Root Mean Square Acceleration Research Articles

Whole body vibration and rider comfort determination of an electric two-wheeler test rig

Background Two-wheeled vehicles are the major mode of transportation in India. Such vehicles are exposed to excessive vibration on the road when compared to four-wheeled vehicles. However, the research on the reduction of whole body vibration in the case of two-wheelers is not explored in detail. The present study predicts rider comfort in the case of an electric two-wheeler as per ISO 2631-1, by obtaining the finding the weighted acceleration at the strategic locations of vibration at the test rig. Methods An electric two-wheeler test rig is used in the study. The values of acceleration from the test rig in running conditions are obtained by using NI LabVIEW 2019. The drive cycle of the electric vehicle (EV) test rig is controlled by Sync sols’ EV lab software. Obtaining the weighted root mean square (RMS) acceleration from running the test setup, it is compared with the ISO 2631-1 standard to obtain the rider comfort. Results Loading area, traction motor, base mount, and suspension were found to be the strategic points of vibration. Frequency weighted RMS acceleration of 0.3 to 0.4 m/s2 obtained at these points are prone to cause discomfort for the rider. Vehicle speed, road profile, and duration of exposure were found to be important parameters affecting the rider’s comfort. A maximum of 4.6 m/s2 amplitude was observed. The loading area, which corresponds to a rider’s seat in actual vehicle, is important and reduction of these vibrations make the ride comfortable for the rider. Suspension and base mount of the test rig are found to be uncomfortable observing the weighted RMS acceleration. Conclusions A suitable damping technique design is very much essential in reducing these vibrations and improve the rider comfort, as many more non-deterministic vibrations are prone to cause dis-comfort in case of actual on road riding conditions.

Global Sensitivity Study of a Duffing-Type Nonlinear Vibration System

Abstract An interesting field of studying nonlinear systems is their sensitivity study. With sensitivity study the most influential parameters on a system can be obtained and then the simplification and improvement of the model will be possible. In this paper the global sensitivity study of a Duffing-type vibration system is carried out with Sobol’s variance-based method taking the root mean square of acceleration and the maximum acceleration as output variables. With the sensitivity study it was observed that the parameters of the excitation signal like the amplitude and the angular velocity are the most influential. It was also found that a single parameter has less influence on the system than the parameter combinations. The aim of the research is to carry out the global sensitivity study of a relatively simple nonlinear system. The study is the basis for further research tasks in order to perform the sensitivity study of more complex systems.

Tradeoff analysis of the energy-harvesting vehicle suspension system employing inerter element

This paper explores the vibration isolation performance and vibration energy recovery performance of an energy-harvesting vehicle suspension system employing inerter element. The study takes into account the structural changes in the suspension caused by introducing the inerter as a new type of vibration isolation element. According to the parallel-series combination of an inerter and a damper, two different structures of energy-harvesting suspension dynamic models are constructed. The mechanism of the suspension parameter uptake on vehicle ride comfort and energy-harvesting characteristics is analyzed. A multi-objective optimal design method for the energy-harvesting vehicle suspension system employing inerter element is proposed, which considers both vehicle ride comfort and energy-harvesting characteristics. A trade-off was found between suspension isolation performance and energy-harvesting efficiency. The results indicate that various structures of energy-harvesting vehicle suspension systems employing inerter element exhibit different vibration isolation performances. Compared with the conventional energy-harvesting suspension, the series structure reduces body acceleration by 15.9 %, and the root mean square (RMS) of energy-harvesting power of the suspension is 22.2 W. The parallel structure reduces the RMS of body acceleration by 14.3 % and the RMS of energy-harvesting efficiency is 56.3 %, with the RMS energy-harvesting power of 84.9 W. The parallel structure demonstrates superior overall performance.

