Acid Treatment Research Articles

Carbon nanotube incorporated quaternized lignin-based loose nanofiltration membrane toward dye/salt separation

Lignin is a promising raw material for membrane fabrication due to its abundant oxygen-containing functional groups, branched molecular structure, and high abundance in the botanic field. In this report, polydopamine (PDA) coated carbon nanotubes (PCNTs) are synthesized. Then, a PCNT-incorporated lignin-based loose nanofiltration membrane is fabricated using quaternized lignin (QL) as a raw material, triphosgene (TP) as a crosslinker, and PCNTs as nanoadditive by interfacial polymerization. The results show that the PCNTs uniformly distribute in the QL-based separation layer providing quick diffusion paths for water molecules and salt ions. The coated PDA layer improves the chemical compatibility between the PCNTs and the separation layer. The incorporated PCNTs optimize the membrane microstructure and elevate the pure water permeance to 45.5 LMH bar-1. The membrane exhibits high rejections to various dyes (> 90%) and high salt permeation (> 90%), demonstrating an excellent dye/salt separation performance. Moreover, it has satisfactory capabilities for resisting dye adsorption and fouling, and its separation capability also has good tolerances to the acid, alkali, and active chlorine treatments. The quaternary ammonium ions and hydrophilic surface endow the membrane with favorable bactericidal property (99.3%) and bacteria-adhesion resistance. Besides, TP is a better crosslinker than trimesoyl chloride for optimizing the membrane microstructure and crosslinking degree in terms of dye/salt separation.

Oral microbiota dysbiosis alters chronic restraint stress-induced depression-like behaviors by modulating host metabolism

Studies have shown that the microbiota-gut-brain axis is highly correlated with the pathogenesis of depression in humans. However, whether independent oral microbiome that do not depend on gut microbes could affect the progression of depression in human beings remains unclear, neither does the presence and underlying mechanisms of the microbiota-oral-brain axis in the development of the condition. Hence this study that encompasses clinical and animal experiments aims at investigating the correlation between oral microbiota and the onset of depression via mediating the microbiota-oral-brain axis. We compared the oral microbial compositions and metabolomes of 87 patients with depressive symptoms versus 70 healthy controls. We found that the oral microbial and metabolic signatures were significantly different between the two groups. Significantly, germ-free (GF) mice transplanted with saliva from mice exposing to chronic restraint stress (CRS) displayed depression-like behavior and oral microbial dysbiosis. This was characterized by a significant differential abundance of bacterial species, including the enrichment of Pseudomonas, Pasteurellaceae, and Muribacter, as well as the depletion of Streptococcus. Metabolomic analysis showed the alternation of metabolites in the plasma of CRS-exposed GF mice, especially Eicosapentaenoic Acid. Furthermore, oral and gut barrier dysfunction caused by CRS-induced oral microbiota dysbiosis may be associated with increased blood-brain barrier permeability. Pseudomonas aeruginosa supplementation exacerbated depression-like behavior, while Eicosapentaenoic Acid treatment conferred protection against depression-like states in mice. These results suggest that oral microbiome and metabolic function dysbiosis may be relevant to the pathogenesis and pathophysiology of depression. The proposed microbiota-oral-brain axis provides a new way and targets for us to study the pathogenesis of depression.

Response of Rhododendron simsii and Rhododendron delavayi Superoxide Dismutase Family Genes to High-Temperature Stress

