Absence Of Base Research Articles

Divergent Synthesis of Benzo[4,5]imidazo[2,1-b][1,3]thiazines and α-Trifluoromethyl-β-arylthio Tertiary Alcohols from 2-Mercaptobenzimidazoles and α-CF3 Alkenes.

An efficient and metal-free approach for the divergent synthesis of 2-fluoro-3-aryl-4H-benzo[4,5]imidazo[2,1-b][1,3]thiazines and α-trifluoromethyl-β-arylthio tertiary alcohols from 2-mercaptoimidazoles and α-CF3 alkenes has been developed. The chemoselectivity was well controlled by base or light; a series of 2-fluoro-3-aryl-4H-benzo[4,5]imidazo[2,1-b][1,3]thiazines were afforded via base-mediated sequential SN2'- and SNV-type reactions. Meanwhile, α-trifluoromethyl-β-arylthio tertiary alcohols could be selectively achieved through visible-light-driven and electron donor-acceptor (EDA) complex-initiated radical cascade thiolation/hydroxylation in the absence of base, transition metal, and external photocatalyst.

Catalyst and base-free, direct oxidation of chitin to lactic acid with hydrogen peroxide

In recent years, the research on the conversion of chitin to high value-added chemicals has attracted more and more attention. At present, the method of preparing lactic acid from chitin mostly uses strong base or catalyst. The reaction system under alkaline condition not only corrodes the container but also easily harms the human body. Herein, a simple and effective method to convert chitin to organic acids in catalyst and base-free conditions is developed. The use of H2O2 only can efficiently convert chitin to organic acids in the absence of bases and catalysts. Under the optimal conditions of 30 mg chitin, 2.1 mL water, 0.9 mL H2O2 at 230 °C for 1.5 h, the lactic acid yield of chitin can reach 58.2 % and the total organic acid yield can reach 84.0 %. This work provides an efficient method for the resource utilization of chitin biomass.

Roles of Metal‐Organic Framework Supports in Base‐Free Oxidation of 5‐Hydroxymethylfurfural to Furan‐2,5‐Dicarboxylic Acid over Pt‐Based Catalysts

AbstractThe catalytic oxidation of 5‐hydroxymethylfurfural (HMF) is an important process for producing a renewable furan‐2,5‐dicarboxylic acid (FDCA). Although several Pt‐based catalysts have been reported to efficiently catalyze the oxidation of HMF, the functional roles of catalyst supports, as corroborated by spectroscopic techniques, have not been fully described. Here, we report on Pt nanoparticles supported on metal‐organic frameworks (MOFs) that catalyze the oxidation of HMF to FDCA in the absence of base. Several catalysts are prepared by immobilizing pre‐synthesized Pt nanoparticles on supports, allowing for the investigation of the role of the supports without the influence of the size of Pt nanoparticles (Pt NPs). By analyzing the catalytic performances along with the electronic properties using X‐ray photoelectron spectroscopy and surface properties of the catalysts using in situ infrared spectroscopy of adsorbed CO2, we find that the presence of Pt NPs in the metallic phase and basic hydroxyl groups on the support promote the HMF oxidation.

Regio‐ and Chemoselectivity of Tandem N‐Ketoalkylation/Cyclization of 2‐Thioxoimidazoline‐4‐One

AbstractThe reaction of 2‐thioxoimidazolidin‐4‐one (thiohydantoin) with aliphatic, aromatic and heteroaromatic α‐iodomethylketones has been investigated in the absence of bases or catalysts. The reaction proceeds as N‐alkylation with subsequent intramolecular dehydrative cyclization. A series of new mono‐ and fused bicyclic iodide and triiodide salts was obtained based on the 5‐oxo‐2‐thioxoimidazolidin‐1‐ium and imidazo[2,1‐b]thiazolium cations. The observed regioselectivity has been rationalized and the mechanism was proposed.

Formic acid stability in different solvents by DFT calculations.

