Acquisition Time Research Articles

Applications of artificial intelligence in radiology

Artificial intelligence (AI) is increasingly finding its way into routine radiological work. Presentation of the current advances and applications of AI along the entire radiological patient journey. Systematic literature review of established AI techniques and current research projects, with reference to consensus recommendations. The applications of AI in radiology cover awide range, starting with AI-supported scheduling and indications assessment, extending to AI-enhanced image acquisition and reconstruction techniques that have the potential to reduce radiation doses in computed tomography (CT) or acquisition times in magnetic resonance imaging (MRI), while maintaining comparable image quality. These include computer-aided detection and diagnosis, such as fracture recognition or nodule detection. Additionally, methods such as worklist prioritization and structured reporting facilitated by large language models enable arethinking of the reporting process. The use of AI promises to increase the efficiency of all steps of the radiology workflow and an improved diagnostic accuracy. To achieve this, seamless integration into technical workflows and proven evidence of AI systems are necessary. Applications of AI have the potential to profoundly influence the role of radiologists in the future.

Advancing 7T perfusion imaging by pulsed arterial spin labeling: Using a parallel transmit coil for enhanced labeling robustness and temporal SNR.

Non-invasive perfusion imaging by Arterial spin labeling (ASL) can be advantageous at Ultra-high field (UHF) MRI, since the image SNR and the T1 relaxation time both increase with the static field. However, ASL implementation, especially at 7T, is not trivial. Especially for ASL, UHF MRI comes with many challenges, mainly due to B1+ inhomogeneities. This study aimed to investigate the effects of different transmit coil configurations on perfusion-weighted imaging at 7T using a flow-sensitive alternating inversion recovery (FAIR) technique with time-resolved frequency offset corrected inversion (TR-FOCI) pulses for labeling and background suppression. We conducted a performance comparison between a parallel transmit (pTx) system equipped with 32 receive (Rx) and 8 transmit (Tx) channels and a standard setup with 32Rx and 2Tx channels. Our findings demonstrate that the pTx system, characterized by a more homogeneous B1 transmit field, resulted in a significantly higher contrast-to-noise ratio, temporal signal-to-noise ratio, and lower coefficient of variance (CoV) than the standard 2Tx setup. Additionally, both setups demonstrated comparable capabilities for functional mapping of the hand region in the motor cortex, achieving reliable results within a short acquisition time of approximately 5 minutes.

Deep learning MR reconstruction in knees and ankles in children and young adults. Is it ready for clinical use?

To evaluate the diagnostic performance and image quality of accelerated Turbo Spin Echo sequences using deep-learning (DL) reconstructions compared to conventional sequences in knee and ankle MRIs of children and young adults. IRB-approved prospective study consisting of 49 MRIs from 48 subjects (10 males, mean age 16.4years, range 7-29years), with each MRI consisting of both conventional and DL sequences. Sequences were evaluated blindly to determine predictive values, sensitivity, and specificity of DL sequences using conventional sequences and knee arthroscopy (if available) as references.Physeal patency and appearance were evaluated. Qualitative parameters were compared. Presence of undesired image alterations was assessed. The prevalence of abnormal findings in the knees and ankles were 11.7% (75/640), and 11.5% (19/165), respectively. Using conventional sequences as reference, sensitivity and specificity of DL sequences in knees were 90.7% and 99.3%, and in ankles were 100.0% and 100.0%. Using arthroscopy as reference, sensitivity and specificity of DL sequences were 80.0% and 95.8%, and of conventional sequences were 80.0% and 97.9%. Agreement of physeal status was 100.0%. DL sequences were qualitatively "same-or-better" compared to conventional (p < 0.032), except for pixelation artifact for the PDFS sequence (p = 0.233). No discrete image alteration was identified in the knee DL sequences. In the ankle, we identified one DL artifact involving a tendon (0.8%, 1/125). DL sequences were faster than conventional sequences by a factor of 2 (p < 0.001). In knee and ankle MRIs, DL sequences provided similar diagnostic performance and "same-or-better" image quality than conventional sequences at half the acquisition time.

Tracking gonadal development in fish: An in vivo MRI study on polar cod, Boreogadus saida (Lepechin, 1774).

