3DP Models Research Articles

Transapical Transcatheter Aortic Valve Replacement Under 3-Dimensional Guidance to Treat Pure Aortic Regurgitation in Patients with a Large Aortic Annulus.

Transcatheter aortic valve replacement (TAVR) is a challenge for patients with aortic regurgitation (AR) and a large annulus. Our goal was to evaluate the clinical outcomes and predictors of transapical TAVR in AR patients with a large annulus and noncalcification and the feasibility and safety of 3-dimensional printing (3DP) in the preprocedural simulation. Patients with a large annulus (diameter >29 mm) were enrolled and divided into the simulation (n = 43) and the nonsimulation group (n = 82). Surgeons used the specific 3DP model of the simulation group to simulate the main steps before the procedure and to refit the transcatheter heart valve (THV) according to the simulated results. The average annular diameter of the overall cohort was 29.8 ± 0.7 mm. Compared with the nonsimulation group, the simulation group used a higher proportion of extra oversizing for THVs (97.6% vs. 85.4%, p = 0.013), and the coaxiality performance was better (9.7 ± 3.9° vs. 12.7 ± 3.8°, p < 0.001). Both THV displacement and ≥ mild paravalvular leakage (PVL) occurred only in the nonsimulation group (9.8% vs. 0, p < 0.001; 9.8% vs. 0, p < 0.001). Multivariate regression analysis showed that extra oversizing, coaxial angle and annulus diameter were independent predictors of THV displacement and ≥ mild PVL, respectively. Based on 3DP guidance, transapical TAVR using extra oversizing was safe and feasible for patients with noncalcified AR with a large annulus. Extra oversizing and coaxial angle were predictors of postprocedural THV displacement and ≥ mild PVL in such patients.

Developing Patient-Derived 3D-Bioprinting models of pancreatic cancer

IntroductionPancreatic cancer (PC) remains a challenging malignancy, and adjuvant chemotherapy is critical in improving patient survival post-surgery. However, the intrinsic heterogeneity of PC necessitates personalized treatment strategies, highlighting the need for reliable preclinical models. ObjectivesThis study aimed to develop novel patient-derived preclinical PC models using three-dimensional bioprinting (3DP) technology. MethodsPatient-derived PC models were established using 3DP technology. Genomic and histological analyses were performed to characterize these models and compare them with corresponding patient tissues. Chemotherapeutic drug sensitivity tests were conducted on the PC 3DP models, and correlations with clinical outcomes were analyzed. ResultsThe study successfully established PC 3DP models with a modeling success rate of 86.96%. These models preserved genomic and histological features consistent with patient tissues. Drug sensitivity testing revealed significant heterogeneity among PC 3DP models, mirroring clinical variability, and potential correlations with clinical outcomes. ConclusionThe PC 3DP models demonstrated their utility as reliable preclinical tools, retaining key genomic and histological characteristics. Importantly, drug sensitivity profiles in these models showed potential correlations with clinical outcomes, indicating their promise in customizing treatment strategies and predicting patient prognoses. Further validation with larger patient cohorts is warranted to confirm their potential clinical utility.

A novel 3D-printed educational model for the training of laparoscopic bile duct Exploration:a pilot study for beginning trainees

BackgroundLaparoscopic common bile duct exploration (LCBDE) is a minimally invasive procedure for the removal of bile duct stones that is often performed by experienced hepatobiliary surgeons; beginners do not easily master this approach. AimTo investigate the effectiveness and practicality of a three-dimensional printed (3DP) anatomical model based on radiographic images in the training of LCBDE techniques and formulate standardized educational workflows. MethodsColored LCBDE training models were produced using 3DP technology. Twenty standardized training trainees were randomly divided into two groups: a 3DP model training group and a traditional laparoscopic simulation training group. Both groups received the same number of teaching hours. After a 4-weeks training course, the trainees’ subjective and objective progress in basic knowledge and manipulations were evaluated and compared. ResultsCompared with traditional laparoscopic simulation, 3DP model simulation training is of great significance in improving trainers' understanding of surgical procedures and cooperation during the operation. Trainees with 3DP models training demonstrated a significant improvement in their understanding of the key points of surgery (χ2 = 6.139, p = 0.013) and skills scores, especially in core procedural steps operation. More importantly, the trainees showed higher levels of satisfaction and self-confidence while assisting in the surgery. ConclusionWith the development of 3DP models, improvements in the learning effect for theoretical understanding and practical skills were significant. The present study is the initial educational experience with 3DP models to facilitate the operational capabilities of the trainees for LCBDE.

