Absorption Of Ibuprofen Research Articles

Ibuprofen Loaded Electrospun Polymeric Nanofibers: A Strategy to Improve Oral Absorption.

The poor aqueous solubility of candidate drugs has presented a great challenge to formulation scientists for their effective oral delivery. Poor solubility is often associated with poor dissolution behavior and, subsequently, poor bioavailability for those drugs when intestinal absorption is dissolution rate limited. In the present study electrospun polymeric nanofibers were developed to address the poor aqueous solubility of ibuprofen, a Biopharmaceutic Classification System (BCS) class-II drug. Hydrophilic spinnable polymers like polyvinyl pyrrolidone were deployed as a carrier system for the fabrication of nanofibers. The electrospinning parameters like flow rate, voltage, and spinneret to collector distance were optimized. The fabricated ibuprofen-loaded nanofibers were characterized using scanning electron microscopy and differential scanning calorimetry. Drug release studies and ex vivo intestinal absorption studies were also carried out. The nanofiber-based platform significantly improved in vitro absorption of ibuprofen compared to pure ibuprofen crystals.

Preparation, in vitro and in vivo Evaluation of Thermosensitive in situ Gel Loaded with Ibuprofen-Solid Lipid Nanoparticles for Rectal Delivery.

BackgroundIbuprofen (IBU), a nonsteroidal anti-inflammatory drug, shows poor gastrointestinal absorption due to its low solubility, which limits its clinical application.ObjectiveIn the present study, we aimed to develop thermosensitive gel-mediated ibuprofen-solid lipid nanoparticles (IBU-SLN-ISG) to improve the dissolution and bioavailability of IBU after rectal delivery.MethodsIBU-loaded SLNs (IBU-SLNs) were developed and optimized applying Box-Behnken design. The optimized IBU-SLNs were characterized by physicochemical parameters and morphology. Then, the optimized IBU-SLNs was incorporated into the gel and characterized for gel properties and rheology and investigated its release in vitro, pharmacokinetics in vivo, rectal irritation and rectal retention time.ResultsThe optimized SLNs had an EE of 90.74 ± 1.40%, DL of 11.36 ± 1.20%, MPS of 166.77 ± 2.26 nm, PDI of 0.27 ± 0.08, and ZP of −21.00 ± 0.59 mV. The FTIR spectra confirmed successful encapsulation of the drug inside the nanoparticle as only peaks responsible for the lipid could be identified. This corroborated well with XRD spectra, which showed a completely amorphous state of the IBU-SLNs as compared to the crystalline nature of the pure drug. The gelation temperature of the prepared IBU-SLN-ISG was 33.30 ± 0.78°C, the gelation time was 14.67 ± 2.52 s, the gel strength was 54.00 ± 1.41 s, and the mucoadhesion was (11.54±0.37) × 102dyne/cm2. The in vitro results of IBU-SLNs and IBU-SLN-ISG showed a biphasic release pattern with initial burst release followed by sustained release. More importantly, IBU-SLN-ISG produced much better absorption of IBU and improved bioavailability in rats. In addition, IBU-SLN-ISG caused no irritation or damage to rectal tissues, and could be retained in the rectum for a long time.ConclusionThermosensitive in situ gel loaded with IBU-solid lipid nanoparticles might be further developed as a more convenient and effective rectal dosage form.

HLD-NAC design and evaluation of a fully dilutable lecithin-linker SMEDDS for ibuprofen