Magnetic resonance imaging (MRI) was applied to determine the sex of polar cod (Boreogadus saida Lepechin, 1774) (Actinopterygii: Gadidae) and to follow the gonadal development in individual animals over time. Individual unanaesthetised fish were transferred to a measurement chamber inside a preclinical 9.4T MRI scanner and continuously perfused with aerated seawater. A screening procedure at an average of 3.5h, consisting of a set of MRI scans of different orientations, was repeated every 4 weeks on the same set of reproducing B.saida (n= 10) with a body length of about 20 cm. Adapted multi-slice flow-compensated fast low-angle shot (FcFLASH) and rapid acquisition with relaxation enhancement (RARE) protocols with an in-plane resolution of 313 μm and an acquisition time of 2.5min were used to visualise the morphology of various organs, including the gonads within the field of view (FOV). The MR images provided high resolution, enabling specific sex determination, calculation of gonad volumes, and determination of oocyte sizes. Gonad maturation was followed over 4 months from November 2021 until shortly before spawning in February 2022. The gonad volume increased by 2.3-25.5% for males and by 11.5-760.7% for females during the observation period. From October to February, the oocyte diameter increased from 427 μm (n= 1) to 1346 ± 27 μm (n= 4). Interestingly, individual oocytes showed changes in MR contrast over time that can be attributed to the morphological development of the oocytes. The results fit well with previous literature data from classical invasive studies. The presented approach has great potential for various ecophysiological applications such as monitoring natural or delayed development of internal organs or sex determination under different environmental conditions.

FAST (fast analytical simulator of tracer)-PET: an accurate and efficient PET analytical simulation tool

Objective. Simulation of positron emission tomography (PET) images is an essential tool in the development and validation of quantitative imaging workflows and advanced image processing pipelines. Existing Monte Carlo or analytical PET simulators often compromise on either efficiency or accuracy. We aim to develop and validate fast analytical simulator of tracer (FAST)-PET, a novel analytical framework, to simulate PET images accurately and efficiently. Approach. FAST-PET simulates PET images by performing precise forward projection, scatter, and random estimation that match the scanner geometry and statistics. Although the same process should be applicable to other scanner models, we focus on the Siemens Biograph Vision-600 in this work. Calibration and validation of FAST-PET were performed through comparison with an experimental scan of a National Electrical Manufacturers Association (NEMA) Image Quality (IQ) phantom. Further validation was conducted between FAST-PET and Geant4 Application for Tomographic Emission (GATE) quantitatively in clinical image simulations in terms of intensity-based and texture-based features and task-based tumor segmentation. Main results. According to the NEMA IQ phantom simulation, FAST-PET’s simulated images exhibited partial volume effects and noise levels comparable to experimental images, with a relative bias of the recovery coefficient RC within 10% for all spheres and a coefficient of variation for the background region within 6% across various acquisition times. FAST-PET generated clinical PET images exhibit high quantitative accuracy and texture comparable to GATE (correlation coefficients of all features over 0.95) but with ∼100-fold lower computation time. The tumor segmentation masks comparison between both methods exhibited significant overlap and shape similarity with high concordance CCC > 0.97 across measures. Significance. FAST-PET generated PET images with high quantitative accuracy comparable to GATE, making it ideal for applications requiring extensive PET image simulations such as virtual imaging trials, and the development and validation of image processing pipelines.