A systematic review of 3D printing in autologous breast reconstruction

Aim: The use of three-dimensionally printed (3DP), patient-specific models in autologous breast reconstruction is gaining popularity, namely for their benefits in surgical planning and ability to aid in aesthetic outcomes. Furthermore, 3DP patient-specific models serve as a safe alternative to intraoperative surgical training and act as a useful tool for visualizing the intramuscular course of deep inferior epigastric perforator vessels. Despite demonstrated usefulness in other surgical specialties and areas of plastic surgery, there remains a significant gap in the literature exploring specific perioperative, preoperative, and intraoperative uses as well as the educational advantages of 3DP in autologous breast reconstruction. Methods: PubMed, MEDLINE, EMBASE, Scopus, and the Cochrane Central Register of Controlled Trials were searched for all English language articles using specific MeSH terms (3dp OR 3D-print* OR three dimension* print*) AND (breast reconstruction). Only studies discussing the use of 3DP for surgical planning or as an educational tool in autologous breast reconstruction were included. Studies using 3DP as interventions or implants were excluded. Results: A total of 168 articles were identified, 13 of which were selected for inclusion. Risk of bias was low for 8 articles and moderate for 5 articles. Seven (53.8%) articles discussed 3DP usage in preoperative planning. Most papers (12, 92.3%) focused on 3DP models as guides for intraoperative identification of anatomical landmarks and 3DP molds as tools to achieve desired breast volume, shape, and projection. Only 4 (30.7%) articles discussed patient outcomes. Of the 4 (30.7%) articles that discussed education, only one of these properly assessed trainees and faculty using pre- and post-intervention surveys. Conclusion: The majority of 3DP research as an intraoperative guide and educational tool is concentrated outside of autologous breast reconstruction. Studies that do discuss this have found significantly higher success rates in dissecting true DIEP flaps when 3DP vascular modeling is used and can result in improved confidence and competence in surgical training for microsurgical anastomosis. Although 3DP has been shown to aid microsurgeons in preoperative planning, most research concentrates on the aid of this novel technology in dynamic, intraoperative decision making. Existing research has identified five 3DP breast molds, but studies have yet to compare these molds in a controlled setting to assess for superiority in feasibility and outcomes. There is little investigation into the usefulness of 3DP as an educational tool, and more research should be conducted as this methodology expands to cover more forms of autologous breast reconstruction.

Desktop 3D printed anatomic models for minimally invasive direct coronary artery bypass

BackgroundThree-dimensional (3D) printing technology has impacted many clinical applications across medicine. However, 3D printing for Minimally Invasive Direct Coronary Artery Bypass (MIDCAB) has not yet been reported in the peer-reviewed literature. The current observational cohort study aimed to evaluate the impact of half scaled (50% scale) 3D printed (3DP) anatomic models in the pre-procedural planning of MIDCAB.MethodsRetrospective analysis included 12 patients who underwent MIDCAB using 50% scale 3D printing between March and July 2020 (10 males, 2 females). Distances measured from CT scans and 3DP anatomic models were correlated with Operating Room (OR) measurements. The measurements were compared statistically using Tukey’s test. The correspondence between the predicted (3DP & CT) and observed best InterCostal Space (ICS) in the OR was recorded. Likert surveys from the 3D printing registry were provided to the surgeon to assess the utility of the model. The OR time saved by planning the procedure using 3DP anatomic models was estimated subjectively by the cardiothoracic surgeon.ResultsAll 12 patients were successfully grafted. The 3DP model predicted the optimal ICS in all cases (100%). The distances measured on the 3DP model corresponded well to the distances measured in the OR. The measurements were significantly different between the CT and 3DP (p < 0.05) as well as CT and OR (p < 0.05) groups, but not between the 3DP and OR group. The Likert responses suggested high clinical utility of 3D printing. The mean subjectively estimated OR time saved was 40 min.ConclusionThe 50% scaled 3DP anatomic models demonstrated high utility for MIDCAB and saved OR time while being resource efficient. The subjective benefits over routine care that used 3D visualization for surgical planning warrants further investigation.

