Wall Acetabular Fractures Research Articles

Anatomical Posterior Acetabular Plate Versus Conventional Reconstruction Plates for Acetabular Posterior Wall Fractures: A Comparative Study.

Background: Functional recovery following the surgical fixation of acetabular posterior wall fractures remains a challenge. This study compares outcomes of posterior wall fracture reconstruction using an anatomical posterior acetabular plate (APAP) versus conventional reconstruction plates. Methods: Forty patients with acetabular fractures involving the posterior wall or column underwent surgery, with 20 treated using APAPs (APAP group) and 20 with conventional pelvic reconstruction plates (control group). Baseline patient characteristics, intraoperative blood loss and time, reduction quality, postoperative function, and postoperative complications were compared using appropriate non-parametric statistical tests. A general linear model for repeated measures analysis of variance was employed to analyze trends in functional recovery. Results: No significant differences were observed in baseline characteristics. APAP significantly reduced surgical time by 40 min (186.5 ± 51.0 versus 225.0 ± 47.7, p =0.004) and blood loss (695 ± 393 versus 930 ± 609, p = 0.049) compared to conventional plates. At 3 and 6 months following surgery, the APAP group exhibited higher functional scores (modified Merle d'Aubigné scores 10 ± 1.8 versus 7.8 ± 1.4, p < 0.001; 13.4 ± 2.8 versus 10.1 ± 2.1, p = 0.001), converging with the control group by 12 months (modified Merle d'Aubigné scores 14.2 ± 2.6 versus 12.7 ± 2.6, p = 0.072; OHS 31.6 ± 12.3 versus 30.3 ± 10.1, p = 0.398). Radiologically, the APAP group demonstrated superior outcomes (p = 0.047). Complication and conversion rates to hip arthroplasty did not significantly differ between groups (10% versus 15%, p = 0.633). Conclusions: The use of an APAP in reconstructing the posterior acetabulum significantly reduces surgical time, decreases intraoperative blood loss, and leads to earlier functional recovery compared to conventional reconstruction plates. The APAP provides stable fixation of the posterior wall and ensures the durable maintenance of reduction, ultimately yielding favorable surgical outcomes.

Analysis of the therapeutic effect of trochanteric flip osteotomy combined with Kocher-Langenbeck approach for high acetabular posterior wall fracture

Evaluation of the clinical efficacy of f trochanteric flip osteotomy combined with Kocher-Langenbeck approach for high acetabular posterior wall fracture. Between January 2020 and December 2022, 20 patients with high acetabular posterior wall fractures were retrospectively analyzed, including 12 males and 8 females, aged 18 to 75 years old. They were divided into two groups according to the different surgical methods. Ten patients were treated with greater trochanteric osteotomy combined with Kocher-Langenbeck approach as the observation group, including 5 males and 5 females, aged from 18 to 75 years old. Ten patients were treated with Kocher-Langenbeck approach alone as the control group, including 7 males and 3 females, aged from 18 to 71 years old. Matta reduction criteria were used to evaluate the reduction quality of the two groups, and Harris score was used to compare the hip function of the two groups at the latest follow-up. The operation time, blood loss and postoperative complications of the two groups were analyzed. All patients were followed up for 10 to 24 months. According to the Matta fracture reduction quality evaluation criteria, the observation group achieved anatomical reduction in 6 cases, satisfactory reduction in 3 cases, and unsatisfactory reduction in 1 case, while the control group only achieved anatomical reduction in 3 cases, satisfactory reduction in 3 cases, and unsatisfactory reduction in 4 cases. At the final follow-up, the Harris hip score ranged from 71.4 to 96.6 in the observation group and 65.3 to 94.5 in the control group. According to the results of Harris score. The hip joint function of the observation group was excellent in 6 cases, good in 3 cases, and fair in 1 case. The hip joint function of the control group was excellent in 2 cases, good in 3 cases, fair in 3 cases, and poor in 2 cases. In the observation group, the intraoperative blood loss ranged from 300 to 700 ml, and the operation duration ranged from 120 to 180 min;in the control group, the intraoperative blood loss ranged from 300 to 650 ml, and the operation duration ranged from 100 to 180 min. Complications in the observation group included 1 case of traumatic arthritis and 1 case of heterotopic ossification, while complications in the control group included 3 cases of traumatic arthritis, 3 cases of heterotopic ossification and 1 case of hip abduction weakness. Trochanteric flip osteotomy combined with the Kocher-Langenbeck approach significantly improved anatomical fracture reduction rates, enhanced excellent and good hip joint function outcomes, and reduced surgical complication incidence compared to the Kocher-Langenbeck approach alone. Clinical application of this combined approach is promising, although larger studies are needed for further validation.

