Acid Diethyl Ester Research Articles

(Mechano)chemical modification of polyvinyl chloride with azole-based drugs

Polyvinyl chloride (PVC) plays an important role in industry; however, due to its uncontrolled accumulation in the environment, the methods for its utilization are of high demand. Herein we wish to report an approach for the utilization of PVC via its use as a carrier for some azole-based drugs, such as 2-mercaptobenzothiazole (multi-activity drug), 4-oxo-1,4-dihydropyrazolo[5,1-c]-1,2,4-triazine-3,8-dicarboxylic acid diethyl ester (antidiabetic drug) and 5-methyl-6-nitro-7-oxo-1,2,4-triazolo[1,5-a]pyrimidinide (antiviral drug). The abovementioned approach involves the reaction between PVC and potassium or sodium salts of these azole-based drugs either in solution or under ball-milling conditions. The as-obtained PVCs modified with azole-based drugs were isolated for the first time and characterized by means of 1H NMR-spectroscopy as well as gel-permeation chromatography (GPC).

The Surprising Reactivity of Chloromethyl Chlorosulfate with Active Methylene Compounds

AbstractCondensation of chloromethyl chlorosulfate (1) with alkyl 1,3‐keto esters under phase‐transfer catalysis (PTC) conditions led to methylene bridged bis‐acetoacetates through a sequential chloromethylation‐β‐elimination‐Michael addition process. The latter compounds further evolved towards polyfunctional dihydrofuran and tetrahydropyran derivatives by competitive chloromethylation/chlorination reaction. In aprotic organic solvent, chlorination of the methylene active group is the main process and proceeded by reaction of the enolate of acetoacetate with the chlorine atom bound to the sulfonyl group of 1. The reactivity of some other active methylene compounds under PTC conditions was investigated. Acetylacetone reacted similarly to ethyl acetoacetate providing O‐heterocycles while ethyl cyanoacetate gave diethyl 2,4‐dicyanoglutaric acid diethyl ester together with 2‐diethyl 1,2‐dicyanocyclopropane‐1,2‐dicarboxylate. A plausible reaction mechanism is proposed whose the key feature is the competitive halogenation/chloromethylation of the intermediate methylene bridge dimeric active methylene compounds followed by intramolecular cyclization.

Deep and shallow level defect passivation via fluoromethyl phosphonate for high performance air-processed perovskite solar cells

Air-processed perovskite solar cells (PSCs) with high performance are considered to be the inevitable trend of low-cost commercial manufacturing. Nevertheless, the deep- and shallow-level defects of humid-air-processed perovskite films are the main sources of photoelectric conversion efficiency (PCE) deficit. Herein, a difluoromethyl phosphonic acid diethyl ester (2F-PAE) with tri-chelation sites is implanted into perovskite absorber to passivate uncoordinated Pb2+/Pb clusters and raise formation energies of vacancies in perovskite films. The P = O/C-O groups in 2F-PAE offer tri-chelation sites to bind tightly with uncoordinated Pb2+/Pb clusters, which passivates deep-level defects and regulates perovskite crystallization. -CF2 groups in 2F-PAE generate electrostatic interaction with FA+, which helps to passivate shallow-level defects. The formation energies of Pb, I and FA vacancies can be increased by more than twice under the synergistic passivation of P = O, C-O and -CF2. Thus, the open-circuit voltage (VOC) of the humid-air-processed PSCs with 2F-PAE increases to 1.188 V. 2F-PAE passivated PSCs dramatically improve the PCE from 20.54 % to 23.69 %. PSCs using 2F-PAE display excellent moisture and thermal stability, retaining 82 % of its initial efficiency after 1500 h under continuous illumination, while the control PSCs maintain only 44 %. This strategy offers crucial insights for selecting multifunctional molecules to boost the performance of PSCs.

Natural product-inspired synthesis of coumarin-chalcone hybrids as potential anti-breast cancer agents.

