Acceptors For Organic Solar Cells Research Articles

An Asymmetric Coumarin-Anthracene Conjugate as Efficient Fullerene-Free Acceptor for Organic Solar Cells.

Asymmetric wide-bandgap fullerene-free acceptors (FFAs) play a crucial role in organic solar cells (OSCs). Here, we designed and synthesized a simple asymmetric coumarin-anthracene conjugate named CA-CN with optical bandgap of 2.1 eV in a single-step condensation reaction. Single crystal X-ray structure analysis confirms various multiple intermolecular non-covalent interactions. The molecular orbital energy levels of CA-CN estimated from cyclic voltammetry were found to be suitable for its use as an acceptor for OSCs. Binary OSCs fabricated using CA-CN as acceptor and PTB7-Th as the donor achieve a power conversion efficiency (PCE) of 11.13%. We further demonstrate that the insertion of 20 wt% of CA-CN as a third component in ternary OSCs with PTB7-Th:DICTF as the host material achieved an impressive PCE of 14.91%, an improvement of ~43% compared to the PTB7-Th:DICTF binary device (10.38%). Importantly, the ternary blend enhances the absorption coverage from 400 to 800 nm and improves the morphology of the active layer. The findings highlight the efficacy of an asymmetric design approach for FFAs, which paves the way for developing high-efficiency OSCs at low cost.

An Asymmetric Coumarin‐Anthracene Conjugate as Efficient Fullerene‐Free Acceptor for Organic Solar Cells

Asymmetric wide‐bandgap fullerene‐free acceptors (FFAs) play a crucial role in organic solar cells (OSCs). Here, we designed and synthesized a simple asymmetric coumarin‐anthracene conjugate named CA‐CN with optical bandgap of 2.1 eV in a single‐step condensation reaction. Single crystal X‐ray structure analysis confirms various multiple intermolecular non‐covalent interactions. The molecular orbital energy levels of CA‐CN estimated from cyclic voltammetry were found to be suitable for its use as an acceptor for OSCs. Binary OSCs fabricated using CA‐CN as acceptor and PTB7‐Th as the donor achieve a power conversion efficiency (PCE) of 11.13%. We further demonstrate that the insertion of 20 wt% of CA‐CN as a third component in ternary OSCs with PTB7‐Th:DICTF as the host material achieved an impressive PCE of 14.91%, an improvement of ~43% compared to the PTB7‐Th:DICTF binary device (10.38%). Importantly, the ternary blend enhances the absorption coverage from 400 to 800 nm and improves the morphology of the active layer. The findings highlight the efficacy of an asymmetric design approach for FFAs, which paves the way for developing high‐efficiency OSCs at low cost.

A 6-Arm Three-Blade Propeller Electron Acceptor for Organic Solar Cells with Efficiency over 19%

A 6-Arm Three-Blade Propeller Electron Acceptor for Organic Solar Cells with Efficiency over 19%

Recent Advances of Imide‐Functionalized Polymer Donors for Non‐fullerene Solar Cells†

Comprehensive SummaryIn recent years, there has been a shift towards using non‐fullerene electron acceptors in organic solar cells (OSCs) as a replacement for fullerene derivatives. This change requires polymer donors that possess compatible physical properties, such as absorption range, HOMO energy level, miscibility, and crystallinity. Moreover, the high cost and poor batch‐to‐batch reproducibility of polymer donors also hinder future large‐scale manufacturing. These emphasize the need to explore alternative types of polymer donors. The imide‐functionalized building units possess several key attributes that make their polymers highly promising for non‐fullerene OSCs. These attributes include ease of synthesis, strong electron‐withdrawing ability, rigid and co‐planar structure, and the ability to easily tune solubility through imide side chains. In this review, we summarized the synthetic routes of imide building units, and the structural evolution of imide‐functionalized polymer donors by focusing on the effects of polymer structure on their physical, optoelectronic, and photovoltaic properties. We hope that this mini‐review will serve as a catalyst for future research on imide‐functionalized polymers toward high‐performance, cost‐effective, and durable organic solar cells (OSCs).

Exploring structure-property landscape of non-fullerene acceptors for organic solar cells.

We present a comprehensive analysis of the structure-property relationship in small molecule non-fullerene acceptors (NFAs) featuring an acceptor-donor-acceptor configuration employing state-of-the-art quantum chemical computational methods. Our focus lies in the strategic functionalization of halogen groups at the terminal positions of NFAs as an effective means to mitigate non-radiative voltage losses and augment photovoltaic and photophysical properties relevant to organic solar cells. Through photophysical studies, we observe a bathochromic shift in the visible region for all halogen-functionalized NFAs, except type-2, compared to the unmodified compound. Most of these functionalized compounds exhibit exciton binding energies below 0.3eV and ΔLUMO less than 0.3eV, indicating their potential as promising candidates for organic solar cells. Selected candidate structures undergo an analysis of charge transport properties using the semi-classical Marcus theory based on hopping transport formalism. Molecular dynamics simulations followed by charge transport simulations reveal an ambipolar nature of charge transport in the investigated NFAs, with equivalent hole and electron mobilities compared to the parent compound. Our findings underscore the crucial role of end-group functionalization in enhancing the photovoltaic and photophysical characteristics of NFAs, ultimately improving the overall performance of organic solar cells. This study advances our understanding of the structure-property relationships in NFAs and provides valuable insights into the design and optimization of organic solar cell materials.