Lecithin-linker microemulsions have been previously proposed as a platform for designing a fully dilutable self-microemulsifying drug delivery system (SMEDDS). This SMEDDS formulation, composed of ethyl caprate (oil), lecithin (Le), glycerol monooleate (lipophilic linker, LL) and polyglycerol caprylate (hydrophilic linker, HL), produced a ternary phase diagram (TPD) that had a fully dilutable path suitable for oral drug delivery. However, introducing ibuprofen as an active pharmaceutical ingredient (API) resulted in TPD phase boundaries that eliminated the fully dilutable path. The purpose of this work was to understand the origin of the changes in the TPD, use that understanding to restore the fully dilutable path with an ibuprofen-loaded SMEDDS, and finally to evaluate the absorption of ibuprofen in vivo. The effect of ibuprofen on the HLD (hydrophilic-lipophilic difference, interpreted as normalized net interfacial curvature) of the system was evaluated via a polar oil model, showing that ibuprofen played a surfactant-like role, having a characteristic curvature (Cc) value of +5 (highly hydrophobic). The net-average curvature (NAC) framework used the HLD calculated with Le, LL, HL and ibuprofen Cc to generate TPDs in ibuprofen lecithin-linker systems. The HLD-NAC simulations show that restoring full dilutability required a highly hydrophilic linker (HL−) with a Cc of −5 or more negative. The fully dilutable path was restored after introducing a hexaglycerol caprylate as HL- (Cc = −6). Plasma concentration profiles obtained with this ibuprofen-loaded SMEDDS showed a more than three-fold increase in the area under the curve (AUC) of rat plasma concentration profiles compared to the same 25 mg/kg ibuprofen dose in suspension.

PENGARUH PENAMBAHAN POLIETILEN GLIKOL 6000 PADA TABLET IBUPROFEN DISPERSI PADAT TERHADAP ABSORBSI IBUPROFEN SECARA IN SITU

Drug absorption can be decided by various methods, namely in vitro methods, in situ methods, and in vivo methods. The in situ method is a procedure that is very close to the in vivo method. The aim of this study was to identify the effect of accumulation of polyethylene glycol 6000 (PEG 6000) on solid dispersion of ibuprofen tablets on the in-situ absorption of the drug. This research was conducted through an experiment to determine the effect of adding polyethylene glycol 6000 to the absorption of ibuprofen in situ by flowing the solution from solid dispersion ibuprofen tablets, solutions from generic ibuprofen tablets and standard ibuprofen solutions. The solid dispersion system was carried out by melting ibuprofen and polyethylene glycol 6000 in a ratio of 1:05. The drug solution was flowed through the lumen of the small intestine of male rats. Unabsorbed ibuprofen was measured by an ultraviolet spectrophotometer at a wavelength of 225.5 nm. Next, the absorbed level of ibuprofen was calculated. The results showed that ibuprofen from solid dispersion tablets was absorbed more than ibuprofen from generic tablets and standard ibuprofen. It can be concluded that polyethylene glycol 6000 has an effect on the absorption of ibuprofen in situ.

In-vitro and in-vivo evaluation of taste-masked ibuprofen formulated in oral dry emulsions

Objective The aim of this study was to develop a paediatric oral preparation for ibuprofen. Significance Ibuprofen is widely used for defervescence in children, but medication compliance is poor due to its bitter taste. Dry emulsions possess good stability and can be transported and stored in solid form; they can be dispersed into liquid emulsions with water and easily administered to children. Methods In this study, a dry emulsion excipient was prepared by spray drying: a mixture of orange peel and corn oils (3:7, w/w) were used as the oil phase and solvent for ibuprofen; gum arabic and gum tragacanth were chosen as emulsifiers; and maltodextrin was used as a solid carrier. Results The particle sizes of the liquid and reconstituted emulsions were 5.75 μm and 6.11 μm, respectively; the average particle size distribution of the dry emulsion powder was 8.13 μm; scanning electron microscopy showed that the dry emulsion powder was composed of evenly distributed smooth spheres. At a drug loading of 36.52 ± 1.15 mg/g, 90% of ibuprofen was released from the dry emulsion excipient within 30 min. Sensory evaluations using human volunteers, rats and an electronic tongue demonstrated that the emulsion had a taste-masking effect on ibuprofen.It was further corroborated by in vivo studies using rat model that highlighted a 1.76-fold increase in ibuprofen absorption when the drug was administered as a emulsion compared with granules. Conclusions These results indicate that the dry emulsion for taste-masking is promising and valuable in the development of ibuprofen for pediatrics.

Inhalationally Administered Semifluorinated Alkanes (SFAs) as Drug Carriers in an Experimental Model of Acute Respiratory Distress Syndrome.