The Novel Impact of Augmented Reality and 3D Printing in the Diagnosis of Complex Acetabular Fractures: A Comparative Randomized Study in Orthopedic Residents.

Augmented reality (AR) and 3D printing (3DP) are novel technologies in the orthopedic field. Over the past decade, enthusiasm for these new digital applications has driven new perspectives in improving diagnostic accuracy and sensitivity in the field of traumatology. Currently, however, it is still difficult to quantify their value and impact in the medical-scientific field, especially in the improvement of diagnostics in complex fractures. Acetabular fractures have always been a challenge in orthopedics, due to their volumetric complexity and low diagnostic reliability. Background/Objectives: The goal of this study was to determine whether these methods could improve the learning aspect and diagnostic accuracy of complex acetabular fractures compared to gold-standard CT (computed tomography). Methods: Orthopedic residents of our department were selected and divided into Junior (JUN) and Senior (SEN) groups. Associated fractures of acetabulum were included in the study, and details of these were provided as CT scans, 3DP models, and AR models displayed on a tablet screen. In a double-blind questionnaire, each resident classified every fracture. Diagnostic accuracy (DA), response time (RT), agreement (R), and confidence (C) were measured. Results: Twenty residents (JUN = 10, SEN = 10) classified five fractures. Overall DA was 26% (CT), 18% (3DP), and 29% (AR). AR-DA was superior to 3DP-DA (p = 0.048). DA means (JUN vs. SEN, respectively): CT-DA was 20% vs. 32% (p < 0.05), 3DP-DA was 12% vs. 24% (p = 0.08), and AR-DA was 28% vs. 30% (p = 0.80). Overall RT was 61.2 s (±24.6) for CT, 35.8 s (±20.1) for 3DP, and 46.7 s (±20.8) for AR. R was fairly poor between methods and groups. Overall, 3DPs had superior C (65%). Conclusions: AR had the same overall DA as CT, independent of experience, 3DP had minor differences in DA and R, but it was the fastest method and the one in which there was the most confidence. Intra- and inter-observer R between methods remained very poor in residents.

Prediction of Clinical Precision Chemotherapy by Patient-Derived 3D Bioprinting Models of Colorectal Cancer and Its Liver Metastases.

Methods accurately predicting the responses of colorectal cancer (CRC) and colorectal cancer liver metastasis (CRLM) to personalized chemotherapy remain limited due to tumor heterogeneity. This study introduces an innovative patient-derived CRC and CRLM tumor model for preclinical investigation, utilizing 3d-bioprinting (3DP) technology. Efficient construction of homogeneous in vitro 3D models of CRC/CRLM is achieved through the application of patient-derived primary tumor cells and 3D bioprinting with bioink. Genomic and histological analyses affirm that the CRC/CRLM 3DP tumor models effectively retain parental tumor biomarkers and mutation profiles. In vitro tests evaluating chemotherapeutic drug sensitivities reveal substantial tumor heterogeneity in chemotherapy responses within the 3DP CRC/CRLM models. Furthermore, a robust correlation is evident between the drug response in the CRLM 3DP model and the clinical outcomes of neoadjuvant chemotherapy. These findings imply a significant potential for the application of patient-derived 3DP cancer models in precision chemotherapy prediction and preclinical research for CRC/CRLM.

Analysis and evaluation of patient-specific three-dimensional printing in complex septal myectomy.

This study aimed to assess the effectiveness of three-dimensional printing (3DP) in patients with complex hypertrophic cardiomyopathy requiring combined transaortic and transapical septal myectomy. We created 3DP models for 7 patients undergoing this surgery approach between June and October 2022 using silicone-like resin and conducted mock operations. The models were compared with echocardiography to identify abnormal muscle bundles and heart structures. These patients were then compared with a 1:2 matched group without 3DP, considering age, sex and additional operations. The models mostly presenting with midventricular obstruction showed high consistency with original computed tomography data (r = 0.978, P < 0.001). 3DP identified more abnormal muscle bundles than echocardiography, primarily between the interventricular septum and apex. Excised specimens in mock operations mirrored those in actual myectomies. While cardiopulmonary bypass time was not significantly different, a near-20-min decrease was observed in the 3DP group (135.5 ± 31.1 vs 154.4 ± 36.6 min, P = 0.054). While no significant differences in surgical outcomes were observed, 3DP appeared to enhance the visualization and understanding of spatial structures (average Likert scale score 4.0), potentially contributing to surgical proficiency (overall rating score 3.9). The use of 3DP may offer additional value in the preparation and execution of operations for complex hypertrophic cardiomyopathy cases.