New technologies have been developed toward the use of green energies. The production of formic acid (FA) from carbon dioxide (CO[Formula: see text]) hydrogenation with H[Formula: see text] is a sustainable process for H[Formula: see text] storage. However, the FA adduct stabilization is thermodynamically dependent on the type of solvent and thermodynamic conditions. The results suggest a wide range of dielectric permittivity values between the dimethyl sulfoxide (DMSO) and water solvents to stabilize the FA in the absence of base. The thermodynamics analysis and the infrared and charge density difference results show that the formation of the FA complex with H[Formula: see text]O is temperature dependent and has a major influence on aqueous solvents compared to the FA adduct with amine, in good agreement with the experiment. In these conditions, the stability thermodynamic of the FA molecule may be favorable at non-organic solvents and dielectric permittivity values closer to water. Therefore, a mixture of aqueous solvents with possible ionic composition could be used to increase the thermodynamic stability of H[Formula: see text] storage in CO[Formula: see text] conversion processes. Using the Quantum ESPRESSO package, density functional theory (DFT) calculations were performed with periodic boundary conditions, and the electronic wave functions were expanded in plane waves. For the exchange-correlation functional, we use the vdW-DF functional with the inclusion of van der Waals (vdW) forces. Electron-ion interactions are treated by the projector augmented wave (PAW) method with pseudopotentials available in the PSlibrary repository. The wave functions and the electronic densities were expanded employing accurate cut-off energies of 6.80[Formula: see text]10[Formula: see text] and 5.44[Formula: see text]10[Formula: see text] eV, respectively. The electronic density was computed from the wave functions calculated at the [Formula: see text]-point in the first Brillouin-zone. Each structural optimization was minimized according to the Broyden-Fletcher-Goldfarb-Shanno (BFGS) algorithm, with force and energy convergence criteria of 25 meV[Formula: see text]Å[Formula: see text] and 1.36 meV, respectively. The electrostatic solvation effects were performed by the [Formula: see text] package with the Self-Consistent Continuum Solvation (SCCS) approach.

Catalysis via bimetallic Pd-Sn nanoparticles: green oxidation of secondary benzyl alcohol in water in the absence of base

Catalysis via bimetallic Pd-Sn nanoparticles: green oxidation of secondary benzyl alcohol in water in the absence of base

Mechanochemical Rhodium-Catalyzed C-H Bond Amidation of Ferrocenes by Ball Milling.

A direct protocol for Rh-catalyzed C-H amidation of ferrocenes in a ball mill using dioxazolones as the amide source under solvent-free conditions was developed. The corresponding ortho-aminated products were formed in 3 hours and the yields were up to 99% in the absence of base. This method could be a typically sustainable and environmental-friendly alternative method to traditional methodologies, with the advantages of wide substrate range, good functional group tolerance and gram-scale synthesis.

2-Amino-1,3-benzothiazole: Endo N-Alkylation with α-Iodo Methyl Ketones Followed by Cyclization.

Reactions of 2-amino-1,3-benzothiazole with aliphatic, aromatic and heteroaromatic α-iodoketones in the absence of bases or catalysts have been studied. The reaction proceeds by N-alkylation of the endocyclic nitrogen atom followed by intramolecular dehydrative cyclization. The regioselectivity is explained and the mechanism of the reaction is proposed. A number of new linear and cyclic iodide and triiodide benzothiazolium salts have been obtained and their structure proved by NMR and UV spectroscopy.

Active Pd Catalyst for the Selective Synthesis of Methylated Amines with Methanol.

