Α-helical Peptides Research Articles

Enhanced Antibacterial, Anti-Inflammatory, and Antibiofilm Activities of Tryptophan-Substituted Peptides Derived from Cecropin A-Melittin Hybrid Peptide BP100

The emergence of multidrug-resistant pathogens necessitates the development of novel antimicrobial agents. BP100, a short α-helical antimicrobial peptide (AMP) derived from cecropin A and melittin, has shown promise as a potential therapeutic. To enhance its efficacy, we designed and synthesized 16 tryptophan-substituted BP100 analogs based on helical wheel projections. Among these, BP5, BP6, BP8, BP11, and BP13 exhibited 1.5- to 5.5-fold higher antibacterial activity and improved cell selectivity compared to BP100. These analogs demonstrated superior efficacy in suppressing pro-inflammatory cytokine release in LPS-stimulated RAW 264.7 cells and eradicating preformed biofilms of multidrug-resistant Pseudomonas aeruginosa (MDRPA). Additionally, these analogs showed greater resistance to physiological salts and serum compared to BP100. Mechanistic studies revealed that BP100 and its analogs exert their antibacterial effects through membrane disruption, depolarization, and permeabilization. Notably, these analogs showed synergistic antimicrobial activity with ciprofloxacin against MDRPA. Our findings suggest that these tryptophan-substituted BP100 analogs represent promising candidates for combating multidrug-resistant bacterial infections, offering a multifaceted approach through their antibacterial, anti-inflammatory, and antibiofilm activities.

Development of α-Helical Antimicrobial Peptides with Imperfect Amphipathicity for Superior Activity and Selectivity.

The advancement of antimicrobial peptides (AMPs) as therapeutic agents is hindered by their poor selectivity. Recent evidence indicates that controlled disruption of the amphipathicity of α-helical AMPs may increase the selectivity. This study investigated the role of imperfect amphipathicity in optimizing AMPs with varied sequences to enhance their activity and selectivity. Among these, the lead peptide RI-18, characterized by an imperfectly amphipathic α-helical structure, demonstrated potent and broad-spectrum antibacterial activity without inducing hemolytic or cytotoxic effects. RI-18 effectively eliminated planktonic and biofilm-associated bacteria as well as persister cells and exhibited high bacterial plasma membrane affinity, inducing rapid membrane permeabilization and rupture. Notably, RI-18 significantly reduced bacterial loads without promoting bacterial resistance, highlighting its therapeutic potential. Overall, this study identified RI-18 as a promising antimicrobial candidate. The rational strategy of tuning imperfect amphipathicity to enhance the AMP activity and selectivity may facilitate the design and development of AMPs.

Biochemistry, Mechanistic Intricacies, and Therapeutic Potential of Antimicrobial Peptides: An Alternative to Traditional Antibiotics.

The emergence of drug-resistant strains of pathogens becomes a major obstacle to treating human diseases. Antibiotics and antivirals are in the application for a long time but now these drugs are not much effective anymore against disease-causing drugresistant microbes and gradually it is becoming a serious complication worldwide. The development of new antibiotics cannot be a stable solution to treat drug-resistant strains due to their evolving nature and escaping antibiotics. At this stage, antimicrobial peptides (AMPs) may provide us with novel therapeutic leads against drug-resistant pathogens. Structurally, antimicrobial peptides are mostly α-helical peptide molecules with amphiphilic properties that carry the positive charge (cationic) and belong to host defense peptides. These positively charged AMPs can interact with negatively charged bacterial cell membranes and may cause the alteration in electrochemical potential on bacterial cell membranes and consequently lead to the death of microbial cells. In the present study, we will elaborate on the implication of AMPs in the treatment of various diseases along with their specific structural and functional properties. This review will provide information which assists in the development of new synthetic peptide analogues to natural AMPs. These analogues will eliminate the limitations of natural AMPs like toxicity and severe hemolytic activities.

The Wheel of Fortune: Helical Wheel Alanine Scanning of a Spider Venom Antimicrobial Peptide Reveals Residues Involved in Antimicrobial and Cytotoxic Activity.