Full-sized realistic 3D printed models of liver and tumour anatomy: a useful tool for the clinical medicine education of beginning trainees

BackgroundSimulation-based medical education (SBME) and three-dimensional printed (3DP) models are increasingly used in continuing medical education and clinical training. However, our understanding of their role and value in improving trainees’ understanding of the anatomical and surgical procedures associated with liver surgery remains limited. Furthermore, gender bias is also a potential factor in the evaluation of medical education. Therefore, the aim of this study was to evaluate the educational benefits trainees receive from the use of novel 3DP liver models while considering trainees’ experience and gender.MethodsFull-sized 3DP liver models were developed and printed using transparent material based on anonymous CT scans. We used printed 3D models and conventional 2D CT scans of the liver to investigate thirty trainees with various levels of experience and different genders in the context of both small group teaching and formative assessment. We adopted a mixed methods approach involving both questionnaires and focus groups to collect the views of different trainees and monitors to assess trainees’ educational benefits and perceptions after progressing through different training programs. We used Objective Structured Clinical Examination (OSCE) and Likert scales to support thematic analysis of the responses to the questionnaires by trainees and monitors, respectively. Descriptive analyses were conducted using SPSS statistical software version 21.0.ResultsOverall, a 3DP model of the liver is of great significance for improving trainees’ understanding of surgical procedures and cooperation during operation. After viewing the personalized full-sized 3DP liver model, all trainees at the various levels exhibited significant improvements in their understanding of the key points of surgery (p < 0.05), especially regarding the planned surgical procedure and key details of the surgical procedures. More importantly, the trainees exhibited higher levels of satisfaction and self-confidence during the operation regardless of gender. However, with regard to gender, the results showed that the improvement of male trainees after training with the 3DP liver model was more significant than that of female trainees in understanding and cooperation during the surgical procedure, while no such trend was found with regard to their understanding of the base knowledge.ConclusionTrainees and monitors agreed that the use of 3DP liver models was acceptable. The improvement of the learning effect for practical skills and theoretical understanding after training with the 3DP liver models was significant. This study also indicated that training with personalized 3DP liver models can improve all trainees’ presurgical understanding of liver tumours and surgery and males show more advantage in understanding and cooperation during the surgical procedure as compared to females. Full-sized realistic 3DP models of the liver are an effective auxiliary teaching tool for SBME teaching in Chinese continuing medical education.

Remanufacturing model selection with 3D printing

This paper investigates a two-echelon 3D printing (3DP) remanufacturing supply chain consisting of the original equipment manufacturer (OEM) and the retailer, and builds a Stackelberg game model with OEM remanufacturing and retailer remanufacturing. We use backward induction to obtain the optimal 3DP usage level, product price, and profit of the supply chain under different remanufacturing models. Through the comparison of the optimal decisions of the two remanufacturing models, we analyze the impact of the 3DP cost, sensitivity coefficient, and licensing fee on the 3DP strategy and model selection. The results show the following: First, the effect of the 3DP correlation coefficient on the price of new products varies with different remanufacturing entities. Second, when the market size variation coefficient of remanufactured products is small, the optimal 3DP usage level under the OEM remanufacturing model is higher than that under the retailer remanufacturing model. Third, the OEM’s choice of remanufacturing model is affected by the market size variation coefficient, 3DP cost and licensing fee. The research findings of this paper can provide decision support for the application of 3D printing technology in the field of remanufacturing.

The Clinical Efficacy of Contouring Periarticular Plates on a 3D Printed Bone Model.