Surgical treatment outcomes of acetabular posterior wall and posterior column fractures using 3D printing technology and individualized custom-made metal plates: a retrospective study

BackgroundFractures involving the posterior acetabulum with its rich vascular and neural supply present challenges in trauma orthopedics. This study evaluates the effectiveness of 3D printing technology with the use of custom-made metal plates in the treatment of posterior wall and column acetabular fractures.MethodsA retrospective analysis included 31 patients undergoing surgical fixation for posterior wall and column fractures of the acetabulum (16 in the 3D printing group, utilizing 3D printing for a 1:1 pelvic model and custom-made plates based on preoperative simulation; 15 in the traditional group, using conventional methods). Surgical and instrument operation times, intraoperative fluoroscopy frequency, intraoperative blood loss, fracture reduction quality, fracture healing time, preoperative and 12-month postoperative pain scores (Numeric Rating Scale, NRS), hip joint function at 6 and 12 months (Harris scores), and complications were compared.ResultsThe surgical and instrument operation times were significantly shorter in the 3D printing group (p < 0.001). The 3D printing group exhibited significantly lower intraoperative fluoroscopy frequency and blood loss (p = 0.001 and p < 0.001, respectively). No significant differences were observed between the two groups in terms of fracture reduction quality, fracture healing time, preoperative pain scores (NRS scores), and 6-month hip joint function (Harris scores) (p > 0.05). However, at 12 months, hip joint function and pain scores were significantly better in the 3D printing group (p < 0.05). Although the incidence of complications was lower in the 3D printing group (18.8% vs. 33.3%), the difference did not reach statistical significance (p = 0.433).ConclusionCombining 3D printing with individualized custom-made metal plates for acetabular posterior wall and column fractures reduces surgery and instrument time, minimizes intraoperative procedures and blood loss, enhancing long-term hip joint function recovery.Clinical Trial Registration12/04/2023;Trial Registration No. ChiCTR2300070438; http://www.chictr.org.cn.

Dislocation Does Not Seem To Be an Absolute Factor Effecting the Short- to Medium-Term Poor Prognosis of Patients with Acetabular Posterior Wall Fracture.

Dislocation is a complication of acetabular fractures involving the posterior wall, but whether dislocation is an absolute factor impacting the short- to medium-term prognosis of the hip joint remains controversial. This study aimed to compare the short- to medium-term clinical and radiological results among patients diagnosed with an acetabular fracture involving the posterior wall, with or without dislocation.Seventy-nine patients diagnosed with an acetabular fracture involving the posterior wall were retrospectively divided into posterior dislocation and non-dislocation groups. All fractures were open reduction + internal fixation with a plate screw combination through the single Kocher-Langenbeck approach. The short- to medium-term radiographic outcomes of follow-up were evaluated using the Matta radiologic grading system, while the clinical outcomes were evaluated using the modified Merle d'Aubigné-Postel evaluation system.The mean follow-up duration for all patients was 43.90 (range 24-75) months. Both groups achieved similar short- to medium-term clinical and radiographic results. There seems to be no significant differences between the two groups regarding the short- to medium-term assessment of clinical and radiographic results and the occurrence of postoperative complications (p>0.05).In patients with acetabular fractures involving the posterior wall, hip dislocation is probably not an absolute determinant of a poor outcome. Even with early reduction, the short- to medium-term prognosis results appear similar to those of patients without dislocation.