Whole body vibration and rider comfort determination of an electric two-wheeler test rig

Background Two-wheeled vehicles are the major mode of transportation in India. Such vehicles are exposed to excessive vibration on the road when compared to four-wheeled vehicles. However, the research on the reduction of whole body vibration in the case of two-wheelers is not explored in detail. The present study predicts rider comfort in the case of an electric two-wheeler as per ISO 2631-1, by obtaining the finding the weighted acceleration at the strategic locations of vibration at the test rig. Methods An electric two-wheeler test rig is used in the study. The values of acceleration from the test rig in running conditions are obtained by using NI LabVIEW 2019. The drive cycle of the electric vehicle (EV) test rig is controlled by Sync sols’ EV lab software. Obtaining the weighted root mean square (RMS) acceleration from running the test setup, it is compared with the ISO 2631-1 standard to obtain the rider comfort. Results Loading area, traction motor, base mount, and suspension were found to be the strategic points of vibration. Frequency weighted RMS acceleration of 0.3 to 0.4 m/s2 obtained at these points are prone to cause discomfort for the rider. Vehicle speed, road profile, and duration of exposure were found to be important parameters affecting the rider’s comfort. A maximum of 4.6 m/s2 amplitude was observed. The loading area, which corresponds to a rider’s seat in actual vehicle, is important and reduction of these vibrations make the ride comfortable for the rider. Suspension and base mount of the test rig are found to be uncomfortable observing the weighted RMS acceleration. Conclusions A suitable damping technique design is very much essential in reducing these vibrations and improve the rider comfort, as many more non-deterministic vibrations are prone to cause dis-comfort in case of actual on road riding conditions.

A high-speed gear reshaping method for electric vehicles combining the effects of input torque and speed variation.

In this study, we introduce an optimization method for high-speed gear trimming in electric vehicles, focusing on variations in input torque and speed. This approach is designed to aid in vibration suppression in electric vehicle gears. We initially use Tooth Contact Analysis (TCA) and Loaded Tooth Contact Analysis (LTCA) to investigate meshing point localization, considering changes in gear tooth surface and deformations due to load. Based on impact mechanics theory, we then derive a formula for the maximum impact force. A 12-degree-of-freedom bending-torsion-axis coupled dynamic model for the helical gear drive in the gearbox's input stage is developed using the centralized mass method, allowing for an extensive examination of high-speed gear vibration characteristics. Through a genetic algorithm, we optimize the tooth profile and tooth flank parabolic modification coefficients, resulting in optimal vibration-suppressing tooth surfaces. Experimental results under various input torques and speeds demonstrate that the overall vibration amplitude is stable and lower than that of conventional gear shaping methods. Specifically, the root mean square of vibration acceleration along the meshing line under different conditions is 58.02 m/s2 and 20.33 m/s2, respectively. The vibration acceleration in the direction of the meshing line is 20.33 m/s2 and 20.02 m/s2 under varying torques and speeds, with 20.33 m/s2 being the lowest. Furthermore, the average magnitude of the meshing impact force is significantly reduced to 5015.2. This high-speed gear reshaping method not only enhances gear dynamics and reliability by considering changes in input torque and speed but also effectively reduces vibration in electric vehicle gear systems. The study provides valuable insights and methodologies for the design and optimization of electric vehicle gears, focusing on comprehensive improvement in dynamic performance.

Optimization and comparative analysis of an AISD suspension system with inerter element for enhanced ride and handling

This paper presents a comprehensive study on the modeling and optimization of an advanced suspension system, known as the Air Springs Inerter-Spring-Damper (AISD) system, incorporating an inerter element. A linear quarter car model is utilized to analyze the vibrational behavior of the AISD system when subjected to harmonic road disturbances. The steady-state response of the system is investigated by deriving the root mean square (RMS) values of the absolute relative displacement and acceleration of the sprung mass. To optimize the quarter car model, a criterion based on minimizing the absolute acceleration RMS while considering the relative displacement RMS is employed to calculate the inerter coefficient. The performance of the AISD suspension system is compared to that of both conventional quarter car systems and traditional air quarter car systems, with a focus on ride comfort and handling. The results demonstrate that the proposed AISD system outperforms the other two suspension systems, exhibiting a significant improvement in ride quality. Specifically, the AISD system achieves a 45% enhancement over the air suspension and an 82% improvement over the classic suspension system.

