Acoustic-optic Modulator Research Articles

Laser induced fluorescence using frequency modulated light.

The small signal-to-noise ratio (SNR) of conventional laser induced fluorescence (LIF) measurements using a continuous wave laser, either diode or dye, is typically overcome by amplitude modulating the laser at a specific frequency and then using lock-in amplification to extract the signal from measurement noise. Here, we present LIF measurements of the neutral helium velocity distribution function in an rf plasma using frequency modulated (FM) laser injection. A pulse train of 100% amplitude modulation is generated synthetically with a random sequence of pulse lengths. The FM signal then drives an acoustic optic modulator placed in the path of the injection beam in an LIF measurement. The signal from a fast photomultiplier tube is digitized and cross-correlated with the known modulation signal. The resultant FM-based LIF signal outperforms a conventional lock-in-based LIF measurement on the same plasma in terms of SNR and precision.

Development of the upgraded single crystal dispersion interferometer (SCDI-U) and its first measurements of the line integrated electron densities in KSTAR during shattered pellet injections

Dispersion interferometers (DI) are widely used to measure line integrated electron densities in many fusion devices. A recent development of a heterodyne single crystal DI (SCDI) with a laser wavelength of 1064 nm (Lee et al 2021 Rev. Sci. Instrum. 92 033536) allows an easier and simpler optical setup by using only one, instead of two, nonlinear crystal. It is found that the reported heterodyne SCDI with an acoustic-optical modulator (AOM) has different beam paths between the frequency-shifted, via the AOM, fundamental and second harmonics which act as the reference beams. Such a separation of the reference beams inevitably produces non-removable phase shifts associated with mechanical vibrations, resulting in a reduction of the removing efficiency of the mechanical vibrations that DI systems can provide. By utilizing the fact that the diffraction angle due to the AOM is inversely proportional to the frequency of the laser beam and linearly proportional to an order of the frequency-shift, the SCDI-Upgrade (SCDI-U), which has complete overlap of the optical paths for both probing and reference beams from the laser source to the detectors, is proposed in this work. Its first measurements in KSTAR during shattered pellet injections are reported, and results obtained by the SCDI-U are compared with those from the existing two-color interferometer (TCI) in KSTAR. It is found that the SCDI-U measures the electron density more reliably during such an abrupt and large density change than the TCI does. Qualitative analyses on the effects of different injection schemes of the shattered pellets and possible application of the SCDI-U for ITER are also discussed.

Fading suppression in the Ф-OTDR system based on a phase-modulated optical frequency comb.

In this paper, what we believe to be a novel method is proposed to suppress the fading effect of the phase-sensitive optical time domain reflectometer (Ф-OTDR) by using a phase-modulated optical frequency comb. In the Ф-OTDR system, intensity distributions of Rayleigh backscattering (RBS) light are different for pulsed probe lights with different central frequencies, therefore the locations of the fading points corresponding to signals of different frequencies are differently distributed, allowing the use of frequency division multiplexing to suppress the fading effects. In the experimental system of this paper, a continuous light in the form of a frequency comb is firstly generated through phase modulation. It is then modulated into a pulsed probe light and injected into the sensing fiber to produce different RBS intensity distributions. Finally, the extracted phase is processed by using the amplitude evaluation method, so that the distorted phase can be eliminated. Fading suppression is achieved using our system, and the effect of suppression is evaluated. By using an equal-amplitude optical frequency comb containing seven frequency components, the fading probability density of the system is dramatically reduced from the range of 5.49%-9.83% to 0.08%. Compared with the conventional system using a single acoustic-optic modulator to generate the frequency shift, the method proposed in this paper features a larger modulation bandwidth and more flexible frequency combination scheme to better suppress the fading effect. This method does not sacrifice the response bandwidth of the system, and the phase delay can be precisely controlled, which helps to fully suppress the fading effect.