Virtual preoperative planning and 3D-printed templates for pre-contoured plates in treatment of acetabular posterior wall fractures

To evaluate the feasibility and accuracy of virtual preoperative planning and 3D-printed templates for pre-contoured plates for the treatment of posterior wall fractures of the acetabulum. A retrospective analysis of 29 patients with posterior acetabular wall fractures treated between August 2017 and March 2021 were divided into 2 groups based on whether to use preoperative virtual planning and 3D printed template. In 3D-printing group, there were 14 patients, including 10 males and 4 females； aged from 21 to 53 years old；CT-based virtual surgical planning was done using Mimics and 3-Matic software and 3D-printed templates for pre-contoured plates were adopted. In conventional group, there were 15 patients, including 10 males and 5 females；aged from 19 to 55 years old；conventional method of intra-operative contouring to adapt the plate to the fracture region was adopted. Blood loss, surgical time, radiographic quality of reduction, and hip function were compared between groups. The difference in operation time and intraoperative blood loss was significant（P<0.05）. Twenty-three patients were followed up from 12 to 30 months, and the fractures in both groups healed with a healing time of 3 to 6 months. At the last follow-up, the Merle d'Aubign-Postel score of the 3D printed group was lower than that of the conventional group（P<0.05）, with no significant differences in walking ability, hip mobility and total score（P>0.05）. In 3D printing group, 6 cases were excellent, 5 cases were good, 3 cases were fair；in conventional group, 5 cases were excellent, 5 cases were good, 4 cases were fair, 1 case was worse；no significant difference between two groups（P>0.05）. Virtual preoperative planning and 3D-printed templates for pre-contoured plates can reduce operative time and the blood loss of surgery, improve the quality of reduction. This method is efficient, accurate and reliable to treat acetabular posterior wall fractures.

3D printing-assisted total hip arthroplasty and internal fixation for the treatment of fresh acetabular fracture and femoral head necrosis: A case report

Rationale: Posterior wall comminuted fractures of the acetabulum are typically caused by high-energy trauma, and the complex anatomical structure of the acetabulum makes their treatment challenging. However, reports of the treatment of fresh acetabular fractures combined with femoral head necrosis are extremely rare. Patient concerns: A 57-year-old male, injured in a car accident, presented with right hip pain and limited mobility. At the age of 50, the patient was diagnosed with avascular necrosis of the right femoral head, experiencing right hip pain and a limp while walking, for which conservative treatment was initiated. Diagnosis: The patient was clinically diagnosed with fresh comminuted posterior wall acetabular fracture and late-stage femoral head necrosis. Interventions: We applied 3D printing technology and computer-assisted virtual surgical techniques for preoperative planning, simulated fracture reduction, and designed personalized bone plates and screws for fixation of the posterior wall of the acetabulum. A single-stage total hip arthroplasty was performed to treat femoral head necrosis. Outcomes: He began walking with the assistance of a walker 1 month after surgery, and at 6 months post-surgery, the acetabular posterior wall fracture had effectively healed, allowing the patient to return to work. Lessons: The application of 3D printing technology in acetabular internal fixation and total hip arthroplasty is helpful for fracture assessment, facilitates smooth surgery, promotes fracture reduction and healing, restores hip joint function, and ensures a high level of safety.

Outcomes of spring-locking plate fixation method using locking mesh plate/box plate for posterior wall fractures of the acetabulum: a retrospective single-centre study

IntroductionThis retrospective study evaluated the outcomes of variable-angle locking compression plate, mesh plate, or footplate box fixation for posterior acetabular wall fractures. Patients and methodsThe study included nine patients with unstable posterior acetabular wall fractures who underwent internal fixation with the "spring-locking plate fixation method" between January 2015 and December 2019. Patient demographics, fracture classifications, surgical details, radiological and clinical evaluations, and complications were collected from electronic medical records. Statistical analyses were performed to assess the relationship between preoperative and postoperative dislocations. ResultsThe mean age of the patients was 46 years, and the majority were men (88.9%). Fracture types included posterior wall fractures and posterior column plus posterior wall fractures. The mean operative time was 246 min and the mean blood loss was 663 mL. The surgical approaches included the Kocher–Langenbeck, Ganz trochanteric flip, and transtrochanteric approaches. Variable-angle locking compression plate mesh plates and footplate box type implants were used for fixation. The mean preoperative dislocation was 23 mm, which was significantly reduced to 1 mm immediately post-operation and at the final observation. The bone fusion rate was 100% and radiological and clinical evaluations revealed favourable outcomes. Complications were minimal, with mild heterotopic ossification observed in four patients. ConclusionThe spring-locking plate fixation method demonstrated satisfactory outcomes for the treatment of posterior acetabular wall fractures. This technique provides rigid fixation. Furthermore, the use of variable-angle locking screws minimizes the risk of intra-articular perforations. Despite limitations such as a small sample size and the absence of a control group, the results suggest that the spring-locking plate fixation method may be valuable in managing these fractures.