A preference for several amino acids is observed to occur at particular positions of cationic α-helical antimicrobial peptides (AMPs), which ensures the formation of amphipathic regions once they assume their correct secondary structure in membranes or membrane-mimicking environments and makes them active against pathogens. This study determined the effect of alanine mutations on the secondary structure and bioactivity of lyp1987 (GRLQAFLAKMKEIAAQTL-NH2), a cationic α-helical AMP obtained from the venom of Lycosa poonaensis which exhibits broad range activity against Gram-positive and Gram-negative bacteria with micromolar minimum inhibitory concentrations (MIC). CD spectroscopy revealed no significant difference in the secondary structure, with all alanine-substituted analogs exhibiting predominantly α-helical structure in buffered 2,2,2-trifluoroethanol solution. Alanine substitution at Glu12 and Thr17 increased the activity of lyp1987 against Gram-positive and -negative bacteria, while alanine substitution at Lys9 increased its selectivity against Gram-positive bacteria. Further investigation can be done to determine positions and substitutions that will give less cytotoxic analogs.

Enlarged Curvature, Torsion and Torque in Helical Conformations and the Stability and Growth of α-Peptide under the Isochoric and Isobaric Conditions: Variatonal Optimization

The torsional deformation behavior of an elastic bar with a circular cross-section was investigated by applying invariant dyadic analysis, where the small finite displacement functions advocated by Saint-Venant (1855) were fully employed. It was found that the previously overlooked circumferential shear force field generated by pure torsion on the side walls of a bar produces an unusual torque term induced by the skew-symmetric part of the deformation tensor and exhibits quadratic length dependence along the z-axis of the bar. The adaptation of this torque term for a helical conformation of α-peptides creates moments acting on the circular cross-sections and is directed along the surface normal of circular cross-sections, which coincides with the tangent vector of the helix. The projection of this torque along the z-axis of the helix varies quadratically with the azimuthal angle. The radial component of the unusual torque, which also lies along the principal normal vector of the helix, starts to perform a precession motion by tracking a spiral orbit around the z-axis, whereas its apex angle decreases asymptotically with the azimuthal angle and finally reaches a finite value depending on the height of the helix along the z-axis. The ordinary torque terms, which are also deduced from the self- and anti-self-conjugate parts of the deformation tensor, have magnitudes half that of the full torque term reported in the literature. The present results were applied to the helical conformation of α-peptides designated by {3.611} to show that the mechanical stability of strained open-ended helical conformations can be successfully achieved by spontaneous readjustments of the surface and bulk Helmholtz free energies under isothermal isochoric conditions. It has been demonstrated that the main contribution to the mechanical stability of α-peptide 3.611 cannot come alone from the electrostatic dipole-dipole interaction potential of the anti-align excess dipole pairs but also from the surface Helmholtz free energy, which is characterized by a binding free energy of -15.5 eV/molecule (-32.56 Kcal/mole) for an alpha-peptide composed of 11 amino acid residues with a critical arc length of approximately 10 nm, assuming that the shear modulus is G = 1GPa and the surface Helmholtz specific free energy density is fs = 800 erg/cm2. This result was in excellent agreement with the experimental observations of the AH-1 conformation of (Glu)n Cys at pH 8. The present theory indicates that only two excess permanent anti-align dipole pairs for one α-Helical peptide molecule is requirement to stabilize the whole secondary structure of the protein that is exposed to heavy torsional deformation during the folding processes which amounts to 7.75 eV/molecule stored electrostatic energy compared to the interfacial Helmholtz free energy of -23.25 eV/molecule, which is exposed to hydrophobic environments.

How Does Triclocarban Affect Sulfur Transformation in Anaerobic Systems?

