Channel State Information Acquisition Research Articles

Channel reconstruction through improvised deep learning architecture for high-speed networks

Efficient acquisition of channel state information (CSI) is quite complicated process but immensely essential to exploit probable benefits of massive multiple input multiple output (MIMO) systems. Therefore, a deep learningbased model is utilized to estimate channel feedback in a massive MIMO system. The proposed improvised deep learning-based channel estimation (IDLCE) model enhances channel reconstruction efficiency by using multiple convolutional layers and residual blocks. The proposed IDLCE model utilizes encoder network to compress CSI matrices where decoder network is used to downlink reconstruct CSI matrices. Here, an additional quantization block is incorporated to improve feedback reconstruction accuracy by reducing channel errors. A COST 2,100 model is adopted to analyse performance efficiency for both indoor and outdoor scenarios. Further, deep learning-based model is used to train thousands of parameter and correlation coefficients much faster and to minimize computational complexity. The proposed IDLCE model evaluate performance in terms of normalized mean square error (NMSE), correlation efficiency and reconstruction accuracy and compared against varied state-of-art-channel estimation techniques. Excellent performance results are obtained with large improvement in channel reconstruction accuracy

Statistical spatial information based power optimization algorithm for multi-user massive MIMO systems

Power optimization has a significant role in multi-user massive multiple-input and multiple-output (mMIMO) wireless communication systems, whereas the acquisition of instantaneous channel state information (I-CSI) is a serious challenge in practical scenarios. The statistical spatial information (SPI), which contains angle-of-departures (AoDs) and corresponding large-scale fading factors, is slowly varying. The power optimization based on SPI to improve system performance needs to be explored for multi-user mMIMO systems. In this paper, two novel algorithms for SPI-based power optimization are proposed to maximize the ergodic sum-rate (ESR) under total power constraint for the system. Specifically, the minorization-maximization-based power optimization (MM-PO) algorithm and the closed-form power optimization (CF-PO) algorithm are proposed utilizing the minorization-maximization (MM) method and the fractional programming (FP) method, respectively. Moreover, the ESR is expressed based on the extracted SPI. The approximate expression of the ESR is derived. The complexity of the algorithms depends on the number of users, and the algorithms are scalable in the system. The proposed algorithms can effectively achieve the advantages of SPI while being robust to the uncertainty of I-CSI. Simulation results verify the ESR of our two proposed algorithms is 1.47 and 1.4 times higher than that of the equal power allocation algorithm at a high SNR when the number of antenna and user are equal to 64 and 20, respectively.

Analysis of the outage performance of energy-harvesting cooperative-NOMA system with relay selection methods

Recent years have witnessed the remarkable progress in wireless communication systems due to the escalating demand for higher data rates, improved reliability, and increased energy efficiency. In this regard, Non-Orthogonal Multiple Access (NOMA) has emerged as a promising technology, enhancing spectral efficiency and accommodating multiple users concurrently within the same time and frequency resources. Simultaneously, the energy harvesting has surfaced as a sustainable solution, converting ambient environmental energy into usable electrical power for operating communication nodes. This paper proposes a cooperative NOMA transmission scheme integrating energy harvesting and utilizing Least Squares (LS) channel estimation for precise Channel State Information (CSI) acquisition. The objective is to establish an optimal communication path from source to destination. Relay selection methods: Optimal Relay Selection (ORS) and Max-Min Relay Selection (MMRS), are compared, focusing on their impact on the system performance. The analysis considers the influence of the number of relays and power allocation factor on the system, with a specific emphasis on the outage probability expressions. Comparative analysis between the cooperative-NOMA and the traditional cooperative relaying without NOMA reveals the superior performance of the cooperative-NOMA. Additionally, the ORS scheme outperforms MMRS in terms of the outage performance.

Robust Beamforming Optimization Design for RIS-Aided MIMO Systems With Practical Phase Shift Model and Imperfect CSI

The ideal phase shift model and the acquisition of channel state information (CSI) are practically difficult to realize in reconfigurable intelligent surface (RIS) assisted communication systems. Therefore, these have greatly troubled the beamforming design of multiple-input multiple-output (MIMO) systems via RIS. This paper presents a robust beamforming design framework in the RIS-enhanced MIMO communication networks in the presence of considering practical phase shifts for the RIS and imperfect CSI of the cascade channels. More specifically, we propose an alternative optimization framework and adopt the distributed alternating direction method of multipliers (ADMM) method to solve the sum-rate maximization problem by combining the true environment model (TEM) and the mismatch environment model (MEM) with beamforming. In particular, the proposed scheme is also used for the MEM scenario. It shows that the sum rate of the ADMM scheme with MEM under low SNR is about 3 bps/Hz more than the BFP method, approximately 6 bps/Hz more than the APG method. Next, when the SNR is 5dB, the above three schemes are greater than SDR method. But, the above methods are smaller than SDR method in MEM. Then, the sum rate of the SDR method with the TEM is approximately 1.6 times of the MEM, while the CPU time of both is consistent with the computational complexity. Therefore, the differences between the two models affect the performance achieved by different methods. The proposed approach sheds a light to engineers working in wireless communication on enhancing the transmission robustness of existing wireless networks.