Treatment of Acetabulum Anterior Wall Fractures Using the Modified Stoppa Approach.

Introduction The objective of this study was to describe the modified Stoppa approach for anterior wall fracture fixation and to present our radiological and functional results of this approach. Materials and methods Between April 2013 and December 2019, 256 acetabular fractures operated with the modified Stoppa approach in our clinic were retrospectively reviewed, and 11 patients who were operated for anterior acetabular wall fractures with at least two years of follow-up were included in the study. Results The median amount of bleeding during surgery was found to be 450 ml (200-800), and the median operation time was 120 minutes (90-180). The modified Merle d'Aubigné and Postel Hip Score (MDS), modified Harris Hip Score (HHS), Matta's Reduction Criteria (MRC), and Kellgren-Lawrence Classification (KLC) outcomes are similar to the anterior surgical approach. Conclusion We suggest that the modified Stoppa approach can be safely used in the surgical treatment of isolated anterior acetabular fractures due to its short operative duration, low amount of bleeding, low complication rate, and favorable radiological and clinical results. The modified Stoppa procedure is a considerable alternative to the ilioinguinal approach in anterior acetabular fractures.

The Association between Hip Joint Morphology and Posterior Wall Fracture: Analysis of Radiologic Parameters in Computed Tomography.

Although numerous radiologic parameters of abnormal hip joint morphology are utilized in practice, studies on the relation of these parameters to acetabular fractures are limited. This study hypothesized that certain morphological features of hip joints are associated with acetabular posterior wall (PW) fracture patterns and aimed to identify morphological characteristics predictive of acetabular PW fracture. The records of 107 consecutive patients, who were diagnosed with acetabular fractures in a level I trauma center from August 2017 to April 2021, were initially reviewed. After excluding patients who lacked proper radiographic evaluation and had previous surgery or concomitant injury on the ipsilateral lower limb, a total of 99 patients were analyzed to investigate the morphological characteristics of the hip joint, measured in computed tomography, associated with acetabular posterior wall fracture. We included patient demographics, acetabular index (AI), sharp angle, acetabular depth-to-width ratio (AD/WR), center-edge angle (CEA), head-neck offset ratio (HNOR), acetabular head index (AHI), anterior acetabular sector angle (AASA), posterior acetabular sector angle (PASA), and acetabular version angle (AVA) in the univariate and multivariate analyses. The injury mechanism (p = 0.001) and AD/WR (p = 0.021) were predictors of PW fracture in the univariate analysis. In the multivariable analysis, injury mechanism (p = 0.011), AI (coefficient B = 0.320; Exp (B) = 1.377; p = 0.017), and AD/WR (coefficient B = 33.047; Exp (B) = 2.250 × 1014; p = 0.028) were significant predictors of PW fracture. This study highlights the importance of morphological factors, such as a larger AI and AD/WR, that may influence joint stress distribution, resulting in acetabular PW fracture. Understanding these pathomechanisms may protect the hip joint and prevent future injuries through the early identification and treatment of pathological conditions.

Standard versus low-dose computed tomography for assessment of acetabular fracture reduction using novel step and gap measurement technique

PurposeQuality of reduction is of paramount importance after acetabular fracture and is best assessed on computed tomography (CT). A recently proposed measurement technique for assessment of step and gap displacement is reproducible but has not been validated. The purpose of this study is to validate a well-established measurement technique against known displacements and to determine if it can be used with low dose CT.MethodsPosterior wall acetabular fractures were created in 8 cadaveric hips and fixed at known step and gap displacements. CT was performed at multiple radiation doses for each hip. Four surgeons measured step and gap displacement for each hip at all doses, and the measurements were compared to known values.ResultsThere were no significant differences in measurements across surgeons, and all measurements were found to have positive agreement. Measurement error < 1.5 mm was present in 58% of gap measurements and 46% of step measurements. Only for step measurements at a dose of 120 kVp did we observe a statistically significant measurement error. There was a significant difference in step measurements made by those with greater and those with fewer years in practice.ConclusionOur study suggests this technique is valid and accurate across all doses. This is important as it may reduce the amount of radiation exposure for patients with acetabular fractures.