We report our experience of preoperative plate contouring for periarticular fractures using three-dimensional printing (3DP) technology and describe its benefits. We enrolled 34 patients, including 11 with humerus midshaft fractures, 12 with tibia plateau fractures, 2 with pilon fractures, and 9 with acetabulum fractures. The entire process of plate contouring over the 3DP model was videotaped and retrospectively analyzed. The total time and number of trials for the intraoperative positioning of precontoured plates and any further intraoperative contouring events were prospectively recorded. The mismatch between the planned and postoperative plate positions was evaluated. The average plate contouring time was 9.2 min for humerus shaft, 13.8 min for tibia plateau fractures, 8.8 min for pilon fractures, and 11.6 min for acetabular fractures. Most precontoured plates (88%, 30/34) could sit on the planned position without mismatch. In addition, only one patient with humerus shaft fracture required additional intraoperative contouring. Preoperative patient specific periarticular plate contouring using a 3DP model is a simple and efficient method that may alleviate the surgical challenges involved in plate contouring and positioning.

A novel simulation module for segmental mandibulectomy and mandible reconstruction using 3D models

IntroductionMandibular resection and reconstruction are common but complex procedures in head and neck surgery. Resection with adequate margins is critical to the success of the procedure but technical training is restricted to real case experience. Here we describe our experience in the development and evaluation of a mandibular resection and reconstruction simulation module. Methods3D printed (3DP) models of a mandible with a pathologic lesion were developed from imaging data from a patient with an ameloblastoma. During an educational conference, otolaryngology trainees participated in a simulation in which they reviewed a CT scan of the pathologic mandible and then planned their osteotomies before and after handling a 3DP model demonstrating the lesion. The adequacy of the osteotomy margins was assessed and components of the simulation were rated by participants with pre- and post-training surveys. Results52 participants met criteria. After reviewing the CT scan, 34 participants (65.3 %) proposed osteotomies clear of the lesion. This proportion improved to 48 (92.3 %, p = 0.001) after handling the 3D model. Among those with initially adequate margins (n = 33), 45.5 % decreased their margins closer to the ideal, 27.2 % made no revision, 21.2 % widened their margins. 92 % of participants found the simulation beneficial for surgical planning and technical training. After the exercise, the majority of participants had increased confidence in conceptualizing the boundaries of the lesion (69.2 %) and their abilities to ablate (76.5 %). ConclusionsThe structured mandibulectomy simulation using 3DP models was useful in the development of trainee experience in segmental mandible resection. Lay summaryThis study presents the first mandibulectomy simulation module for trainees with the use of 3DP models. The use of a 3DP model was also shown to improve the quality of surgical training.

Accuracy of 3D printed spine models for pre-surgical planning of complex adolescent idiopathic scoliosis (AIS) in spinal surgeries: a case series

Adolescent idiopathic scoliosis (AIS) is a noticeable spinal deformity in both adult and adolescent population. In majority of the cases, the gold standard of treatment is surgical intervention. Technological advancements in medical imaging and 3D printing have revolutionised the surgical planning and intraoperative decision making for surgeons in spinal surgery. However, its applicability for planning complex spinal surgeries is poorly documented with human subjects. The objective of this study is to evaluate the accuracy of 3D printed models for complex spinal deformities based on Cobb angles between 40° to 95°.This is a retrospective cohort study where, five CT scans of the patients with AIS were segmented and 3D printed for evaluating the accuracy. Consideration was given to the Inter-patient and acquisition apparatus variability of the CT-scan dataset to understand the effect on trueness and accuracy of the developed CAD models. The developed anatomical models were re-scanned for analysing quantitative surface deviation to assess the accuracy of 3D printed spinal models. Results show that the average of the root mean square error (RMSE) between the 3DP models and virtual models developed using CT scan of mean surface deviations for the five 3d printed models was found to be 0.5±0.07 mm. Based on the RMSE, it can be concluded that 3D printing based workflow is accurate enough to be used for presurgical planning for complex adolescent spinal deformities. Image acquisition and post processing parameters, type of 3D printing technology plays key role in acquiring required accuracy for surgical applications.