Triclocarban (TCC), as a typical antimicrobial agent, accumulates at substantial levels in natural environments and engineered systems. This work investigated the impact of TCC on anaerobic sulfur transformation, especially toxic H2S production. Experimental findings revealed that TCC facilitated sulfur flow from the sludge solid phase to liquid phase, promoted sulfate reduction and sulfur-containing amino acid degradation, and largely improved anaerobic H2S production, i.e., 50-600 mg/kg total suspended solids (TSS) TCC increased the cumulative H2S yields by 24.76-478.12%. Although TCC can be partially biodegraded in anaerobic systems, the increase in H2S production can be mainly attributed to the effect of TCC rather than its degradation products. TCC was spontaneously adsorbed by protein-like substances contained in microbe extracellular polymers (EPSs), and the adsorbed TCC increased the direct electron transfer ability of EPSs, possibly due to the increase in the content of electroactive polymer protein in EPSs, the polarization of the amide group C═O bond, and the increase of the α-helical peptide dipole moment, which might be one important reason for promoting sulfur bioconversion processes. Microbial analysis showed that the presence of TCC enriched the organic substrate-degrading bacteria and sulfate-reducing bacteria and increased the abundances of functional genes encoding sulfate transport and dissimilatory sulfate reduction.

Impact of lipidation site on the activity of α-helical antimicrobial peptides

Antimicrobial peptides (AMPs) display advantages over traditional antibiotics due to their broad spectrum of activity against various pathogens, and may even overcome bacterial drug resistance. However, despite their potential therapeutic benefits, widespread application of AMPs is limited by their instability, sensitivity to high salt concentrations, toxicity, and immunogenicity. Lipidation is a promising strategy in overcoming these drawbacks and potential problems for drug candidates. While N-terminal lipidation is a well-studied form of acylation of biologically active peptides, fatty acylation of the lysine side chain has still been poorly explored. In this study, we examined systematic introduction of octanoic (C8) or decanoic (C10) acid into the sequences of three antimicrobial α-helical peptides, namely LL-I, LK6, and ATRA-1, by acylation of subsequent lysine residues, resulting in 17 lipopeptides. Fatty acid lengths optimal for antimicrobial activity were selected based on a previous study on the N-terminal lipidated counterparts of these peptides. Shuffling the position of the fatty acid tails in the sequences of the peptides preserved high activity against Gram-positive bacteria, increased activity against Gram-negative strains and reduced cytotoxicity, compared to the N-terminal acylated counterparts. In the case of the LL-I and LK6 conjugates, the interactions with artificial negatively charged membranes induced formation of an α-helical structure but without a direct correlation between helicity and amphipathicity. Unexpectedly, the ATRA-1 derivatives showed only a small tendency, if any, to adopt a helical structure upon binding to POPG vesicles, which may indicate a non-helical active conformation. A more detailed study of the selected analogues, namely LL-I-4C8, LK6-7C8, and ATRA-1-11C10, provided evidence of a tendency to self-assemble into clumped and/or isolated fibrils, micelles or clusters of micelles, and proved that the lipid bilayer is the main target of action of the tested lipopeptides. In summary, the results of the present study highlight that alternative conjugation sites for lipid modification of AMPs, rather than the commonly applied N-terminal conjugation site, may improve the selectivity of action and be feasible in testing for the development of new lipid-peptide conjugates.

Size-tunable transmembrane nanopores assembled from decomposable molecular templates

Transmembrane nanopores, as key elements in molecular transport and single-molecule sensors, are assembled naturally from multiple monomers in the presence of lipid bilayers. The nanopore size, especially the precise diameter of the inner space, determines its sensing targets and further biological application. In this paper, we introduce a template molecule-aided assembly strategy for constructing size-tunable transmembrane nanopores. Inspired by the barrel-like structure, similar to many transmembrane proteins, cyclodextrin molecules of different sizes are utilized as templates and modulators to assemble the α-helical barreled peptide of polysaccharide transporters (Wza). The functional nanopores assembled by this strategy possess high biological and chemical activity and can be inserted into lipid bilayers, forming stable single channels for single-molecule sensing. After enzyme digestion, the cyclodextrins on protein nanopores can be degraded, and the remaining nontemplate transmembrane protein nanopores can also preserve the integrity of their structure and function. The template molecule-aided assembly strategy employed a simple and convenient method for fully artificially synthesizing transmembrane protein nanopores; the pore size is completely dependent on the size of the template molecule and controllable, ranging from 1.1 to 1.8 nm. Furthermore, by chemically synthesized peptides and modifications, the pore function is easily modulated and does not involve the cumbersome genetic mutations of other biological techniques.

