Acid-tolerant Strain Research Articles

Engineering quorum sensing-based genetic circuits enhances growth and productivity robustness of industrial E. coli at low pH

BackgroundMicrobial organisms hold significant potential for converting renewable substrates into valuable chemicals. Low pH fermentation in industrial settings offers key advantages, including reduced neutralizer usage and decreased wastewater generation, particularly in the production of amino acids and organic acids. Engineering acid-tolerant strains represents a viable strategy to enhance productivity in acidic environments. Synthetic biology provides dynamic regulatory tools, such as gene circuits, facilitating precise expression of acid resistance (AR) modules in a just-in-time and just-enough manner.ResultsIn this study, we aimed to enhance the robustness and productivity of Escherichia coli, a workhorse for amino acid and organic acid production, in industrial fermentation under mild acidic conditions. We employed an Esa-type quorum sensing circuit to dynamically regulate the expression of an AR module (DsrA-Hfq) in a just-in-time and just-enough manner. Through careful engineering of the critical promoter PesaS and stepwise evaluation, we developed an optimal Esa-PBD(L) circuit that conferred upon an industrial E. coli strain SCEcL3 comparable lysine productivity and enhanced yield at pH 5.5 compared to the parent strain at pH 6.8.ConclusionsThis study exemplifies the practical application of gene circuits in industrial environments, which present challenges far beyond those of well-controlled laboratory conditions.

Characterization of Mild Acid Stress Response in an Engineered Acid-Tolerant Escherichia coli Strain.

Engineering acid-tolerant microbial strains is a cost-effective approach to overcoming acid stress during industrial fermentation. We previously constructed an acid-tolerant strain (Escherichia coli SC3124) with enhanced growth robustness and productivity under mildly acidic conditions by fine-tuning the expression of synthetic acid-tolerance module genes consisting of a proton-consuming acid resistance system (gadE), a periplasmic chaperone (hdeB), and ROS scavengers (sodB, katE). However, the precise acid-tolerance mechanism of E. coli SC3124 remained unclear. In this study, the growth of E. coli SC3124 under mild acid stress (pH 6.0) was determined. The final OD600 of E. coli SC3124 at pH 6.0 was 131% and 124% of that of the parent E. coli MG1655 at pH 6.8 and pH 6.0, respectively. Transcriptome analysis revealed the significant upregulation of the genes involved in oxidative phosphorylation, the tricarboxylic acid (TCA) cycle, and lysine-dependent acid-resistance system in E. coli SC3124 at pH 6.0. Subsequently, a weighted gene coexpression network analysis was performed to systematically determine the metabolic perturbations of E. coli SC3124 with mild acid treatment, and we extracted the gene modules highly associated with different acid traits. The results showed two biologically significant coexpression modules, and 263 hub genes were identified. Specifically, the genes involved in ATP-binding cassette (ABC) transporters, oxidative phosphorylation, the TCA cycle, amino acid metabolism, and purine metabolism were highly positively associated with mild acid stress responses. We propose that the overexpression of synthetic acid-tolerance genes leads to metabolic changes that confer mild acid stress resistance in E. coli. Integrated omics platforms provide valuable information for understanding the regulatory mechanisms of mild acid tolerance in E. coli and highlight the important roles of oxidative phosphorylation and ABC transporters in mild acid stress regulation. These findings offer novel insights to better the design of acid-tolerant chasses to synthesize value-added chemicals in a green and sustainable manner.

High acidity organic waste degradation and the potential to bioremediation of heavy metals in soil by an acid-tolerant Serratia sp.

Highly acidic citrus pomace (CP) is a byproduct of Pericarpium Citri Reticulatae production and causes significant environmental damage. In this study, a newly isolated acid-tolerant strain of Serratia sp. JS-043 was used to treat CP and evaluate the effect of reduced acid citrus pomace (RACP) in passivating heavy metals. The results showed that biological treatment could remove 97.56% of citric acid in CP, the organic matter in the soil increased by 202.60% and the catalase activity in the soil increased from 0 to 0.117Ug-1. Adding RACP into soil can increase the stabilization of Cu, Zn, As, Co, and Pb. Specifically, through the metabolism of strain JS-043, RACP was also involved in the stabilization of Zn and Pb, and Residual Fraction in the total pool of these metals increased by 10.73% and 10.54%, respectively. Finally, the genome sequence of Serratia sp. JS-043 was completed, and the genetic basis of its acid-resistant and acid-reducing characteristics was preliminarily revealed. JS-043 also contains many genes encoding proteins associated with heavy metal ion tolerance and transport. These findings suggest that JS-043 may be a high-potential strain to improve the quality of acidic organic wastes that can then be useful for soil bioremediation.