Superoxide dismutases (SODs) are the first line of defense in the antioxidant defense system, and they play an essential role in various adversity stress adaptations in Rhododendron. In this study, 9 Rhododendron simsii SODs (RsSODs) and 11 Rhododendron delavayi SODs (RdSODs) genes were identified in the genomes of R. simsii and R. delavayi. Phylogenetic relationship analysis classified SOD proteins from two Rhododendron species and other related species into three subfamilies. The results of gene structure and conserved motif analysis show that SOD proteins are strongly evolutionarily conserved, and SODs of the same subfamily have similar motif distributions, positions, and lengths. Twenty-two light-responsive elements, eight phytohormone regulatory elements, five adversity stress-related elements, and three growth and development regulatory elements were detected in the RsSOD and RdSOD promoters. Quantitative real-time fluorescence polymerase chain reaction analysis showed that among the 20 candidate genes, except for RdCSD5, the other SODs were expressed in at least one of four tissues, and all of these gene family members had high expression levels in the leaves. We then investigated the response of the RsSOD and RdSOD gene families to high-temperature stress in combination with the following specific stressors: abscisic acid, ethephon, and hydrogen peroxide treatments, followed by high-temperature stress. Different degrees of upregulated expression of the detected SOD gene family members were found for exogenous reagent treatments and different times of high-temperature stress. Thus, we provide a basis for the further functional characterization of SOD genes in R. simsii and R. delavayi in the future.

Novel approaches to improve rooting of microshoots, acclimatization and plant growth of Pyrodwarf pear rootstock

Ex vitro root formation of micro cuttings of Pyrodwarf pear rootstock (Pyrus communis L.) using floating perlite bed and the effects of Indole-3-butric acid (IBA) treatments on the growth performance after five months were determined. Micro cuttings were dipped in 25, 50, 100 or 150 mg L–1 IBA solutions for 10 s for ex vitro rooting, except for the control. The floating perlite bed cultures were kept for 4 weeks at 25 ± 2ºC with a photoperiod of 16 h light (35 μmol∙m−2∙s−1). At the end of the rooting experiment, there were no statistically significant differences among treatments in terms of rooting percentages (77.8%-81.1%), number of roots (1.9–2.5) and the length of the longest root (22.8–36.8 mm). In the plant growth experiment, ex vitro rooted micro cuttings treated with 25 and 50 mg L–1 IBA and the control were maintained under greenhouse conditions for 5 months to determine the growth performance of the plants. Growth performance was higher in terms of stem diameter, root and stem dry weights of plants rooted with 50 mg L–1 IBA determined as 4.5 mm, 196.5 mg and 704.7 mg, respectively. In conclusion, it was found that the floating perlite bed method was effective in ex vitro rooting and acclimatization. Ex vitro rooting with 50 mg L−1 IBA improved plant growth performance in greenhouse.

Alternative Routes for Tranexamic Acid Treatment in Obstetric Bleeding (WOMAN-PharmacoTXA Trial): A Randomized Trial and Pharmacological Study in Cesarean Section Births

Alternative Routes for Tranexamic Acid Treatment in Obstetric Bleeding (WOMAN-PharmacoTXA Trial): A Randomized Trial and Pharmacological Study in Cesarean Section Births

Exploratory studies on the use of peanut shell biochar as a promising adsorbent for ivermectin removal from aqueous solutions: impact of biomass treatment, pyrolisis temperature and duration

The contamination of environmental matrices by chemical compounds poses a significant challenge for humanity, demanding focused attention from researchers and governments. Within aquatic environments, the emerging contaminants with potential ecotoxicological effects, even at low concentrations, have earned global interest among researchers. The persistence of these contaminants is exacerbated by specific physicochemical characteristics, hindering their natural degradation and removal through conventional water treatment methods. Biochar, a carbonaceous material produced through biomass pyrolysis at high temperatures, exhibits properties that effectively remove emerging contaminants from water. In this study, we investigated the impact of acidic biomass treatment on the removal efficiency of ivermectin from aqueous solutions. The materials were derived from untreated biomass, as well as basic and acidic-treated peanut shell (PS), subjected to pyrolysis at temperatures of 300, 400, 500, and 600 °C for 2, 3, and 4 hours. Characterization was conducted using TGA, ATR-FT-IR, SEM-EDS, and XRD. Quantification of ivermectin removal was performed using HPLC-DAD. The results showed that the removal was enhanced by temperature and time of pyrolysis, while the chemical treatments had different effects. The most effective removal tendency was observed with acidic biochar calcinated at 600 °C, demonstrating an average removal yield of 84.70%.