Redox-Triggered Reversible Switching between Dynamic and Quasi-static α-Helical Peptides.

We report the reversible transformation between a singly stapled dynamic α-helical peptide and a doubly stapled quasi-static one through redox-triggered dithiol/disulfide conversions of a stapling moiety. This process allows the rate of interconversion between the right-handed (P) and left-handed (M) α-helices to be altered by a factor of approximately 103 before and after the transformation. An as-obtained doubly stapled α-helical peptide, which is composed of an achiral peptide having an l-valine carboxylic acid residue at the C-terminus, a disulfide-based reversible staple, and a biphenyl-based fixed staple, adopts an (M)-rich form as a kinetically trapped state. The (M)-rich helix was subsequently transformed into the thermodynamically stable (P)-rich form in 1,1,2,2-tetrachloroethane with the half-life time (t1/2) of approximately 44 days at 25 °C. Reduction of the doubly stapled peptide with tri-n-butylphosphine in tetrahydrofuran/water (10/1, v/v) produced the corresponding singly stapled dynamic α-helical peptide bearing two thiol groups at the side chains, which underwent solvent-induced reversible helicity inversion. The resulting dithiol of the singly stapled peptide could be reoxidized to form the original doubly stapled form using 4,4'-dithiodipyridine. Furthermore, the P/M interconversion of a doubly stapled peptide with two flexible hydrocarbon-based staples is considerably more rapid than that with more rigid staples.

Mixed Stereochemistry Macrocycle Acts as a Helix-Stabilizing Peptide N-Cap.

Interactions between proteins and α-helical peptides have been the focus of drug discovery campaigns. However, the large interfaces formed between multiple turns of an α-helix and a binding protein represent a significant challenge to inhibitor discovery. Modified peptides featuring helix-stabilizing macrocycles have shown promise as inhibitors of these interactions. Here, we tested the ability of N-terminal to side-chain thioether-cyclized peptides to inhibit the α-helix binding protein Mcl-1, by screening a trillion-scale library. The enriched peptides were lariats featuring a small, four-amino-acid N-terminal macrocycle followed by a short linear sequence that resembled the natural α-helical Mcl-1 ligands. These "Heliats" (helical lariats) bound Mcl-1 with tens of nM affinity, and inhibited the interaction between Mcl-1 and a natural peptide ligand. Macrocyclization was found to stabilize α-helical structures and significantly contribute to affinity and potency. Yet, the 2nd and 3rd positions within the macrocycle were permissible to sequence variation, so that a minimal macrocyclic motif, of an N-acetylated d-phenylalanine at the 1st position thioether connected to a cysteine at the 4th, could be grafted into a range of peptides and stabilize helical conformations. We found that d-stereochemistry is more helix-stabilizing than l- at the 1st position in the motif, as the d-amino acid can utilize polyproline II torsional angles that allow for more optimal intrachain hydrogen bonding. This mixed stereochemistry macrocyclic N-cap is synthetically accessible, requiring only minor modifications to standard solid-phase peptide synthesis, and its compatibility with peptide screening can provide ready access to helix-focused peptide libraries for de novo inhibitor discovery.

Electrically Conductive Peptide Fibers as Direct Electron Transfer Scaffolds for Enzymatic Electrocatalysis