Evolution-aided improvement of the acid tolerance of Levilactobacillus brevis and its application in sourdough fermentation

Levilactobacillus brevis is crucial in food fermentation, particularly in sourdough production. However, the cultivation of L. brevis faces a challenge with accumulation of lactic acid, a major inhibitor. We aimed to increase the acid tolerance of L. brevis, an industrial strain for sourdough fermentation. We used the adaptive laboratory evolution (ALE) to obtain lactic acid tolerant strains. The evolved strain’s fermentation and metabolite profiles, alongside sensory evaluation, were compared with the parental strain by using various analytical techniques. The ALE approach increased lactic acid tolerance in the evolved strain showing an increased growth rate by 1.1 and 1.9 times higher than the parental strain at pH 4.1 and 6.5, respectively. Comprehensive analyses demonstrated its potential application in sourdough fermentation, promising reduced downstream costs. The evolved strain, free from genetically modified organisms concerns, has great potential for industrial use by exhibiting enhanced growth in acidic conditions without affecting consumers’ bread preferences.

Development of an Haa1-Based Biosensor for Acetic Acid Sensing in Saccharomyces cerevisiae.

Transcription factor (TF)-based biosensors are important tools in strain development and screening as they can allow accurate monitoring of intracellular concentrations of a molecule. Acetic acid is one of the main inhibitors in lignocellulosic biomass and a major challenge when using yeast cell factories for biorefinery applications. Thus, developing acetic acid tolerant strains is of great importance. The acetic acid sensing biosensor developed relies on the endogenous Saccharomyces cerevisiae TF Haa1 that upon binding of acetic acid translocates to the nucleus. The acetic acid biosensor can be used as a tool for strain development and evaluation, as well as for screening of acetic acid-producing strains and for dynamic monitoring of acetic acid accumulation. This chapter describes a methodology for developing a TF-based biosensor for acetic acid sensing. Protocols for design considerations, part construction, and characterization procedures are included. The approach can potentially be adapted to any molecule where a suitable TF can be identified.

Exploring Peracetic Acid and Acidic pH Tolerance of Antibiotic-Resistant Non-Typhoidal Salmonella and Enterococcus faecium from Diverse Epidemiological and Genetic Backgrounds.

Acid stress poses a common challenge for bacteria in diverse environments by the presence of inorganic (e.g., mammals' stomach) or organic acids (e.g., feed additives; acid-based disinfectants). Limited knowledge exists regarding acid-tolerant strains of specific serotypes, clonal lineages, or sources in human/animal pathogens: namely, non-typhoidal Salmonella enterica (NTS) and Enterococcus faecium (Efm). This study evaluated the acidic pH (Mueller-Hinton acidified with HCl) and peracetic acid (PAA) susceptibility of Efm (n = 72) and NTS (n = 60) from diverse epidemiological/genetic backgrounds and with multiple antibiotic resistance profiles. Efm minimum growth/survival pH was 4.5-5.0/3.0-4.0, and for NTS it was 4.0-4.5/3.5-4.0. Efm distribution among acidic pH values showed that only isolates of clade-non-A1 (non-hospital associated) or the food chain were more tolerant to acidic pH compared to clade-A1 (hospital-associated clones) or clinical isolates (p < 0.05). In the case of NTS, multidrug-resistant (MDR) isolates survived better in acidic pH (p < 0.05). The PAA MIC/MBC for Efm was 70-120/80-150 mg/L, and for NTS, it was 50-70/60-100 mg/L. The distribution of Efm among PAA concentrations showed that clade-A1 or MDR strains exhibited higher tolerance than clade-non-A1 or non-MDR ones (p < 0.05). NTS distribution also showed higher tolerance to PAA among non-MDR and clinical isolates than food chain ones (p < 0.05) but there were no differences among different serogroups. This unique study identifies specific NTS or Efm populations more tolerant to acidic pH or PAA, emphasizing the need for further research to tailor controlled measures of public health and food safety within a One Health framework.