#1474 COVID-19-infection in kidney transplant recipients during the omicron surge, a sigh of relief

Abstract Background and Aims The COVID-19 pandemic had a profound impact on global health, particularly affecting high-risk individuals such as solid organ transplant recipients (SOTRs). SOTRs have an elevated risk of severe COVID-19 disease and increased mortality. Kidney transplant recipients (KTRs) vaccinated with mRNA-based vaccines exhibit a lower response rate and shorter half-time of the serologic conversion. However, the percentage of serologic response improves with increasing number of vaccine doses. Studies also indicate that KTRs with prior COVID-19 infection demonstrate a more robust immune response post-immunization compared to COVID-19 naïve patients. Factors such as age, immunosuppressive regimen, eGFR, time since transplantation also impact vaccination response. This study aims to investigate COVID-19 infection outcome and vaccination response among KTRs during the Omicron surge. Method This study is a retrospective single-center cohort study at the Department of Nephrology and Transplantation at Skåne University Hospital in Malmö, Sweden. KTRs infected with COVID-19 during the Omicron surge were included (January 2022 until August 2023). Results 97 KTRs diagnosed with COVID-19 were included of whom 91 were vaccinated. In average, three doses of COVID-19-vaccine had been given to the patients. 67 KTRs showed seroconversion, 28 remained seronegative and the status of the remaining 2 KTRs was unknown. There was a significant association between lack of antibody production and mycophenolic acid (MPA) treatment (P = 0.019, Chi2 test), however the significance was not retained in a multivariate logistic regression analysis. Among the seroconverted (n = 67), 61 experienced mild infection, 5 moderate infection and 1 severe infection, according to the WHO clinical progression scale. In the seronegative group (n = 28), 25 had mild infection while the remaining three had moderate infection. The median time for viral clearance was examined in 79 KTRs and was 23 days (IQR 18-31). Immunosuppression was adjusted in 34% (n = 33) of cases. 2.1% (n = 2) of KTRs experienced graft rejection post infection. Conclusion While most patients experienced a mild infection, unlike during the first surges of the pandemic, the observed subsequent graft rejections emphasize the complexity of COVID-19´s potentially immunologic triggering effect and risk of graft loss in KTRs. The correlation between MPA treatment and a lower degree of serologic conversion after vaccination underscores the need for personalized immunologic follow up and treatment regimen in KTRs.

Zinc oxide nanoparticles encapsulated in alginate beads: a promising and recyclable adsorbent for simultaneous uptake of toxic metals.

Heavy metal toxicity is a known problem and various methods are used for treatment. Adsorption has some advantages and it would be promising if environmentally friendly and cheap materials were utilized. Alginate and zinc oxide nanoparticles were selected and composite alginate beads were used for the removal of mixed metals from aqueous solutions. Batch and column experiments were conducted to determine some parameters' effects and the adsorbent's real application potential. According to the batch experiments, zinc oxide nanoparticles to alginate ratio of 0.5 g/g, and pH levels nearby to the neutral range led to better metal removals. 0.5 ml/min of flow rate supplied better metal removal efficiencies in columns, with the highest treatment as 86% of Pb2+. Acid treatment can be successfully applied for the regeneration of the adsorbent, at least three times only with a 4% reduction in the adsorption efficiency. Heavy metal uptake was compatible with the Pseudo 2nd order model indicating chemisorption as a dominant mechanism. Also, the intraparticle diffusion model illustrated adsorption might govern more than one step. The Langmuir model had the best fit and suggested monolayer covering for Pb2+, 76.3 mg/g. Alginate-based nanocomposite beads were useful for mixed metal removal and could be used.&#xD.

