Ab Initio Molecular Dynamics Calculations Research Articles

Revisiting thermodynamics in (LiF, NaF, KF, CrF2)–CrF3 by first-principles calculations and CALPHAD modeling

The thermodynamic description of the (LiF, NaF, KF, CrF2)–CrF3 systems has been revisited, aiming for a better understanding of the effects of Cr on the FLiNaK molten salt. First-principles calculations based on density functional theory (DFT) were performed to determine the electronic and structural properties of each compound, including the formation enthalpy, volume, and bulk modulus. DFT-based phonon calculations were carried out to determine the thermodynamic properties of compounds, for example, enthalpy, entropy, and heat capacity as functions of temperature. Phonon-based thermodynamic properties show a good agreement with experimental data of binary compounds LiF, NaF, KF, CrF3, and CrF2, establishing a solid foundation to determine thermodynamic properties of ternary compounds as well as to verify results estimated by the Neumann-Kopp rule. Additionally, DFT-based ab initio molecular dynamics (AIMD) simulations were employed to predict the mixing enthalpies of liquid salts. Using DFT-based results and experimental data in the literature, the (LiF, NaF, KF, CrF2)–CrF3 system has been remodeled in terms of the CALculation of PHAse Diagrams (CALPHAD) approach using the modified quasichemical model with quadruplet approximation (MQMQA) for liquid. Calculated phase stability in the present work shows an excellent agreement with experiments, indicating the effectiveness of combining DFT-based total energy, phonon, and AIMD calculations, and CALPHAD modeling to provide the thermodynamic description in complex molten salt systems.

Defect Engineering for Enhanced Electrocatalytic Oxygen Reaction on Transition Metal Oxides: The Role of Metal Defects.

Metal defect engineering is a highly effective strategy for addressing the prevalent high overpotential issues associated with transition metal oxides functioning as dual-function commercial oxygen reduction reaction/oxygen evolution reaction catalysts for increasing their activity and stability. However, the high formation energy of metal defects poses a challenge to the development of strategies to precisely control the selectivity during metal defect formation. Here, density functional theory calculations are used to demonstrate that altering the pathway of metal defect formation releases metal atoms as metal chlorides, which effectively reduces the formation energy of defects. The metal defects on the monometallic metal oxide surface (Mn, Fe, Co, and Ni) are selectively produced using chlorine plasma. The characterization and density functional theory calculations reveal that catalytic activity is enhanced owing to electronic delocalization induced by metal defects, which reduces the theoretical overpotential. Notably, ab initio molecular dynamics calculations, ex situ XPS, and in situ ATR-SEIRAS suggest that metal defects effectively improve the adsorption of reactive species on active sites and enhance the efficiency of product desorption, thereby boosting catalytic performance.

Semimetallic state transition in Two-Dimensional carbon nitride covalent networks and enhanced electrocatalytic activity for nitrate to ammonia conversion

Single-atom catalysts (SACs), due to their maximum atomic utilization rate, show tremendous potential for application in the electrocatalytic synthesis of ammonia from nitrate. Yet, the development of superior supports that preserve the high selectivity, activity, and stability of SACs remains an imperative challenge. In this work, based on first-principles calculations and tight-binding (TB) model analysis, a new two-dimensional (2D) carbon nitride monolayer, C7N6, is proposed. The C7N6 structure exhibits a strong covalent network, with dynamical, thermal, and mechanical stability. Surprisingly, the structural transition from C9N4 to C7N6 corresponds to a semimetallic state transition. Further symmetry analysis unveils that the Dirac states in C7N6 are protected by space–time inversion symmetry, and the physical origin of the Dirac cone was confirmed using the TB model. Additionally, a non-zero Z2 invariant and significant topological edge states demonstrate its topologically nontrivial nature. Considering the excellent structural and topological properties of C7N6, a three-step screening strategy is designed to identify eligible SACs for electrochemical nitrate reduction reaction (NO3RR), and Ti@C7N6 is identified as possessing the best activity, with the last proton-electron coupling step *NH2→*NH3 being the potential-determining step (PDS), for which the limiting potential is 0.48 V. Moreover, a free energy diagram shows that the *NOH reaction pathway is energetically preferred on Ti@C7N6, and ab initio molecular dynamics (AIMD) calculations at 500 K confirm its good thermal stability. Our study not only provides excellent CN-based support material but also offers theoretical guidance for constructing highly active and selective SACs for nitrate reduction.

High-pressure structures of solid hydrogen: Insights from abinitio molecular dynamics simulations.