Use of a 3D Printed, Color-Coded Airway Model for Bronchoscopy Training and Anatomy Learning

Aim: Tracheobronchial anatomy for bronchoscopy education is challenging. 3D printing (3DP) is a promising technology to design bronchoscopy simulators. Materials &amp; m ethods: We created a 3DP tracheobronchial model and color-coded the airways to train first-year pulmonary fellows. A pre- and post-test, practical test and post-test questionnaires were used to evaluate the curriculum implementation. Results: For six fellows the pre- and post-test mean score improved from 11.5/22 (SD = ±1.71) to 16.2/22 (SD = ±2.79). Practical testing mean was 34.5/54 (SD = ±5.82). Questionnaires rated the 3DP model favorably. Conclusion: Our pilot curriculum using a color-coded 3DP model demonstrated improvement in airway identification with favorable ratings by fellows. We posit conceptual frameworks in play and how we address them in future models.

3D-Printed Cardiac Models for Fetal Counseling: A Pilot Study and Novel Approach to Improve Communication.

A fetal cardiology consultation involves using two-dimensional drawings to explain the cardiac anatomy which can result in inherent variation in how the congenital heart disease (CHD) is conveyed. In this pilot study, we incorporated three-dimensional printed (3DP) models into fetal counseling to demonstrate feasibility and evaluate the impact on parental knowledge, understanding, and anxiety. Parents with a prenatal diagnosis of a muscular ventricular septal defect (VSD) and/or coarctation of aorta were enrolled. Providers were randomized into a Model or Drawing Group and crossed after six months. Parents completed a survey after the consultation which evaluated knowledge of the CHD lesion, expectant surgical management, self-rated understanding, attitude towards the visualization tool, and anxiety. Twenty-nine patients enrolled over a 12month period. Twelve consultations were done for coarctation of aorta, 13 for VSD, and four for coarctation with a VSD. Both Model and Drawing groups scored similarly in self-reported understanding and confidence, helpfulness of and improvement in communication with the visualization tool. The Model group had higher scores on questions related to the CHD anatomy and surgical intervention [5 [4-5] versus 4 [3.5-5]], p = 0.23 although this didn't reach statistical significance. For the majority (83%) of consultations, the cardiologist agreed that the 3D model improved communication. In this pilot study, we demonstrate the use of 3DP cardiac models during prenatal CHD counseling is feasible and produces results related to parental understanding and knowledge that are equal to and possibly better than the current standard of care.

Is the Pre-Shaping of an Orbital Implant on a Patient-Specific 3D-Printed Model Advantageous Compared to Conventional Free-Hand Shaping? A Systematic Review and Meta-Analysis.

This study aimed to perform a systematic review and meta-analysis to compare pre-shaped implants on a patient-specific 3D-printed (3DP) model to manual free-hand shaping (MFS) for orbital wall reconstruction. The PRISMA protocol was followed in this study, and the review was registered in the PROSPERO database (CRD42021261594). A search was conducted in MEDLINE (PubMed), Embase, Cochrane Library, Clinicaltrials.gov, Google Scholar, and the grey literature. Ten articles were included, and six outcomes were analyzed. In total, 281 patients were in the 3DP group and 283 were in the MFS group. The studies had an overall high risk of bias. 3DP models resulted in a better accuracy of fit, anatomical angle reproduction, and defect area coverage. The correction of orbital volume was also superior with statistical significance. There was a higher percentage of the correction of enophthalmos and diplopia in the 3DP group. Intraoperative bleeding and hospital stay were reduced in the 3DP group. The meta-analysis of operative time showed a reduction in the average operative time by 23.58 min (95% CI: -43.98 to -3.19), which was statistically significant (t(6) = -2.8299, p = 0.0300). The 3DP models appear advantageous for an accurate orbital wall reconstruction, with fewer complications than those for conventional free-hand-shaped implants.

Three-Dimensional-Printed Coral-like Structures as a Habitat for Reef Fish

Coral reefs are three-dimensional biogenic structures that provide habitat for plenty of marine organisms; yet, coral reefs are deteriorating worldwide. Hence, it is essential to identify suitable substitutes for such coral services. This study examines reef fishes’ behavior and reactions to three-dimensional-printed (3DP) corals based on scanned Stylophora pistillata, as well as modified 3DP models. In particular, fishes’ unresponsiveness to the color, shape, morphology, and material of 3DP models both in vitro and in situ experiments was investigated. Coral reef fishes responded to the 3DP corals and demonstrated their usage in a range of services. Moreover, a greater number of fish species interacted more with 3DP models than they did with live corals. Furthermore, specific reef fish species, such as Sea Goldies (Pseudanthias squamipinnis), showed a preference for specific 3DP coral color, and other species demonstrated preferences for specific 3DP model shapes. The current study results show that three-dimensional-printed coral models can substitute for live corals for certain types of reef fish services.