Joint channel training and passive beamforming design for intelligent reflecting surface-aided LoRa systems

<abstract><p>In order to examine the potential and synergetic aspects of intelligent reflecting surface (IRS) techniques for Internet-of-Things (IoT), we study an IRS-aided Long Range (LoRa) system in this paper. Specifically, to facilitate the acquisition of accurate channel state information (CSI) for effective reflection of LoRa signals, we first propose an optimal training design for the least squares channel estimation with LoRa modulation, and then, by utilizing the acquired CSI, we develop a high-performing passive beamforming scheme based on a signal-to-ratio (SNR) criterion. Numerical results show that the proposed training design considerably outperforms the baseline schemes, and the proposed passive beamforming design results in a significant improvement in performance over that of the conventional LoRa system, thereby demonstrating the feasibility of extending coverage areas of LoRa systems with the aid of IRS.</p></abstract>

Demonstration of Underwater Channel State Information Acquisition in Grand Passage, Nova Scotia

Demonstration of Underwater Channel State Information Acquisition in Grand Passage, Nova Scotia

Machine learning based low-complexity channel state information estimation

In 5G communications, the acquisition of accurate channel state information (CSI) is of great importance to the hybrid beamforming of millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) system. In classical mmWave MIMO channel estimation methods, the exploitation of inherent sparse or low-rank structures has demonstrated to improve the performance. However, most high-accurate CSI estimators incur a high computational complexity and require the prior channel information, which hence present the major challenges in the practical deployment. In this work, we leverage machine learning to design the low-complexity and high-performance channel estimator. To be specific, we first formulate the CSI estimation, in the case of sparse structure, as one classical least absolute shrinkage and selection operator problem. In order to reduce the time complexity of existing compressed sensing (CS) methods, we then approximate the original optimization problem to another one, by imposing the other low-rank constraint that was barely considered by CS. We thus solve this new approximated problem and attain the near-optimal solution of the original problem. One new method excludes any prior channel information, and greatly improves the estimation performance, which only incurs a low time complexity. Simulation results demonstrate the superiority of our proposed method both in the estimation accuracy and time complexity.

Human Activity Recognition Using Self-Powered Sensors Based on Multilayer Bidirectional Long Short-Term Memory Networks

Sensor-based Human Activity Recognition (HAR) requires the acquisition of Channel State Information(CSI) data with time series based on sensors to predict human behavior. Many existing approaches are based on wearable sensors and cameras, which increase the burden and privacy issues for patients. Self-powered sensors are capable of non-contact collection of time series data generated by human activity while ensuring their own stable operation. In this paper, we propose a deep learning-based framework for contactless real-time activity detection of humans using self-powered sensors, which is called Multilayer Bi-directional Long Short-Term Memory (MBLSTM). The collected WIFI CSI data are fed into our proposed network model, which is then used to learn representative features of both sides from the original continuous CSI measurements. And the attention model is used to assign different weights to the learned features, and finally activity recognition is performed. Experimental results show that our proposed method achieves an accuracy of more than 96% for the recognition of six activities in multiple rounds of testing, outperforming other benchmark methods used for comparison.

Two-Stage Channel Estimation for mmWave Massive MIMO Systems Based on ResNet-UNet

For millimeter wave massive multiple-input multiple-output systems, the transceiver usually adopts a hybrid precoding structure to reduce complexity and cost, which poses great challenges to the acquisition of channel state information, especially in the case of low signal-to-noise ratio regime. In this article, residual network (ResNet) is employed to address this problem. Firstly, we design a two-stage channel estimation structure to improve the accuracy of channel estimation. Then, we take ResNet as the basic network and integrate UNet structure to build ResNet-UNet model to solve the model degradation problem. Moreover, we use noise2noise algorithm to train the neural network in order to implement the channel estimation in the case that a clean pilot cannot be obtained. Numerical results show that compared with the traditional channel estimation algorithms and deep convolutional neural network algorithm, the proposed approach has higher accuracy and robustness, and achieves performance close to the denoising algorithm using clean targets that is very difficult to be implemented in practical situations.