Biology provides many sources of inspiration for synthetic and multi-functional nanomaterials. Naturally evolved proteins possess a range of unique functions and self-assembly behavior. Some of these have electron transport functions as part of metabolic processes. Their flexible design and potential for stimuli responsiveness make proteins ideal building blocks of bioelectronic interfaces. In biosensor and electrocatalysis applications, bioelectronic materials are designed to interconvert biological signals or processes into electronic signals and vice versa. In this work, we designed a peptide fiber structure that exhibits stimuli-responsive self-assembly and the capacity to transport electrical current over micrometer long distances. Hierarchically ordered nanofibers of α-helical coiled-coil peptides were assembled using a pH responsive structure ordering motif comprising of two neighboring lysine residues. Cryo-EM structures of these assemblies reveal a novel organization of α-helical peptides in a cross coiled coil arrangement that exhibits electrical conductivity. Both solid-state and solution-based electrochemical characterization show that these fibers are conductive. Single-fiber conductive AFM determined that the solid-state electrical conductivity is on a similar order of magnitude with conductive cytochrome filaments from bacteria. Solution deposited fiber films approximately doubled the electroactive surface area of the electrode, confirming their conductivity in aqueous environments. Furthermore, these fibers can be used as scaffolds for redox enzyme immobilization for electrochemical biosensing. Progress towards immobilized enzymatic devices will be discussed as well. This work further expands the field of stimuli-responsive and multifunctional nanomaterials by using peptide assemblies as structural supports for future implementation in bioelectronic and bioelectrochemical systems.

High amphipathicity of α-helical peptides enhances unmethylated CpG DNA-induced activation of mouse macrophage-like RAW264.7 cells

The α-helical antimicrobial peptide Kn2-7 enhances the activation of mouse macrophage-like RAW264.7 induced by DNA containing unmethylated cytosine-guanine motifs (CpG DNA). This enhancement is related to increased cellular uptake of DNA by Kn2-7, but the relevant properties of Kn2-7 are unknown. Physicochemical property analysis revealed that Kn2-7 has high amphipathicity. In contrast, the α-helical antimicrobial peptide L5, which increases the cellular uptake of CpG DNA but does not enhance CpG DNA-induced activation, has low amphipathicity. Kn2-7 derivatives with decreased amphipathicity but the same amino acid composition as Kn2-7 did not enhance CpG DNA-induced activation. On the other hand, L5 derivatives with high amphipathicity but the same amino acid composition as L5 enhanced CpG DNA-induced activation. Cellular uptake of DNA was not increased by the L5 derivatives, indicating that high amphipathicity does not affect DNA uptake. Furthermore, α-helical peptides with reversed sequences relative to the Kn2-7 and L5 derivatives with high amphipathicity were synthesized. The reversed-sequence peptides, which had the same amphipathicity but different amino acid sequences from their counterparts, enhanced CpG DNA-induced activation. Taken together, these observations indicate that the high amphipathicity of α-helical peptides enhances the CpG DNA-induced activation of RAW264.7.

Antimicrobial peptide 2K4L inhibits the inflammatory response in macrophages and Caenorhabditis elegans and protects against LPS-induced septic shock in mice

2K4L is a rationally designed analog of the short α-helical peptide temporin-1CEc, a natural peptide isolated and purified from the skin secretions of the Chinese brown frog Rana chensinensis by substituting amino acid residues. 2K4L displayed improved and broad-spectrum antibacterial activity than temporin-1CEc in vitro. Here, the antibacterial and anti-inflammatory activities of 2K4L in macrophages, C. elegans and mice were investigated. The results demonstrated that 2K4L could enter THP-1 cells to kill a multidrug-resistant Acinetobacter baumannii strain (MRAB 0227) and a sensitive A. baumannii strain (AB 22933), as well as reduce proinflammatory responses induced by MRAB 0227 by inhibiting NF-κB signaling pathway. Similarly, 2K4L exhibited strong bactericidal activity against A. baumannii uptake into C. elegans, extending the lifespan and healthspan of the nematodes. Meanwhile, 2K4L alleviated the oxidative stress response by inhibiting the expression of core genes in the p38 MAPK/PMK-1 signaling pathway and downregulating the phosphorylation level of p38, thereby protecting the nematodes from damage by A. baumannii. Finally, in an LPS-induced septic model, 2K4L enhanced the survival of septic mice and decreased the production of proinflammatory cytokines by inhibiting the signaling protein expression of the MAPK and NF-κB signaling pathways and protecting LPS-induced septic mice from a lethal inflammatory response. In conclusion, 2K4L ameliorated LPS-induced inflammation both in vitro and in vivo.

Fermi Resonance of the N-D Stretching Mode Probing the Local Hydrogen-Bonding Environment in Proteins.