Twelve novel neo-tanshinlactone-chalcone hybrid molecules were constructed through a versatile methodology involving the Horner-Wadsworth-Emmons (HWE) olefination of 4-formyl-2H-benzo [h]chromen-2-ones and phosphonic acid diethyl esters, as the key step, and evaluated for anticancer activity against a series of four breast cancers and their related cell lines, viz. MCF-7 (ER + ve), MDA-MB-231 (ER-ve), HeLa (cervical cancer), and Ishikawa (endometrial cancer). The title compounds showed excellent to moderate in vitro anti-cancer activity in a range of 6.8-19.2µM (IC50). Compounds 30 (IC50 = 6.8µM and MCF-7; IC50 = 8.5µM and MDA-MB-231) and 31 (IC50 = 14.4 µM and MCF-7; IC50 = 15.7µM and MDA-MB-231) exhibited the best activity with compound 30 showing more potent activity than the standard drug tamoxifen. Compound 30 demonstrated a strong binding affinity with tumor necrosis factor α (TNF-α) in molecular docking studies. This is significant because TNFα is linked to MCF-7 cancer cell lines, and it enhances luminal breast cancer cell proliferation by upregulating aromatase. Additionally, virtual ADMET studies confirmed that hybrid compounds 30 and 31 met Lipinski's rule; displayed high bioavailability, excellent oral absorption, favorable albumin interactions, and strong penetration capabilities; and improved blood-brain barrier crossing. Based on the aforementioned results, compound 30 has been identified as a potential anti-breast cancer lead molecule.

Monomer Choice Influences N-Acryloyl Amino Acid Grafter Conversion via Protease Catalysis.

End-capped peptides modified with reactive functional groups on the N-terminus provide a route to prepare peptide-polymer conjugates for a broad range of applications. Unfortunately, current chemical methods to construct modified peptides rely largely on solid-phase peptide synthesis (SPPS), which lacks green preparative characteristics and is costly, thus limiting its applicability to specialty applications such as regenerative medicine. This work evaluates N-terminally modified N-acryloyl-glutamic acid diethyl ester, N-acryloyl-leucine ethyl ester, and N-acryloyl-alanine ethyl ester as grafters and papain as the protease for the direct addition of amino acid ethyl ester (AA-OEt) monomers via protease-catalyzed peptide synthesis (PCPS) and the corresponding formation of N-acryloyl-functionalized oligopeptides in a one-pot aqueous reaction. It was hypothesized that by building N-acryloyl grafters from AA-OEt monomers that are known to be good substrates for papain in PCPS, the corresponding grafters would yield high grafter conversions, high ratio of grafter-oligopeptide to free NH2-oligopeptide, and high overall yield. However, this work demonstrates based on the grafter/monomers studied herein that the dominant factor in N-acryloyl-AA-OEt grafter conversion is the co-monomer used in co-oligomerizations. Computational modeling using Rosetta qualitatively recapitulates the results and provides insight into the structural and energetic bases underlying substrate selectivity. The findings herein expand our knowledge of factors that determine the efficiency of preparing N-acryloyl-terminated oligopeptides by PCPS that could provide practical routes to peptide macromers for conjugation to polymers and surfaces for a broad range of applications.

Synthesis of new macrocyclic triperoxides

An efficient method has been developed for the synthesis of dialkyl hexaoxadispiroalkanedicarboxylates by the recyclization reaction of heptaoxadispiroalkanes with alkyl malonates (malonic acid dimethyl ester, malonic acid diethyl ester, malonic acid diisopropyl ester) under the action of lanthanide catalysts.

RF03 | PMON288 Determining Mechanisms of Farnesoid×Receptor Regulation of Heme Biosynthesis and Ductular Reaction