Collaborative control method of cruise ships’ vibration and mass based on structural intensity weighted sum analysis

Focusing solely on a single objective during the ship structure optimization process may negatively impact the performance of other aspects, this study proposes a collaborative method for cruise ship optimization, which can achieve both vibration control and lightweight while maintaining the structure's original strength. In this method, transfer path analysis is performed before vibration control, and a concept of structural intensity weighted sum (SIWS) is proposed to overcome the limitation of traditional SI analysis, which can only identify the main transfer paths at a single frequency. This concept calculates the weighted sum of SI in coordinate directions at different frequencies, aiming to identify the transfer paths of the weighted root mean square (WRMS) of vibration acceleration (ACC) at different frequencies, with its effect validated through performing vibration sensitivity analysis on structures along these paths. Furthermore, in the optimization to control vibration with mass and maximum stress as constraints, the response surface method (RSM) is used to construct surrogate models for the maximum stress of the cabin section, and constraints are applied to the surrogate model's values to guarantee structural strength. The optimization results reveal that the proposed collaborative method for vibration control and lightweight successfully achieves both objectives without compromising structural strength. Additionally, optimizing the primary transfer paths identified through SIWS analysis is shown to enhance the vibration control effect.

Development of a New Vertical Dynamic Model of a Rail Vehicle for the Analysis of Ride Comfort

The rail vehicle industry wants to produce vehicles with higher speeds, to maintain and increase its market share. However, when the speed of the vehicle increases, it may have an undesirable effect on ride comfort, in terms of ride dynamics. Recent developments towards lighter and faster vehicles make the problem of ride comfort at higher speeds increasingly important. Focusing on the behavior of flexible rather than rigid body behavior should not be neglected when designing long and light car bodies. There are several approaches to incorporate body flexibility in multibody simulations and they have some superiorities and weaknesses. In this study, an efficient and accurate vertical dynamic model for the ride comfort analysis is developed and implemented in a commercial object-oriented modeling (OOM) software Dymola (2015 FD01) which uses the open-source code Modelica. This model includes car body flexibility with the assembling of a rigid body approach. The developed model is compared to a three-dimensional vehicle model in the commercial Vampire software (Pro V5.50) at different velocities. For the vertical ride comfort analysis, the ISO 2631-1 standard was used for both the developed model and the three-dimensional model. The results are presented as acceleration history and awrms—weighted r.m.s (root mean square) of accelerations—as required by the standard. The developed model has shown its feasibility in terms of its efficiency and accuracy for the vertical ride comfort analysis. The accuracy of the model is evidenced by the fact that the car body vibration level at high speeds shows minor differences compared to the results of the Vampire, which is a validated commercial software in the area of rail vehicle dynamics. The approach involving the assembly of rigid bodies is applied for the first time for high-speed trains in dynamical modelling, with flexible car bodies for ride comfort analysis. Furthermore, it can be used for parametrical studies focusing on ride comfort, thereby offering a quite beneficial framework for addressing the challenges of ride comfort analysis in high-speed rail vehicles. Improvements for and analyses of other aspects are also possible, since the optimization and other useful libraries are readily available in Dymola/Modelica.

Fractional-Order PIλDμ Control to Enhance the Driving Smoothness of Active Vehicle Suspension in Electric Vehicles

The suspension system is a crucial part of an electric vehicle, which directly affects its handling performance, driving comfort, and driving safety. The dynamics of the 8-DoF full-vehicle suspension with seat active control are established based on rigid-body dynamics, and the time-domain stochastic excitation model of four tires is constructed by the filtered white noise method. The suspension dynamics model and road surface model are constructed on the Matlab/Simulink simulation software platform, and the simulation study of the dynamic characteristics of active suspension based on the fractional-order PIλDμ control strategy is carried out. The three performance indicators of acceleration, suspension dynamic deflection, and tire dynamic displacement are selected to construct the fitness function of the genetic algorithm, and the structural parameters of the fractional-order PIλDμ controller are optimized using the genetic algorithm. The control effect of the optimized fractional-order PIλDμ controller based on the genetic algorithm is analyzed by comparing the integer-order PID control suspension and passive suspension. The simulation results show that for optimized fractional-order PID control suspension, compared with passive suspension, the average optimization of the root mean square (RMS) of acceleration under random road conditions reaches over 25%, the average optimization of suspension dynamic deflection exceeds 30%, and the average optimization of tire dynamic displacement is 5%. However, compared to the integer-order PID control suspension, the average optimization of the root mean square (RMS) of acceleration under random road conditions decreased by 5%, the average optimization of suspension dynamic deflection increased by 3%, and the average optimization of tire dynamic displacement increased by 2%.