A Spatial Delay Domain-Based Prony Channel Prediction Method for Massive MIMO LEO Communications

Massive multiple-input–multiple-output (massive MIMO)-based low Earth orbit (LEO) intersatellite link communications is a promising research topic for the fifth generation (5G) and forthcoming sixth generation (6G) wireless networks. However, due to the fast relative movement between the transmitter and receiver in LEO satellites, intersatellite link communication is facing serious Doppler shifts and delays, which makes it difficult to obtain the accurate channel state information (CSI). Therefore, this article proposes an improved channel prediction method, that is, spatial-delay domain-based Prony (SDD-Prony) prediction, which not only realizes the accurate CSI acquisition for massive MIMO-based LEO intersatellite link systems but also substantially reduces the computational complexity. In particular, it is shown that the prediction error of the proposed method can converge to zero with the increase in antenna number and bandwidth. In addition, we combine the SDD-Prony prediction method with the total least squares method to reduce the influence of the noise and error components on the prediction accuracy, which further improves the prediction performance. The effectiveness of the proposed method is demonstrated by a theoretical proof and simulation results.

Co-Efficient Vector Based Differential Distributed Quasi-Orthogonal Space Time Frequency Coding.

Distributed space time frequency coding (DSTFC) schemes address problems of performance degradation encountered by cooperative broadband networks operating in highly mobile environments. Channel state information (CSI) acquisition is, however, impractical in such highly mobile environments. Therefore, to address this problem, designers focus on incorporating differential designs with DSTFC for signal recovery in environments where neither the relay nodes nor destination have CSI. Traditionally, unitary matrix-based differential designs have been used to generate the differentially encoded symbols and codeword matrices. Unitary based designs are suitable for cooperative networks that utilize the amplify-and-forward protocol where the relay nodes are typically required to forego differential decoding. In considering other scenarios where relay nodes are compelled to differentially decode and re-transmit information signals, we propose a novel co-efficient vector differential distributed quasi-orthogonal space time frequency coding (DQSTFC) scheme for decode-and-forward cooperative networks. Our proposed space time frequency coding scheme relaxes the need for constant channel gain in the temporal and frequency dimensions over long symbol periods; thus, performance degradation is reduced in frequency-selective and time-selective fading environments. Simulation results illustrate the performance of our proposed co-efficient vector differential DQSTFC scheme under different channel conditions. Through pair-wise error probability analysis, we derive the full diversity design criteria for our code.

Review on Channel Estimation for Reconfigurable Intelligent Surface Assisted Wireless Communication System

With the dramatic increase in the number of mobile users and wireless devices accessing the network, the performance of fifth generation (5G) wireless communication systems has been severely challenged. Reconfigurable intelligent surface (RIS) has received much attention as one of the promising technologies for the sixth generation (6G) due to its ease of deployment, low power consumption, and low price. RIS is an electromagnetic metamaterial that serves to reconfigure the wireless environment by adjusting the phase, amplitude, and frequency of the wireless signal. To maximize channel transmission efficiency and improve the reliability of communication systems, the acquisition of channel state information (CSI) is essential. Therefore, an effective channel estimation method guarantees the achievement of excellent RIS performance. This survey presents a comprehensive study of existing channel estimation methods for RIS. Firstly, channel estimation methods in high and low frequency bands are overviewed and compared. We focus on channel estimation in the high frequency band and analyze the system model. Then, the comprehensive description of the different channel estimation methods is given, with a focus on the application of deep learning. Finally, we conclude the paper and provide an outlook on the future development of RIS channel estimation.

Sensing RISs: Enabling Dimension-Independent CSI Acquisition for Beamforming

Reconfigurable intelligent surfaces (RISs) are envisioned as a potentially transformative technology for future wireless communications. However, RISs' inability to process signals and the attendant increased channel dimension have brought new challenges to RIS-assisted systems, including significantly increased pilot overhead required for channel estimation. To address these problems, several prior contributions that enhance the hardware architecture of RISs or develop algorithms to exploit the channels' mathematical properties have been made, where the required pilot overhead is reduced to be proportional to the number of RIS elements. In this paper, we propose a dimension-independent channel state information (CSI) acquisition approach in which the required pilot overhead is independent of the number of RIS elements. Specifically, in contrast to traditional signal transmission methods, where signals from the base station (BS) and the users are transmitted in different time slots, we propose a novel method in which signals are transmitted from the BS and the user simultaneously during CSI acquisition. With this method, an electromagnetic interference random field (IRF) will be induced on the RIS, and we propose the structure of sensing RIS to capture its features. Moreover, we develop three algorithms for parameter estimation in this system, in which one of the proposed vM-EM algorithm is analyzed with the fixed-point perturbation method to obtain an asymptotic achievable bound. In addition, we also derive the Cram\'er-Rao lower bound (CRLB) and an asymptotic expression for characterizing the best possible performance of the proposed algorithms. Simulation results verify that our proposed signal transmission method and the corresponding algorithms can achieve dimension-independent CSI acquisition for beamforming.