Analysis of acid-tolerance mechanism based on membrane microdomains in Saccharomyces cerevisiae

BackgroundSaccharomyces cerevisiae has been used in the biosynthesis of acid products such as organic acids owing to its acid tolerance. Improving the acid tolerance of S. cerevisiae is beneficial for expanding its application range. Our previous study isolated the TAMC strain that was tolerant to a pH 2.3 through adaptive laboratory evolution; however, its mechanism underlying tolerance to low pH environment remains unclear.ResultsIn this study, through visual observation and order analysis of plasma membrane and membrane microdomains, we revealed that the membrane microdomains of TAMC strain play an indispensable role in acid tolerance. Transcriptomic analysis showed an increase in the expression of genes related to key components of membrane microdomains in TAMC strain. Furthermore, an obvious reduction was observed in the acid tolerance of the strain with sterol C-24 methyltransferase encoding gene ERG6 knockout for inhibiting membrane microdomain formation. Finally, colocalization analysis of H+-ATPase PMA1 and plasma membrane protein PMP1 showed that disruption of membrane microdomains could inhibit the formation of the H+-ATPase complex.ConclusionsMembrane microdomains could provide a platform for forming H+-ATPase complexes to facilitate intracellular H+ homeostasis, and thereby improve cell acid resistance. This study proposed a novel acid tolerance mechanism, providing a new direction for the rational engineering of acid-tolerant strains.

Antagonistic Activity of Volatile Organic Compounds Produced by Acid-Tolerant Pseudomonas protegens CLP-6 as Biological Fumigants To Control Tobacco Bacterial Wilt Caused by Ralstonia solanacearum.

Tobacco bacterial wilt, which is caused by Ralstonia solanacearum, is a devastating soilborne disease of tobacco worldwide and is widespread in the continuously acidic fields of southern China. Here, the fumigation activity under different pH conditions, component identification, and bioactivity of the volatile organic compounds (VOCs) produced by an acid-tolerant strain, Pseudomonas protegens CLP-6, were investigated. There was a wide antimicrobial spectrum of the VOCs against phytopathogens, including four bacteria, eight fungi, and two oomycetes. The antagonistic activity of the VOCs against R. solanacearum was proportionally correlated with the concentration of the inoculum, amount, culture time, and culture pH for CLP-6. The number of gene copies of R. solanacearum was significantly inhibited by VOCs produced at pH 5.5 in vivo. The control effect of VOCs emitted at pH 5.5 was 78.91% for tobacco bacterial wilt, which was >3-fold greater than that at pH 7.0. Finally, the main volatile compounds were identified by solid-phase microextraction (SPME)-gas chromatography-mass spectroscopy (GC-MS) as S-methyl thioacetate, methyl thiocyanate, methyl disulfide, 1-decene, 2-ethylhexanol, 1,4-undecadiene, 1-undecene, 1,3-benzothiazole, and 2,5-dimethylpyrazine, and the inhibition rates of 1,3-benzothiazole, 2-ethylhexanolmethyl thiocyanate, dimethyl disulfide, and S-methyl thioacetate were 100%, 100%, 88.91%, 67.64%, and 53.29%, respectively. S-Methyl thioacetate was detected only at pH 5.5. In summary, VOCs produced by P. protegens CLP-6 had strong antagonistic activities against phytopathogens, especially R. solanacearum, under acidic conditions and could be used to develop a safe and additive fumigant against R. solanacearum on tobacco and even other Solanaceae crop bacterial wilt diseases in acidic fields. IMPORTANCE VOCs produced by beneficial bacteria penetrate the rhizosphere to inhibit the growth of plant-pathogenic microorganisms; thus, they have the potential to be used as biological agents in controlling plant diseases. Tobacco bacterial wilt, which is caused by the acidophilic pathogen R. solanacearum, is a major bacterial disease in southern China and is prevalent in acidic soil. In this study, we discovered that the VOCs produced by P. protegens CLP-6 had excellent inhibitory effects on important plant pathogens. Moreover, two of the VOCs, namely, 1,3-benzothiazole and 2-ethylhexanol, had excellent inhibitory effect on R. solanacearum, and another VOC substance, methyl thiocyanate, was produced only at pH 5.5. The VOCs produced by the acid-tolerant strain P. protegens CLP-6 may have potential as environment-friendly microbial fumigant agents for bacterial wilt of tobacco or even other Solanaceae crops in acidic soils in China.