Electro-optic effects of lithium borate crystals studied by first-principles method

In respect to the electro-optic (EO) effect, LiB3O5 (LBO) and Li2B4O7 (LB4) contain the same elements but represent two extremes in the family of nonlinear optical (NLO) borate crystals: one with large second harmonic generation (SHG) coefficients but very small reported EO coefficients, the latter has extremely small SHG coefficients yet EO coefficients were found even larger than the practical EO modulator crystal β-BaB2O4 (BBO). The puzzle was unraveled through first-principles studies of the two crystals and it is found that the vibrational and electronic contributions to the EO effect were canceled in LBO and the major contributions are from piezoelectric induced effect for LB4 with electronic contributions negligible. In addition to the EO and NLO coefficients, dielectric, elastic, piezoelectric and elasto-optic constants are all obtained simultaneously. More importantly, fully determining the elastic, elasto-optic constants, all 4th rank tensors, can be adopted to calibrate the experimental uncertainties and help to design practical surface acoustic wave (SAW) or acoustic optic modulator (AOM) devices.

Coherent optical frequency transfer via 972-km fiber link

We demonstrate coherent optical frequency dissemination over a distance of 972 km by cascading two spans where the phase noise is passively compensated for. Instead of employing a phase discriminator and a phase locking loop in the conventional active phase control scheme, the passive phase noise cancellation is realized by feeding double-trip beat-note frequency to the driver of the acoustic optical modulator at the local site. This passive scheme exhibits fine robustness and reliability, making it suitable for long-distance and noisy fiber links. An optical regeneration station is used in the link for signal amplification and cascaded transmission. The phase noise cancellation and transfer instability of the 972-km link is investigated, and transfer instability of 1.1 × 10−19 at 104 s is achieved. This work provides a promising method for realizing optical frequency distribution over thousands of kilometers by using fiber links.

Development of the multi-chord CO2 interferometer on HFRC

A multi-chord interferometer system is established on the HUST Field Reversed Configuration (HFRC). Configured as a Mach-Zehnder heterodyne interferometer with seven probe chords distributed in the HFRC middle plane, the system is designed to estimate the integral density within the collisional-merging and compression region of the device. With a spatial resolution of 6 cm and a radial coverage range from -7 cm to 31 cm, it provides a density measurement range of 2 × 1018∼1 × 1021m−2. A 10.6 μm CO2 laser serves as the laser source, while an acoustic-optic modulator (AOM) generates a modulation frequency of 40 MHz corresponding to a temporal resolution of 25 ns. A laser interferometric reference chord and a fitting vibration compensation method are implemented to reduce frequency drift and vibration noise. Preliminary experimental results show that the phase resolution within 0.052rad has been achieved, which corresponds to a minimum measurable density of ∼2×1018m−2. Beyond the density profile measurements, the multi-chord interferometer system plays a pivotal role in observing instabilities of FRC plasmas.

Compensating three-dimensional field inhomogeneity in cold atom Efimov-state search by a time-averaged optical potential.

The Efimov effect and its universal property are of paramount importance in quantum few-body physics. Despite this, the predicted ground state Efimov resonance has not yet been observed in 39,40,41K-87Rb mixtures within the currently available observation window. Cooling atoms in the microgravity environment of outer space might overcome this limitation, whereas the residual curvature of the strong magnetic fields may result in significant atom leakage. In this work, we propose an optical method based on far-detuned time-averaged dipole potential to counteract the three-dimensional inhomogeneous field. The target intensity distribution can be conveniently obtained by modulating the central position of the quasi-1D print beam using acoustic optical modulators. Within a volume of 300 × 300 × 400µm3, the residual potential fluctuations can be reduced by two orders of magnitude to less than 100 pK. The proposed approach offers a realistic prospect of investigating the Efimov-type resonance in the 40K-87Rb Bose-Fermi mixture.

300 km ultralong fiber optic DAS system based on optimally designed bidirectional EDFA relays

Optical fiber distributed acoustic sensing (DAS) based on phase-sensitive optical time domain reflectometry (φ-OTDR) is in great demand in many long-distance application fields, such as railway and pipeline safety monitoring. However, the DAS measurement distance is limited by the transmission loss of optical fiber and ultralow backscattering power. In this paper, a DAS system based on multispan relay amplification is proposed, where the bidirectional erbium-doped fiber amplifier (EDFA) is designed as a relay module to amplify both the probe light and the backscattering light. In the theoretical noise model, the parameters of our system are carefully analyzed and optimized for a longer sensing distance, including the extinction ratio (ER), span number, span length, and gain of erbium-doped fiber amplifiers. The numerical simulation shows that a bidirectional EDFA relay DAS system can detect signals over 2500 km, as long as the span number is set to be more than 100. To verify the effectiveness of the scheme, a six-span coherent-detection-based DAS system with an optimal design was established, where the cascaded acoustic-optic modulators (AOMs) were used for a high ER of 104 dB. The results demonstrate that the signal at the far end of 300.2 km can be detected and recovered, achieving a high signal-to-noise ratio of 59.6 dB and a high strain resolution of 51.8pε/Hz at 50 Hz with a 20 m spatial resolution. This is, to the best of our knowledge, a superior DAS sensing distance with such a high strain resolution.