Finite element analysis of posterior acetabular column plate and posterior acetabular wall prostheses in treating posterior acetabular fractures

BackgroundThe purpose of this study was to investigate the mechanical stability of the posterior acetabular column plate and different posterior acetabular wall prostheses used in treating posterior acetabular fractures with or without comminution.MethodsThe unilateral normal ilium was reconstructed, and a model of posterior acetabular wall fracture was established on this basis. The fracture fragment accounted for approximately 40% of the posterior acetabular wall. The posterior acetabular column plate and different posterior acetabular wall prostheses were also designed. Using static and dynamic analysis methods, we observed and compared the changes in the stress and displacement values of different models at different hip joint flexion angles under external forces.ResultsAt different hip flexion angles, the stress of each model mainly fluctuated between 37.98 MPa and 1129.00 MPa, and the displacement mainly fluctuated between 0.076 and 6.955 mm. In the dynamic analysis, the nodal stress‒time curves of the models were nonlinear, and the stress changed sharply during the action time. Most of the nodal displacement‒time curves of the models were relatively smooth, with no dramatic changes in displacement during the action time; additionally, most of the curves were relatively consistent in shape.ConclusionsFor simple posterior acetabular wall fractures, we recommend using a posterior acetabular column plate. In the case of comminuted posterior acetabular fractures, we recommend the use of a nonflanked posterior acetabular prosthesis or a biflanked posterior acetabular prosthesis. Regarding the method of acetabular prosthesis design, we propose the concept of “Break up to Make up” as a guide.

Arthroscopic Reduction and Internal Fixation in Patients with Acetabular Posterior Wall Fractures.

This study aimed to access the radiologic and clinical outcomes after arthroscopic reduction and internal fixation with screws in patients with posterior wall fractures of the acetabulum. From May 2013 to December 2019, 13 patients (11 men and 2 women) with posterior wall fractures of the acetabulum were treated with arthroscopic reduction and internal fixation with screws at two medical centers. The mean age at the index operation was 39 years (range, 22-58 years). The mean duration of follow-up was 23 months (range, 12-46 months). Clinical assessment was performed using the modified Merle d'Aubigné and Postel functional scoring system. The maximum displacement of acetabular or femoral head fragments detected on radiographs was used as radiographic results. Secondary osteoarthritis, osteonecrosis, or heterotrophic ossification was assessed at the latest follow-up. Bony union was shown at 12 weeks of follow-up in all patients. The radiologic outcomes showed an anatomical reduction in 11 patients and a satisfactory reduction in 2 patients. The modified Merle d'Aubigné and Postel functional score was excellent in 7 patients, good in 5 patients, and fair in 1 patient. Two patients had transient pudendal nerve palsy after hip arthroscopy. However, no sciatic nerve palsy occurred. At the latest follow-up, there was no heterotopic ossification, osteonecrosis of the femoral head, or posttraumatic osteoarthritis. Arthroscopic reduction and internal fixation with cannulated screws can be good alternative options with good radiographic and clinical outcomes, convenient removal of intra-articular loose body, and low complication rates.

髋臼后壁骨折内固定方式的选择

髋臼后壁骨折内固定方式的选择

A simple method for calculating acetabular posterior wall fracture fragment percentages on three-dimensional computed tomography scan reconstruction images

A simple method for calculating acetabular posterior wall fracture fragment percentages on three-dimensional computed tomography scan reconstruction images

A retrospective analysis of different treatments of posterior acetabular wall fracture

Introduction/Objective. The objective of the paper is an analysis of clinical outcomes of non-surgical conservative and operative management of patients with posterior acetabular wall fractures. Methods. We investigated 88 fractures of the acetabular joint, 31 of which were treated surgically and 57 non-surgically. Only screws or reconstruction plates and screws were used for surgical treatment and traction in patients who underwent nonsurgical treatment. The study period lasted at least three years. The measures used to assess the outcome of operative, surgical and non-operative, conservative approach were Merle d?Aubigne modified score, Harris hip score, and Matta?s radiometric criteria. Results. Matta?s evaluation criteria showed an excellent score of 40.4% in conservatively treated patients; 19.4% in patients who underwent surgery; a good score of 49.1% in conservatively treated patients; and 48.4% in patients who underwent surgery. Comparation between two patient groups differently treated, by Merle d?Aubigne tool, showed excellent results for 56.1% conservatively treated patients and 25.8% in those patients who underwent surgery, and good results in 29.8% conservatively treated patients and 38.7% in patients who underwent surgery. Harris hip score (excellent results were showed in 54.4% for non-operative-treated patients) also showed statistical significance, p &lt; 0.005. Conclusion. Proper diagnostics and a proper definitive diagnosis can help avoid surgical treatment if the fracture cannot be treated surgically, making the postoperative period more comfortable for the patient.