Selective N-methylation of amines with methanol is an important reaction in the synthesis of high-value-added fine chemicals, including dyes, surfactants, pharmaceuticals, agrochemicals, and materials. However, N-methylated amines possess higher reactivities and are prone to further transform into N,N-dimethylated amines. Therefore, it is still a challenge to controllably regulate the selectivity of N-methylation using heterogeneous catalysts without the use of base. Herein, we developed a series of Pd/Zn(Al)O catalysts with abundant basic sites, and the selectivity of N-methylation was controlled by a heterogeneous Pd/Zn(Al)O catalyst with a Zn/Al ratio of 10 and a Pd loading of 0.4 wt % in the pressure of H2. The experimental results showed that the appropriate basic properties of the catalyst were beneficial to form the desired N-methylated amine. The low loading of Pd in the catalyst was highly dispersed on the support, providing sufficient active sites. These were attributed to the Zn vacancies formed by Al-doped Zn, which were beneficial to form the highly active and stable Pd sites. Furthermore, a series of amines and nitrobenzenes with different functional groups were well tolerated for the selective synthesis of N-methylated amines in the absence of base.

Iodine-mediated photoinduced tuneable disulfonylation and sulfinylsulfonylation of alkynes with sodium arylsulfinates.

An efficient transition-metal free iodine-mediated tuneable disulfonylation and sulfinylsulfonylation of alkynes with sodium arylsulfinates under visible light irradiation has been developed. This photochemical protocol offers broad substrate scope of 1,2-bissulfonylethenes with high functional group tolerance and good yields under mild reaction conditions. In addition, it was found that β-sulfinyl alkenylsulfones can be obtained in the absence of base. It is proposed that the reactions proceed via sulfonyl and sulfinyl radicals.

Copper-catalyzed umpolung Sonogashira-type coupling of arene boronic acids under visible light.

We report herein that a copper catalyst catalyzed efficient cross-coupling of aryl and alkenyl boronic acids with alkynyl-1,2-benziodoxol-3(1H)-ones to afford diaryl alkynes and enynes under mild visible light irradiation conditions using a catalytic amount of base or even in the absence of base. The reaction applies copper as the catalyst and tolerates a variety of functional moieties including aryl bromide and iodide.

IrI(η4-diene) precatalyst activation by strong bases: formation of an anionic IrIII tetrahydride.

The reaction between [IrCl(COD)]2 and dppe in a 1 : 2 ratio was investigated in detail under three different conditions. [IrCl(COD)(dppe)], 1, is formed at room temperature in the absence of base. In the presence of a strong base at room temperature, hydride complexes that retain the carbocyclic ligand in the coordination sphere are generated. In isopropanol, 1 is converted into [IrH(1,2,5,6-η2:η2-COD)(dppe)] (2) on addition of KOtBu, with k12 = (1.11 ± 0.02) × 10-4 s-1, followed by reversible isomerisation to [IrH(1-κ-4,5,6-η3-C8H12)(dppe)] (3) with k23 = (3.4 ± 0.2) × 10-4 s-1 and k32 = (1.1 ± 0.3) × 10-5 s-1 to yield an equilibrium 5 : 95 mixture of 2 and 3. However, when no hydride source is present in the strong base (KOtBu in benzene or toluene), the COD ligand in 1 is deprotonated, followed by β-H elimination of an IrI-C8H11 intermediate, which leads to complex [IrH(1-κ-4,5,6-η3-C8H10)(dppe)] (4) selectively. This is followed by its reversible isomerisation to 5, which features a different relative orientation of the same ligands (k45 = (3.92 ± 0.11) × 10-4 s-1; k5-4 = (1.39 ± 0.12) × 10-4 s-1 in C6D6), to yield an equilibrated 32 : 68 mixture of 4 and 5. DFT calculations assisted in the full rationalization of the selectivity and mechanism of the reactions, yielding thermodynamic (equilibrium) and kinetic (isomerization barriers) parameters in excellent agreement with the experimental values. Finally, in the presence of KOtBu and isopropanol at 80 °C, 1 is transformed selectively to K[IrH4(dppe)] (6), a salt of an anionic tetrahydride complex of IrIII. This product is also selectively generated from 2, 3, 4 and 5 and H2 at room temperature, but only when a strong base is present. These results provide an insight into the catalytic action of [IrCl(COD)(LL)] complexes in the hydrogenation of polar substrates in the presence of a base.

Integrated Infrared Radiation Characteristics of Aircraft Skin and the Exhaust Plume.