Controllable multi-stable-state operation in an AOM actively Q-switched all-fiber laser system.

This paper presents a comprehensive experimental study of multi-stable-state output characteristics in an all-fiber laser with an acoustic-optical modulator (AOM) as the Q-switcher. For the first time, in this structure, the partitioning of the pulsed output characteristics is explored, dividing the operating status of the laser system into four zones. The output characteristics, the application prospects, and the parameter setting rules for working in stable zones are presented. In the second stable zone, a peak power of 4.68 kW with 24 ns was obtained at 10 kHz. This is the narrowest pulse duration achieved with an AOM actively Q-switched all-fiber linear structure. The pulse narrowing is attributed to the rapid release of signal power and pulse tail truncated by AOM shutdown.

Development of 2.2 μm cavity ring-down spectrometer for tritiated water analysis

A rapid and simple tritium analysis method is required for tracer application and the quantitative evaluation of radioactive waste. In this study, we focused on cavity ring-down spectroscopy (CRDS), which is an ultra-sensitive laser absorption spectroscopy, and developed a spectrometer for tritium analysis. A current modulation-assisted acoustic optical modulator switching method was developed in the prototype setup containing a 2.2 μm diode laser for accessing the 2ν1 absorption band of tritiated water vapor. The benefit of this switching method was investigated using the Allan deviation and compared to conventional acoustic optical modulator-only and current-only switching methods. Using the prototype setup with the proposed switching method, CRDS of stable H2O vapor was demonstrated. The detection limit for liquid tritium water analysis was estimated to be 2 × 101 kBq/10 μl for ten-minute measurements.

Simultaneous Detection of Gas Concentration and Light Intensity Based on Dual-Quartz-Enhanced Photoacoustic-Photothermal Spectroscopy

This research proposes a method for the simultaneous acquisition of the second harmonic (2f) signal of quartz-enhanced photoacoustic spectroscopy (QEPAS) and the first harmonic (1f) signal of quartz-enhanced photothermal spectroscopy (QEPTS) based on the dual-quartz-enhanced photoacoustic–photothermal spectroscopy. The laser beam is first wavelength-modulated by the injection current and then intensity-modulated by an acoustic-optic modulator. The frequency of the wavelength modulation is half of the QTF1 resonant frequency, and the frequency of the intensity modulation is equal to the QTF2 resonant frequency. A modulated laser beam traveled through the two arms of the QTF1 and converged on the root of the QTF2. The 2f photoacoustic and 1f photothermal signals are concurrently obtained using the frequency division multiplexing technology and lock-in amplifiers, which allows the simultaneous detection of the gas concentration and laser light intensity. CH4 is chosen as the target gas, and the variations of the 2f photoacoustic and 1f photothermal signals are evaluated at various gas concentrations and light intensities. According to the experiments, the amplitude of the 1f photothermal signal has a good linear connection with light intensity (R2 = 0.998), which can be utilized to accurately revise the 2f photoacoustic signal while light intensity fluctuates. Over a wide range of concentrations, the normalized 2f photoacoustic signals exhibit an excellent linear response (R2 = 0.996). According to the Allan deviation analysis, the minimum detection limit for CH4 is 0.39 ppm when the integration time is 430 s. Compared with the light intensity correction using a photodetector for the QEPAS system, this approach offers a novel and effective light intensity correction method for concentration measurements employing 2f analysis. It also has the advantages of low cost and compact volume, especially for mid-infrared and terahertz systems.

Continuously and widely tunable frequency-stabilized laser based on an optical frequency comb.