Comparison of clinical efficacy of subchondral blocking technique combined with plate-screw biplanar fixation and simple plate-screw support peripheral block fixation in the treatment of complex posterior wall acetabular fracture

To investigate the clinical effect of subchondral blocking technique combined with plate and screw biplane fixation in the treatment of complex acetabular posterior wall fractures. From July 2015 to December 2019, a total of 47 cases of acetabular posterior wall fractures were treated. According to the different internal fixation techniques, they were divided into the external blocking fixation group supported by lateral plate and screw(control group of 23 cases) and the subchondral blocking technique combined with lateral plate and screw support biplane fixation group(study group of 24 cases). In the control group, there were 15 males and 8 females, aged 18 to 68 years old with an average of (40.9±7.2) years;preoperative preparation was 4 to 13 days with an average of (7.9±1.5) days. In the study group, there were 14 males and 10 females, aged 20 to 71 years old with an average of (41.7±7.9) years;preoperative preparation was 4 to 12 days with an average of (7.5±1.9) days. Kocher-Langenbeck approach was used in both groups and all patients were followed up for at least 1 year. The operation time, intraoperative blood loss, hospitalization time, quality of fracture reduction after operation, modified Merle D'Aubigne Postel score of hip joint one year after operation and postoperative complication rate of two groups were statistically analyzed and compared. The patients in both groups were followed up for at least 1 year. One year after operation, the Merled'Aubigne Postel score(16.042±1.517) of hip function improvement in the study group was significantly higher than that in the control group (14.696±1.222)(P<0.05). There was no significant difference in operation time and intraoperative bleeding between the two groups(P>0.05). One year after operation, there was a significant difference between two groups in the evaluation results of Matta fracture reduction quality(P<0.05). There was no significant difference in postoperative complications between two groups(P>0.05). The treatment of complex acetabular posterior wall fracture with subchondral blocking technique combined with plate and screw biplane fixation technique has lower postoperative complication rate, better functional recovery of hip joint and satisfactory clinical effect.

Posterior acetabular wall morphology is an independent risk factor that affects the occurrence of acetabular wall fracture in patients with traumatic, posterior hip dislocation

PurposeSmaller posterior acetabular walls have been shown to independently influence the risk for bipolar hip dislocation. We asked whether differences would also be observed in patients with traumatic posterior hip dislocation with and without posterior wall fractures.MethodsBetween 2012 and 2020 we observed 67 traumatic posterior hip dislocations. Of these, 43 traumatic posterior hip dislocations in 41 patients met the inclusion criteria. Eighteen dislocations were excluded with an acetabular fracture other than posterior wall fracture and six dislocations had insufficient computed tomography (CT) data. The mean age was 41 ± 11 years, 32 males and nine females. We observed 26 traumatic hip dislocations with posterior wall fractures and 17 without. All patients underwent polytrauma CT scans and postoperative/postinterventional pelvic CT scans. On axial CT-scans, posterior wall determining angles were measured.ResultsPatients with posterior wall fractures were not significantly older than patients without posterior wall fractures (42 ± 12 vs. 38 ± 10 years; p = 0.17). Patients without posterior wall fractures had significantly smaller posterior acetabular sector angles (84° ± 10°) than did patients with posterior wall fractures (105° ± 12°) (p < 0.01; OR 1.178). Likewise, the posterior wall angle was significantly smaller in patients without posterior wall fracture (62° ± 9°) than in those with posterior wall fractures (71° ± 8°) (p < 0.01; OR 1.141).ConclusionBoth posterior acetabular sector angle and posterior wall angle are independent factors determining the posterior wall fracture morphology in patients with traumatic posterior hip dislocation. Age and the observed trauma mechanism did not differentiate between traumatic posterior hip dislocations with and without posterior wall fractures.

A Novel Anatomical Locking Guide Plate for Treating Acetabular Transverse Posterior Wall Fracture: A Finite Element Analysis Study.