Aerosol therapy in patients suffering from acute respiratory distress syndrome (ARDS) has so far failed in improving patients’ outcomes. This might be because dependent lung areas cannot be reached by conventional aerosols. Due to their physicochemical properties, semifluorinated alkanes (SFAs) could address this problem. After induction of ARDS, 26 pigs were randomized into three groups: (1) control (Sham), (2) perfluorohexyloctane (F6H8), and (3) F6H8-ibuprofen. Using a nebulization catheter, (2) received 1 mL/kg F6H8 while (3) received 1 mL/kg F6H8 with 6 mg/mL ibuprofen. Ibuprofen plasma and lung tissue concentration, bronchoalveolar lavage (BAL) fluid concentration of TNF-α, IL-8, and IL-6, and lung mechanics were measured. The ibuprofen concentration was equally distributed to the dependent parts of the right lungs. Pharmacokinetic data demonstrated systemic absorption of ibuprofen proofing a transport across the alveolo-capillary membrane. A significantly lower TNF-α concentration was observed in (2) and (3) when compared to the control group (1). There were no significant differences in IL-8 and IL-6 concentrations and lung mechanics. F6H8 aerosol seemed to be a suitable carrier for pulmonary drug delivery to dependent ARDS lung regions without having negative effects on lung mechanics.

Pharmacokinetics of ibuprofen: comparison of the fixed combination of ibuprofen plus caffeine with ibuprofen lysinate or ibuprofen acid. Results of two single-dose studies (randomised, single centre, crossover, open-label)

Analgesics containing readily soluble ibuprofen (e.g. as the lysinate) were developed with the aim of ensuring a more rapid relief of pain than ibuprofen acid through faster absorption in the gastrointestinal tract. Since the degree of gastric filling can have a significant influence on absorption, two studies investigated the pharmacokinetics of ibuprofen lysinate and ibuprofen acid (combined with caffeine) on an empty (fasted) stomach and after a standard breakfast. The absorption of ibuprofen as the lysinate was only faster when taken on an empty stomach; after a standard breakfast, the time to peak plasma levels with ibuprofen acid (with caffeine) was actually shorter than for ibuprofen lysinate. Since analgesics are usually not taken on an empty stomach, this reduces the alleged advantages of ibuprofen lysinate.

Pharmacokinetics of ibuprofen: comparison of the fixed combination of ibuprofen plus caffeine with ibuprofen lysinate or ibuprofen acid

Analgesics containing readily soluble ibuprofen (e.g. as the lysinate) were developed with the aim of ensuring a more rapid relief of pain than ibuprofen acid through faster absorption in the gastrointestinal tract. Since the degree of gastric filling can have a significant influence on absorption, two studies investigated the pharmacokinetics of ibuprofen lysinate and ibuprofen acid (combined with caffeine) on an empty (fasted) stomach and after a standard breakfast. The absorption of ibuprofen as the lysinate was only faster when taken on an empty stomach; after a standard breakfast, the time to peak plasma levels with ibuprofen acid (with caffeine) was actually shorter than for ibuprofen lysinate. Since analgesics are usually not taken on an empty stomach, this reduces the alleged advantages of ibuprofen lysinate.

Development and characterisation of ibuprofen-loaded nanoemulsion with enhanced oral bioavailability

Lipophilic compounds constitute a majority of therapeutics in the pipeline of drug discovery. Despite possessing enhanced efficacy and permeability, some of these drugs suffer poor solubility necessitating the need of a suitable drug delivery system. Nanoemulsion is a drug delivery system that provides enhanced solubility for poorly soluble drugs in an attempt to improve the oral bioavailability. The purpose of this study is to develop a nanoemulsion system using ibuprofen as a model drug in order to investigate the potential of this colloidal system to enhance the absorption of poorly water-soluble drugs. Ibuprofen loaded-nanoemulsion with different drug concentrations (1.5, 3 and 6% w/w) were formulated from olive oil, sucrose ester L-1695 and glycerol using D-phase emulsification technique. A pseudoternary phase diagram was utilised to identify the optimal excipient composition to formulate the nanoemulsion system. In vitro diffusion chamber studies using rodent intestinal linings highlighted improved absorption profile when ibuprofen was delivered as nanoemulsion in comparison to microemulsions and drug-in-oil systems. This was further corroborated by in vivo studies using rat model that highlighted a two-fold increase in ibuprofen absorption when the drug was administered as a nanoemulsion relative to drug-in-oil system. On the other hand, when ibuprofen was administered as microemulsions, only a 1.5-fold increase in absorption was observed relative to drug-in-oil system. Thus, this study highlights the potential of using nanoemulsion as a drug delivery system to enhance the oral bioavailability of hydrophobic drugs.

