3D Quantum Hall Research Articles

Simulating 4D quantum Hall effect with two bosons in a 1D quasicrystal

Recent advances promote the study of topological systems with additional synthetic dimensions. In this work, we propose a method to realize the four-dimensional (4D) quantum hall effect by using two strongly interacting bosons. The 1D lattice of the Aubry-André-Harper (AAH) model with two hard-core bosons can be mapped to a synthetic 4D space. The energy spectrum of this system is similar to that of one particle evolving in a 2D AAH model mimicking the 4D quantum hall effect. The energy spectrum contains bulk, edge, and corner states, which can be interpreted as the summation of two independent single-particle spectra in the 1D Aubry-André-Harper (AAH) model. Our results pave the way to realizing higher-dimension physics such as topology and localization by using many particles.

Importance of the semimetallic state for the quantum Hall effect in HfTe5

At ambient pressure, HfTe5 is a material at the boundary between a weak and a strong topological phase, which can be tuned by changes in its crystalline structure or by the application of high magnetic fields. It exhibits a Lifshitz transition upon cooling, and three-dimensional (3D) quantum Hall effect (QHE) plateaus can be observed at low temperatures. Here, we have investigated the electrical transport properties of HfTe5 under hydrostatic pressure up to 3 GPa. We find a pressure-induced crossover from a semimetallic phase at low pressures to an insulating phase at about 1.5 GPa. Our data suggest the presence of a pressure-induced Lifshitz transition at low temperatures within the insulating phase around 2 GPa. The quasi-3D QHE is confined to the low-pressure region in the semimetallic phase. This reveals the importance of the semimetallic ground state for the emergence of the QHE in HfTe5 and thus favors a scenario based on a low carrier density metal in the quantum limit for the observed signatures of the quasiquantized 3D QHE. Published by the American Physical Society 2024

3D quantum Hall effect in a topological nodal-ring semimetal

A quantized Hall conductance (not conductivity) in three dimensions has been searched for more than 30 years. Here we explore it in 3D topological nodal-ring semimetals, by employing a minimal model describing the essential physics. In particular, the bulk topology can be captured by a momentum-dependent winding number, which confines the drumhead surface states in a specific momentum region. This confinement leads to a surface quantum Hall conductance in a specific energy window in this 3D system. The winding number for the drumhead surface states and Chern number for their quantum Hall effect form a two-fold topological hierarchy. We demonstrate the one-to-one correspondence between the momentum-dependent winding number and wavefunction of the drumhead surface states. More importantly, we stress that breaking chiral symmetry is necessary for the quantum Hall effect of the drumhead surface states. The analytic theory can be verified numerically by the Kubo formula for the Hall conductance. We propose an experimental setup to distinguish the surface and bulk quantum Hall effects. The theory will be useful for ongoing explorations on nodal-ring semimetals.

Quantum oscillations and three-dimensional quantum Hall effect in ZrTe5

Recent experiments have reported a lot of spectacular transport properties in topological materials, such as quantum oscillations and three-dimensional (3D) quantum Hall effect (QHE) in ${\mathrm{ZrTe}}_{5}$. In this paper, by using a strong topological insulator model to describe ${\mathrm{ZrTe}}_{5}$, we study the magnetotransport property of the 3D system. With fixed carrier density, we find that there exists a deferring effect in the chemical potential, which favors distinguishing the saddle points of the inverted LLs. On the other hand, with fixed chemical potential, the features of 3D QHE are demonstrated and we attribute the underlying mechanisms to the interplay between Dirac fermions, magnetic field, and impurity scatterings.

Transverse Peierls Transition

We propose a new type of spontaneous symmetry breaking phase caused by softening of the transverse acoustic phonon modes through electron-phonon coupling. These new phases include the shear density wave and self-twisting wave, which are caused by softening of linearly and circularly polarized acoustic phonon modes, respectively. We propose that two of the topological semimetal systems in the quantum limit, where the electrons only occupy the lowest Landau bands under external magnetic field, will be the perfect systems to realize these new phases. Exotic physical effects will be induced in these new phases, including the 3D quantum Hall effect, chiral standing acoustic wave, magnetoacoustic effects, and chiral phonon correction to the Einstein–de Hass effect.1 MoreReceived 20 April 2022Revised 13 October 2022Accepted 23 January 2023DOI:https://doi.org/10.1103/PhysRevX.13.011027Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.Published by the American Physical SocietyPhysics Subject Headings (PhySH)Research AreasElectron-phonon couplingLandau levelsTopological materialsCondensed Matter, Materials & Applied Physics