Ascorbic Acid and Citric Acid Treatments Increase the Shelf Life of Fresh-Cut Potato: Cultivar Effect

Ascorbic Acid and Citric Acid Treatments Increase the Shelf Life of Fresh-Cut Potato: Cultivar Effect

Characteristic features and prognostic factors in gastric cancer patients with bone metastases: multicenter experience

We evaluated the incidence, clinicopathological features, prognostic factors, progression-free survival (PFS) and overall survival (OS) of patients with gastric cancer and bone metastases. The medical records of 110 patients with bone metastases were retrospectively analyzed. In our study, the incidence of bone metastases was 3.2%. The median patient age was 60 years. A total of 68 (61.8%) patients exhibited synchronous metastases, and 42 (38.2%) patients developed metachronous metastases. Alkaline phosphatase (ALP) levels were high in 54 (49%) patients. At the median follow-up time of 9.8 months, median PFS and OS times were 4.7 and 6.3 months, respectively. The median interval from the diagnosis to bone metastases was 9.3 months. Univariate analysis showed that Eastern Cooperative Oncology Group Performance Status (ECOG PS) ≥2, stage at diagnosis, time of metastases, number of metastases, presence of extraskeletal metastases, use of zoledronic acid treatment, palliative chemotherapy post-bone metastases and radiotherapy to bone metastases were significant prognostic indicators for PFS. Additionally, ECOG PS ≥2, stage at diagnosis, time of metastases, number of metastases, presence of extraskeletal metastases, zoledronic acid treatment, palliative chemotherapy post-bone metastases, and radiotherapy to bone metastases significantly influenced OS. Moreover, in multivariate analysis, ECOG PS, time of metastases, presence of extra-bone metastases, and the use of palliative chemotherapy after bone metastases were found to be independent prognostic factors for PFS. Moreover, ECOG PS, time of metastases, and use of palliative chemotherapy after bone metastases were significantly independent prognostic indicators for OS. Our findings show that the presence of synchronous metastases, use of palliative chemotherapy, use of zoledronic acid after bone metastases, and ALP level within the normal range were significantly associated with prolonged OS in gastric cancer patients with bone metastases.

Oral Administration Properties Evaluation of Three Milk-derived Extracellular Vesicles Based on Ultracentrifugation Extraction Methods.

Milk-derived extracellular vesicles (M-EVs) are low-cost, can be prepared in large quantities, and can cross the gastrointestinal barrier for oral administration. However, the composition of milk is complex, and M-EVs obtained by different extraction methods may affect their oral delivery. Based on this, we propose a new method for extracting M-EVs based on cryogenic freezing treatment (Cryo-M-EVs) and compare this method with the previously reported acetic acid treatment (Acid-M-EVs) method and the conventional ultracentrifugation method (Ulltr-M-EVs). The new method simplifies the pretreatment step and achieves 25-fold and 2-fold higher yields than Acid-M-EVs and Ulltr-M-EVs. And it was interesting to note that Cryo-M-EVs and Acid-M-EVs had higher cellular uptake efficiency, and Cryo-M-EVs presented the best transepithelial transport effect. After oral administration of the three M-EVs extracted by three methods in mice, Cryo-M-EVs effectively successfully crossed the gastrointestinal barrier and achieved hepatic accumulation, whereas Acid-M-EVs and Ultr-M-EVs mostly resided in the intestine. The M-EVs obtained by the three extraction methods showed a favorable safety profile at the cellular as well as animal level. Therefore, when M-EVs obtained by different extraction methods are used for oral drug delivery, we can utilize their accumulation properties at different sites to better deal with different diseases. This article is protected by copyright. All rights reserved.

Screening of Germplasm and Construction of Evaluation System for Autotoxicity Tolerance during Seed Germination in Cucumber

Due to the widespread use of intensive cropping patterns, the problem of continuous cropping obstacle, which is dominated by autotoxicity, has been becoming more and more prominent. Although many methods have been proposed to overcome the continuous cropping obstacle of cucumber, no study has reported the screening and evaluation of cucumber germplasm resistant to autotoxicity. In this study, 28 physiological indices related to the cucumber bud stage under cinnamic acid (CA) treatment were determined. In total, 45 cucumber cultivars were classified into three groups using principal component analysis and cluster analysis, and a model for evaluating cucumber resistance to autotoxicity was developed. The evaluation model was validated using autotoxicity-tolerant and non-autotoxicity-tolerant cultivars. The results showed that the growth of non-autotoxicity-tolerant cultivars was significantly inhibited compared to autotoxicity-tolerant cultivars. This indicated that the evaluation model of cucumber autotoxicity tolerance is reliable. The results of this study provide a valuable reference for the application of cucumber autotoxicity-tolerant germplasm resources and the development of autotoxicity-tolerant genes.