Accelerometer-based gait characteristics and their discrimination of gait independence in inpatients with subacute stroke

BackgroundGait analysis using inertial measurement devices can identify multifaceted gait disorders after a stroke. Although the usefulness of gait assessment using inertial measurement devices has been reported, its accuracy in discriminating gait independence in patients hospitalized for subacute stroke has not yet been validated. Research questionCan trunk acceleration indices discriminate between dependent and independent walking in patients with subacute stroke? MethodsThirty-five patients with subacute stroke (mean ± standard deviation, 75.5 ± 9.8 years, 19 males), who were able to understand instructions, had a premorbid modified Rankin scale <3, and were able to walk 16 m straight ahead under supervision were included. The stride regularity, harmonic ratio, and normalized root mean square of trunk accelerations were measured in three directions (mediolateral, vertical, and anterioposterior) during comfortable walking. The Functional Ambulation Categories were used as the dependent variable to classify the patients into two groups (dependent and independent walking groups), and each trunk acceleration index was used as the independent variable to calculate the area under the curve using receiver operating characteristic curves. ResultsTwelve patients were in the dependent group and 23 were in the independent group. The normalized root mean square in both the mediolateral and vertical directions were excellent discriminators of walking independence, with an area under the curve greater than 0.8. The cutoff values (sensitivity/specificity) were 2.20 m2/s2 (0.783/0.833) and 2.82 m2/s2 (0.739/0.833), respectively. SignificanceThe magnitude of vertical and lateral acceleration during gait in patients with subacute stroke, has excellent accuracy in discriminating between dependent and independent gaits. The results of this study will be useful for inexperienced clinicians working with stroke patients presenting with gait disturbances to accurately determine gait independence based on objective data.

Research on dynamic characteristics of railway side-cracked slab for train-track coupled system

The Ballastless track have been extensively implemented in high-speed railways. However, during the long-term operational process, degradation, such as side crack or defect phenomena produced on the slab inevitably, poses a threat to the stability and the durability of the track structure. Consequently, it is imperative to propose a dynamic approach that can effectively predict the impact of side-cracked slab (SCS) on the vehicle-track coupled system. This paper utilizes co-simulation technology to investigate the dynamic behavior of the slab with and without side crack. Firstly, the dynamic substructure of the finite element model of the SCS is obtained by eigenvalue analysis. Secondly, the SCS model has been applied to the classical vehicle-track coupled dynamic system, and the coupled dynamic model of the train-side cracked slab (TSCS) is established, which considers the multi-rigid-body vehicle subsystem, the flexible rail subsystem, the flexible SCS and subgrade foundation subsystem, and the wheel-rail nonlinear contact model. Later, the accuracy and reliability of the proposed model are verified by the comparison with field tests. Finally, the differences in the vibration characteristics of the vehicle and track structure with and without a side crack are compared and analyzed, and its dynamic stress of the slab as variable train speeds is revealed. The results indicate that the existence of a side crack will reduce the natural frequency of the slab, with a maximum decrease of 22.31%. Although the SCS has a minor effect on the vehicle responses, the existence of a side crack has a significant impact on the slab, especially on the root mean square (RMS) of the vibration acceleration of the slab, with a maximum difference of 74.10% laterally and an increase of 55.16% vertically. Meanwhile, the train speed remarkably affects the crack tip dynamic stress of the SCS, with a maximum increase of 76.07% in the longitudinal direction, 50.34% in the lateral direction and 49.09% in the vertical direction. Higher train speeds will further exacerbate crack propagation under long-term train loading. This study may contribute to the dynamic modeling of TSCS systems and the maintenance of the slab ballastless track.