Deep Learning-Based Soft Iterative-Detection of Channel-Coded Compressed Sensing-Aided Multi-Dimensional Index Modulation

The concept of Index Modulation (IM) has been actively researched as a benefit of its flexible trade-off between performance, achievable rate, energy efficiency, hardware cost and complexity. In order to fully exploit its the degrees of freedom, the concept of Multi-dimensional IM (MIM) has been developed in literature, where Compressed Sensing (CS) is often utilized to exploit the sparsity of the multi-dimensional transmitted signals. However, this flexibility and performance gains are attained at the cost of a substantially increased detection complexity. In this paper, we propose Deep Learning (DL) based detection for CS-aided MIM (CS-MIM), where both Hard-Decision (HD) as well as Soft-Decision (SD) detection combined with iterative decoding are conceived. More explicitly, firstly, we propose learning aided hard and soft detection for CS-MIM. Secondly, two novel neural network aided methods are proposed for Iterative Soft Detection (ISD), where iterations are carried out between the CS-MIM detector and a channel decoder. In contrast to the conventional detection of CS-MIM system, which critically relies on the knowledge of Channel State Information (CSI) at the receiver, the proposed learning-aided methods are capable of eliminating the overhead and complexity of Channel Estimation (CE), which results in an improved transmission rate. Explicitly, we develop an advanced DL architecture for blind-detection-aided MIM for the first time in the open literature, where the HD and SD CS algorithms are implemented by learning without the need for CE. Our simulation results demonstrate that the proposed learning techniques conceived for SD CS-MIM combined with iterative detection are capable of achieving near-capacity performance at a reduced complexity compared to the conventional model-based SD relying on CSI acquisition.

Robust Downlink Multi-Antenna Beamforming With Heterogenous CSI: Enabling eMBB and URLLC Coexistence

Two of the main problems to achieve ultra-reliable low-latency communications (URLLC) are related to instantaneous channel state information (I-CSI) acquisition and the coexistence with other service modes such as enhanced mobile broadband (eMBB). The former comes from the non-negligible time required for accurate I-CSI acquisition, while the latter, from the heterogeneous and conflicting requirements of different nodes sharing the same network resources. In this paper, we leverage the I-CSI of multiple eMBB links and the channel measurement’s history of a URLLC user for multi-antenna beamforming design. Specifically, we propose a precoding design that minimizes the transmit power of a base station (BS) providing eMBB and URLLC services with signal-to-interference-plus-noise ratio (SINR) and outage constraints, respectively, by modifying existing I-CSI-based precoding schemes to account for URLLC channel history information. Moreover, we illustrate and validate the proposed method by adopting zero-forcing (ZF) and the transmit power minimization (TPM) precoding with SINR constraints. We show that the ZF implementation outperforms TPM in adverse channel conditions as in Rayleigh fading, while the situation is rapidly reversed as the channel experiences some line-of-sight (LOS). Finally, we determine the confidence levels at which the target outage probabilities are reached. For instance, we show that outage probabilities below 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-3</sup> are achievable with more than 99% confidence for both precoding schemes under favorable LOS conditions with 16 transmit antennas and 500 samples of URLLC channel history.

A Practical Channel Estimation Strategy for XL-MIMO Communication Systems

Extremely large-scale massive MIMO (XL-MIMO) has been emerged as an innovative technique for future 6G communication. Channel state information (CSI) acquisition is a crucial but challenging task in XL-MIMO wireless systems due to the larger number of base station (BS) antennas. In this letter, we investigate a practical strategy to realize efficient channel estimation for XL-MIMO communication systems with the consideration of hybrid-field channel model. Different from the existing work requiring the specific proportion of the number of far-field and near-field channel paths as a prior knowledge, which is not feasible in practical communications, our method aims to provide a criterion to determine the value of proportion first and then acquire the corresponding estimated channel components. Simulation results show the effectiveness and superiority of our proposed channel estimation method as compared to the benchmarks.

CSI acquisition in RIS-assisted mobile communication systems.