Effect of Recycled Concrete Aggregate Addition on the Asphalt Mixtures Performance: ITZ Area, Microstructure, and Chemical Analysis Perspectives

The importance of environmental consciousness and sustainability is increasing among transportation governing bodies worldwide. Many government bodies are concerned with maximizing the usage of recycled substances in road construction. Therefore, assessing the effect of recycled materials consumption is essential, mainly when designing new ‘green’ pavement types. The primary objective of this study is to investigate the impact of different treatments on improving the interfacial transition zone (ITZ) of coarse recycled concrete aggregate (CRCA) and its application in asphalt mixes. Such an aim is accomplished by enhancing its physical and mechanical characteristics, as well as its microstructure. The surface morphology, chemical composition, and intermix phases of the ITZ area and calcium silicate hydrate (CSH) compounds for CRCA were evaluated using scanning electron microscopy (SEM), an energy-dispersive X-ray analyzer (EDAX), and X-ray diffraction analysis (XRD). The performance of asphalt mixtures that included treated and untreated CRCA was also examined using different tests. It was found that heat treatment is an effective technique for enhancing the ITZ. However, cracks were seen in the mortar of CRCA when exposed to high temperatures (500 °C), which adversely affects the characteristics of the mortar. Acid treatment appeared to be an effective approach for improving the ITZ area. Nevertheless, the treatment that used acetic acid, a weak acid, was more effective than HCl acid, a strong acid. The outcomes revealed that the ITZ microstructure is significantly enhanced under different treatment types; however, microstructure improvements mainly included increased surface homogeneity and CSH compounds and a reduced Ca/Si ratio. It was also found that the asphalt mixtures with different proportions of untreated CRCA exhibited enhanced resistance to rutting. Furthermore, their tensile strength ratio (TSR) values were above the minimal level requirements. Moreover, the asphalt mixture with 30% CRCA, which was treated with various treatment methods, demonstrated a significant improvement in the mixtures’ mechanical properties; therefore, its application is highly successful and an environmentally friendly solution.

Lutein and Zeaxanthin Enhance, Whereas Oxidation, Fructosylation, and Low pH Damage High-Density Lipoprotein Biological Functionality.

High-density lipoproteins (HDLs) are key regulators of cellular cholesterol homeostasis but are functionally altered in many chronic diseases. The factors that cause HDL functional loss in chronic disease are not fully understood. It is also unknown what roles antioxidant carotenoids play in protecting HDL against functional loss. The aim of this study was to measure how various disease-associated chemical factors including exposure to (1) Cu2+ ions, (2) hypochlorous acid (HOCL), (3) hydrogen peroxide (H2O2), (4) sialidase, (5) glycosidase, (6) high glucose, (7) high fructose, and (8) acidic pH, and the carotenoid antioxidants (9) lutein and (10) zeaxanthin affect HDL functionality. We hypothesized that some of the modifications would have stronger impacts on HDL particle structure and function than others and that lutein and zeaxanthin would improve HDL function. HDL samples were isolated from generally healthy human plasma and incubated with the corresponding treatments listed above. Cholesterol efflux capacity (CEC), lecithin-cholesterol acyl transferase (LCAT) activity, and paraoxonase-1 (PON1) activity were measured in order to determine changes in HDL functionality. Median HDL particle diameter was increased by acidic pH treatment and reduced by HOCl, high glucose, high fructose, N-glycosidase, and lutein treatments. Acidic pH, oxidation, and fructosylation all reduced HDL CEC, whereas lutein, zeaxanthin, and sialidase treatment improved HDL CEC. LCAT activity was reduced by acidic pH, oxidation, high fructose treatments, and lutein. PON1 activity was reduced by sialidase, glycosidase, H2O2, and fructose and improved by zeaxanthin and lutein treatment. These results show that exposure to oxidizing agents, high fructose, and low pH directly impairs HDL functionality related to cholesterol efflux and particle maturation, whereas deglycosylation impairs HDL antioxidant capacity. On the other hand, the antioxidants lutein and zeaxanthin improve or preserve both HDL cholesterol efflux and antioxidant activity but have no effect on particle maturation.