Understanding the structural behavior of solid hydrogen under high pressures is crucial for uncovering its unique properties and potential applications. In this study, starting from the phase I of solid hydrogen-free-rotator hcp structure, we conduct extensive abinitio molecular dynamics calculations to simulate the cooling, heating, and equilibrium processes within a pressure range of 80-260GPa. Without relying on any structure previously predicted, we identify the high-pressure phase structures of solid hydrogen as P21/c for phase II, P6522 for phase III, and BG1BG2BG3 six-layer structure for phase IV, which are different from those proposed previously using the structure-search method. The reasonability of these structures are validated by Raman spectra and x-ray diffraction patterns by comparison with the experimental results. Our results actually show pronounced changes in the c/a ratio between phases I, III, and IV, which hold no brief for the experimental interpretation of an isostructural hcp transformations for phases I-III-IV.

Phase formation mechanism of Cr2AlC MAX phase coating: In-situ TEM characterization and atomic-scale calculations

Cr2AlC, a representative MAX phase, gains increasing attention for the excellent oxidation tolerance and corrosion resistance used in harsh high temperature and strong radiation environments. However, the lack of the phase formation mechanism has become the key bottleneck to the practical applications for Cr2AlC synthesis with high purity at low temperatures. In this work, we fabricated the amorphous Cr–Al–C coating by a hybrid magnetron sputtering/cathodic arc deposition technique, in which the in-situ heating transmission electron microscopy (TEM) was conducted in a temperature range of 25–650 ℃ to address the real-time phase transformation for Cr2AlC coating. The results demonstrated that increasing the temperature from 25 to 370 ℃ led to the structural transformation from amorphous Cr–Al–C to the crystalline Cr2Al interphases. However, the high-purity Cr2AlC MAX was distinctly formed at 500 ℃, accompanied by the diminished amorphous feature. With the further increase of temperature to 650 ℃, the decomposition of Cr2AlC to Cr7C3 impurities was observed. Similar phase evolution was also evidenced by the Ab-initio molecular dynamics calculations, where the bond energy of Cr–Cr, Cr–Al, and Cr–C played the key role in the formed crystalline stability during the heating process. The observations not only provide fundamental insight into the phase formation mechanism for high-purity Cr2AlC coatings but also offer a promising strategy to manipulate the advanced MAX phase materials with high tolerance to high-temperature oxidation and heavy ion radiations.

Atomically engineered Al-doped LaOCl for chlorine-ion batteries

LaOCl belongs to one kind of promising solid electrolyte for chlorine-ion batteries due to its excellent electric insulation performance and special layered structure. However, LaOCl still suffers from poor chlorine-ion conductivity. Then, we proposed microstructure modulation of LaOCl to solve this problem based on Al doping method. Firstly, we carried out first-principles and ab-initio molecular dynamics (AIMD) calculations to investigate the internal relation among structure stability, chlorine-ion conductivity and related physicochemical properties of Al doped LaOCl(La1-xAlxOCl). It is found that La0.75Al0.25OCl not only possesses most stable structure but also demonstrates the best ductility. Moreover, La0.75Al0.25OCl also possesses much lower chlorine-ion diffusion energy barrier than LaOCl(0.40 eV vs.0.78 eV) and its chlorine-ion conductivity goes as high as 5.4 × 10−3 S/cm at 300K. This is attributed to the optimal reconstruction of La–Cl coordination structure induced by Al dopant, which weakens the limiting effect of La–Cl bond as far as possible. Meanwhile,La0.75Al0.25OCl exhibits excellent electrical insulating property due to its wide band gap of 5.87 eV. In addition, La0.75Al0.25OCl exhibits wide electrochemical window with La and Al metal acted as anode materials, respectively (1.92–9.66 V for La and 0–7.74 V for Al). At this stage, La0.75Al0.25OCl solid electrolyte requires no chlorine-ion uptake and loss in the process of oxidation and reduction, indicating its excellent electrochemical stability.