New Papiliotrema laurentii UFV-1 strains with improved acetic acid tolerance selected by adaptive laboratory evolution

The production of yeast oil from lignocellulosic biomasses is impaired by inhibitors formed during the pretreatment step, mainly acetic acid. Herein, we applied Adaptive Laboratory Evolution (ALE) to select three Acetic acid Tolerant Strains (ATS) of P. laurentii UFV-1. Different phenotypes emerged alongside evolution. The ATS II presented trade-offs in the absence of acetic acid, suggesting that it displays a specialized phenotype of tolerance to growth on organic acids. On the other hand, ATS I and ATS III presented phenotypes associated with the behavior of generalists. ATS I was considered the most promising evolved strain as it displayed the oleaginous phenotype in all conditions tested. Thus, we applied whole-genome sequencing to detect the mutations that emerged in this strain during the ALE. We found alterations in genes encoding proteins involved in different cellular functions, including multidrug resistance (MDR) transporters, energy metabolism, detoxification, coenzyme recycling, and cell envelope remodeling. To evaluate acetic acid stress responses, both parental and ATS I strains were cultivated in chemostat mode in the absence and presence of acetic acid. In contrast to ATS I, the parental strain presented alterations in the cell envelope and cell size under acetic acid stress conditions. Furthermore, the parental strain and the ATS I presented differences regarding acetic acid assimilation. Contrary to the parental strain, the ATS I displayed an increase in unsaturated fatty acid content irrespective of acetic acid stress, which might be related to improved tolerance to acetic acid. Altogether, these results provided insights into the mechanisms involved with the acetic acid tolerance displayed by ATS I and the responses of P. laurentii to this stressful condition.

Effect of Biltong Dried Beef Processing on the Reduction of Listeria monocytogenes, E. coli O157:H7, and Staphylococcus aureus, and the Contribution of the Major Marinade Components.

Biltong is a dry beef product that is manufactured without a heat lethality step, raising concerns of whether effective microbial pathogen reduction can occur during biltong processing. Raw beef inoculated with 4-strain cocktails of either E. coli O157:H7, Listeria monocytogenes, or Staphylococcus aureus, and processed with a standard biltong process, were shown to incur a >5-log reduction in 6–8 days after marination by vacuum-tumbling for 30 min in vinegar, salt, spices (coriander, pepper) when dried at 23.9 °C (75 °F) at 55% relative humidity (RH). Pathogenic challenge strains were acid-adapted in media containing 1% glucose to ensure that the process was sufficiently robust to inhibit acid tolerant strains. Internal water activity (Aw) reached < 0.85 at 5-log reduction levels, ensuring that conditions were lower than that which would support bacterial growth, or toxin production by S. aureus should it be internalized during vacuum tumbling. This was further confirmed by ELISA testing for staphylococcal enterotoxins A and B (SEA, SEB) after marination and again after 10 days of drying whereby levels were lower than initial post-marination levels. Comparison of log reduction curves obtained for E. coli O157:H7, L. monocytogenes, S. aureus, and Salmonella (prior study) showed that microbial reduction was not significantly different (p < 0.05) demonstrating that even without a heat lethality step, the biltong process we examined produces a safe beef product according to USDA-FSIS guidelines.