Analysis of the isolation performance of two operator’s seat suspension systems

From the good isolation results of Negative-Stiffness (NS) suspension and Three-Parallel (TP) suspension, the new isolation models designed by NSTP suspension (combination of NS and TP) and TPNS suspension (combination of TP and NS) to improve the operator’s shaking and riding quality have been investigated based on a 3-D dynamic model of car. Sensitivity of initial parameters in NSTP and TPNS suspension are analyzed and optimised via root mean square of the vertical acceleration ( a wzs), pitching acceleration ( a wϕs), and rolling acceleration ( a wθs) of operator’s seat. Research shows that (1) the vertical-riding quality in operator’s seat designed by NSTP and TPNS suspension is enhanced by 54.9% and 55.5% compared to the traditional suspension of operator’s seat; (2) the isolation efficiency in the vertical direction of both NSTP and TPNS suspension is similar. However, the a wϕs and a wθs with TPNS suspension are greatly deteriorated by 48.9% and 54.5% in comparison with NSTP suspension; (3) design parameters of NSTP suspension greatly affect the a wzs, a wϕs, and a wθs; whereas design parameters of TPNS suspension insignificantly affect the a wzs, a wϕs, and a wθs; and (4) the a wzs, a wϕs, and a wθs with optimised TPNS suspension are smaller than designed TPNS suspension by 42.8%, 71.3%, and 78.1%, respectively. Therefore, optimised TPNS suspension should be applied to further ameliorate operator’s shaking and riding quality.

Magnetic-Control Variable Stiffness and Damping Tail Support for a Wind-Tunnel Aircraft Model

To suppress random vibration of aircraft models during wind tunnel tests, a novel magnetorheological elastomer (MRE)-based device with variable stiffness and variable damping (VSVD) is proposed, which is installed on the tail support system. Firstly, the dynamic characteristics of the tail support system are established using finite element model simulation to obtain the vibration mode and stress distribution. Next, the vibration reduction mechanism of the MRE-based tail support system is analyzed by solving a finite element model. Then, the magnetic-controlled VSVD device with an annular sandwich structure is proposed, and the decisive rheology material and structural parameters in relation to the tail support system’s dynamics are determined. Subsequently, the magnetically generated element with multicoils is designed to guarantee a large enough magnetic field, and the optimal structure parameters are obtained. Finally, random wind flow experiments in the wind tunnel and frequency sweep tests in the ground laboratory for the tail support system equipped on the VSVD device are conducted to verify the effectiveness of the proposed device, respectively. The results under 15–200 Hz random excitation indicate the root mean square of acceleration at the centroid of the aircraft model with the VSVD device can be decreased by 46.8% compared to the system without the VSVD device.

Vibration prediction and analysis of the main beam of the TBM based on a multiple linear regression model

The vibration of tunnel boring machine (TBM) is very difficult to monitor on sites, and related research on prediction methods is rare. Based on the field tunnelling test of a TBM in the Xinjiang Ehe project, the vibration information of the main beam of the TBM under different surrounding rock conditions is collected. The relationships among the tunnelling parameters, surrounding rock parameters and vibration parameters were studied. The results show that the penetration, cutter head speed, torque and thrust are important parameters affecting TBM vibration. In addition, the field penetration index and cutter head driving power index are significantly related to the root mean square of acceleration. Based on this, a multiple regression prediction model of TBM vibration is established. The model was verified and analysed via field projects, and the relative prediction error was less than 12%. This method can be used to predict the vibration of a TBM in real time through characteristic parameters without the use of a traditional monitoring system. This approach is highly important for determining the status of TBM equipment in real time.