Spectroscopic visualization of reversible hydrogen spillover between palladium and metal–organic frameworks toward catalytic semihydrogenation

Hydrogen spillover widely occurs in a variety of hydrogen-involved chemical and physical processes. Recently, metal–organic frameworks have been extensively explored for their integration with noble metals toward various hydrogen-related applications, however, the hydrogen spillover in metal/MOF composite structures remains largely elusive given the challenges of collecting direct evidence due to system complexity. Here we show an elaborate strategy of modular signal amplification to decouple the behavior of hydrogen spillover in each functional regime, enabling spectroscopic visualization for interfacial dynamic processes. Remarkably, we successfully depict a full picture for dynamic replenishment of surface hydrogen atoms under interfacial hydrogen spillover by quick-scanning extended X-ray absorption fine structure, in situ surface-enhanced Raman spectroscopy and ab initio molecular dynamics calculation. With interfacial hydrogen spillover, Pd/ZIF-8 catalyst shows unique alkyne semihydrogenation activity and selectivity for alkynes molecules. The methodology demonstrated in this study also provides a basis for further exploration of interfacial species migration.

Vibrational signatures of dynamic excess proton storage between primary amine and carboxylic acid groups.

Ammonium and carboxylic moieties play a central role in proton-mediated processes of molecular recognition, charge transfer or chemical change in (bio)materials. Whereas both chemical groups constitute acid-base pairs in organic salt-bridge structures, they may as well host excess protons in acidic environments. The binding of excess protons often precedes proton transfer reactions and it is therefore of fundamental interest, though challenging from a quantum chemical perspective. As a benchmark for this process, we investigate proton storage in the amphoteric compound 5-aminovaleric acid (AV), within an intramolecular proton bond shared by its primary amine and carboxylic acid terminal groups. Infrared ion spectroscopy is combined with abinitio Molecular Dynamics (AIMD) calculations to expose and rationalize the spectral signatures of protonated AV and its deuterated isotopologues. The dynamic character of the proton bond confers a fluxional structure to the molecular framework, leading to wide-ranging bands in the vibrational spectrum. These features are reproduced with remarkable accuracy by AIMD computations, which serves to lay out microscopic insights into the excess proton binding scenario.

Understanding the Electron Beam Resilience of Two-Dimensional Conjugated Metal-Organic Frameworks.

Knowledge of the atomic structure of layer-stacked two-dimensional conjugated metal-organic frameworks (2D c-MOFs) is an essential prerequisite for establishing their structure-property correlation. For this, atomic resolution imaging is often the method of choice. In this paper, we gain a better understanding of the main properties contributing to the electron beam resilience and the achievable resolution in the high-resolution TEM images of 2D c-MOFs, which include chemical composition, density, and conductivity of the c-MOF structures. As a result, sub-angstrom resolution of 0.95 Å has been achieved for the most stable 2D c-MOF of the considered structures, Cu3(BHT) (BHT = benzenehexathiol), at an accelerating voltage of 80 kV in a spherical and chromatic aberration-corrected TEM. Complex damage mechanisms induced in Cu3(BHT) by the elastic interactions with the e-beam have been explained using detailed ab initio molecular dynamics calculations. Experimental and calculated knock-on damage thresholds are in good agreement.

Interfacial Electronic States of GeC/g-C3N4 van der Waal Heterostructure with Promising Photocatalytic Activity via Hydrogenation.

The bandgap of most known two-dimensional materials can be tuned by hydrogenation, although certain 2D materials lack a sufficient wide bandgap. Currently, it would be perfect to design non-toxic, low-cost, and high-performance photocatalysts for photocatalytic water splitting via hydrogenation. We systematically examine the impact of hydrogenation on the optical and electronic characteristics of GeC/g-C3N4 vdW heterostructures (vdWHs) with four different stacking patterns using first-principles calculations. The phonon spectra, interlayer distance, binding energies and ab initio molecular dynamics calculations show the kinetic, mechanical, and thermal stability of GeC/g-C3N4 vdWH after hydrogenation at 300, 500 and 800 K and possesses anisotropic Poisson's ratio, Young's and bulk modulus, suggesting that it's a promising candidate for experimental fabrication. According to an investigation of its electronic properties, GeC/g-C3N4 vdWH has a bandgap of 1.28 eV, but hydrogenation dramatically increases it to 2.47 eV. As a result of interface-induced electronic doping, the electronic states in g-C3N4 might be significantly adjusted by coming into contact with hydrogenated GeC sheets. The vdWH exhibits a type-II semiconductor, which can enhance the spatial separation of electron-hole pairs and has a strong red-shift of absorption coefficient than those of the constituent monolayers. The high potential drop caused by the significant valence and conduction band offsets effectively separated the charge carriers. The absorption coefficient of GeCH2/g-C3N4 vdWH is highly influenced by a biaxial compressive strain more than the biaxial tensile strain. Our theoretical research implies that the hydrogenated GeCH2/g-C3N4 vdWH possesses tunable optical and electronic behaviour for use as a hole-transport material in solar energy harvesting, nanoelectronic and optoelectronic devices.