Synthetic acid stress-tolerance modules improve growth robustness and lysine productivity of industrial Escherichia coli in fermentation at low pH

BackgroundDuring fermentation, industrial microorganisms encounter multiple stresses that inhibit cell growth and decrease fermentation yields, in particular acid stress, which is due to the accumulation of acidic metabolites in the fermentation medium. Although the addition of a base to the medium can counteract the effect of acid accumulation, the engineering of acid-tolerant strains is considered a more intelligent and cost-effective solution. While synthetic biology theoretically provides a novel approach for devising such tolerance modules, in practice it is difficult to assemble stress-tolerance modules from hundreds of stress-related genes.ResultsIn this study, we designed a set of synthetic acid-tolerance modules for fine-tuning the expression of multi-component gene blocks comprising a member of the proton-consuming acid resistance system (gadE), a periplasmic chaperone (hdeB), and reactive oxygen species (ROS) scavengers (sodB and katE). Directed evolution was used to construct an acid-responsive asr promoter library, from which four variants were selected and used in the synthetic modules. The module variants were screened in a stepwise manner under mild acidic conditions (pH 5–6), first by cell growth using the laboratory Escherichia coli strain MG1655 cultured in microplates, and then by lysine production performance using the industrial lysine-producing E. coli strain MG1655 SCEcL3 cultured first in multiple 10-mL micro-bioreactors, and then in 1.3-L parallel bioreactors. The procedure resulted in the identification of a best strain with lysine titer and yield at pH 6.0 comparable to the parent strain at pH 6.8.ConclusionOur results demonstrate a promising synthetic-biology strategy to enhance the growth robustness and productivity of E. coli upon the mildly acidic conditions, in both a general lab strain MG1655 and an industrial lysine-producing strain SCEcL3, by using the stress-responsive synthetic acid-tolerance modules comprising a limited number of genes. This study provides a reliable and efficient method for achieving synthetic modules of interest, particularly in improving the robustness and productivity of industrial strains.

Identification of Kic1p and Cdc42p as Novel Targets to Engineer Yeast Acetic Acid Stress Tolerance

Robust yeast strains that are tolerant to multiple stress environments are desired for an efficient biorefinery. Our previous studies revealed that zinc sulfate serves as an important nutrient for stress tolerance of budding yeast Saccharomyces cerevisiae. Acetic acid is a common inhibitor in cellulosic hydrolysate, and the development of acetic acid-tolerant strains is beneficial for lignocellulosic biorefineries. In this study, comparative proteomic studies were performed using S. cerevisiae cultured under acetic acid stress with or without zinc sulfate addition, and novel zinc-responsive proteins were identified. Among the differentially expressed proteins, the protein kinase Kic1p and the small rho-like GTPase Cdc42p, which is required for cell integrity and regulation of cell polarity, respectively, were selected for further studies. Overexpression of KIC1 and CDC42 endowed S. cerevisiae with faster growth and ethanol fermentation under the stresses of acetic acid and mixed inhibitors, as well as in corncob hydrolysate. Notably, the engineered yeast strains showed a 12 h shorter lag phase under the three tested conditions, leading to up to 52.99% higher ethanol productivity than that of the control strain. Further studies showed that the transcription of genes related to stress response was significantly upregulated in the engineered strains under the stress condition. Our results in this study provide novel insights in exploring zinc-responsive proteins for applications of synthetic biology in developing a robust industrial yeast.

Acid Tolerant and Acidophilic Microalgae: An Underexplored World of Biotechnological Opportunities.