B-Spline signature responses in structural change detection: method development

Damage detection is perhaps the most critical objective of structural health monitoring. Proper documentation of the progression of structural damage from onset to failure enables performance-based maintenance that mitigates risk and contains socioeconomic impact. Recently, damage detection methods that focus on change detection through analyses of the structural global response in the frequency or time domain have garnered attention due to their efficiency and accuracy. This work proposes a novel time-domain, nonparametric, data-driven change detection method. The time-domain B-Spline transfer function is defined as a signature time history response of the structure, referred to in this work as the B-Spline signature response (BSR). BSR may be computed directly through a physics-based simulation, or it be extracted in a discrete form from measurements of displacement, velocity, or acceleration time histories of structural response to any external excitation. The BSR is independent of loading, is a characteristic of the system, and captures the condition of the structure at the time of acquisition without the need for identifying structural properties. In this work, the fundamentals of the BSR concept are introduced first along with the process of extracting a BSR from structural responses to arbitrary excitations. Verification and validation studies are conducted based on computer simulations and laboratory testing and are discussed in detail. Subsequently, an approach is proposed to detect change through correlation of BSR signals acquired at different times during the monitoring period. Any changes in the intrinsic characteristics affecting the response cause BSR changes and correlation loss. The change detection methodology is demonstrated through computer simulations and experimental investigations. Initial parametric studies are conducted to investigate the suitability of the proposed approach to detect small structural changes. This article demonstrates the validity of the proposed method and establishes the framework for further development and case-specific applications.

Simultaneous whole-liver water and mapping with isotropic resolution during free-breathing.

To develop and validate a data acquisition scheme combined with a motion-resolved reconstruction and dictionary-matching-based parameter estimation to enable free-breathing isotropic resolution self-navigated whole-liver simultaneous water-specific ( ) and ( ) mapping for the characterization of diffuse and oncological liver diseases. The proposed data acquisition consists of a magnetization preparation pulse and a two-echo gradient echo readout with a radial stack-of-stars trajectory, repeated with different preparations to achieve different and contrasts in a fixed acquisition time of 6 min. Regularized reconstruction was performed using self-navigation to account for motion during the free-breathing acquisition, followed by water-fat separation. Bloch simulations of the sequence were applied to optimize the sequence timing for insensitivity at 3 T, to correct for relaxation-induced blurring, and to map and using a dictionary. The proposed method was validated on a water-fat phantom with varying relaxation properties and in 10 volunteers against imaging and spectroscopy reference values. The performance and robustness of the proposed method were evaluated in five patients with abdominal pathologies. Simulations demonstrate good insensitivity of the proposed method in measuring and values. The proposed method produces co-registered and maps with a good agreement with reference methods (phantom: ; ). The proposed and mapping exhibits good repeatability and can be robustly performed in patients with pathologies. The proposed method allows whole-liver and quantification with high accuracy at isotropic resolution in a fixed acquisition time during free-breathing.

Cardiac Cine MRI Using a Commercially Available 0.55-T Scanner.

Purpose To compare parameters of left ventricular (LV) and right ventricular (RV) volume and function between a commercially available 0.55-T low-field-strength cardiac cine MRI scanner and a 1.5-T scanner. Materials and Methods In this prospective study, healthy volunteers (May 2022 to July 2022) underwent same-day cine imaging using both scanners (0.55 T, 1.5 T). Volumetric and functional parameters were assessed by two experts. After analyzing the results of a blinded crossover reader study of the healthy volunteers, 20 participants with clinically indicated cardiac MRI were prospectively included (November 2022 to February 2023). In a second blinded expert reading, parameters from clinical 1.5-T scans in these participants were compared with those same-day 0.55-T scans. Results are displayed as Bland-Altman plots. Results Eleven healthy volunteers (mean age: 33 years [95% CI: 27, 40]; four of 11 [36%] female, seven of 11 [64%] male) were included. Very strong mean correlation was observed (r = 0.98 [95% CI: 0.97, 0.98]). Average deviation between MRI systems was 1.6% (95% CI: 0.3, 2.9) for both readers. Twenty participants with clinically indicated cardiac MRI were included (mean age: 55 years [95% CI: 48, 62], six of 20 [30%] female, 14 of 20 [70%] male). Mean correlation was very strong (r = 0.98 [95% CI: 0.97, 0.98]). LV and RV parameters demonstrated an average deviation of 1.1% (95% CI: 0.1, 2.1) between MRI systems. Conclusion Cardiac cine MRI at 0.55 T yielded comparable results for quantitative biventricular volumetric and functional parameters compared with routine imaging at 1.5 T, if acquisition time is doubled. Keywords: Cardiac, Comparative Studies, Heart, Cardiovascular MRI, Cine, Myocardium Supplemental material is available for this article. ©RSNA, 2024.

Deep Learning Reconstruction of Accelerated MRI: False-Positive Cartilage Delamination Inserted in MRI Arthrography Under Traction.