Atomic transport properties of water in barium–strontium aluminosilicates: Coupling of reactions and diffusion

AbstractBarium–strontium aluminosilicate (BSAS), with excellent resistance to water vapor corrosion and low water permeability, is considered an ideal environmental barrier coating material. Water vapor plays an important role on the failure of BSAS when it is exposed to service environments. Herein, the atomic transport properties of water in BSAS are investigated using ab initio calculations. The metastable structure of water in BSAS mainly consists of hydroxyl group and H+, where the hydroxyl group mainly exists in the form of Al–OH structure. In BSAS crystals, water first reacts with the aluminosilicate network to form metastable hydroxyl group and H+, and then hydroxyl group and H+ diffuse through the aluminosilicate network. Alkaline earth elements limit the diffusion behavior of water and improve the resistance to water vapor corrosion by maintaining the desired local charge balance of the Al–O4 tetrahedron structure. Furthermore, the ab initio molecular dynamics calculations at service temperature and pressure of BSAS are carried out to verify the above conclusions.

Defect-Assisted Exciton Transfer across the Tetracene-Si(111):H Interface.

Exciton transfers are ubiquitous and extremely important processes, but often poorly understood. A recent example is the triplet exciton transfer in tetracene sensitized silicon solar cells exploited for harvesting high-energy photons. The present abinitio molecular dynamics calculations for tetracene-Si(111):H interfaces show that Si dangling bonds, intuitively expected to hinder the exciton transfer, actually foster it. This suggests that defects and structural imperfections at interfaces may be exploited for excitation transfer.

Transitioning from Methanol to Olefins (MTO) toward a Tandem CO2 Hydrogenation Process: On the Role and Fate of Heteroatoms (Mg, Si) in MAPO-18 Zeotypes.

The tandem CO2 hydrogenation to hydrocarbons over mixed metal oxide/zeolite catalysts (OXZEO) is an efficient way of producing value-added hydrocarbons (platform chemicals and fuels) directly from CO2via methanol intermediate in a single reactor. In this contribution, two MAPO-18 zeotypes (M = Mg, Si) were tested and their performance was compared under methanol-to-olefins (MTO) conditions (350 °C, PCH3OH = 0.04 bar, 6.5 gCH3OH h-1 g-1), methanol/CO/H2 cofeed conditions (350 °C, PCH3OH/PCO/PH2 = 1:7.3:21.7 bar, 2.5 gCH3OH h-1 g-1), and tandem CO2 hydrogenation-to-olefin conditions (350 °C, PCO2/PH2 = 7.5:22.5 bar, 1.4-12.0 gMAPO-18 h molCO2-1). In the latter case, the zeotypes were mixed with a fixed amount of ZnO:ZrO2 catalyst, well-known for the conversion of CO2/H2 to methanol. Focus was set on the methanol conversion activity, product selectivity, and performance stability with time-on-stream. In situ and ex situ Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), solid-state nuclear magnetic resonance (NMR), sorption experiments, and ab initio molecular dynamics (AIMD) calculations were performed to correlate material performance with material characteristics. The catalytic tests demonstrated the better performance of MgAPO-18 versus SAPO-18 at MTO conditions, the much superior performance of MgAPO-18 under methanol/CO/H2 cofeeds, and yet the increasingly similar performance of the two materials under tandem conditions upon increasing the zeotype-to-oxide ratio in the tandem catalyst bed. In situ FT-IR measurements coupled with AIMD calculations revealed differences in the MTO initiation mechanism between the two materials. SAPO-18 promoted initial CO2 formation, indicative of a formaldehyde-based decarboxylation mechanism, while CO and ketene were the main constituents of the initiation pool in MgAPO-18, suggesting a decarbonylation mechanism. Under tandem CO2 hydrogenation conditions, the presence of high water concentrations and low methanol partial pressure in the reaction medium led to lower, and increasingly similar, methanol turnover frequencies for the zeotypes. Despite both MAPO-18 zeotypes showing signs of activity loss upon storage due to the interaction of the sites with ambient humidity, they presented a remarkable stability after reaching steady state under tandem reaction conditions and after steaming and regeneration cycles at high temperatures. Water adsorption experiments at room temperature confirmed this observation. The faster activity loss observed in the Mg version is assigned to its harder Mg2+-ion character and the higher concentration of CHA defects in the AEI structure, identified by solid-state NMR and XRD. The low stability of a MgAPO-34 zeotype (CHA structure) upon storage corroborated the relationship between CHA defects and instability.