Despite their large number and diversity, microalgae from only four genera are currently cultivated at large-scale. Three of those share common characteristics: they are cultivated mainly autotrophically and are extremophiles or tolerate “extreme conditions.” Extreme growth conditions aid in preventing contamination and predation of microalgae, therefore facilitating outdoor cultivation. In search for new extremophilic algae suitable for large-scale production, we investigated six microalgal strains able to grow at pH below 3 and belonging to four genera; Stichococcus bacillaris ACUF158, Chlamydomonas acidophila SAG 2045, and Chlamydomonas pitschmannii ACUF238, Viridiella fridericiana ACUF035 and Galdieria sulphuraria ACUF064 and ACUF074. All strains were cultivated autotrophically at light intensity of 100 and 300 μmol m−2 s−1 and pH between 1.9 and 2.9. The autotrophic biomass productivities were compared with one of the most productive microalgae, Chlorella sorokiniana SAG 211-8K, grown at pH 6.8. The acid tolerant strains have their autotrophic biomass productivities reported for the first time. Mixotrophic and heterotrophic properties were investigated when possible. Five of the tested strains displayed autotrophic biomass productivities 10–39% lower than Chlorella sorokiniana but comparable with other commercially relevant neutrophilic microalgae, indicating the potential of these microalgae for autotrophic biomass production under acidic growth conditions. Two acid tolerant species, S. bacillaris and C. acidophila were able to grow mixotrophically with glucose. Chlamydomonas acidophila and the two Galdieria strains were also cultivated heterotrophically with glucose at various temperatures. Chlamydomonas acidophila failed to grow at 37°C, while G. sulphuraria ACUF64 showed a temperature optimum of 37°C and G. sulphuraria ACUF74 of 42°C. For each strain, the biomass yield on glucose decreased when cultivated above their optimal temperature. The possible biotechnological applications of our findings will be addressed.

Probiotic Lactobacillus brevis CLB3 prevents azoxymethane/dextran sulfate sodium-induced colon carcinogenesis in mice by reducing amino acid transport and IL-17A levels and repressing the IL-6/AKT/p-STAT3 signaling pathway

Abstract Amino acid intake plays a crucial role in the Warburg effect of cancer. Gut microbes can regulate intestinal amino acid metabolism. However, it is still unknown whether probiotic therapy can protect the host from intestinal tumor invasion by reducing amino acid intake. With in vitro methods, three acid-tolerant strains from fermented pickles were screened out. Using azoxymethane/dextran sulfate sodium-induced colon cancer models, we evaluated the therapeutic effects of Lactobacillus brevis CLB3, Lactobacillus plantarum XLP, and Lactobacillus johnsonii CM on model mice. Their functional mechanisms were further explained through anatomy section, quantitative reverse transcrip­tion polymerase chain reaction (qRT-PCR), Western blot, and immunohistochemical staining analyses as well as database mining and gut culturomics. The Lactobacillus brevis (L. brevis) CLB3 treatment significantly improved the clinical signs and symptoms of colon cancer, alleviated colon damage, and inhibited colon carcinogenesis in mice. In addition, this treatment significantly increased gut cultivable Lactobacillus abundance, inhibited the expression and translation levels of the tumor metabolism-related solute carrier (SLC) amino acid transporter including SLC7A5 and SLC7A11, lowered circulating interleukin-6 (IL-6) and interleukin-17A (IL-17A) levels, and improved the accumulation of tumor-infiltrating lymphocytes and cancer proliferation factors. These findings suggest that L. brevis CLB3 can reduce amino acid transport, inhibit mammalian target of rapamycin (mTOR) signaling and enhance intestinal anti-tumor immune responses, which provides a potential targeting amino acid transporter strategy for preventing colorectal cancer.

Overexpression of a leucine transfer RNA gene tL(CAA)K improves the acetic acid tolerance of Saccharomyces cerevisiae

Acetic acid is a common inhibitor present in lignocellulosic hydrolysate. Development of acetic acid tolerant strains may improve the production of biofuels and bio-based chemicals using lignocellulosic biomass as raw materials. Current studies on stress tolerance of yeast Saccharomyces cerevisiae have mainly focused on transcription control, but the role of transfer RNA (tRNA) was rarely investigated. We found that some tRNA genes showed elevated transcription levels in a stress tolerant yeast strain. In this study, we further investigated the effects of overexpressing an arginine transfer RNA gene tR(ACG)D and a leucine transfer RNA gene tL(CAA)K on cell growth and ethanol production of S. cerevisiae BY4741 under acetic acid stress. The tL(CAA)K overexpression strain showed a better growth and a 29.41% higher ethanol productivity than that of the control strain. However, overexpression of tR(ACG)D showed negative influence on cell growth and ethanol production. Further studies revealed that the transcriptional levels of HAA1, MSN2, and MSN4, which encode transcription regulators related to stress tolerance, were up-regulated in tL(CAA)K overexpressed strain. This study provides an alternative strategy to develop robust yeast strains for cellulosic biorefinery, and also provides a basis for investigating how yeast stress tolerance is regulated by tRNA genes.