Longitudinal changes in trunk acceleration and their relationship with gait parameters in post-stroke hemiplegic patients

ObjectiveThe purpose of this study was to examine the longitudinal changes in trunk acceleration, gait speed, and paretic leg motion in patients with post-stroke hemiparesis, the relationships between variables at each time point, and whether initial trunk acceleration and gait parameters were related to gait speed 2 months later. MethodsGait was assessed monthly in patients who could walk under supervision after stroke onset. Gait parameters, including gait speed and trailing limb angle (TLA), were measured. Trunk acceleration was quantified using acceleration root mean square (RMS) and stride regularity (SR) indices. ResultsThis study found statistically significant longitudinal changes in gait speed (p < .001), acceleration RMS of the total axes (p < .001), and SR of the vertical axes (p < .001). Gait speed correlated significantly with the acceleration RMS of the mediolateral (r = −0.815 to −0.901), vertical (r = −0.541 to −0.747), and anteroposterior (r = −0.718 to −0.829) axes, as well as the SR of the vertical axes (r = 0.558 to 0.724) at all time points from T0 to T2. For the TLA, only the acceleration RMS of the mediolateral axis correlated significantly over the entire study period (r = −0.530 to −0.724). In addition, initial TLA correlated significantly with gait speed after 2 months (r = −0.572). ConclusionThis study showed that assessing trunk acceleration helps estimate the improvement in gait status in patients with post-stroke hemiparesis. The magnitude and regularity of trunk acceleration varied longitudinally and were related to gait speed and paretic leg motion at each time point; however, they could not predict future changes in gait speed.

Whole body vibration and rider comfort determination of an electric two-wheeler test rig.

Two-wheeled vehicles are the major mode of transportation in India. Such vehicles are exposed to excessive vibration on the road when compared to four-wheeled vehicles. However, the research on the reduction of whole body vibration in the case of two-wheelers is not explored in detail. The present study predicts rider comfort in the case of an electric two-wheeler as per ISO 2631-1, by obtaining the finding the weighted acceleration at the strategic locations of vibration at the test rig. An electric two-wheeler test rig is used in the study. The values of acceleration from the test rig in running conditions are obtained by using NI LabVIEW 2019. The drive cycle of the electric vehicle (EV) test rig is controlled by Sync sols' EV lab software. Obtaining the weighted root mean square (RMS) acceleration from running the test setup, it is compared with the ISO 2631-1 standard to obtain the rider comfort. Loading area, traction motor, base mount, and suspension were found to be the strategic points of vibration. Frequency weighted RMS acceleration of 0.3 to 0.4 m/s 2 obtained at these points are prone to cause discomfort for the rider. Vehicle speed, road profile, and duration of exposure were found to be important parameters affecting the rider's comfort. A maximum of 4.6 m/s 2 amplitude was observed. The loading area, which corresponds to a rider's seat in actual vehicle, is important and reduction of these vibrations make the ride comfortable for the rider. Suspension and base mount of the test rig are found to be uncomfortable observing the weighted RMS acceleration. A suitable damping technique design is very much essential in reducing these vibrations and improve the rider comfort, as many more non-deterministic vibrations are prone to cause dis-comfort in case of actual on road riding conditions.

A novel 3-DOF active vibration isolation method for TBM’s laser target

In the process of full-face tunnel boring machine (TBM) tunneling, pitch angle measurement accuracy of the laser target is greatly reduced by low frequency vibrations with large amplitude and multiple degrees of freedom. In order to improve pitch angle measurement accuracy of laser target under vibration, a three-degree-of-freedom (3-DOF) active vibration isolation system is designed in this paper. A plate-type voice coil motor with large air gap and large thrust is designed based on genetic algorithm. In order to increase damping of the vibration isolation system, an eddy current damper is designed by combining copper plate and permanent magnet of the voice coil motor. An active vibration isolation device for laser target was built by using the designed plate-type voice coil motor and eddy current damper, and the dynamic model of the system was established. Aiming at control and stability problems caused by the nonlinear factors, a High-Frequency sliding mode controller which can ensure system asymptotically stable is designed in this paper. A 1–30 Hz sinusoidal sweep excitation experiment was performed on a shaking table. The experimental results show that the active vibration isolation system has a good damping effect. The root mean square (RMS) of acceleration in Y direction can be attenuated by 90.5%, in Z direction can be attenuated by 95.8%. The active isolation system effectively attenuates the vibration transmitted to the laser target, and pitch angular fluctuation of the laser target is reduced by 75.8%. The designed active vibration isolation system improves the pitch angle measurement accuracy of the laser target.