Phase I Pharmacokinetic Study of Fixed-Dose Combinations of Ibuprofen and Acetaminophen in Healthy Adult and Adolescent Populations

IntroductionA fixed-dose combination (FDC) of ibuprofen and acetaminophen has been developed that provides greater analgesic efficacy than either agent alone at the same doses without increasing the risk for adverse events.MethodsWe report three clinical phase I studies designed to assess the pharmacokinetics (PK) of the FDC of ibuprofen/acetaminophen 250/500 mg (administered as two tablets of ibuprofen 125 mg/acetaminophen 250 mg) in comparison with its individual components administered alone or together, and to determine the effect of food on the PK of the FDC. Two studies in healthy adults aged 18–55 years used a crossover design in which subjects received a single dose of each treatment with a 2-day washout period between each. In the third study, the bioavailability of ibuprofen and acetaminophen from a single oral dose of the FDC was assessed in healthy adolescents aged 12–17 years, inclusive.ResultsA total of 35 and 46 subjects were enrolled in the two adult studies, respectively, and 21 were enrolled in the adolescent study. Ibuprofen and acetaminophen in the FDC were bioequivalent to the monocomponents administered alone or together. With food, the maximum concentration (Cmax) for ibuprofen and acetaminophen from the FDC was reduced by 36% and 37%, respectively, and time to Cmax (i.e. tmax) was delayed. Overall drug exposure to ibuprofen or acetaminophen in the fed versus fasted states was similar. In adolescents, overall exposure to acetaminophen and ibuprofen was comparable with that in adults, with a slightly higher overall exposure to ibuprofen. Exposure to acetaminophen and ibuprofen in adolescents aged 12–14 years was slightly higher versus those aged 15–17 years. Adverse events were similar across all treatment groups.ConclusionsThe FDC of ibuprofen/acetaminophen 250/500 mg has a PK profile similar to its monocomponent constituents when administered separately or coadministered, indicating no drug–drug interactions and no formulation effects. Similar to previous findings for the individual components, the rates of absorption of ibuprofen and acetaminophen from the FDC were slightly delayed in the presence of food. Overall, adolescents had similar exposures to acetaminophen and ibuprofen as adults, while younger adolescents had slightly greater exposure than older adolescents, probably due to their smaller body size. The FDC was generally well tolerated.

In vitro prediction of in vivo absorption of ibuprofen from suspensions through rational choice of dissolution conditions

Two ibuprofen suspension formulations were investigated for their dissolution in various bicarbonate, phosphate and acetate buffers. Phosphate and acetate gave faster release than bicarbonate at comparable molarities. Nevertheless, mass transport modelling using the reversible non-equilibrium (RNE) approach enabled the calculation of phosphate molarities that gave good matches to physiological bicarbonate in terms of ibuprofen dissolution. This shows that developing surrogate buffers for bicarbonate that are devoid of the technical difficulties associated with the bicarbonate-CO2 systems is possible. In addition, the intestinal dissolution kinetics of the tested suspensions were determined by applying compartmental pharmacokinetic modelling to plasma profiles that were previously obtained for these suspensions in an in vivo study performed on healthy human volunteers. The in vitro dissolution profiles in bicarbonate compared reasonably well with the profiles representing the in vivo intestinal dissolution kinetics of the tested suspensions when applied to healthy human volunteers in a pharmacokinetic study. This shows the possible potential toward extending biowaivers so that they include BCS class IIa compounds.

A Randomized, Double-Blind, Placebo-Controlled Trial of Ibuprofen Lysinate in Comparison to Ibuprofen Acid for Acute Postoperative Dental Pain.