QTL mapping of a Brazilian bioethanol strain links the cell wall protein-encoding gene GAS1 to low pH tolerance in S. cerevisiae

BackgroundSaccharomyces cerevisiae is largely applied in many biotechnological processes, from traditional food and beverage industries to modern biofuel and biochemicals factories. During the fermentation process, yeast cells are usually challenged in different harsh conditions, which often impact productivity. Regarding bioethanol production, cell exposure to acidic environments is related to productivity loss on both first- and second-generation ethanol. In this scenario, indigenous strains traditionally used in fermentation stand out as a source of complex genetic architecture, mainly due to their highly robust background—including low pH tolerance.ResultsIn this work, we pioneer the use of QTL mapping to uncover the genetic basis that confers to the industrial strain Pedra-2 (PE-2) acidic tolerance during growth at low pH. First, we developed a fluorescence-based high-throughput approach to collect a large number of haploid cells using flow cytometry. Then, we were able to apply a bulk segregant analysis to solve the genetic basis of low pH resistance in PE-2, which uncovered a region in chromosome X as the major QTL associated with the evaluated phenotype. A reciprocal hemizygosity analysis revealed the allele GAS1, encoding a β-1,3-glucanosyltransferase, as the casual variant in this region. The GAS1 sequence alignment of distinct S. cerevisiae strains pointed out a non-synonymous mutation (A631G) prevalence in wild-type isolates, which is absent in laboratory strains. We further showcase that GAS1 allele swap between PE-2 and a low pH-susceptible strain can improve cell viability on the latter of up to 12% after a sulfuric acid wash process.ConclusionThis work revealed GAS1 as one of the main causative genes associated with tolerance to growth at low pH in PE-2. We also showcase how GAS1PE-2 can improve acid resistance of a susceptible strain, suggesting that these findings can be a powerful foundation for the development of more robust and acid-tolerant strains. Our results collectively show the importance of tailored industrial isolated strains in discovering the genetic architecture of relevant traits and its implications over productivity.

Development of an Haa1-based biosensor for acetic acid sensing in Saccharomyces cerevisiae

ABSTRACTAcetic acid is one of the main inhibitors of lignocellulosic hydrolysates and acetic acid tolerance is crucial for the development of robust cell factories for conversion of biomass. As a precursor of acetyl-coenzyme A, it also plays an important role in central carbon metabolism. Thus, monitoring acetic acid levels is a crucial aspect when cultivating yeast. Transcription factor-based biosensors represent useful tools to follow metabolite concentrations. Here, we present the development of an acetic acid biosensor based on the Saccharomyces cerevisiae transcription factor Haa1 that upon binding to acetic acid relocates to the nucleus. In the biosensor, a synthetic transcription factor consisting of Haa1 and BM3R1 from Bacillus megaterium was used to control expression of a reporter gene under a promoter containing BM3R1 binding sites. The biosensor did not drive expression under a promoter containing Haa1 binding sites and responded to acetic acid over a linear range spanning from 10 to 60 mM. To validate its applicability, the biosensor was integrated into acetic acid-producing strains. A direct correlation between biosensor output and acetic acid production was detected. The developed biosensor enables high-throughput screening of strains producing acetic acid and could also be used to investigate acetic acid-tolerant strain libraries.

Propionic acid production from glycerol in immobilized cell bioreactor using an acid-tolerant strain of Propionibacterium acidipropionici obtained by adaptive evolution