Fast calibration for vibration-based pavement roughness measurement based on model updating of vehicle dynamics

ABSTRACT The vibration-based pavement roughness measurement method has garnered significant attention in recent years due to the development of low-cost sensors. The vehicle calibration process is necessary before field measurement due to the effect of changeable vehicle dynamics, restricting the large-scale implementation of pavement roughness measurement. This paper proposes a novel calibration method for vibration-based pavement roughness measurement. It can quickly calibrate vehicle dynamic parameters through a few controlled impact tests. The model updating technique is employed to estimate vehicle dynamic parameters, resulting in the development of a full-car numerical model that accurately simulates the vibration of the test vehicle. A road-vehicle coupled simulation system is introduced, incorporating randomly generated road profiles and the calibrated full-car model. This system can simulate vibration responses under various conditions. A linear relationship between IRI (International Roughness Index) and vehicle vibration indices (e.g., RMS – Root Mean Square of vertical acceleration) is estimated based on simulated results. The efficiency and accuracy of the calibration method are validated on actual roads in Shanghai, China. The average IRI difference between the ground truth and test data reached 0.5 m/km in a 100 m road section, demonstrating the reliability and practicality of this fast calibration method.

Robust design optimization of the friction pendulum system isolated building considering system parameter uncertainties under seismic excitations

This paper presents a robust design optimization (RDO) of friction pendulum system (FPS) isolated building considering different uncertain parameters such as stiffness and damping ratio of the superstructure, stiffness and frictional force of the isolator and seismic excitation properties are considered as random parameters in this study. For this, the five-storey building is idealized using lumped mass considering FPS as the base isolator. Most analysis are carried out on the performance of FPS isolated structures assuming the system parameters to be deterministic. Neglecting parameters uncertainties can lead to underestimating the performance of FPS isolation system. Sensitivity analysis is carried out to determine the influence of each uncertain system parameters. Further, the optimal analysis is performed considering uncertainties to show the impact of the behaviour of FPS isolation system in which the optimization is performed using genetic algorithm considering root mean square acceleration (RMSA) as objective function. However, the optimal design involves minimizing the unconditional expected value of mean square response, without accounting for the uncertainties induced by the system parameters. In this regard, an RDO criterion for FPS base isolated building is performed in this study by considering various parameters uncertainty as random. The RDO process aims to reduce the combined value of the RMSA and its standard deviation for a given structure. The numerical study shows that the proposed RDO results yields significant improvements in terms of performance dispersion, accompanied by a marginal increase in RMSA response indicating its effectiveness over the unconditional response based optimum results.

Layered energy-saving speed planning and control method for electric vehicle on continuous signal lights road

Emergency start-stop in front of signal lights is one of the main reasons for additional energy consumption and ride discomfort of Electric Vehicle (EV). Existing research on this issue rarely takes into account both energy consumption and ride comfort. Therefore, the layered energy-saving speed planning and control method is proposed. The upper is the layer of energy-saving speed planning. This layer reduces energy consumption of EV by reducing the number of stops on continuous signal lights road and minimizing the range of speed change. On this basis, the sinusoidal variable speed curve is used to smooth the acceleration process to improve ride comfort. Finally, the energy-saving speed considering ride comfort is obtained. This layer makes up for the issue that existing research rarely takes into account both energy consumption and ride comfort of EV, and is an extension and innovation of existing research. The lower is the layer of Model Predictive Controller (MPC)-based speed control. Based on the longitudinal dynamics model of EV, the MPC-based speed controller is established to control EV to track the energy-saving speed. The controller is easy to understand and implement, and it is also suitable for other research on EV, which has certain application value. The simulation results show that under various working conditions, the maximum energy consumption of EV passing through continuous signal lights road without stopping is 604.29 kJ/km, and the minimum is 244.76 kJ/km. The energy consumption is lower than that of actual road test, and it can be saved by 23.18 % compared with the method in the same field. The maximum Root Mean Square of accelerations (RMSa) is 0.25 m/s2, and the minimum is 0.10 m/s2. The values of RMSa above are lower than 0.315 m/s2, which indicates that the ride comfort is good. The utilized method can reduce energy consumption of EV, improve its range and ride comfort, which has important reference significance for promoting the development of EV.