Abstract Bile acids are increasingly becoming recognized as hormones, and their main endogenous receptor is the farnesoid X receptor (FXR). In order to investigate whether FXR is necessary to maintain proliferation of the bile ducts in response to injury, we challenged male and female wild-type (WT) and Fxr knockout (FxrKO) mice with 0.1% 1,4 dihydro 2,4,6 trimethyl 3,5 pyridinediacarboxylic acid diethyl ester (DDC) in the diet for two weeks. DDC is an inhibitor of ferrochelatase, the final enzyme of heme biosynthesis, resulting in a buildup of bile plugs in the liver causing an inflammatory response called ductular reaction. We found that deletion of Fxr led to a dramatic reduction in the ductular reaction independent of the sex. Then we tested if the inhibition of ferrochelatase was compensated for in FxrKO mice by analyzing the expression of genes in the heme biosynthesis pathway. Although we find a decrease in basal Alad gene expression in FxrKO mice in both sexes, upon DDC treatment, expression does not decrease as much as seen in the WT mice. Intriguingly, we also noted sex-specific changes. Cpox expression was increased in male FxrKO mice, but FxrKO mice showed reduced suppression of Cpox expression when treated with DDC. Conversely, Ppox expression was reduced in male FxrKO mice compared to WT mice, and both male WT and FxrKO mice had a comparable reduction in Ppox expression upon DDC treatment. Female FxrKO mice showed a significant decrease in Fech expression basally that did not change with DDC treatment. These results suggest that FXR may contribute towards regulating expression of genes in the heme biosynthesis pathway. However, these observations do not explain the lack of ductular reaction. Since PGC1α was previously shown to control heme biosynthesis through its downstream targets, FOXO1 and NRF1, we examined their transcript expression in our study to determine if the pathway is playing a role in our observations. We examined this pathway and observed a significant decrease in Foxo1 expression in both sexes of WT and FxrKO mice basally but only a reduction in Nrf1 expression upon DDC treatment. We are currently investigating other potential regulators of heme biosynthesis and ductular reaction, such as Klf1 which regulates erythropoiesis and plays a role in ductular reaction and the nuclear receptors Rev-Erbα/β that use heme as a ligand, to determine how FXR is regulating heme biosynthesis. Presentation: Saturday, June 11, 2022 1:24 p.m. - 1:29 p.m., Monday, June 13, 2022 12:30 p.m. - 2:30 p.m.

Theoretical Validation of In Chemico Skin Sensitization Assay "ADRA" Using the Products Formed by Nucleophilic Reagents and Chemicals.

Amino acid derivative reactivity assay (ADRA) is an in chemico assay for assessing the skin sensitization potential of chemicals by evaluating the reactivity of nucleophilic reagents that mimic skin proteins. N-(2-(1-Naphthyl)acetyl)-l-cysteine (NAC) and α-N-(2-(1-naphthyl)acetyl)-l-lysine (NAL), used as nucleophilic reagents, are small-molecule derivatives of two different amino acids, each with a naphthalene ring attached. The rate of decrease in the amount of NAC or NAL in the reaction solution is evaluated in this assay as an indicator of the test substance's skin sensitization ability. However, the products formed between the nucleophilic reagent and the test substance, which play an important role in vivo, are not directly identified. Therefore, six highly reactive chemicals, including the proficiency substances listed in the OECD Test Guidelines─squaric acid diethyl ester, 2-methyl-2H-isothiazol-3-one (MI), p-benzoquinone, palmitoyl chloride, diphenylcyclopropenone (DPCP), and imidazolidinyl urea (IU)─were used to determine each formed product. Samples were prepared according to the standard ADRA method, and the formed products were predicted on the basis of the reaction mechanism. Excluding DPCP, the estimated structures were validated using mass spectrometry and nuclear magnetic resonance spectrometry on the synthesized samples. In this manner, the products of each nucleophile were confirmed for all examined test substances. The estimated structure products were obtained through a series of reactions initiated by the nucleophilic attack of NAC's thiol group or NAL's amino group on the test substance's electron-deficient carbonyl carbon. However, contrary to expectations, disulfide-linked-type ring-opened products were detected in the case of MI, and products with free formaldehyde in solution were detected in the case of IU. In summary, all skin sensitizers tested herein reacted with NAC and/or NAL to give products. This supports the theoretical validity of ADRA, which provides an indirect evaluation of the formed products based on a decrease in nucleophilic reagents.

Spectroscopic and Physicochemical Investigations of Azomethines with Triphenylamine Core towards Optoelectronics.