Optimizing Molecular Crystallinity and Suppressing Electron-Phonon Coupling in Completely Non-Fused Ring Electron Acceptors for Organic Solar Cells.

High open-circuit voltage (Voc) organic solar cells (OSCs) have received increasing attention because of their promising application in tandem devices and indoor photovoltaics. However, the lack of a precise correlation between molecular structure and stacking behaviors of wide band gap electron acceptors has greatly limited its development. Here, we adopted an asymmetric halogenation strategy (AHS) and synthesized two completely non-fused ring electron acceptors (NFREAs), HF-BTA33 and HCl-BTA33. The results show that AHS significantly enhances the molecular dipoles and suppresses electron-phonon coupling, resulting in enhanced intramolecular/intermolecular interactions and decreased nonradiative decay. As a result, PTQ10 : HF-BTA33 realizes a power conversion efficiency (PCE) of 11.42 % with a Voc of 1.232 V, higher than that of symmetric analogue F-BTA33 (PCE=10.02 %, Voc=1.197 V). Notably, PTQ10 : HCl-BTA33 achieves the highest PCE of 12.54 % with a Voc of 1.201 V due to the long-range ordered π-π packing and enhanced surface electrostatic interactions thereby facilitating exciton dissociation and charge transport. This work not only proves that asymmetric halogenation of completely NFREAs is a simple and effective strategy for achieving both high PCE and Voc, but also provides deeper insights for the precise molecular design of low cost completely NFREAs.

Chemical library generation of polymer acceptors for organic solar cells with higher electron affinity

In this study, an intricate machine learning assisted framework is introduced for the designing of polymer acceptors. Machine learning (ML) models are trained to predict the electron affinity of polymers. Ten thousand new polymers are generated using the Breaking Retrosynthetically Interesting Chemical Substructures (BRICS) method and their electron affinity values are predicted using a pre-trained ML model. The selection of polymers is based on electron affinity, retaining those with higher electron affinity. The synthetic accessibility of the selected polymers is evaluated. Additionally, the structural similarity among the selected polymers is examined; results are indicating higher similarity between selected compounds. By efficiently identifying and optimizing new polymers, the approaches developed significantly enhance the likelihood of discovering superior materials for advanced applications.

Isothianaphthene quinoids: pyrazine-annelated structures for tuning electronic properties

Abstract The development of quinoidal systems with extended π-conjugation has elucidated the influence that diradical characteristics exert on structure–property relationships, which is significant because it broadens the possibilities for the use of organic semiconducting materials in organic electronics. However, the chain-length elongation of such quinoidal molecules has resulted in low chemical stability due to the large contribution of diradical characteristics and to the high level of the highest occupied molecular orbital (HOMO), both of which limit the synthesis of π-extended quinoidal molecules. Here, we describe solving this problem via aromatic stabilization. To accomplish this, we designed a system that utilizes electron-accepting pyrazine-fused thieno[3,4-b]pyrazine following the development of the isothianaphthene quinoids of thiophene 3-mer and 6-mer. Theoretical calculations indicate that the introduction of a pyrazine-annelated structure suppresses the diradical characteristics and stabilizes the HOMO energy level of quinoidal oligothiophenes. The thermal, photophysical, and physicochemical properties of newly synthesized quinoidal molecules with full annelation of the benzene and pyrazine rings were investigated. Quinoidal thiophene 3-mer functioned as an acceptor in organic solar cells with a power conversion efficiency of 1.04%. This study demonstrates that the introduction of pyrazine-fused rings is an effective molecular design to extend the chain length of quinoidal oligothiophenes.

What is the Limit Size of 2D Conjugated Extension on Central Units of Small Molecular Acceptors in Organic Solar Cells?