IntroductionIbuprofen acid is poorly soluble in the stomach, thus reaching maximum plasma levels at approximately 90 min post-dose. Ibuprofen lysinate has been developed to accelerate absorption of ibuprofen to shorten the time to analgesic efficacy. This study compared analgesic efficacy and onset of effect of a single dose of ibuprofen lysinate or ibuprofen acid in patients undergoing third molar extraction.MethodsRandomized, double-blind, placebo-controlled, multi-center, parallel-group single-dose study. Adults (18–60 years) undergoing extraction of ≥ 1 third molar were randomized 2:2:1 to ibuprofen lysinate, ibuprofen acid, or placebo postoperatively. Pain relief (PAR, 5-point scale, 0 = none to 4 = complete pain relief) and pain intensity (PI, 100 mm visual analog scale) were assessed between 15 and 360 min post-dose. The primary endpoint was the weighted sum of PAR scores at 6 h (TOTPAR). Time to onset of effect, global assessment of efficacy, and adverse events were also assessed.ResultsOverall, 351 patients received ibuprofen lysinate (N = 141), ibuprofen acid (N = 139), or placebo (N = 71). Both active treatments significantly reduced pain compared with placebo, from 15 min post-dose to 6 h (TOTPAR: ibuprofen lysinate: 19.57; ibuprofen acid: 19.96; placebo: 8.27). Ibuprofen lysinate was significantly more effective than placebo, but non-inferior to ibuprofen acid, at providing pain relief over 6 h. There was no significant difference between ibuprofen lysinate and ibuprofen acid for onset of analgesia. Both ibuprofen formulations were well tolerated; all adverse events were mild to moderate and considered unrelated to treatment.ConclusionsA single dose of ibuprofen lysinate is non-inferior to ibuprofen acid in terms of analgesic efficacy, onset of action, and tolerability in patients who have recently undergone dental surgery.Trial RegistrationEudraCT No. 2006-006942-33.Plain Language SummaryPlain language summary available for this article.Electronic supplementary materialThe online version of this article (10.1007/s40122-019-00148-1) contains supplementary material, which is available to authorized users.

A Pharmacokinetic Study of an Ibuprofen Topical Patch in Healthy Male and Female Adult Volunteers.

The pharmacokinetics of a novel locally applied ibuprofen topical patch was evaluated. Healthy subjects (n=28) were administered a 200-mg ibuprofen patch every 24hours for 5 days, and steady-state pharmacokinetics was determined. The amount of ibuprofen remaining in the patch following each patch removal was also assessed. The maximum steady-state drug concentration and area under the concentration curve from time 0 on day5 (t=0) to the 24-hours sample on day 6 were 514ng/mL (95% CI 439 to 603ng/mL) and 9.78kg·h/mL (95% CI 8.43 to 11.4kg·h/mL), respectively. Maximum ibuprofen concentration on day 5 occurred at 20 hours post-patch application. No evidence of drug accumulation was observed, and steady state was achieved between days 2 and 5. Ibuprofen levels attenuated rapidly to baseline within 24hours after treatment discontinuation. The amount of ibuprofen remaining in the patch was high (≥80%). Treatment-emergent adverse events were generally mild, with the most prevalent being headache (n=6; 21.4%). Only 4 TEAEs were considered related to the ibuprofen patch: paresthesia (n=1), headache (n=2), and pruritic rash (n=1). The study found that the systematic absorption of ibuprofen from a 200-mg patch was low and that the levels of ibuprofen leaving the patch over a 24-hour period are consistent with levels required for therapeutic relief as shown in other studies.

Absorption of ibuprofen orodispersible tablets in early postoperative phase – a pharmacokinetic study

Objective: Patient-controlled oral analgesia has gained popularity in postoperative pain management. Anesthesia and surgery delay gastrointestinal tract function and this may therefore decrease bioavailability of drugs taken by mouth. To hasten absorption, an orodispersible ibuprofen tablet has been developed. In this study, we evaluated the pharmacokinetics and feasibility of orodispersible ibuprofen tablets in spine surgery patients.Methods: The study design was a prospective clinical trial where each patient served as her/his own control. Fifteen patients aged 19–75 years were given two orodispersible ibuprofen 200 mg tablets the day before surgery and two more tablets immediately after surgery. Blood samples for ibuprofen concentrations were taken at intervals for 6 hours following pre- and postsurgical administration of ibuprofen.Results: The mean preoperative area under time–concentration curve for ibuprofen (AUC0–360) was 4806 (SD 1104) min·mg/L, and after surgery it was 2141 (583) min·mg/L (mean difference 2664, 95% CI for difference 2003 to 3325, p < .001). The mean of the maximum preoperative plasma concentration of ibuprofen was three times higher, 26.7 (7.7) mg/L, than the postoperative value of 8.6 (2.1) mg/L (mean diff. 18.1, 95% CI 13.9 to 22.4, p < .001). Times to maximum concentration were similar pre- and postoperatively at 155 (58) minutes and 169 (113) minutes (p = .67). No serious or unexpected adverse events were recorded.Conclusions: While orodispersible ibuprofen tablets were feasible, ibuprofen absorption decreased immediately after surgery compared to the day before surgery. Thus, further studies are needed to establish the adequate initial postoperative dose.