Local H-bonding interactions are crucial for proteins to undergo various structural transitions and form different secondary structures. However, identifying slight distinctions in the local H-bonding of proteins is rather challenging. Here, we demonstrate that the Fermi resonance of the N-D stretching mode can provide an effective probe for the localized H-bonding environment of proteins both at the surface/interface and in the bulk. Using sum frequency generation vibrational spectroscopy and infrared spectroscopy, we established a correlation between the Fermi resonance of the N-D mode and protein secondary structures. The H-bond of N-D···C═O splits the N-D modes into two peaks (∼2410 and ∼2470 cm-1). The relative strength ratio (R) between the ∼2410 cm-1 peak and the ∼2470 cm-1 peak is very sensitive to H-bond strength and protein secondary structure. R is less than 1 for α-helical peptides, while R is greater than 1 for β-sheet peptides. For R < 2.5, both α-helical/loop structures and β-sheet structures exhibit almost identical Fermi coupling strengths (W = 28 cm-1). For R > 2.5, W decreases from 28 to 14 cm-1 and depends on the aggregation degree of the β-sheet oligomers or fibrils. The initial local H-bonding status impacts the misfolding dynamics of proteins at the lipid bilayer interface.

Design of Artificial C-Peptides as Potential Anti-HIV-1 Inhibitors Based on 6-HB Formation Mechanism.

The six-helix bundle (6-HB) is a core structure formed during the membrane fusion process of viruses with the Class I envelope proteins. Peptide inhibitors, including the marketed Enfuvirtide, blocking the membrane fusion to exert inhibitory activity were designed based on the heptads repeat interactions in 6-HB. However, the drawbacks of Enfuvirtide, such as drug resistance and short half-life in vivo, have been confirmed in clinical applications. Therefore, novel design strategies are pivotal in the development of next-generation peptide-based fusion inhibitors. The de novo design of α-helical peptides against MERS-CoV and IAVs has successfully expedited the development of fusion inhibitors. The reported sequences were completely nonhomologous with natural peptides, which can provide some inspirations for the antiviral design against other pathogenic viruses with class I fusion proteins. Here, we design a series of artificial C-peptides based on the similar mechanism of 6-HB formation and general rules of heptads repeat interaction. The inhibitory activity of peptides against HIV-1 was assessed by HIV-1 Env-mediated cell-cell fusion assays. Interaction between artificial C-peptides and target peptides was evaluated by circular dichroism, polyacrylamide gel electrophoresis, size-exclusion chromatography, and sedimentation velocity analysis. Molecular docking studies were performed by using Schrödinger molecular modelling software. The best-performing artificial C-peptide, 1SR, was highly active against HIV-1 env-mediated cell-cell fusion. 1SR binds to the gp41 NHR region, assembling polymer to prevent endogenous 6-HB formation. We have found an artificial C-lipopeptide lead compound with inhibitory activity against HIV-1. Also, this paper enriched both N- and C-teminal heptads repeat interaction rules in 6-HB and provided an effective idea for next-generation peptide-based fusion inhibitors against HIV-1.

Systematic evaluation of lecithin:cholesterol acyltransferase binding sites in apolipoproteins via peptide based nanodiscs: regulatory role of charged residues at positions 4 and 7.

Lecithin:cholesterol acyltransferase (LCAT) exhibits α-activity on high-density and β-activity on low-density lipoproteins. However, the molecular determinants governing LCAT activation by different apolipoproteins remain elusive. Uncovering these determinants would offer the opportunity to design and explore advanced therapies against dyslipidemias. Here, we have conducted coarse-grained and all-atom molecular dynamics simulations of LCAT with nanodiscs made with α-helical amphiphilic peptides either derived from apolipoproteins A1 and E (apoA1 and apoE) or apoA1 mimetic peptide 22A that was optimized to activate LCAT. This study aims to explore what drives the binding of peptides to our previously identified interaction site in LCAT. We hypothesized that this approach could be used to screen for binding sites of LCAT in different apolipoproteins and would provide insights to differently localized LCAT activities. Our screening approach was able to discriminate apoA1 helixes 4, 6, and 7 as key contributors to the interaction with LCAT supporting the previous research data. The simulations provided detailed molecular determinants driving the interaction with LCAT: the formation of hydrogen bonds or salt bridges between peptides E4 or D4 and LCAT S236 or K238 residues. Additionally, salt bridging between R7 and D73 was observed, depending on the availability of R7. Expanding our investigation to diverse plasma proteins, we detected novel LCAT binding helixes in apoL1, apoB100, and serum amyloid A. Our findings suggest that the same binding determinants, involving E4 or D4 -S236 and R7-D73 interactions, influence LCAT β-activity on low-density lipoproteins, where apoE and or apoB100 are hypothesized to interact with LCAT.