Infrared radiation (IR) characteristics are important parameters for detecting, identifying, and striking military targets in the context of systematic countermeasures. Accurate calculation of IR characteristics for aircraft is significant for the simulation of war situations and the designation of combat strategy. In this work, integrated IR characteristics of aircraft skin and exhaust plume and their interaction are investigated by considering the reflection based on a bi-directional reflectance distribution function and various influence factors such as solar irradiation, ground reflection, aerodynamic heating, and projection radiation from the background. Combined with infrared emission and reflection characteristics of the skin, omnidirectional IR intensity distributions of 3-5 μm and 8-14 μm at different Mach numbers are obtained. The exhaust plume IR characteristic for different waves and wavebands are also investigated by considering the presence or absence of base and the difference in nozzle inlet temperature. On this basis, integrated IR characteristics between the skin and exhaust plume are investigated. Results show that aircraft IR characteristics of 3-5 μm are concentrated in the exhaust plume and high-temperature skin near the exhaust plume, while the signals of 8-14 μm are concentrated in the skin. The research results are expected to supply guidance for better detection and identification of typical flight targets.

Base-Free Catalytic Hydrogen Production from Formic Acid Mediated by a Cubane-Type Mo3S4 Cluster Hydride.

Formic acid (FA) dehydrogenation is an attractive process in the implementation of a hydrogen economy. To make this process greener and less costly, the interest nowadays is moving toward non-noble metal catalysts and additive-free protocols. Efficient protocols using earth abundant first row transition metals, mostly iron, have been developed, but other metals, such as molybdenum, remain practically unexplored. Herein, we present the transformation of FA to form H2 and CO2 through a cluster catalysis mechanism mediated by a cuboidal [Mo3S4H3(dmpe)3]+ hydride cluster in the absence of base or any other additive. Our catalyst has proved to be more active and selective than the other molybdenum compounds reported to date for this purpose. Kinetic studies, reaction monitoring, and isolation of the [Mo3S4(OCHO)3(dmpe)3]+ formate reaction intermediate, in combination with DFT calculations, have allowed us to formulate an unambiguous mechanism of FA dehydrogenation. Kinetic studies indicate that the reaction at temperatures up to 60 °C ends at the triformate complex and occurs in a single kinetic step, which can be interpreted in terms of statistical kinetics at the three metal centers. The process starts with the formation of a dihydrogen-bonded species with Mo-H···HOOCH bonds, detected by NMR techniques, followed by hydrogen release and formate coordination. Whereas this process is favored at temperatures up to 60 °C, the subsequent β-hydride elimination that allows for the CO2 release and closes the catalytic cycle is only completed at higher temperatures. The cycle also operates starting from the [Mo3S4(OCHO)3(dmpe)3]+ formate intermediate, again with preservation of the cluster integrity, which adds our proposal to the list of the infrequent cluster catalysis reaction mechanisms.

Catalyst-Free C(sp2)-H Borylation through Aryl Radical Generation from Thiophenium Salts via Electron Donor-Acceptor Complex Formation.

Aryl borates lie at the heart of carbon-carbon bond couplings, and they are widely applied to the synthesis of functional materials, pharmaceutical compounds, and natural products. Currently, synthetic methods for aryl borates are mostly limited to metal-catalyzed routes, and nonmetallic strategies remain comparatively underdeveloped. Herein, we report a mild, scalable, visible-light-induced cross-coupling between aryl dibenzothiophenium triflate salts and bis(catecholato)-diboron for the construction of C-B bonds in the absence of base, transition metal-ligand complex, or photoredox catalyst. Mechanistic studies reveal that this transformation is achieved through an electron donor-acceptor (EDA) complex activation in the absence of a catalyst. The mild reaction conditions allow the preparation of aromatic borates in good yields with excellent functional group tolerance. This photochemical protocol was also successfully applied to the late-stage modification of natural products and the synthesis of a drug intermediate, greatly demonstrating broadened utility.