The radiological imaging industry is developing and starting to offer a range of novel artificial intelligence software solutions for clinical radiology. Deep learning reconstruction of magnetic resonance imaging data seems to allow for the acceleration and undersampling of imaging data. Resulting reduced acquisition times would lead to greater machine utility and to greater cost-efficiency of machine operations. Our case shows images from magnetic resonance arthrography under traction of the right hip joint from a 30-year-old, otherwise healthy, male patient. The undersampled image data when reconstructed by a deep learning tool can contain false-positive cartilage delamination and false-positive diffuse cartilage defects. In the future, precision of this novel technology will have to be put to thorough testing. Bias of systems, in particular created by the choice of training data, will have to be part of those assessments.

Improvement of MRS at ultra-high field using a wireless RF array.

We aim to assess a straightforward technique to enhance spectral quality in the brain, particularly in the cerebellum, during 7 T MRI scans. This is achieved through a wireless RF array insert designed to mitigate signal dropouts caused by the limited transmit field efficiency in the inferior part of the brain. We recently developed a wireless RF array to improve MRI and 1H-MRS at 7 T by augmenting signal via inductive coupling between the wireless RF array and the MRI coil. In vivo experiments on a Siemens 7 T whole-body human scanner with a Nova 1Tx/32Rx head coil quantified the impact of the dorsal cervical array in improving signal in the posterior fossa, including the cerebellum, where the transmit efficiency of the coil is inherently low. The 1H-MRS experimental protocol consisted of paired acquisition of data sets, both with and without the RF array, using the semi-LASER and SASSI sequences. The overall results indicate that the localized 1H-MRS is improved significantly in the presence of the array. Comparison of in vivo 1H-MRS plots in the presence versus absence of the array demonstrated an average SNR enhancement of a factor of 2.2. LCModel analysis reported reduced Cramér-Rao lower bounds, indicating more confident fits. This wireless RF array can significantly increase detection sensitivity. It may reduce the RF transmission power and data acquisition time for 1H-MRS and MRI applications, specifically at 7 T, where 1H-MRS requires a high-power RF pulse. The array could provide a cost-effective and efficient solution to improve detection sensitivity for human 1H-MRS and MRI in the regions with lower transmit efficiency.

Small, Fluorinated Mn2+ Chelate as an Efficient 1H and 19F MRI Probe.

We explore the potential of fluorine-containing small Mn2+ chelates as alternatives to perfluorinated nanoparticles, widely used as 19F MRI probes. In MnL1, the cyclohexanediamine skeleton and two piperidine rings, involving each a metal-coordinating amide group and an appended CF3 moiety, provide high rigidity to the complex. This allows for good control of the Mn-F distance (rMnF = 8.2±0.2 Å determined from 19F relaxation data), as well as for high kinetic inertness (a dissociation half-life of 1285 h is estimated for physiological conditions). The paramagnetic Mn2+ leads to a ~150-fold acceleration of the longitudinal 19F relaxation, with moderate line-broadening effect, resulting in T2/T1 ratios of 0.8 (9.4 T). Owing to its inner sphere water molecule, MnL1 is a good 1H relaxation agent as well (r1 = 5.36 mM-1s-1 at 298K, 20MHz). MnL1 could be readily visualized in 19F MRI by using fast acquisition techniques, both in phantom images and living mice following intramuscular injection, with remarkable signal-to-noise ratios and short acquisition times. While applications in targeted imaging or cell therapy monitoring require further optimisation of the molecular structure, these results argue for the potential of such small, monohydrated and fluorinated Mn2+ complexes for combined 19F and 1H MRI detection.

Optimization of acquisition patterns for establishing inter CubeSat optical communications

As commercially available CubeSats with up to six standardized units cannot achieve the precision required for an instantaneous establishment of a low-divergence optical inter-satellite link, search patterns are used to scan the remaining field of uncertainty. This analysis optimizes the simultaneously executed search pattern combinations of the two laser communication terminals involved. Based on a Monte Carlo simulation, the perturbations on these links are investigated, and the corresponding key performance parameters such as mean acquisition time and success rate are calculated. The results are penalized by the hardware specifications, including actuator and sensor bandwidths, given by their design. Residual attitude error components imply a significant influence on the acquisition process and are therefore presented within this work. The pattern pairs are fed through an automated optimization algorithm to tune and analyze them. In this particular scenario of two CubeISL models, the mean duration for a first detected acquisition hit is within a pattern period of 3.2 s for the best performing pairs spiral-rose and lissajous-rose. Assuming an uncertainty field of ±0.2deg due to limited attitude knowledge, success rates between 82.3% and 99.9% are achieved.