Effect of organic acids on fermentation quality and microbiota of horseshoe residue and corn protein powder

This experiment aimed to investigate the impact of malic acid (MA) and citric acid (CA) on the nutritional composition, fermentation quality, rumen degradation rate, and microbial diversity of a mixture of apple pomace and corn protein powder during ensiling. The experiment used apple pomace and corn protein powder as raw materials, with four groups: control group (CON), malic acid treatment group (MA, 10 g/kg), citric acid treatment group (CA, 10 g/kg), and citric acid + malic acid treatment group (MA, 10 g/kg + CA, 10 g/kg). Each group has 3 replicates, with 2 repetitions in parallel, subjected to mixed ensiling for 60 days. The results indicated: (1) Compared to the CON group, the crude protein content significantly increased in the MA, CA, and MA + CA groups (p < 0.05), with the highest content observed in the MA + CA group. The addition of MA and CA effectively reduced the water-soluble carbohydrate (WSC) content (p < 0.05). Simultaneously, the CA group showed a decreasing trend in NDFom and hemicellulose content (p = 0.08; p = 0.09). (2) Compared to the CON group, the pH significantly decreased in the MA, CA, and MA + CA groups (p < 0.01), and the three treatment groups exhibited a significant increase in lactic acid and acetic acid content (p < 0.01). The quantity of lactic acid bacteria increased significantly (p < 0.01), with the MA + CA group showing a more significant increase than the MA and CA groups (p < 0.05). (3) Compared to the CON group, the in situ dry matter disappearance (ISDMD) significantly increased in the MA, CA, and MA + CA groups (p < 0.05). All three treatment groups showed highly significant differences in in situ crude protein disappearance (ISCPD) compared to the CON group (p < 0.01). (4) Good’s Coverage for all experimental groups was greater than 0.99, meeting the conditions for subsequent sequencing. Compared to the CON group, the Shannon index significantly increased in the CA group (p < 0.01), and the Simpson index increased significantly in the MA group (p < 0.05). However, there was no significant difference in the Chao index among the three treatment groups and the CON group (p > 0.05). At the genus level, the abundance of Lentilactobacillus in the MA, CA, and MA + CA groups was significantly higher than in the control group (p < 0.05). PICRUSt prediction results indicated that the metabolic functional microbial groups in the CA and MA treatment groups were significantly higher than in the CON group (p < 0.05), suggesting that the addition of MA or CA could reduce the loss of nutritional components such as protein and carbohydrates in mixed ensilage. In conclusion, the addition of malic acid and citric acid to a mixture of apple pomace and corn protein powder during ensiling reduces nutritional losses, improves fermentation quality and rumen degradation rate, enhances the diversity of the microbial community in ensiled feed, and improves microbial structure. The combined addition of malic acid and citric acid demonstrates a superior effect.

Effect of sandblasting and acid surface pretreatment on the specific capacitance of CuO nanostructures grown by hot water treatment for supercapacitor electrode applications.

Crystalline copper oxide (CuO) nanostructures with micro, nano, and micro-nano surface roughness were grown on Cu sheet substrates by a facile, scalable, low-cost, and low-temperature hot water treatment (HWT) method that simply involved immersing Cu sheet in DI water at 75 °C for 24 hours without any chemical additives. Various morphological features and sizes of CuO nanostructures were tuned by using different surface pretreatment techniques including acid treatment, sandblasting, or a combination of those two. The surface morphology of the prepared samples was analyzed by scanning electron microscopy (SEM). The crystal structure of the CuO nanostructures was investigated by X-ray diffraction (XRD) and Raman spectroscopy. To study the pseudocapacitive behavior, their potential supercapacitor performance, and equivalent series resistance, electrochemical analysis was done by cyclic voltammetry (CV) and electrochemical impedance spectroscopy for all the CuO/Cu samples in 1 M of Na2SO4 electrolyte. Among all, the best supercapacitive performance was achieved for CuO/Cu samples pretreated with Sandblasting followed by Acid treatment resulting in a specific capacitance of about 104 F/g. The electrode with the Sandblasted + Acid pretreated sample showed a maximum of ~ 69% capacitive retention after 2000 consecutive cycles. Our results indicate that CuO nanostructures on Cu substrates prepared with different surface pretreatment conditions and grown by HWT can be promising electrodes for supercapacitor device applications.