Heterologous expression of frog antimicrobial peptide Odorranain-C1 in Pichia pastoris: Biological characteristics and its application in food preservation

To reduce food spoilage and deterioration caused by microbial contamination, antimicrobial peptides (AMPs) have gradually gained attention as a biological preservative. Odorranain-C1 is an α-helical cationic antimicrobial peptide extracted from the skin of frogs with broad-spectrum antimicrobial activity. In this study, we achieved the expression of Odorranain-C1 in Pichia pastoris (P. pastoris) (also known as Komagataella phaffii) by employing DNA recombination technology. The recombinant Odorranain-C1 showed broad-spectrum antibacterial activity and displayed a minimum inhibitory concentration within the range of 8–12 μg.mL-1. Meanwhile, Odorranain-C1 exhibited superior stability and lower hemolytic activity. Mechanistically, Odorranain-C1 disrupted the bacterial membrane's integrity, ultimately causing membrane rupture and subsequent cell death. In tilapia fillets preservation, Odorranain-C1 inhibited the total colony growth and pH variations, while also reducing the production of total volatile basic nitrogen (TVB-N) and thiobarbituric acid (TBA). In conclusion, these studies demonstrated the efficient recombinant expression of Odorranain-C1 in P. pastoris, highlighting its promising utilization in food preservation.

Dual-function antimicrobial-antibiofilm peptide hybrid to tackle biofilm-forming Staphylococcus epidermidis

BackgroundDue to their resistance and difficulty in treatment, biofilm-associated infections are problematic among hospitalized patients globally and account for 60% of all bacterial infections in humans. Antibiofilm peptides have recently emerged as an alternative treatment since they can be effectively designed and exert a different mode of biofilm inhibition and eradication.MethodsA novel antibiofilm peptide, BiF, was designed from the conserved sequence of 18 α-helical antibiofilm peptides by template-assisted technique and its activity was improved by hybridization with a lipid binding motif (KILRR). Novel antibiofilm peptide derivatives were modified by substituting hydrophobic amino acids at positions 5 or 7, and both, with positively charged lysines (L5K, L7K). These peptide derivatives were tested for antibiofilm and antimicrobial activities against biofilm-forming Staphylococcus epidermidis and multiple other microbes using crystal violet and broth microdilution assays, respectively. To assess their impact on mammalian cells, the toxicity of peptides was determined through hemolysis and cytotoxicity assays. The stability of candidate peptide, BiF2_5K7K, was assessed in human serum and its secondary structure in bacterial membrane-like environments was analyzed using circular dichroism. The action of BiF2_5K7K on planktonic S. epidermidis and its effect on biofilm cell viability were assessed via viable counting assays. Its biofilm inhibition mechanism was investigated through confocal laser scanning microscopy and transcription analysis. Additionally, its ability to eradicate mature biofilms was examined using colony counting. Finally, a preliminary evaluation involved coating a catheter with BiF2_5K7K to assess its preventive efficacy against S. epidermidis biofilm formation on the catheter and its surrounding area.ResultsBiF2_5K7K, the modified antibiofilm peptide, exhibited dose-dependent antibiofilm activity against S. epidermidis. It inhibited biofilm formation at subinhibitory concentrations by altering S. epidermidis extracellular polysaccharide production and quorum-sensing gene expression. Additionally, it exhibited broad-spectrum antimicrobial activity and no significant hemolysis or toxicity against mammalian cell lines was observed. Its activity is retained when exposed to human serum. In bacterial membrane-like environments, this peptide formed an α-helix amphipathic structure. Within 4 h, a reduction in the number of S. epidermidis colonies was observed, demonstrating the fast action of this peptide. As a preliminary test, a BiF2_5K7K-coated catheter was able to prevent the development of S. epidermidis biofilm both on the catheter surface and in its surrounding area.ConclusionsDue to the safety and effectiveness of BiF2_5K7K, we suggest that this peptide be further developed to combat biofilm infections, particularly those of biofilm-forming S. epidermidis.