Three new azomethines based on triphenylamine with two or three substituents were obtained. Chemical structure and purity were confirmed by 1H NMR, FTIR elemental analysis and mass spectroscopy. The investigations were focused on the relationship between chemical structure and properties important for optoelectronic materials. Thus, the studies of thermal, optical and electrochemical properties were carried out based on differential scanning calorimetry, thermogravimetric analysis, electronic absorption, photoluminescence and cyclic voltammetry measurements. The ongoing consideration of experimental results was complemented by theoretical calculations using the density functional theory method. The donor activity of obtained compounds was tested in bulk-heterojuntion photovoltaic cells with structure ITO/PEDOT:PSS/imine:PCBM/Al and ITO/PEDOT:PSS/imine:P3HT:PCBM/Al). The effect of the presence of the amino-thiophene-3,4-dicarboxylic acid diethyl ester groups and various number of hexyloxyphenyl units on imines properties was demonstrated.

The Study of Deep Eutectic Solvent Based on Choline Chloride and L-(+)-Tartaric Acid Diethyl Ester for Transdermal Delivery System.

Deep eutectic solvents (DESs) based on choline chloride (C) and L-(+)-tartaric acid diethyl ester (L) were prepared and used in transdermal drug delivery system (TDDS). The internal chemistry structure including the formation and changes of hydrogen bonds of choline chloride and L-(+)-tartaric acid diethyl ester DES was characterized via attenuated total reflection Fourier transform infrared (ATR-FTIR) and 1H nuclear magnetic resonance (1H NMR) spectroscopy. The stoichiometric ratio of choline chloride to L-(+)-tartaric acid diethyl ester as well as water content affected the viscosity, glass transition temperature (Tg), and drug solubility of the DES. The viscosity and glass transition temperature of the DES (CL14) prepared at the ratio of 1:4 of choline chloride to L-(+)-tartaric acid diethyl ester were 1.19 Pa·s and - 44.01°C, respectively, and decreased to 0.10 Pa·s and - 55.31°C when 10% water (CL1410) was added. Taking diclofenac diethylamine (DDEA), the nonsteroidal anti-inflammatory drug as model, drug solubility was as high as 60 mg/ml and 250 mg/ml in CL14 and CL1410, respectively. The cumulative amount of DDEA was 4.63 ± 2.67 μg/cm2 and 15.27 ± 4.63 μg/cm2 for CL14 and CL1410, respectively, at 8 h. The mechanism of percutaneous permeability by the DES may be the disturbance of stratum corneum (SC) lipids as well as changes in the protein conformations. CL14 and CL1410 were also verified as low-cytotoxic and nonirritant. Therefore, the DESs studied are promising to be used in drug solubilization enhancement and transdermal drug delivery system.

Discovery, total syntheses and potent anti-inflammatory activity of pyrrolinone-fused benzoazepine alkaloids Asperazepanones A and B from Aspergillus candidus

Natural products are well established as an important resource and play an important role in drug discovery. Here, two pyrrolinone-fused benzoazepine alkaloids, (+)-asperazepanones A (1) and B (2) with a 6/7/5 ring system, together with the artifact (−)-asperazepanone A (1), were isolated from the coral-derived Aspergillus candidus fungus. Their structures including absolute configurations were elucidated by extensive spectroscopic methods, single crystal X-ray diffraction, and ECD calculations. Furthermore, total syntheses of (±)-1 and (±)-2 have been achieved starting from the commercially L-aspartic acid diethyl ester hydrochloride and monoethyl malonate in 7 and 8 steps, respectively. The key step in the syntheses was an intramolecular Friedel-Crafts reaction to build the unique tricyclic skeleton. Interestingly, (+)-2 not only showed obviously inhibitory activity against NO production, but also inhibited potent LPS-induced expression of TNF-α and IL-6 at the concentration of 0.1 μM. It thus represents a potentially promising lead for anti-inflammatory drug discovery.

CPExtract, a Software Tool for the Automated Tracer-Based Pathway Specific Screening of Secondary Metabolites in LC-HRMS Data.