Electron-Phonon Coupling-Mediated Ultralong Carrier Lifetime in an All-Inorganic Two-Dimensional Cs2PbI2Cl2 Perovskite: Explanation for the High Antisite Defect Tolerance.

Two-dimensional (2D) halide perovskite are appealing candidates for applications in optoelectronics and photovoltaics, but their energy conversion efficiency is severely limited by nonradiative electron-hole recombination. In most investigations, point defects with deep defect levels and deep charge-state transition levels in the band gap are treated as the carrier recombination centers. For the all-inorganic 2D Css 2PbI2Cl2, the IPb antisite defect is the most likely to form and cause nonradiative electron-hole recombination. By using density functional theory and ab initio nonradiative molecular dynamics calculations, we found that the IPb defect can introduce the deep acceptor and donor levels into the band gap. Because electron-phonon coupling gives rise to weak nonadiabatic coupling and rapid loss of electronic coherence, those levels lead to a reduction of the carrier loss and the prolongation of the excited-state carrier lifetime, thereby enhancing the photoelectric and defect tolerance properties of the Cs2PbI2Cl2 material. These results could deepen the understanding of the chemistry of defects and carrier dynamics in perovskite materials.

Monitoring the Evolution of Relative Product Populations at Early Times during a Photochemical Reaction.

Identifying multiple rival reaction products and transient species formed during ultrafast photochemical reactions and determining their time-evolving relative populations are key steps toward understanding and predicting photochemical outcomes. Yet, most contemporary ultrafast studies struggle with clearly identifying and quantifying competing molecular structures/species among the emerging reaction products. Here, we show that mega-electronvolt ultrafast electron diffraction in combination with ab initio molecular dynamics calculations offer a powerful route to determining time-resolved populations of the various isomeric products formed after UV (266 nm) excitation of the five-membered heterocyclic molecule 2(5H)-thiophenone. This strategy provides experimental validation of the predicted high (∼50%) yield of an episulfide isomer containing a strained three-membered ring within ∼1 ps of photoexcitation and highlights the rapidity of interconversion between the rival highly vibrationally excited photoproducts in their ground electronic state.

Multiscale understand the tuning photocatalytic hydrogen evolution performances of BiOCl stemmed from engineered crystal facet

BiOCl photocatalyst has been extensively investigated due to unique internal electric field. However, the limited photocatalytic efficiency seriously blocks the further development of this photocatalyst. Here, using one-step hydrothermal process, we prepared the octagonal plate BiOCl, which is characterized with (110) facets. Contrasted with the ordinary BiOCl with (010) and (001) facets, the designed BiOCl-110 exbibits approximately 1.70 times and 3.15 times enhancement in photocatalytic H2 evolution, along with qualified reusability. The experimental findings collectively uncover the origin of high hydrogen production, which (110) facet greatly prolongs the lifetime of carriers, sharply increases the surface photovoltage and reasonably optimizes the carrier transport. Particularly, density functional theory simulations unveil a remarkably reduced transition between valence band maximum and conduction band minimum within BiOCl-110, resulting in a largely increased carrier extraction. Besides, the optimized free energy barriers of intermediates yield proper adsorption and desorption process in overall H2O splitting. Further ab initio molecular dynamics calculations unlock that the distinctive atomic structure on surface of the octagonal plate BiOCl serves as the inherent factor in regulating the element distribution of H2O layer on photocatalyst surface. The facet-dependent electronic structure and facet/H2O interface effects offer crucial understanding for BiOCl in highly effective hydrogen evolution.

Adsorption of chemical species onto nanographenes, pristine coronene and anchored systems as coronene−(TiO2)nn=1–4: Insights from ab initio molecular dynamics calculations