Floquet Simulators for Topological Surface States in Isolation

We propose dynamical protocols allowing for the engineered realization of topological surface states in isolation. Our approach builds on the concept of synthetic dimensions generated by driving systems with incommensurate frequencies. As a concrete example, we consider 3d topological surface states of a 4d quantum Hall insulator via a $(1+2_\mathrm{syn})$-dimensional protocol. We present first principle analytical calculations demonstrating that no supporting 4d bulk phase is required for a 3d topological surface phase. We back the analytical approach by numerical simulations and present a detailed blueprint for the realization of the synthetic surface phase with existing quantum linear optical network device technology. We then discuss generalizations, including a proposal for a quantum simulator of the $(1+1_\mathrm{syn})$ dimensional surface of the common 3d topological insulator.

Topological Chern vectors in three-dimensional photonic crystals.

The paradigmatic example of a topological phase of matter, the two-dimensional Chern insulator1-5, is characterized by a topological invariant consisting of a single integer, the scalar Chern number. Extending the Chern insulator phase from two to three dimensions requires generalization of the Chern number to a three-vector6,7, similar to the three-dimensional (3D) quantum Hall effect8-13. Such Chern vectors for 3D Chern insulators have never been explored experimentally. Here we use magnetically tunable 3D photonic crystals to achieve the experimental demonstration of Chern vectors and their topological surface states. We demonstrate Chern vector magnitudes of up to six, higher than all scalar Chern numbers previously realized in topological materials. The isofrequency contours formed by the topological surface states in the surface Brillouin zone form torus knots or links, whose characteristic integers are determined by the Chern vectors. We demonstrate a sample with surface states forming a (2, 2) torus link or Hopf link in the surface Brillouin zone, which is topologically distinct from the surface states of other 3D topological phases. These results establish the Chern vector as an intrinsic bulk topological invariant in 3D topological materials, with surface states possessing unique topological characteristics.

Quantum Hall effect and magnetothermoelectric properties in a periodically modulated three-dimensional electron gas

In a periodically modulated three-dimensional (3D) electron gas subject to a magnetic field, the Hall conductivity exhibits quantized plateaus, which well correspond to the zero values of the transverse conductivity, a clear signature of the emergence of 3D quantum Hall effect (QHE). We develop a semiclassical theory for the 3D QHE system, taking into account the effect of the Landau level broadening and finite temperatures, to calculate the conductivities and thermoelectric transport coefficients. Our theory provides a concise unified theoretical description for the complex oscillation behavior of the conductivities and thermoelectric transport coefficients in a 3D QHE system. It may serve as a valuable assistance for understanding the simultaneously measured electrical and thermoelectric data in experiments.

Quantum Hall effect originated from helical edge states in Cd3As2

The recent experimental observations of the quantum Hall effect in three-dimensional (3D) topological semimetals have attracted great attention, but there are still debates on its origin. We systematically study the dependence of the quantum Hall effect in topological semimetals on the thickness, Fermi energy, and growth direction, taking into account the contributions from the Fermi-arc surface states, confinement-induced bulk subbands, and helical side-surface edge states. In particular, we focus on the intensively studied Dirac semimetal ${\mathrm{Cd}}_{3}{\mathrm{As}}_{2}$ and its slabs grown along experimentally accessible directions, including [001], [110], and [112]. We reveal an ignored mechanism from the Zeeman splitting of the helical edge states, which along with Fermi-arc 3D quantum Hall effect, may give a nonmonotonic dependence of the Hall conductance plateaus on the magnetic field in the most experimentally studied [112] direction slab. Our results will be insightful for exploring the quantum Hall effects beyond two dimensions.

Creating synthetic spaces for higher-order topological sound transport

Modern technological advances allow for the study of systems with additional synthetic dimensions. Higher-order topological insulators in topological states of matters have been pursued in lower physical dimensions by exploiting synthetic dimensions with phase transitions. While synthetic dimensions can be rendered in the photonics and cold atomic gases, little to no work has been succeeded in acoustics because acoustic wave-guides cannot be weakly coupled in a continuous fashion. Here, we formulate the theoretical principles and manufacture acoustic crystals composed of arrays of acoustic cavities strongly coupled through modulated channels to evidence one-dimensional (1D) and two-dimensional (2D) dynamic topological pumpings. In particular, the higher-order topological edge-bulk-edge and corner-bulk-corner transport are physically illustrated in finite-sized acoustic structures. We delineate the generated 2D and four-dimensional (4D) quantum Hall effects by calculating first and second Chern numbers and physically demonstrate robustness against the geometrical imperfections. Synthetic dimensions could provide a powerful way for acoustic topological wave steering and open up a platform to explore any continuous orbit in higher-order topological matter in dimensions four and higher.