ObjectiveTo improve the treatment of the acetabular transverse posterior wall fracture (ATPWF), a novel anatomical locking guidance plate (NALGP) was designed and compared with traditional fixations using finite element analysis.MethodsThe ATPWF model was constructed using the three‐dimensional finite element model of the half pelvis via the Mimics software and three internal devices were used to fix this model: the posterior‐column locking plate with anterior‐column screws (PCLP), double‐column locking plates (DCLP), and NALGP. Next, mesh division was conducted by solid 187 tetrahedral elements in the workbench software. After defining the boundary condition and material properties, each assembly model was loaded in an increasing manner with a downward vertical force of 200, 400, and 600 N, respectively. The loading force was directed at 45 degrees upward in the coronal plane and 25 degrees backward in the sagittal plane. Finally, the stress distribution and stress peak of plates and screws were measured and evaluated, and the displacement of fracture fragments under different loading force was assessed among the three groups.ResultsFor stress distribution, it was found that the stress mainly acted on the posterior‐column plate, especially concentrated at the middle and lower section of the plate in all three groups after fixation on the ATPWF. In addition, most stresses of screws appeared on the lag screws instead of the common screws. The common screws in the NALGP group experienced larger stresses under all loading force, while those in the DCLP group withstood less stresses compared to those in the PCLP group. For the displacement of fracture fragments, the NALGP group were found to have less fracture fragment displacements than the PCLP group, but had comparable results to DCLP at both the transverse fracture and the posterior wall fracture sites.ConclusionThe newly‐designed fixation device showed superiorities on fracture stabilization over PCLP, but had comparable stability to DCLP. This suggests that the DCLP might be unnecessary for treating ATPWF in some instances because it might cause bigger surgical trauma and blood loss.

Are screws enough? functional outcome in surgically treated posterior acetabular wall fracture using cannulated cancellous screws

Background: Posterior wall fractures of acetabulum are the commonest type of acetabular fractures 1,2. These fractures are usually associated with posterior dislocation of hip. Anatomical reduction and fixation are important to restore congruity and stability of joint, to decrease the risk of secondary arthritis and thus attain good functional outcome 3. Fixation modalities comprise of both recon plates in buttress mode, lag screw fixation or combination of both.In our study, we aimed to assess the functional outcome and complications following the use of only cannulated screws as fixation mo Material and methods: A total of 11 patients with a diagnosis of posterior acetabular wall fracture were treated with surgical fixation of posterior acetabular wall using only cannulated cancellous screws. The patients were followed up strictly for 6 weeks, 3 months, 6 months, as well as 1 year and thereafter at yearly intervals as long as possible. Functional and radiological assessment were done using Merle D’Aubigne and Postel grading system and Matta’s radiological criteria. Result:In our study, we noticed excellent outcome in 100% of the patients who had posterior wall fractures without hip dislocation.

Posterior wall fractures of the acetabulum: treatment using an anatomical plate through direct posterior approach.

This study was aimed to measure the application of W-shaped acetabular angular plate (WAAP) through direct posterior approach (DPA) on the reconstruction of acetabular posterior wall fractures when compared with reconstruction plates. A retrospective study was performed on patients treated with the WAAP or reconstruction plates via the DPA. The intraoperative data of operative time, blood loss and radiation exposure times were recorded. Radiographs of the pelvis and CT scan were obtained within one week post-operation to assess the reduction quality. The clinical outcome was evaluated by the modified Merle d'Aubigne and Postel score. From May 2016 to October 2019, a total of 41 patients with simple acetabular posterior wall fractures were included in this study, 22 from the WAAP group and 19 from the reconstruction plates group. There were no significant differences between the two group in age, gender, time from injury to operation, cause of injuries, length of incision and follow-up time (P > 0.05). In comparison with the reconstruction plates group, the average operation time of the WAAP group was significantly shorter (46.1 ± 12.7min vs 59.2 ± 17.4min, P < 0.05), the average radiation exposure times were significantly less (2.3 ± 0.6 vs 3.6 ± 1.0, P < 0.001), the average blood loss was significantly less (240 ± 98.9ml vs 301.1 ± 66.6ml, P < 0.05). According to Matta radiology criteria and the modified Merle d' Aubigne and Postel score, no significant difference was observed between the two group, as for the quality of reduction and function outcomes. The application of WAAP through DPA showed satisfactory preliminary clinical outcomes, showing promise to be an alternative technique for the treatment of acetabular posterior wall fractures.