Rhodium‐Catalyzed Benzylic Addition Reactions of Alkylarenes to Michael Acceptors

The use of alkylarenes as nucleophile precursors in benzylic addition is challenging because the benzylic hydrogen atoms of these compounds are inert to deprotonation. Herein, we report Rh-catalyzed benzylic addition of alkylarenes to Michael acceptors for the formation of C(sp3 )-C(sp3 ) bonds. The catalyst is proposed to activate the aromatic ring via η6 -coordination, dramatically facilitating deprotonation of the unactivated benzylic C-H bond and addition of the resulting carbanion to the α,β-unsaturated double bond in the absence of bases. Notably, this byproduct-free method provides an access to all-carbon quaternary centers through the development of ligands.

Rhodium‐Catalyzed Benzylic Addition Reactions of Alkylarenes to Michael Acceptors

AbstractThe use of alkylarenes as nucleophile precursors in benzylic addition is challenging because the benzylic hydrogen atoms of these compounds are inert to deprotonation. Herein, we report Rh‐catalyzed benzylic addition of alkylarenes to Michael acceptors for the formation of C(sp3)−C(sp3) bonds. The catalyst is proposed to activate the aromatic ring via η6‐coordination, dramatically facilitating deprotonation of the unactivated benzylic C−H bond and addition of the resulting carbanion to the α,β‐unsaturated double bond in the absence of bases. Notably, this byproduct‐free method provides an access to all‐carbon quaternary centers through the development of ligands.

Olefination with Sulfonyl Halides and Esters: Synthesis of Unsaturated Sulfonyl Fluorides.

Methanedisulfonyl fluoride, CH2(SO2F)2, transforms aromatic aldehydes into β-arylethenesulfonyl fluorides, useful substrates for the SuFEx “click”-type transformations. The reaction mimics mechanism of the Horner–Wadsworth–Emmons olefination, which runs via addition of the carbanion, followed by cyclization–fragmentation of the four-membered ring intermediate. In the absence of base, electron-rich aldehydes follow an alternative pathway of the Knoevenagel condensation to provide unsaturated 1,1-disulfonyl fluorides. We demonstrate also trapping of elusive ethene-1,1-disulfonyl fluoride, CH2=C(SO2F)2, with 4-(dimethylamino)pyridine (DMAP) that forms zwitterionic adduct, characterized with X-ray studies.

In Situ Monitoring of Transmetallation in Electric Potential-Promoted Oxidative Coupling in a Single-Molecule Junction

In Situ Monitoring of Transmetallation in Electric Potential-Promoted Oxidative Coupling in a Single-Molecule Junction

Selective glycerol oxidation to glyceric acid under mild conditions using Pt/CeO2–ZrO2–Fe2O3/SBA-16 catalysts

ABSTRACT Effective glyceric acid production from glycerol was demonstrated under mild conditions in an open-air system at room temperature in the absence of base or oxygen gas flow by employing a Pt/CeO2–ZrO2–Fe2O3/Santa Barbara Amorphous No. 16 (SBA-16) catalyst. At a low loading amount of CeO2–ZrO2–Fe2O3 (16 wt%Ce0.64Zr0.16Fe0.20O2−δ/SBA-16), the oxygen release and storage abilities and high acidity of the catalyst afforded a high glyceraldehyde yield, owing to the enhancement of the oxidation ability of the Pt activator and the acceleration of the desorption of glyceraldehyde. The increase in CeO2–ZrO2–Fe2O3 loading amount further improved the oxygen release and storage abilities and lowered the catalyst acidity induced by crystallite growth and particle aggregation. The high oxygen release and storage abilities, as well as the low acidity, contributed to the high glyceric acid yield; the highest activity for glyceric acid production was obtained for the 7 wt%Pt/40 wt%Ce0.64Zr0.16Fe0.20O2−δ/SBA-16 catalyst. The glyceric acid yield increased up to 68.2% after 10 h of reaction in atmospheric air at 30°C.