Reconfigurable intelligent surface- (RIS) assisted mobile communication is a promising technological paradigm thanks to the attractive advantages of low cost and flexible control of electromagnetic waves. However, the low-cost features of RISs entail some fundamental challenges to the acquisition of channel state information (CSI), which is essential for the optimal RIS design. To tackle this problem, there have been extensive studies on CSI acquisition in RIS-assisted mobile communication systems, from the perspective of architectural improvement as well as specific mathematical solutions. This article aims to overview the existing works on CSI acquisition in RIS-assisted mobile communication systems.

A Novel Mobility Induced Channel Prediction Mechanism for Vehicular Communications

The acquisition of channel state information (CSI) is a vital and challenging task in wireless communications, especially for high mobility scenarios with rapidly varying channels. Channel prediction, as an effective approach to acquire CSI, is considered a promising approach to improve the communication performance. However, most of the current prediction methods with the assumption of slowly varying channel components cannot cope with rapid variation. In this paper, we propose a novel channel prediction scheme to incorporate the mobility of both transceivers and scatterers. Based on the estimated mobility parameters, the component-wise channel extraction results are derived and then the channel frequency response is predicted. In addition, the prediction performance and the computational complexity of the proposed scheme are analyzed and evaluated, and the relationship between the mobility parameter estimation error and the channel component prediction accuracy is revealed as well. Through predicted results based on the simulated and measured data, the performance of the proposed scheme surpasses the conventional schemes with genie-aided information.

RIS-Aided mmWave MIMO Channel Estimation Using Deep Learning and Compressive Sensing

Reconfigurable intelligent surface (RIS) assisted wireless systems require accurate channel state information (CSI) to control wireless channels and improve both the bandwidth and energy efficiency. However, CSI acquisition is non-trivial for two reasons: 1) the passive nature of RIS does not allow transceiving and processing pilot signals, and 2) the dimensions of the cascaded channel between transceivers increases with the large number of RIS elements, which yields high training overhead and computational complexity. While prior art has mainly focused on frequency-flat channel estimation, this paper proposes novel data-driven and compressive sensing based approaches for estimating both frequency-flat and frequency-selective cascaded channels of RIS-assisted multi-user millimeter-wave large multiple input multiple output (MIMO) systems with limited training overhead. The proposed methods exploit the common sparsity property among the different subcarriers and the double-structured sparsity property of the angular cascaded channel matrices as different angular cascaded channels observed by different users share completely common non-zero rows and user-specific column supports. The proposed data-driven cascaded channel estimation approaches use denoising neural networks to accurately detect channel supports. Alternatively, when data-training capabilities are not available, the compressive sensing based orthogonal matching pursuit (OMP) approach relies on sparsity properties and applies simultaneous OMP to detect the channel supports. Simulation results show that the pilot overhead required by the proposed scheme is lower than existing schemes. When compared to other OMP approaches that achieve an NMSE gap of 5 to 6 dB with respect to the Oracle least square lower bound, the proposed algorithms reduce the lower bound gap to only 1 dB, while reducing complexity by more than two orders of magnitude.

Deep Learning-Based Rate-Splitting Multiple Access for Reconfigurable Intelligent Surface-Aided Tera-Hertz Massive MIMO

Reconfigurable intelligent surface (RIS) can significantly enhance the service coverage of Tera-Hertz massive multiple-input multiple-output (MIMO) communication systems. However, obtaining accurate high-dimensional channel state information (CSI) with limited pilot and feedback signaling overhead is challenging, severely degrading the performance of conventional spatial division multiple access. To improve the robustness against CSI imperfection, this paper proposes a deep learning (DL)-based rate-splitting multiple access (RSMA) scheme for RIS-aided Tera-Hertz multi-user MIMO systems. Specifically, we first propose a hybrid data-model driven DL-based RSMA precoding scheme, including the passive precoding at the RIS as well as the analog active precoding and the RSMA digital active precoding at the base station (BS). To realize the passive precoding at the RIS, we propose a Transformer-based data-driven RIS reflecting network (RRN). As for the analog active precoding at the BS, we propose a match-filter based analog precoding scheme considering that the BS and RIS adopt the LoS-MIMO antenna array architecture. As for the RSMA digital active precoding at the BS, we propose a low-complexity approximate weighted minimum mean square error (AWMMSE) digital precoding scheme, and further design a model-driven deep unfolding active precoding network (DFAPN) by combining the proposed AWMMSE scheme with DL. Then, to acquire accurate CSI at the BS for the investigated RSMA precoding scheme to achieve higher spectral efficiency, we propose a CSI acquisition network (CAN) with low pilot and feedback signaling overhead. The proposed DL-based RSMA scheme for RIS-aided Tera-Hertz multi-user MIMO systems can exploit the advantages of RSMA and DL to improve the robustness against CSI imperfection, thus achieving higher spectral efficiency with lower signaling overhead.