The use of stable isotopically labeled tracers is a long-proven way of specifically detecting and tracking derived metabolites through a metabolic network of interest. While the recently developed stable isotope-assisted methods and associated, supporting data analysis tools have greatly improved untargeted metabolomics approaches, no software tool is currently available that allows us to automatically and flexibly search liquid chromatography coupled with high-resolution mass spectrometry (LC-HRMS) chromatograms for user-definable isotopolog patterns expected for the metabolism of labeled tracer substances. Here, we present Custom Pattern Extract (CPExtract), a versatile software tool that allows for the first time the high-throughput search for user-defined isotopolog patterns in LC-HRMS data. The patterns can be specified via a set of rules including the presence or absence of certain isotopologs, their relative intensity ratios as well as chromatographic coelution. Each isotopolog pattern satisfying the respective rules is verified on an MS scan level and also in the chromatographic domain. The CPExtract algorithm allows the use of both labeled tracer compounds in nonlabeled biological samples as well as a reversed tracer approach, employing nonlabeled tracer compounds along with globally labeled biological samples. In a proof-of-concept study, we searched for metabolites specifically arising from the malonate pathway of the filamentous fungi Fusarium graminearum and Trichoderma reesei. 1,2,3-13C3-malonic acid diethyl ester and native malonic acid monomethyl ester were used as tracers. We were able to reliably detect expected fatty acids and known polyketides. In addition, up to 46 and 270 further, unknown metabolites presumably including novel polyketides were detected in the F. graminearum and T. reesei culture samples, respectively, all of which exhibited the user-predicted isotopolog patterns originating from the malonate tracer incorporation. The software can be used for every conceivable tracer approach. Furthermore, the rule sets can be easily adapted or extended if necessary. CPExtract is available free of charge for noncommercial use at https://metabolomics-ifa.boku.ac.at/CPExtract.

Within- and between-laboratory reproducibility and predictive capacity of amino acid derivative reactivity assay (ADRA) using a 0.5 mg/mL test chemical solution: Results of the study for reproducibility confirmation implemented in five participating laboratories.

The amino acid derivative reactivity assay (ADRA) is an in chemico alternative assay for skin sensitization listed in OECD test guideline 442C. ADRA evaluates the reactivity of sensitizers to proteins, which is key event 1 in the skin sensitization adverse outcome pathway. Although the current key event 1 evaluation method is a simple assay that evaluates nucleophile and test chemical reactivity, mixtures of unknown molecular weights cannot be evaluated because a constant molar ratio between the nucleophile and test chemical is necessary. In addition, because the nucleophile is quantified by HPLC, the frequency of co-eluting the test chemical and nucleophile increases when measuring multi-component mixtures. To solve these issues, test conditions have been developed using a 0.5 mg/mL test chemical solution and fluorescence-based detection. Since the practicality of these methods has not been substantiated, a validation test to confirm reproducibility was conducted in this study. The 10 proficiency substances listed in the ADRA guidelines were tested three times at five different laboratories. The results of both within- and between-laboratory reproducibility were 100%, and the results of ultraviolet- and fluorescence-based measurements were also consistent. In addition to the proficiency substances, a new positive control, squaric acid diethyl ester, was tested three times at the five laboratories. The results showed high reproducibility with N-(2-(1-naphthyl)acetyl)-l-cysteine depletion of 37%-52% and α-N-(2-(1-naphthyl)acetyl)-l-lysine depletion of 99%-100%. Thus, high reproducibility was confirmed in both evaluations of the 0.5 mg/mL test chemical and the fluorescence-based measurements, validating the practicability of these methods.

Crystallographic and computational investigations of structural properties in phenyl and methoxy‑phenyl substituted 1,4 dihydropyridine derivatives

Single crystal preparation of two 1,4-dihydropyridine (1,4-DHP) derivative molecules, namely, (i) 2,6-dimethyl-4-phenyl-1, 4-dihydro-pyridine-3, 5-dicarboxylic acid diethyl ester and (ii) 4-(4‑methoxy-phenyl)-2,6-dimethyl-1, 4-dihydro-pyridine-3, 5-dicarboxylic acid diethyl ester was done. Crystal structure solution and refinement of final R values converged to 0.0478 and 0.0466. Hirshfeld surface analysis mapped dnorm surfaces, shape index, curvedness and hydrogen bonding present in the molecules. These calculations established the relative contributions of the various intermolecular contacts to the total Hirshfeld surface area. Both the molecular structures were optimized and confirmed by Density Functional Theory (DFT) simulations in an implicit aqueous solvation environment. The molecular electrostatic potential (MEP) analysis elucidated the electrophilic and nucleophilic regions in the molecules to be the hydrogen attached to the nitrogen and the carboxyl oxygen atoms. Frontier molecular orbital analysis indicated the stability of these molecules while they appeared to be electrophilic in nature from the reactivity descriptors analysis.