Controlled release ibuprofen-poloxamer gel for epidural use – A pharmacokinetic study using microdialysis in pigs

In order to avoid the risks of sideeffects of epidural local anesthetics and opioids, the use of nonsteroidal anti-inflammatory drugs (NSAIDs) epidurally would be an interesting option of analgesic therapy. The fairly short duration of action of spinally administered NSAIDs, e.g., ibuprofen, may be prolonged by using controlled release poloxamer gel formulation. Using a microdialysis technique we studied the epidural and intrathecal pharmacokinetics of ibuprofen after its epidural administration as a poloxamer 407 formulation or a solution formulation. In addition, plasma ibuprofen concentrations were analyzed from central venous blood samples. Ibuprofen concentrations in the epidural space were significantly higher and longer lasting after the epidural gel injection compared with the epidural solution injection. The epidural AUC of ibuprofen was over threefold greater after epidural ibuprofen gel injection compared with the ibuprofen solution injection (p<0.001). The systemic absorption of ibuprofen from 25% poloxamer 407 gel was very low. The in situ forming poloxamer gel acted as a reservoir allowing targeted ibuprofen release at the epidural injection site and restricted ibuprofen molecules to a smaller spinal area. Ibuprofen diffusion from the epidural space to the intrathecal space was steady and prolonged. These results demonstrate that the use of epidurally injectable poloxamer gel can increase and prolong ibuprofen delivery from epidural space to the CSF enhancing thus ibuprofen entry into the central neuroaxis for spinal analgesia. Further toxicological and dose-finding studies are justified.

Self-Microemulsifying Drug Delivery System: Formulation and Study Intestinal Permeability of Ibuprofen in Rats.

The study was aimed at developing a self-microemulsifying drug delivery system (SMEDDS) of Ibuprofen for investigating its intestinal transport behavior using the single-pass intestinal perfusion (SPIP) method in rat. Methods. Ibuprofen loaded SMEDDS (ISMEDDS) was developed and was characterized. The permeability behavior of Ibuprofen over three different concentrations (20, 30, and 40 µg/mL) was studied in each isolated region of rat intestine by SPIP method at a flow rate of 0.2 mL/min. The human intestinal permeability was predicted using the Lawrence compartment absorption and transit (CAT) model since effective permeability coefficients (P eff) values for rat are highly correlated with those of human, and comparative intestinal permeability of Ibuprofen was carried out with plain drug suspension (PDS) and marketed formulation (MF). Results. The developed ISMEDDS was stable, emulsified upon mild agitation with 44.4 nm ± 2.13 and 98.86% ± 1.21 as globule size and drug content, respectively. Higher P eff in colon with no significant P eff difference in jejunum, duodenum, and ileum was observed. The estimated human absorption of Ibuprofen for the SMEDDS was higher than that for PDS and MF (P < 0.01). Conclusion. Developed ISMEDDS would possibly be advantageous in terms of minimized side effect, increased bioavailability, and hence the patient compliance.