DFT (Density Functional Theory) calculations were carried out to evaluate the chemical interaction of CO (carbon monoxide) and NO (nitrogen monoxide) molecules onto nanographenes (NGs) n = 1–6 units; thus, for this range adsorption process is exhibited, excepting for n = 5 desorption is favored. On the other hand, dioxide titanium clusters (TiO2) n = 1–4 were proposed to adsorb CO molecule, atop and parallel adsorption sites were considered to attach CO molecule onto these clusters and four possible isolated models (C1-C4) are generated and as result of this chemical interaction, physisorption was obtained. In order to improve the adsorption of CO molecule, (TiO2)n−CO clusters are deposited onto (NG)2 to play the role as substrate, namely coronene (C) and then a set of nanocomposites are generated to analyze changes on adsorption tendency, for the above systems just CO molecule is considered. Some chemical and structural transition are obtained for largest sizes as well as adsorption energy values are more favored for C−(TiO2)3−CO system due to the close proximity between titanium atom of C-(TiO2)3 clusters and this chemical specie. Therefore, there are substantial chemisorption values in this instance due to the active sites. The values of the electronic gap do not exhibit significant variations, among these nanocomposites, however, the HOMO isosurfaces are shown in distinct ways, and for n ≤ 2 systems examined in this paper, LUMO isosurfaces are displayed at the center of the cluster. In all systems analyzed, the electronic transference goes from chemical species toward atoms at the adsorption site. These results suggest that these C−(TiO2)n nanocomposites are ideal candidates to storing or sense different sort of gases; thereby, these findings can be employed to design a kind of gases storage device for environmentally friendly energy applications.

A novel class of multivalent ionic conductors with the La3CuSiS7 structure type: results of stepwise ICSD screening.

The results of high-throughput screening of the inorganic crystal structure database for new promising Ca2+-, Mg2+-, Zn2+- and Al3+-ion conducting ternary and quaternary sulfides, selenides, and tellurides are presented (∼1500 compounds). A geometrical-topological approach based on the Voronoi partition was initially used and yielded 104 compounds, which were unknown as conductors with possible cation migration. All compounds were passed through the bond valence site energy analysis to determine the migration energy Em. Furthermore, we established the logarithmic dependencies of Em on the geometrical parameters of the migration pathways. As a result, 16 out of 104 structures were filtered out as promising conductors. Finally, density functional theory simulations yielded the 11 most prospective compounds with Em < 1.0 eV. Among them, we found a novel class of ionic conductors with the La3CuSiS7 structure, for which ab initio molecular dynamic calculations were performed, revealing diffusion coefficients of ∼10-7 cm2 s-1 and ionic conductivity of ∼10-2 S cm-1 at 300 K.

Mechanism of ionic dissociation of HCl in the smallest water clusters.

The dissociation of strong acids into water is a fundamental process in chemistry and biology. Determining the minimum number of water molecules that can result in an ionic dissociation of hydrochloric acid (HCl → H+ + Cl-) remains a challenging subject. In this study, the reactions of H2O with HCl(H2O)n-1 (HCl-H2O cluster), i.e., HCl(H2O)n-1 + H2O (n = 3-7), were investigated by using the direct ab initio molecular dynamics (AIMD) method. Direct AIMD calculations were performed to set the collision energy of H2O to zero for all trajectories. For n = 3, no reaction occurred. In contrast, HCl dissociated to H+ + Cl- at n = 4, forming a contact ion pair (cIP) and solvent-separated ion pair (ssIP) as products. The reactions were expressed as HCl(H2O)3 + H2O → H3O+(H2O)2Cl- (ssIP), and HCl(H2O)3 + H2O → H3O+(Cl-)(H2O)2 (cIP). The ion pair (IP) products were dependent on the collision site of H2O relative to HCl(H2O)3. For n = 5-7, both IPs were formed through the reaction between H2O and HCl(H2O)n-1 (n = 5-7). The reaction between HCl and (H2O)4 (HCl + (H2O)4 → HCl(H2O)4) was non-reactive in IP formation. The reaction mechanism was discussed based on the theoretical results.

The electron-rich [ZnH]+ species stabilized by titanium silicalite-1 zeolite for propane dehydrogenation

Propane dehydrogenation to propylene has broad application prospects, so it is of great significance to explore low-cost and environmentally friendly catalysts. Metal hydrides, as active sites, exhibit excellent dehydrogenation property. Herein, we report titanium modified [ZnH]+ ([ZnH]+···TiO6) site with high activity (14.49 mmolC3H6·gcat−1·h−1) and regeneration performance, which is derived from the in-situ conversion of [ZnOH]+ in the dehydrogenation reaction. Combined with in-situ spectroscopic characterizations and ab initio molecular dynamics (AIMD) simulations, the unique [ZnH]+···TiO6 moiety was confirmed, and the evolution process from [ZnOH]+ to [ZnH]+ was clarified. XPS and AIMD calculations show that Zn in the [ZnH]+···TiO6 structure is in an electron-rich state with high H-affinity, which can effectively reduce the propyl C-H cleavage barriers based on slow-growth simulations. In general, titanium modification can effectively stabilize the [ZnH]+ species and enrich the electrons density of zinc, which contribute to the enhanced PDH performance.