Site-specific immobilization of papain on DDI-modified polystyrene beads for the oligo(γ-ethyl-L-glutamate) synthesis

In this paper, a reusable heterogeneous catalyst of papain was prepared and used to catalyze the polymerization for oligo-glutamate. In silico, the 9,9-bis(2,3-epoxypropyl) fluorenyl group (DDI) carried on polystyrene beads (PS-PEG-DDI) showed site-specific binding for sites which are far away the active site of papain. The immobilization of papain on PS-PEG-DDI reached the optimal value of 126 ± 2.5 mg/g beads and 1726.2 ± 34 U/g beads at the papain/beads ratio of 1:5 in phosphate buffer (pH 8.0, 200 mM) at 45 °C for 4 h. The storage stability, pH stability, thermal stability, solvent tolerance and resistance to metal ions of papain were enhanced by the immobilization. The oligomerization of L-glutamic acid diethyl ester hydrochloride via PS-PEG-DDI immobilized papain in phosphate buffer (pH 8, 200 mM) at 45 °C demonstrated the yield of oligo(γ-ethyl-L-glutamate) reached 78.6 ± 1.2% under the conditions of 2 U/ml of papain, 60 mg/ml L-glutamic acid diethyl ester hydrochloride for 4 h. The immobilization increased the yield by about 40%. The analysis by mass spectrometry (MS) and 1H NMR showed an average degree of polymerization (DPavg) of product was approximately 7–8, identical to that produced using free papain. The biocatalytic activity of the PS-PEG-DDI immobilized papain remained stable after 5 repeated uses, all giving a yield of over 70%. The reduced activation energy of the reaction catalyzed by the PS-PEG-DDI immobilized papain suggests a more favorable active conformation was probably achieved following immobilization.

The within- and between-laboratories reproducibility and predictive capacity of Amino acid Derivative Reactivity Assay using 4 mM test chemical solution: Results of ring study implemented at five participating laboratories.

Amino acid derivative reactivity assay (ADRA) for skin sensitization was adopted as an alternative method in the 2019 OECD Guideline for the Testing of Chemicals (OECD TG 442C). The molar ratio of the nucleophilic reagent to the test chemicals in the reaction solution was set to 1:50. Imamura et al. reported that changing this molar ratio from 1:50 to 1:200 reduced in false negatives and improved prediction accuracy. Hence, a ring study using ADRA with 4mM of a test chemical solution (ADRA, 4 mM) was conducted at five different laboratories to verify within- and between-laboratory reproducibilities (WLR and BLR, respectively). In this study, we investigated the WLR and BLR using 14 test chemicals grouped into three classes: (1) eight proficiency substances, (2) four test chemicals that showed false negatives in the ADRA with 1 mM test chemical solution (ADRA, 1 mM), but correctly positive in ADRA (4 mM), and (3) current positive control (phenylacetaldehyde) and a new additional positive control (squaric acid diethyl ester). The results showed 100% reproducibility and 100% accuracy for skin sensitization. Hence, it is clear that the ADRA (4mM) is an excellent test method in contrast to the currently used ADRA (1mM). We plan to resubmit the ADRA (4mM) test method to the OECD Test Guideline Group in the near future so that OECD TG 442C could be revised for the convenience and benefit of many ADRA users.