Cubic phase nanoparticles for sustained release of ibuprofen formulation characterization and enhanced bioavailability study

In order to improve the oral bioavailability of ibuprofen, ibuprofen-loaded cubic nanoparticles were prepared as a delivery system for aqueous formulations. The cubic inner structure was verified by cryogenic transmission electron microscopy. With an encapsulation efficiency greater than 85%, the ibuprofen-loaded cubic nanoparticles had a narrow size distribution around a mean size of 238 nm. Differential scanning calorimetry and X-ray diffraction determined that ibuprofen was in an amorphous and molecular form within the lipid matrix. The in vitro release of ibuprofen from cubic nanoparticles was greater than 80% at 24 hours, showing sustained characteristics. The pharmacokinetic study in beagle dogs showed improved absorption of ibuprofen from cubic nanoparticles compared to that of pure ibuprofen, with evidence of a longer half-life and a relative oral bioavailability of 222% (P < 0.05). The ibuprofen-loaded cubic nanoparticles provide a promising carrier candidate with an efficient drug delivery for therapeutic treatment.

Clinical Pharmacokinetics of Ibuprofen Arginine

Currently, several ibuprofen compounds are available on the market, mainly differing in terms of pharmaceutical composition that influence the pharmacokinetic profile and eventually the onset of drug action. This review will mainly deal with the clinical pharmacokinetics of ibuprofen arginine, an alternative formulation specifically designed to improve the absorption of ibuprofen. Indeed, available data from studies in healthy volunteers have consistently shown that the formulation of ibuprofen arginine is characterized by prompt absorption of ibuprofen as compared to the conventional formulation at all tested doses with higher peak plasma concentration and lower Tmax values. This trend has been confirmed also in studies dealing with chiral ibuprofen pharmacokinetics. Most importantly, the shortening in the absorption time observed either with racemic mixture or with the S(+)-enantiomer of ibuprofen arginine did not imply a faster drug elimination eventually leading to inadequate daily drug exposure, as documented by T1/2 and AUC values being comparable to those measured with the free acid form. Taken together, the pharmacokinetic/dynamic characteristics of ibuprofen arginine can be considered particularly favorable for several clinical conditions, such as moderate/severe pain, in which a rapid pharmacologic effect is required.

Thermoresponsive Copolymer Cryogel Possessing Molecular Memory: Synthesis, Energetics of Collapse and Interaction with Ligands

AbstractAn imprinted thermoresponsive cryogel of copolymer of N‐isopropylacrylamide and N‐[3‐(N,N′‐dimethylamino)propyl]acrylamide was synthesized in a frozen (−10 °C) aqueous medium in presence of a molecular template, the drug substance ibuprofen. A reversible volume phase transition upon heating (thermotropic collapse) of the swollen cryogel was studied by high‐sensitivity differential scanning calorimetry. In the absence of ligands, the transition temperature, enthalpy, and width were 82.5 °C, 9.8 J · g−1 and 32.2 °C, respectively. Significant changes in the transition parameters were observed in presence of the template ligand (ibuprofen): with increasing ligand concentration the transition temperature decreased down to 30 °C, the enthalpy passed through a minimum, and the transition width notably reduced. The binding constants of ibuprofen by the cryogel subchains in the collapsed and swollen states were 119 and 5 M−1, respectively. This implies a preferential binding of ibuprofen by the shrunken cryogel. The excess absorption of ibuprofen by the cryogel related to its collapse amounted to 0.327 mmol · g−1 while for all other ligands that were structural analogs of ibuprofen this parameter did not exceed 0.016 mmol · g−1. Consequently, the imprinted cryogel possessed a selective molecular memory toward the template ligand. magnified image

Enhanced dissolution of ibuprofen using solid dispersion with poloxamer 407

To improve its dissolution, ibuprofen solid dispersions (SDs) were prepared, characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR), and evaluated for solubility, and in-vitro ibuprofen release. Loss of individual surface properties during melting and re-solidification as revealed by SEM micrographs indicated the formation of effective SDs. Absence or shifting towards the lower melting temperature of the drug peak in SDs and physical mixtures in DSC study indicated the possibilities of drug-polymer interactions. FTIR spectra showed the presence of drug crystalline in SDs. The effect of improved dissolution on the oral absorption of ibuprofen in rats was also studied. Quicker release of ibuprofen from SDs in rat intestine resulted in a significant increase in AUC and C(max), and a significant decrease in T(max) over pure ibuprofen. Comparison of the enhanced solubility, dissolution, AUC, and C(max) of ibuprofen from different poloxamers suggested that the preparation of ibuprofen SDs using P 407 as a meltable hydrophilic polymer carrier could be a promising approach to improve its solubility, dissolution and absorption rate.