Small, Fluorinated Mn2+ Chelate as an Efficient 1H and 19F MRI Probe

We explore the potential of fluorine‐containing small Mn2+ chelates as alternatives to perfluorinated nanoparticles, widely used as 19F MRI probes. In MnL1, the cyclohexanediamine skeleton and two piperidine rings, involving each a metal‐coordinating amide group and an appended CF3 moiety, provide high rigidity to the complex. This allows for good control of the Mn‐F distance (rMnF = 8.2±0.2 Å determined from 19F relaxation data), as well as for high kinetic inertness (a dissociation half‐life of 1285 h is estimated for physiological conditions). The paramagnetic Mn2+ leads to a ~150‐fold acceleration of the longitudinal 19F relaxation, with moderate line‐broadening effect, resulting in T2/T1 ratios of 0.8 (9.4 T). Owing to its inner sphere water molecule, MnL1 is a good 1H relaxation agent as well (r1 = 5.36 mM‐1s‐1 at 298K, 20MHz). MnL1 could be readily visualized in 19F MRI by using fast acquisition techniques, both in phantom images and living mice following intramuscular injection, with remarkable signal‐to‐noise ratios and short acquisition times. While applications in targeted imaging or cell therapy monitoring require further optimisation of the molecular structure, these results argue for the potential of such small, monohydrated and fluorinated Mn2+ complexes for combined 19F and 1H MRI detection.

Analisis Hasil Safire pada Imaging CT Scan Kepala

Background: Iterative Reconstruction (IR) method was first applied to CT in 1960 and successfully used for the first time in clinical research by reconstructing 128 x 128 images according to image metrics and using high-resolution images of 512 x 512 for special research activities such as image evaluation. artifacts and noise. In 2008, the development of IR can improve image quality and reduce the amount of radiation in clinical CT diagnosis. Iterative reconstruction promises to improve image quality while reducing radiation dose. This has been demonstrated in CT of the thorax, coronary arteries, abdomen, spine and neck, paranasal sinuses, and head. Sinogram-Afirmed Iterative Reconstruction (SAFIRE) is one of the iterative algorithm reconstruction methods that uses noise modeling techniques, Sinogram-Afirmed Iterative Reconstruction (SAFIRE), promises to improve Cranial CT (CCT). In this new technique, raw data-based iteration for artifact reduction is combined with image-based iteration using smooth regularization that estimates the variance of image noise in various directions at each image pixel and adjusts it with a spatial variance regularization function simultaneously. Methods: This study is a literature review, where literature exploration is carried out on various databases with keywords such as, Reference sources used in compiling this article include google scollar, as well as articles in English and Indonesian scientific journals. Results: Itarative Reconstruction (IR) Head CT Scan, SAFIRE includes reducing or adding noise to the image results, artifacts, acquisition time, increasing SNR and CNR and reducing dose in the examination. Conclusion: Analysis of Safire results in Head CT-Scan Imaging has an Itarative Reconstruction (SAFIRE) procedure, the role of safire in head CT scans is to optimize noise in the Reconstructed image and can reduce artifacts in the image and increase SNR, CNR in the Reconstructed results so that it can provide better information.