Synthesis and anticancer property of two Sm(III) compounds based on tetrazole ligands

Developing new drugs for the treatment of cancer is of great significance. Coordination compounds based on tetrazole-carboxylates are potential candidates for the treatment of cancer. Two metallic compounds coordinated and controlled by bifunctional tetrazolate-carboxylate H3L1 and L2 ligands [H3L1 = N,N-di(2′-carboxymethyl terazole-5-yl) amine and L2 = 2-(5-pyridin-2-yl-tetrazol-2-yl)malonic acid diethyl ester] have been synthesized and characterized by single crystal X-ray diffraction analysis. The [Sm(L1)(H2O)3]·4H2O (1) displayed a 2-D network while [Sm(L2)3(OH)3] (2) with a mononuclear cluster structure. Nanoparticles (NPs) of the two compounds can be prepared by PEG-2000 (Polyethylene glycol-2000) co-precipitation method. In vitro MTT assay on HeLa cells showed that 2 NPs with a lower IC50 (half maximal inhibitory concentration) of only 1.3 μM is lower than that of 1 NPs (1.6 μM), indicating that the higher cytotoxicity of compound 2 NPs. The results showed that [Sm(L1)(H2O)3]·4H2O (1) and [Sm(L2)3(OH)3] (2) NPs were capable of inhibiting cell proliferation in vitro and may be potential candidates against cancer.

Synthesis, Characterization, Crystal structure of 4-(4-Bromo-phenyl)-2,6-dimethyl-1,4-dihydro-pyridine-3,5-dicarboxylic acid diethyl ester: Hirshfeld surface analysis and DFT calculations

The title compound dihydropyridine was synthesized and the structure is established by FT-IR, 1H NMR, and 13C NMR spectral analysis. The SC-XRD analysis has been carried out for the determination of molecular structure and its disclosed that crystal relates to monoclinic crystal phase, P21/n1 space group and cell parameters are a= 10.2314(2), b = 7.5215(1), c = 24.5475(4), α = 90, β = 97.921(1)° γ = 90 with 0.34 x 0.33 x 0.30 crystal size. The crystal lattice exhibits inter-molecular H-bonding between N1—H1A—O1. Further inter contacts of the crystal lattice were determined by 3-D Hirshfeld surface (HSA) as well as the percentage of contributions has been computed through 2-D finger plot depiction. Moreover, bond length, bond angle and torsion angles have been correlated to respective output results of B3LYP/6-311++G(d,p). The electrophilic and nucleophilic characters have been studied through molecular electrostatic potential (MEP) analysis.

Synthesis, crystal structure, DFT calculations and antimicrobial activity of 4-(4-Fluoro-phenyl)-2,6-dimethyl-1,4-dihydro-pyridine-3,5-dicarboxylic acid diethyl ester

The title compound was synthesized and confirmed by FT-IR, 1H, 13C NMR analysis. The molecular structure of the compound was precisely determined by Single Crystal X-ray Diffraction (SC-XRD) analysis. The crystallized compound shows P21/C & monoclinic crystal system with cell parameters a = 9.7768 (5), b = 7.4005(3) and c = 24.8099 (12), β=93.734(2)°.The structural and electronic properties of the compound were carried out by Density Functional Theory (DFT) calculations. The compound exhibited H-bonding between N1-H1A-----O1 with bond distance 2.98(7) A°).The energy gap Egap 4.53eV and Egap= 4.34eV for crystal and DFT method respectively. The molecular orbitals energies were studied through Highest Unoccupied Molecular Orbital (HOMO) and Lowest Unoccupied Molecular Orbital (LUMO) analysis. The softness and hardness of the molecule was studied through Global Chemical Reactivity Descriptors (GCRD). The electrophilic and nucleophilic characters were studied through Molecular Electrostatic Potential (MEP) studies. The anti-microbial studies were carried out by in-vitro method against 6 microorganisms.

Synthesis of functionalized imidazo[4,5-e]thiazolo[3,2-b]triazines by condensation of imidazo[4,5-e]triazinethiones with DMAD or DEAD and rearrangement to imidazo[4,5-e]thiazolo[2,3-c]triazines.

Two series of functionalized imidazothiazolotriazine derivatives were synthesized via the condensation of imidazo[4,5-e]-1,2,4-triazine-3-thiones with acetylenedicarboxylic acid dimethyl and diethyl esters (DMAD and DEAD) and subsequent base-catalyzed rearrangement of the obtained imidazo[4,5-e]thiazolo[3,2-b]-1,2,4-triazines into regioisomeric imidazo[4,5-e]thiazolo[2,3-c]-1,2,4-triazine derivatives.