Propionic acid (PA) production from agro-industrial residues using propionibacteria has gained interest as an alternative to fossil-based process. Microbial production is however characterized by product inhibition, lowering the product titers and productivity. In this study, Propionibacterium acidipropionici DSMZ4900 was subjected to adaptive evolution to tolerate higher acid concentrations. The strain adapted to growth in medium spiked with 20 g/L PA exhibited improved product titer (16.8 vs 8.72 g/L) and productivity (0.52 vs 0.17 g/L·h) with glycerol as carbon source in batch fermentations. It was immobilized on polyethyleneimine coated recycled glass beads Poraver® and used for fermentations in recycle batch mode with increasing glycerol concentration and decreasing pH, respectively. Doubling yeast extract concentration raised PA yield and productivity by >1.5 fold. Glycerol at 100 g/L was completely consumed to give ∼58 g/L PA at yield of 0.64 mol/mol and productivity of 0.28 g/L·h at pH 6.5. Decreasing fermentation pH to 5.0 increased PA productivity to 0.23 g/L·h from 0.14 g/L·h at pH 6.0 with 20 g/L glycerol, while immobilized cells exhibited no growth. The study shows combination of adaptive evolution and immobilization of cells to result in a robust system for PA fermentation at high glycerol concentration and lower pH.

Whole-genome sequencing and genomic-based acid tolerance mechanisms of Lactobacillus delbrueckii subsp. bulgaricus LJJ.

The probiotic efficacy and fermentative ability of Lactobacillus delbrueckii subsp. bulgaricus (L. bulgaricus), a widely used probiotic, is majorly affected by its acid tolerance. Here, we conducted whole-genome sequencing of the high acid-tolerant L. bulgaricus LJJ stored in the laboratory. Compared with the whole genome of low acid-tolerant strain L. bulgaricus ATCC11842, the results show that 16 candidate acid-tolerant genes may be involved in the regulation of the acid tolerance of L. bulgaricus LJJ. Association analysis of candidate acid-tolerant genes and acid-tolerant traits of different L. bulgaricus strains revealed that the three genes dapA, dapH, and lysC are the main reasons for the strong acid tolerance of L. bulgaricus LJJ. The results of real-time quantitative PCR (RT-qPCR) supported this conclusion. KEGG pathway analysis showed that these three acid-tolerant genes are involved in the synthesis of lysine; the synthesis of lysine may confer L. bulgaricus LJJ strong acid tolerance. This study successfully revealed the acid tolerance mechanism of L. bulgaricus LJJ and provides a theoretical basis for the subsequent selection of strains with high acid tolerance for improved probiotic functions. KEY POINTS: • Three genes are identified as acid-tolerant genes, respectively, lysC, dapA, and dapH. • LysC and dapA are the major key genes in the synthesis of lysine. • The synthesis of lysine may confer L. bulgaricus LJJ strong acid tolerance.

Isolation and characterization of an acid and metal tolerant Enterobacter cloacae NZS strain from former mining lake in Selangor, Malaysia

BackgroundMetal polluted environments have been found to harbor acid and metal tolerant bacterial communities. Metal oxidizing bacteria in particular are industrially important microorganisms that can be utilized for potential applications in biomining and bioremediation. However, some well-characterized strains are not readily culturable as they are obligate and fastidious chemolithotrophs requiring special techniques for their cultivation. Hence, this study was aimed at isolating, identifying, and characterizing indigenous metal tolerant heterotroph(s) from abandoned mines that can potentially be used for biomining or bioremediation processes in the future.ResultsSeventeen bacteria from former mining lakes were isolated and identified using 16S rRNA. Minimal inhibition concentration (MIC) and growth study of isolated bacteria carried out in Luria-Bertani media containing three different metals ions, zinc (II), copper (II), and iron (II), showed that a particular isolate termed Enterobacter cloacae NZS was found to exhibit better growth and tolerance for copper (up to 90 mM), zinc (up to 200 mM), and iron (up to 170 mM). Growth of the strain was notably well in the presence of iron (II). Compared to all the isolates, only E. cloacae NZS was able to be enumerated at pH lower than 5 while other strains were culturable only at pH 7. Its capability in iron (II) oxidation was preliminary assessed based on the pH, cell count, glucose consumption, and amount of iron oxidized throughout incubation in 9K media. E. cloacae NZS strain was found to be capable of oxidizing iron (II) supplied in 9K media to iron (III).ConclusionAs preliminary investigation showed that E. cloacae NZS was able to oxidize iron (II) in 9K media at pH2, further optimization on the strain, medium, and culture conditions in future may be able to provide a better insight on this strain to be possibly used as an iron oxidizer for various applications.