A global urban heat island intensity dataset: Generation, comparison, and analysis

The urban heat island (UHI) effect, a phenomenon of local warming over urban areas, is the most well-known impact of urbanization on climate. Globally consistent estimates of the UHI intensity (UHII) are crucial for examining this phenomenon across time and space. However, publicly available UHII datasets are limited and have several constraints: (1) they are for clear-sky surface UHII, not all-sky surface UHII and canopy (air temperature) UHII; (2) the estimation methods often neglect anthropogenic disturbance, introducing uncertainties in the estimated UHII. To address these issues, this study proposes a new dynamic equal-area (DEA) method that can minimize the influence of various confounding factors on UHII estimates through a dynamic cyclic process. Utilizing the DEA method and leveraging various gridded temperature data, we develop a global-scale (>10,000 cities), long-term (over 20 years by month), and multi-faceted (clear-sky surface, all-sky surface, and canopy) UHII dataset. Based on these estimates, we provide a comprehensive analysis of the UHII and its trends in global cities. The UHII is found to be greater than zero in >80% of cities, with global annual average magnitudes around 1.0 °C (day) and 0.8 °C (night) for surface UHII, and close to 0.5 °C for canopy UHII. Furthermore, an interannual upward trend in UHII is observed in >60% of cities, with global annual average trends exceeding 0.1 °C/decade (day) and over 0.06 °C/decade (night) for surface UHII, and slightly surpassing 0.03 °C/decade for canopy UHII. Notably, there exists a positive correlation between the magnitude and trend of UHII, suggesting that cities with stronger UHII tend to experience faster growth in UHII. Additionally, discrepancies in UHII are found between different temperature data, stemming not only from distinctions in data types (surface or air temperature) but also from differences in data acquisition times (Terra or Aqua), weather conditions (clear-sky or all-sky), and processing methodologies (with or without gap filling). Overall, our proposed method, dataset, and analysis results have the potential to provide valuable insights for future urban climate studies. The UHII dataset is publicly available at https://doi.org/10.6084/m9.figshare.24821538.

Research on deep learning restoration algorithm of X-ray backscatter imaging based on virtual training dataset

The X-ray lobster eye lens, an innovative technique for focusing high-energy radiation, enables wide-field X-ray imaging. However, its inherent cross point spread function introduces noise and degradation into the resultant images. Conventional image restoration methods are inadequate for suppressing such noise. This paper introduces a backscatter image restoration technique utilizing a virtual training dataset. By convolving the point spread function (PSF) with an object to simulate the image degradation process, the method generates a multitude of convolved images for deep learning training, eliminating the need for manual annotation. Given the high structural similarity between the synthetic convolved images and actual backscatter images, the trained model effectively restores real backscatter images. The restoration process yields a structural similarity index (SSIM) of 0.86 and a mean intersection over union (MIoU) of 0.83 when compared to the reference images. This approach mitigates the limitations of sparse real backscatter datasets, substantially reducing image acquisition time, decreasing radiation flux, and enhancing system safety.

Tensor-Based Statistical Learning Methods for Diagnosing Product Quality Defects in Multistage Manufacturing Processes

Multistage manufacturing processes with identical stages provide three-dimensional process data in which the first dimension represents the process (control/sensing) variable, the second is the stage, and the third is the measurement/sampling/data acquisition time point. Diagnosing quality faults in such processes often requires the simultaneous identification of crucial process variables and stages associated with product quality anomalies. Most existing diagnosis methods convert 3D data into a 2D matrix, resulting in loss of information and reduced diagnostic accuracy and stability. To address this challenge, we propose a penalized tensor regression model that regresses the product quality index against its 3D process data. For the estimation of high-dimensional regression coefficients with the limited amount of historical data, we apply the CANDECOMP/PARAFAC and Tucker decompositions to the coefficient tensor, which significantly reduces the number of parameters to be estimated. Based on the decompositions, a new regularization term is designed to enable the joint identification of critical process variables and stages. To estimate the parameters, we develop the block coordinate proximal descent algorithm and provide its convergence guarantee. Numerical studies demonstrate that the proposed methods can enhance diagnostic stability and on average improve the diagnostic accuracy by around 20% over existing benchmarks.