A Review of the Benefits 3D Printing Brings to Patients with Neurological Diseases

This interdisciplinary review focuses on how flexible three-dimensional printing (3DP) technology can aid patients with neurological diseases. It covers a wide variety of current and possible applications ranging from neurosurgery to customizable polypill along with a brief description of the various 3DP techniques. The article goes into detail about how 3DP technology can aid delicate neurosurgical planning and its consequent outcome for patients. It also covers areas such as how the 3DP model can be utilized in patient counseling along with designing specific implants involved in cranioplasty and customization of a specialized instrument such as 3DP optogenetic probes. Furthermore, the review includes how a 3DP nasal cast can contribute to the development of nose-to-brain drug delivery along with looking into how bioprinting could be used for regenerating nerves and how 3D-printed drugs could offer practical benefits to patients suffering from neurological diseases via polypill.

The Use of Three-Dimensional Printing in Cardiac Structural Disease: A Review.

Three-dimensional printing (3DP), or additive fabrication, is a process in which a physical 3D model is created using a multitude of 2-dimensional images. This process has been applied to numerous surgical subspecialties with growing interest for the use of 3DP in adult structural heart disease. This scoping review evaluates the use of 3DP in transcatheter and surgical aortic and mitral valve interventions as well as left atrial appendage occlusion in terms of its practical and clinical application. Articles were identified through PubMed and Embase using MeSH search terms as well as independent searches. A total of 645 articles were screened, and 37 were retained for qualitative analysis. Operative planning was coded in 100% of articles, complication prevention in 43%, medical education in 5.4%, patient education in 0%, and simulation in 5.4%. The main uses of 3DP in acquired structural heart disease are centered around operative planning and complication prevention, with moderate use regarding surgical simulation and infrequent use regarding medical and/or patient education. Although patient anatomy varies greatly, deploying 3DP as a large-scale tool remains a possibility. The more 3D models are made, the more can be learned about demographic subsets of patient populations. Due to the lack of standard operating procedures for the creation of 3DP models, the cost-effectiveness of these models is hard to determine and likely center specific. More research into this facet could inform centers that wish to implement this tool.

Comparative effectiveness of virtual reality (VR) vs 3D printed models of congenital heart disease in resident and nurse practitioner educational experience

BackgroundMedical trainees frequently note that cardiac anatomy is difficult to conceive within a two dimensional framework. The specific anatomic defects and the subsequent pathophysiology in flow dynamics may become more apparent when framed in three dimensional models. Given the evidence of improved comprehension using such modeling, this study aimed to contribute further to that understanding by comparing Virtual Reality (VR) and 3D printed models (3DP) in medical education.ObjectivesWe sought to systematically compare the perceived subjective effectiveness of Virtual Reality (VR) and 3D printed models (3DP) in the educational experience of residents and nurse practitioners.MethodsTrainees and practitioners underwent individual 15-minute teaching sessions in which features of a developmentally typical heart as well as a congenitally diseased heart were demonstrated using both Virtual Reality (VR) and 3D printed models (3DP). Participants then briefly explored each modality before filling out a short survey in which they identified which model (3DP or VR) they felt was more effective in enhancing their understanding of cardiac anatomy and associated pathophysiology. The survey included a binary summative assessment and a series of Likert scale questions addressing usefulness of each model type and degree of comfort with each modality.ResultsTwenty-seven pediatric residents and 3 nurse practitioners explored models of a developmentally typical heart and tetralogy of Fallot pathology. Most participants had minimal prior exposure to VR (1.1 ± 0.4) or 3D printed models (2.1 ± 1.5). Participants endorsed a greater degree of understanding with VR models (8.5 ± 1) compared with 3D Printed models (6.3 ± 1.8) or traditional models of instruction (5.5 ± 1.5) p < 0.001. Most participants felt comfortable with modern technology (7.6 ± 2.1). 87% of participants preferred VR over 3DP.ConclusionsOur study shows that, overall, VR was preferred over 3DP models by pediatric residents and nurse practitioners for understanding cardiac anatomy and pathophysiology.