Continuously and widely tunable lasers, actively stabilized on a frequency reference, are broadly employed in atomic, molecular, and optical (AMO) physics. The frequency-stabilized optical frequency comb (OFC) provides a novel optical frequency reference, with a broadband spectrum that meets the requirement of laser frequency stabilization. Therefore, we demonstrate a frequency-stabilized and precisely tunable laser system based on it. In this scheme, the laser frequency locked to the OFC is driven to jump over the ambiguity zones, which blocks the wide tuning of the locked laser, and tuned until the mode hopping happens with the always-activated feedback loop. Meanwhile, we compensate the gap of the frequency jump with a synchronized acoustic optical modulator to ensure the continuity. This scheme is applied to an external cavity diode laser (ECDL), and we achieve tuning at a rate of about 7 GHz/s, with some readily available commercial electronics. Furthermore, we tune the frequency-stabilized laser only with the feedback of diode current, and its average tuning speed can exceed 100 GHz/s. Due to the resource-efficient configuration and the simplicity of completion, this scheme can be referenced and can find wide applications in AMO experiments.

Controllable high-speed rotated femtosecond cylindrical vector beam based on optical heterodyne interference.

Structured light beams that possess unique polarization distribution could offer a new degree of freedom for a variety of applications, and hence its flexible polarization manipulation is necessary. Here we experimentally report a heterodyne interference-based method for generating femtosecond cylindrical vector beam (CVB) with high-speed controllable rotated polarization states. The femtosecond CVBs are created through the superposition of two optical vortices with opposite handedness. The use of two acoustic-optical modulators (AOMs) with frequency differences allows to achieve polarization rotation in a hopping-free scheme at on demand speed. Up to 1 MHz of the rotation frequency is demonstrated by visualizing the fast rotation events through a fast-frame-rate CCD camera. Moreover, we show our method can be readily extended to produce higher order CVBs with more complex rotated polarization distributions. Such a simple yet versatile femtosecond polarization-controlled laser system has the capability to act as a nonlinear trapping platform, thus opening tremendous potential opportunities in the fields of micromachining, nanofabrication, and so force.

Envelope Extraction for Vibration Locating in Coherent Φ-OTDR.

In a coherent phase-sensitive optical time-domain reflectometry (Φ-OTDR) sensing system, a frequency shift of hundreds of MHz generated by the pulse modulation of an acoustic optic modulator results in a high central frequency of a beating signal spectrum. In order to reduce the high-performance hardware requirement of signal acquisition, the coherent Φ-OTDR based on envelope extraction is proposed in this paper. Firstly, a theoretical model of a quasi-sinusoidal amplitude-modulated signal is built for the beating signal between local oscillator light and Rayleigh backward scattering light. An envelope detector is then utilized to realize the envelope extraction of beating signals with advantages of a simple structure and quick response. The extracted envelope can be directly used for vibration locating without the conventional orthogonal demodulation. Experiment results present that the sampling rate can be reduced to 10 MHz under the spatial resolution of 10 m and the sensing distance of 31 km. This scheme proves that envelope extraction is a reliable technical route for vibration locating, which can effectively reduce the sampling rate and simplify the data demodulation.

310 W picosecond laser based on Nd:YVO4 and Nd:YAG rod amplifiers

Herein, a high-power picosecond laser system based on master oscillator power amplifier structure is demonstrated. The seed source is a SESAM mode-locked fiber oscillator; the pulse repetition frequency is selected by an acoustic optical modulator with a tunable range from 100 kHz to 4.27 MHz. The amplification system includes one fiber amplifier stage, four stages of end-pumped Nd:YVO4 amplifiers, and two stages of side-pumped Nd:YAG amplifiers. Finally, the average output power of >300 W is achieved. The maximum peak power is 86.6 MW at 300 kHz with a pulse energy of ∼700 μJ and a pulse duration of ∼8.08 ps.

Heterodyne interferometric photothermal spectroscopy for gas detection in a hollow-core fiber

Photothermal spectroscopy with the optical pump-probe configuration has been used for sensitive gas detection in hollow-core fibers. In this study, we demonstrate a new method of heterodyne interferometric photothermal gas sensing with a simplified sensor design and enhanced sensor stability. As a proof-of-principle, we used an interband cascade pump laser at 3.6 μm for nitrous oxide (N2O) detection in a hollow-core anti-resonant fiber (HC-ARF). A Mach-Zehnder interferometer (MZI) with a 1.5 μm near-infrared probe laser was implemented to measure the photothermal-induced refractive index change inside the HC-ARF. The probe laser was split into two beams, one transmitted through the HC-ARF and one frequency-shifted by using an acoustic-optic modulator. Both beams were recombined to generate a beat note signal, which was then demodulated by two cascaded lock-in amplifiers to extract the photothermal signal. Based on the first harmonic detection of wavelength modulation, we achieved a normalized noise equivalent absorption (NNEA) coefficient of 7.7×10−9 cm-1WHz-1/2. Compared to conventional photothermal gas sensors with the MZI configuration, our new detection scheme eliminates the sophisticated opto-mechanical stabilization system and exhibits the intrinsic immunity to the power fluctuation of the probe laser.