Computer simulation and modeling of glow discharge optical emission coded aperture elemental mapping

BackgroundElemental mapping (EM) yields necessary insights into mechanisms of interest in solid samples across multiple disciplines. There are several EM techniques available but long acquisition time is a common limitation. Glow discharge optical emission spectroscopy (GDOES) allows direct quantitative multi-EM at very high throughput (∼10 s s) when coupled to traditional hyperspectral imaging (HSI) techniques. However, GDOES consumes the sample via sputtering, such that traditional HSI sequential scanning requirements lead to loss of information/resolution, which is compounded for multi-EM and limits nanomaterials analysis. Thus, there is a need for faster HSI to enable GDOES multi-EM of nanoscale materials. ResultsHere, a new technique is described, Glow discharge Optical emission Coded Aperture elemental Mapping (GOCAM), that takes advantage of compressive coded aperture spectral imaging to enable multi-EM in a single camera exposure. In this first phase of development, computer model simulations were implemented to study the effects of coded aperture parameters on data fidelity, which showed the best fidelity is achieved at smaller mask element sizes and transmittance of 60 %. In addition, SeSCIGPU demonstrated the best fidelity performance compared to several compressed sensing reconstruction algorithms, including TwIST, GAP-TV, SeSCICPU, and ADMM-TV, as evaluated by studying the effects of varying the corresponding hyperparameters. SignificanceThis study shows GOCAM's feasibility and provides a starting point for the second phase hardware development currently underway. GOCAM's potential to allow multi-EM from solid surfaces in a fraction of a second will be particularly enabling for nanostructured materials characterization.

Research on a Near-Field Millimeter Wave Imaging Algorithm and System Based on Multiple-Input Multiple-Output Sparse Sampling

In order to reduce the hardware cost and data acquisition time in near-field scenarios, such as airport security imaging systems, this paper discusses the layout of a multiple-input multiple-output (MIMO) radar array. In view of the existing multi-input multiple-output imaging algorithm, the reconstructed image artifacts and aliasing problems caused by sparse sampling are discussed. In this paper, a multi-station radar array and a corresponding sparse MIMO imaging algorithm based on combined sparse sub-channels are proposed. By studying the wave–number spectrum of backscattered MIMO synthetic aperture radar (SAR) data, the nonlinear relationship between the wave number spectrum and reconstructed image is established. By selecting a complex gain vector, multiple channels are coherently combined effectively, thus eliminating aliasing and artifacts in the reconstructed image. At the same time, the algorithm can be used for the MIMO–SAR configuration of arbitrarily distributed transmitting and receiving arrays. A new multi-station millimeter wave imaging system is designed by using a frequency-modulated continuous wave (FMCW) chip and sliding rail platform as a planar SAR. The combination of the hardware system provides reconfiguration, convenience and economy for the combination of millimeter wave imaging systems in multiple scenes.

Field-domain rapid-scan EPR at 240 GHz for studies of protein functional dynamics at room temperature

We present field-domain rapid-scan (RS) electron paramagnetic resonance (EPR) at 8.6T and 240GHz. To enable this technique, we upgraded a home-built EPR spectrometer with an FPGA-enabled digitizer and real-time processing software. The software leverages the Hilbert transform to recover the in-phase (I) and quadrature (Q) channels, and therefore the raw absorptive and dispersive signals, χ′ and χ′′, from their combined magnitude (I2+Q2). Averaging a magnitude is simpler than real-time coherent averaging and has the added benefit of permitting long-timescale signal averaging (up to at least 2.5×106 scans) because it eliminates the effects of source-receiver phase drift. Our rapid-scan (RS) EPR provides a signal-to-noise ratio that is approximately twice that of continuous wave (CW) EPR under the same experimental conditions, after scaling by the square root of acquisition time. We apply our RS EPR as an extension of the recently reported time-resolved Gd-Gd EPR (TiGGER) [Maity et al., 2023], which is able to monitor inter-residue distance changes during the photocycle of a photoresponsive protein through changes in the Gd-Gd dipolar couplings. RS, opposed to CW, returns field-swept spectra as a function of time with 10ms time resolution, and thus, adds a second dimension to the static field transients recorded by TiGGER. We were able to use RS TiGGER to track time-dependent and temperature-dependent kinetics of AsLOV2, a light-activated phototropin domain found in oats. The results presented here combine the benefits of RS EPR with the improved spectral resolution and sensitivity of Gd chelates at high magnetic fields. In the future, field-domain RS EPR at high magnetic fields may enable studies of other real-time kinetic processes with time resolutions that are otherwise difficult to access in the solution state.