indirect method is presented that uses an elastic cast for fabrication of multiple unit provisional restorations for fixed partial dentures. The cast is available within 6 minutes of impression making, can be trimmed with a sharp scalpel, and provides flexibility that allows easy separation of the acrylic provisional from the cast. The cast can also be used to evaluate the clinical acceptability of the preparations before impression making. This method has also been successfully used for the fabrication of acrylic provisional restorations for onlay preparations. (J Prosthet Dent 1999;82:90-3.)