A simple method to generate arbitrary laser shapes for stimulated Raman adiabatic passage.

Stimulated Raman adiabatic passage (STIRAP) is an effective technique to transfer state coherently with the features of both high fidelity and robustness in the field of quantum information and quantum precise measurement. In this note, we present a simple method to generate arbitrary laser shapes for STIRAP by controlling the modulation depth of the electro-optic modulator (EOM) and the diffraction efficiency of the acoustic-optic modulator (AOM) simultaneously. The EOM and AOM are used to control the power ratio between the two Raman lasers (pumping laser and Stokes laser) and the total power, respectively. Compared with the traditional method by combining two Raman lasers separated in space, this method has the advantage of simple structure and insensitivity to the environment disturbance, which would degrade the relative phase noise between two Raman lasers.

A Fading Tolerant Phase-Sensitive Optical Time Domain Reflectometry Based on Phasing-Locking Structure

The demand for phase-sensitive optical time domain reflectometry (φ-OTDR), which is capable of reconstructing external disturbance accurately, is increasing. However, φ-OTDR suffers from fading where Rayleigh backscattering traces (RBS) have low amplitude and may be lower than the noise floor. Therefore, signal-to-noise ratio (SNR) is reduced. In conventional coherent φ-OTDR, an acoustic optical modulator (AOM), which consists of an RF driving source and an acousto-optic crystal, is commonly used to generate optical pulses and frequency shifts. Since RF driving and external modulation signals come from an independent oscillation source, every intermediate frequency (IF) trace has a different phase bias. Therefore, it is difficult to average the IF signals directly for noise reduction. In this paper, a coherent φ-OTDR system based on phase-locking structure was proposed. This structure provided a clock homologous carrier signal, a modulation signal and a data acquisition (DAQ) trigger signal. Then, moving average methods were taken on IF signals before phase demodulating to reduce the overall noise floor of the system. This new φ-OTDR is more tolerant to fading, which can provide higher accuracy for vibration reconstruction. The frequency response range of vibration was as low as 1Hz, and a 25dB improvement of SNR was achieved.

Two-dimensional electronic spectroscopy with active phase Management

Two-dimensional electronic spectroscopy (2DES) is a powerful method to probe the coherent electron dynamics in complicated systems. Stabilizing the phase difference of the incident ultrashort pulses is the most challenging part for experimental demonstration of 2DES. Here, we present a tutorial review on the 2DES protocols based on active phase managements which are originally developed for quantum optics experiments. We introduce the 2DES techniques in box and pump-probe geometries with phase stabilization realized by interferometry, and outline the fully collinear 2DES approach with the frequency tagging by acoustic optical modulators and frequency combs. The combination of active phase managements, ultrashort pulses and other spectroscopic methods may open new opportunities to tackle essential challenges related to excited states.

A Robust Weld Seam Tracking Method by Using Intensity-Modulated Structured Light

The seam tracking method by using structured light is widely used in the automatic welding process. Most of the noise can be filtered out by a narrow-band optical filter whose center wavelength is the same as the structured light. However, it still suffers from light noise caused by sparks and fumes when the structured light is getting close to the welding pool. This limitation of the structured-light based method is inherent because light noise caused by the welding process has a wide spectrum and couldn't filter out by the optical filter. To circumvent this problem, we proposed a seam tracking method that can modulate the intensity of the structured light at a high frequency by an acoustic-optic modulator (AOM) and extract the modulated frequency from multiple seam images by Fourier transformation. As the frequency of noises such as sparks is random and different from the modulated frequency, the proposed method can remove these noises in the frequency domain directly. We demonstrated the robustness of this method by detecting seam in noisy welding conditions.