2D conjugated extension on central units of small molecular acceptors (SMAs) has gained great successes in reaching the state-of-the-art organic photovoltaics. Whereas the limit size of 2D central planes and their dominant role in constructing 3D intermolecular packing networks are still elusive. Thus, by exploring a series of SMAs with gradually enlarged central planes, it is demonstrated that, at both single molecular and aggerated levels, there is an unexpected blue-shift for their film absorption but preferable reorganization energies, exciton lifetimes and binding energies with central planes enlarging, especially when comparing to their Y6 counterpart. More importantly, the significance of well-balanced molecular packing modes involving both central and end units is first disclosed through a systematic single crystal analysis, indicating that when the ratio of central planes area/end terminals area is no more than 3 likely provides a preferred 3D intermolecular packing network of SMAs. By exploring the limit size of 2D central planes, This work indicates that the structural profiles of ideal SMAs may require suitable central unit size together with proper heteroatom replacement instead of directly overextending 2D central planes to the maximum. These results will likely provide some guidelines for future better molecular design.

Research Advances of Nonfused Ring Acceptors for Organic Solar Cells.

The last few decades have witnessed the rapid development of organic solar cells (OSCs). High power conversion efficiencies (PCEs) of over 19% have been successfully achieved due to the emergence of fused-ring acceptors (FRAs). However, the high complexity and low yield for the material synthesis result in high production costs of FRAs, limiting the further commercial application of OSCs. In contrast, nonfused ring acceptors (NFRAs) with the merits of facile synthesis, high yield, and preferable stability can promote the development of low-cost OSCs. Currently, the PCEs of NFRAs-based OSCs have exceeded 17%, which is expected to reach efficiency comparable to that of the FRAs-based OSCs. This review describes the advantages of the recent advances in NFRAs, which emphasizes exploring how the chemical structures of NFRAs influence molecular conformation, aggregation, and packing modes. In addition, the further development of NFRA materials is prospected from molecular design, morphological control, and stability perspectives.

Impact of end‐capped engineering on the optoelectronic characteristics of pyrene‐based non‐fullerene acceptors for organic photovoltaics

AbstractPyrene‐based molecules are being explored as prospective fullerene‐free acceptors for organic solar cells (OSCs), due to their easy accessibility, structural planarity, and excellent electron delocalization. In this work, we successfully designed and analyzed pyrene‐based acceptor materials (QL1–QL8) to investigate their photophysical and electro‐optical parameters. Various geometric parameters were computed at the MPW1PW91/6‐31G(d,p). Advanced quantum chemical approaches were employed to characterize the molecules. All the tailored molecules (QL1–QL8) exhibit a lower bandgap than the reference (R), signifying their superiority. Among these, QL8 was found to have a maximum absorption (λmax) at 791.37 nm and an optical bandgap (ELUMO − EHOMO) minimum of 2.11 eV. Redshifted absorption spectra are observed in both gaseous and solvent phases for all the designed (QL1–QL8) molecules in contrast to R. Among these, QL4 exhibits the highest light harvesting efficiency (0.9826), and open‐circuit voltage. A detailed donor–acceptor investigation of QL8/PBDB‐T revealed the marvelous charge switching at the donor–acceptor interface. The approach used in this study is anticipated to facilitate the manufacturing of highly efficient OSC molecules.

Development of fullerene acceptors and the application of non-fullerene acceptors in organic solar cells

Organic solar cells (OSCs) enjoy a huge market and public attention as an emerging renewable and clean energy source due to their accessibility, sustainability, translucency, good flexibility, non-toxicity, and low preparation cost. However, the choice of an acceptor material is now the pivotal factor restricting the development of OSCs. To continuously improve stability and increase power conversion efficiency (PCE) for better performance, high-performance acceptor materials are an important part of enabling OSCs. From fullerenes and their derivatives and non-fullerenes, we sum up the latest research progress on high-performance acceptor materials for OSCs and then introduce the synthesis methods of non-fullerenes. The latest strategies to enhance the performance of organic solar cells and the wide range of applications of non-fullerene acceptors (NFAs) on different OSCs are also discussed. In addition, challenges faced by OSCs in improving their performance and the prospects for future development are revealed, providing new ideas for designing the next generation of high-performance OSCs.

Recent advancements in perylene diimide as an electron acceptor in organic solar cells

Interest in alternative powering solutions for the growing internet of things (IoT) has boosted the research on third-generation solar cell devices.

Quinoxaline-based Y-type acceptors for organic solar cells

Minimizing energy loss plays a critical role in the quest for high-performance organic solar cells (OSCs). However, the origin of large energy loss in OCSs is complicated, involving the strong...

A “belt” strategy for promoting the 3D network packing of fully non-fused ring acceptors in organic solar cells

With a cyclic “belt”, non-fused ring acceptor CSO4TIC shows more desirable performance compared to its counterpart with conventional linear side chains.

Unveiling symmetry: a comparative analysis of asymmetric and symmetric non-fullerene acceptors in organic solar cells

This study investigates the design and analysis of symmetric and asymmetric non-fullerene acceptors (NFAs), focusing on the burgeoning interest in asymmetric NFAs due to their exceptional solar cell properties.