Membrane-Active All-Hydrocarbon-Stapled α-Helical Amphiphilic Tat Peptides: Broad-Spectrum Antibacterial Activity and Low Incidence of Drug Resistance.

Multidrug resistance against conventional antibiotics has dramatically increased the difficulty of treatment and accelerated the need for novel antibacterial agents. The peptide Tat (47-57) is derived from the transactivating transcriptional activator of human immunodeficiency virus 1, which is well-known as a cell-penetrating peptide in mammalian cells. However, it is also reported that the Tat peptide (47-57) has antifungal activity. In this study, a series of membrane-active hydrocarbon-stapled α-helical amphiphilic peptides were synthesized and evaluated as antibacterial agents against Gram-positive and Gram-negative bacteria, including multidrug-resistant strains. The impact of hydrocarbon staple, the position of aromatic amino acid residue in the hydrophobic face, the various types of aromatic amino acids, and the hydrophobicity on bioactivity were also investigated and discussed in this study. Among those synthesized peptides, analogues P3 and P10 bearing a l-2-naphthylalanine (Φ) residue at the first position and a Tyr residue at the eighth position demonstrated the highest antimicrobial activity and negligible hemolytic toxicity. Notably, P3 and P10 showed obviously enhanced antimicrobial activity against multidrug-resistant bacteria, low drug resistance, high cell selectivity, extended half-life in plasma, and excellent performance against biofilm. The antibacterial mechanisms of P3 and P10 were also preliminarily investigated in this effort. In conclusion, P3 and P10 are promising antimicrobial alternatives for the treatment of the antimicrobial-resistance crisis.

Acyl Capping Group Identity Effects on α-Helicity: On the Importance of Amide·Water Hydrogen Bonds to α-Helix Stability.

Acyl capping groups stabilize α-helices relative to free N-termini by providing one additional C═Oi···Hi+4-N hydrogen bond. The electronic properties of acyl capping groups might also directly modulate α-helix stability: electron-rich N-terminal acyl groups could stabilize the α-helix by strengthening both i/i + 4 hydrogen bonds and i/i + 1 n → π* interactions. This hypothesis was tested in peptides X-AKAAAAKAAAAKAAGY-NH2, where X = different acyl groups. Surprisingly, the most electron-rich acyl groups (pivaloyl and iso-butyryl) strongly destabilized the α-helix. Moreover, the formyl group induced nearly identical α-helicity to that of the acetyl group, despite being a weaker electron donor for hydrogen bonds and for n → π* interactions. Other acyl groups exhibited intermediate α-helicity. These results indicate that the electronic properties of the acyl carbonyl do not directly determine the α-helicity in peptides in water. In order to understand these effects, DFT calculations were conducted on α-helical peptides. Using implicit solvation, α-helix stability correlated with acyl group electronics, with the pivaloyl group exhibiting closer hydrogen bonds and n → π* interactions, in contrast to the experimental results. However, DFT and MD calculations with explicit water solvation revealed that hydrogen bonding to water was impacted by the sterics of the acyl capping group. Formyl capping groups exhibited the closest water-amide hydrogen bonds, while pivaloyl groups exhibited the longest. In α-helices in the PDB, the highest frequency of close amide-water hydrogen bonds is observed when the N-cap residue is Gly. The combination of experimental and computational results indicates that solvation (hydrogen bonding of water) to the N-terminal amide groups is a central determinant of α-helix stability.