Production of Porous Biochar from Cowdung and its Application

Porous activated carbon (PAC) powder is prepared from solid bio-waste - cow dung samples (CD). UV- Spectroscopy confirms the absorption rate of activated porous biochar at different concentration solutions(in ppm).The activation process is carried out by phosphoric acid and sodium hydroxide treatment followed by calcination at different temperature condition. XRD pattern confirms the amorphous phase formation with graphitic nature for different precursor utilization. SEM analysis shows the uniform and hierarchical porous network formation and aggregated particle with tiny. X- ray analysis confirms the formation of graphitic carbon and porous morphology for sample activated at increased calcination temperature. The elemental composition of as prepared carbon samples is determined by SEM and confirms the formation major carbon content existence. The obtained product is observed for the dye removal process wherein the specific amount of PAC is added to the Methylene Blue(MB) dye solutions and the absorption rate is observed through uv-spectroscopy.

Formation of metastable phases during spark plasma sintering of Fe@Au core–shell particles

ABSTRACT The present work reports the formation of Fe-Au metastable alloys by galvanic replacement, pressureless spark plasma sintering (SPS) and acid treatment. The reaction of partial galvanic replacement between micrometer-sized iron particles and HAuCl4 solution allowed synthesising core–shell Fe@Au particles. When the Fe@Au particles were treated in HCl solution, iron was selectively dissolved and hollow Au particles were formed. Pressureless SPS of the Fe@Au core–shell particles led to the formation of a metastable intermetallic phase, FeAu3, and a supersaturated solid solution, Au(Fe). The latter was resistant to HCl solution; at the same time, the FeAu3 phase decomposed during HCl treatment to form a porous gold structure. This work shows that a combination of galvanic replacement, SPS and acid treatment can be used for the preparation of metastable Fe-Au alloys with different phase compositions and particle morphologies.

Removal and Reoccurrence of LLZTO Surface Contaminants under Glovebox Conditions.

The reactivity of Li6.4La3Zr1.4Ta0.6O12 (LLZTO) solid electrolytes to form lithio-phobic species such as Li2CO3 on their surface when exposed to trace amounts of H2O and CO2 limits the progress of LLZTO-based solid-state batteries. Various treatments, such as annealing LLZTO within a glovebox or acid etching, aim at removing the surface contaminants, but a comprehensive understanding of the evolving LLZTO surface chemistry during and after these treatments is lacking. Here, glovebox-like H2O and CO2 conditions were recreated in a near ambient pressure X-ray photoelectron spectroscopy chamber to analyze the LLZTO surface under realistic conditions. We find that annealing LLZTO at 600 °C in this atmosphere effectively removes the surface contaminants, but a significant level of contamination reappears upon cooling down. In contrast, HCl(aq) acid etching demonstrates superior Li2CO3 removal and stable surface chemistry post treatment. To avoid air exposure during the acid treatment, an anhydrous HCl solution in diethyl ether was used directly within the glovebox. This novel acid etching strategy delivers the lowest lithium/LLZTO interfacial resistance and the highest critical current density.

Development of a novel laboratory photodynamic therapy device: automated multi-mode LED system for optimum well-plate irradiation

HighlightsMulti-mode Automated Well-plate PDT LED Laboratory Irradiation System described.Automates and standardizes time-consuming experiments.LED wavelength and temperature stabilized for highly reproducible irradiations.Efficacy demonstrated in 5-aminolevulinic acid (5-ALA) treatments of HT-29 colon cancer cells and WI-38 human lung fibroblasts.