Simple and Efficient Synthesis of Novel Tetramers with Enhanced Glass Transition Temperature for High‐Performance and Stable Organic Solar Cells

AbstractOligomer acceptors in organic solar cells (OSCs) have garnered substantial attention owing to their impressive power conversion efficiency (PCE) and long‐term stability. However, the simple and efficient synthesis of oligomer acceptors with higher glass transition temperatures (Tg) remains a formidable challenge. In this study, we propose an innovative strategy for the synthesis of tetramers, denoted as Tet‐n, with elevated Tgs, achieved through only two consecutive Stille coupling reactions. Importantly, our strategy significantly reduces the redundancy in reaction steps compared to conventional methods for linear tetramer synthesis, thereby improving both reaction efficiency and yield. Furthermore, the OSC based on PM6:Tet‐1 attains a high PCE of 17.32 %, and the PM6:L8‐BO:Tet‐1 ternary device achieves an even more higher PCE of 19.31 %. Remarkably, the binary device based on the Tet‐1 tetramer demonstrates outstanding operational stability, retaining 80 % of the initial efficiency (T80) even after 1706 h of continuous illumination, which is primarily attributed to the enhanced Tg (247 °C) and lower diffusion coefficient (1.56×10−27 cm2 s−1). This work demonstrates the effectiveness of our proposed approach in the straightforward and efficient synthesis of tetramers materials with higher Tgs, thus offering a viable pathway for developing high‐efficiency and stable OSCs.

Simple and Efficient Synthesis of Novel Tetramers with Enhanced Glass Transition Temperature for High-Performance and Stable Organic Solar Cells.

Oligomer acceptors in organic solar cells (OSCs) have garnered substantial attention owing to their impressive power conversion efficiency (PCE) and long-term stability. However, the simple and efficient synthesis of oligomer acceptors with higher glass transition temperatures (Tg ) remains a formidable challenge. In this study, we propose an innovative strategy for the synthesis of tetramers, denoted as Tet-n, with elevated Tg s, achieved through only two consecutive Stille coupling reactions. Importantly, our strategy significantly reduces the redundancy in reaction steps compared to conventional methods for linear tetramer synthesis, thereby improving both reaction efficiency and yield. Furthermore, the OSC based on PM6:Tet-1 attains a high PCE of 17.32 %, and the PM6:L8-BO:Tet-1 ternary device achieves an even more higher PCE of 19.31 %. Remarkably, the binary device based on the Tet-1 tetramer demonstrates outstanding operational stability, retaining 80 % of the initial efficiency (T80 ) even after 1706 h of continuous illumination, which is primarily attributed to the enhanced Tg (247 °C) and lower diffusion coefficient (1.56×10-27 cm2 s-1 ). This work demonstrates the effectiveness of our proposed approach in the straightforward and efficient synthesis of tetramers materials with higher Tg s, thus offering a viable pathway for developing high-efficiency and stable OSCs.

Halogenated Nonfused Ring Electron Acceptor for Organic Solar Cells with a Record Efficiency of over 17.

Three nonfused ring electron acceptors (NFREAs), namely, 3TT-C2-F, 3TT-C2-Cl, and 3TT-C2, are purposefully designed and synthesized with the concept of halogenation. The incorporation of F or/and Cl atoms into the molecular structure (3TT-C2-F and 3TT-C2-Cl) enhances the π-π stacking, improves electron mobility, and regulates the nanofiber morphology of blend films, thus facilitating the exciton dissociation and charge transport. In particular, blend films based on D18:3TT-C2-F demonstrate a high charge mobility, an extended exciton diffusion distance, and a well-formed nanofiber network. These factors contribute to devices with a remarkable power conversion efficiency of 17.19%, surpassing that of 3TT-C2-Cl (16.17%) and 3TT-C2 (15.42%). To the best of knowledge, this represents the highest efficiency achieved in NFREA-based devices up to now. These results highlight the potential of halogenation in NFREAs as a promising approach to enhance the performance of organic solar cells.

Quinoxaline derivatives as attractive electron-transporting materials.

This review article provides a comprehensive overview of recent advancements in electron transport materials derived from quinoxaline, along with their applications in various electronic devices. We focus on their utilization in organic solar cells (OSCs), dye-sensitized solar cells (DSSCs), organic field-effect transistors (OFETs), organic-light emitting diodes (OLEDs) and other organic electronic technologies. Notably, the potential of quinoxaline derivatives as non-fullerene acceptors in OSCs, auxiliary acceptors and bridging materials in DSSCs, and n-type semiconductors in transistor devices is discussed in detail. Additionally, their significance as thermally activated delayed fluorescence emitters and chromophores for OLEDs, sensors and electrochromic devices is explored. The review emphasizes the remarkable characteristics and versatility of quinoxaline derivatives in electron transport applications. Furthermore, ongoing research efforts aimed at enhancing their performance and addressing key challenges in various applications are presented.