Three-dimensional quantum Hall effect and magnetothermoelectric properties in Weyl semimetals

We numerically study the three-dimensional (3D) quantum Hall effect (QHE) and magnetothermoelectric transport of Weyl semimetals in the presence of disorder. We obtain a bulk picture that the exotic 3D QHE emerges in a finite range of Fermi energy around the Weyl points determined by the gap between the $n=\ensuremath{-}1$ and $n=1$ Landau levels (LLs). The quantized Hall conductivity is attributable to the chiral zeroth LLs traversing the gap, and is robust against disorder scattering for an intermediate number of layers in the direction of the magnetic field. Moreover, we predict several interesting characteristic features of the thermoelectric transport coefficients in the 3D QHE regime, which can be probed experimentally. This may open an avenue for exploring Weyl physics in topological materials.

Field-Tunable One-Sided Higher-Order Topological Hinge States in Dirac Semimetals.

Recently, higher-order topological matter and 3D quantum Hall effects have attracted a great amount of attention. The Fermi-arc mechanism of the 3D quantum Hall effect proposed to exist in Weyl semimetals is characterized by the one-sided hinge states, which do not exist in all the previous quantum Hall systems, and more importantly, pose a realistic example of the higher-order topological matter. The experimental effort so far is in the Dirac semimetal Cd_{3}As_{2}, where, however, time-reversal symmetry leads to hinge states on both sides of the top and bottom surfaces, instead of the aspired one-sided hinge states. We propose that under a tilted magnetic field, the hinge states in Cd_{3}As_{2}-like Dirac semimetals can be one sided, highly tunable by field direction and Fermi energy, and robust against weak disorder. Furthermore, we propose a scanning tunneling Hall measurement to detect the one-sided hinge states. Our results will be insightful for exploring not only the quantum Hall effects beyond two dimensions, but also other higher-order topological insulators in the future.

Three-dimensional quantum Hall effect in Weyl semimetals

We analytically study the three-dimensional (3D) quantum Hall effect (QHE) in a thin film of a Weyl semimetal from the perspective of bulk states. We derive the Chern numbers for $B\ensuremath{\ne}0$ from the Chern numbers for $B=0$ through a topological analysis and obtain a phase diagram of Chern numbers in Weyl semimetals. We demonstrate how the relative alignment of the Weyl nodes and the thickness of the film influence the quantum Hall plateaus and predict a peculiar phase diagram for the QHE in a thin film of a Weyl semimetal. Our work reveals the nature of the 3D QHE in Weyl semimetals from the bulk states.

Gap-Opening Transition in Dirac Semimetal ZrTe_{5}.

We apply ^{125}Te nuclear magnetic resonance (NMR) spectroscopy to investigate the Dirac semimetal ZrTe_{5}. With the NMR magnetic field parallel to the b axis, we observe significant quantum magnetic effects. These include an abrupt drop at 150K in spin-lattice relaxation rate. This corresponds to a gap-opening transition in the Dirac carriers, likely indicating the onset of excitonic pairing. Below 50K, we see a more negative shift for the Te_{z} bridging site, indicating the repopulation of Dirac levels with spin polarized carriers at these temperatures. This is the previously reported 3D quantum Hall regime; however, we see no sign of a charge density wave as has been proposed.

Proposal for engineering 3D quantum Hall effect in an electronic superlattice

The three-dimensional (3D) quantum Hall effect (3DQHE) was initially proposed to be realized in systems with spontaneous charge-density-wave (CDW) or spin-density-wave (SDW), which has stimulated recent experimental progress in this direction. Here, instead of such intrinsic scenarios, we propose to realize the 3DQHE in a synthetic semiconductor superlattice. The superlattice is engineered along one direction, which is modeled by the Kronig-Penney type periodic potential. By applying a magnetic field along this direction, quantized 3D Hall conductivity can be achieved in certain parameter regimes, along with a vanishing transverse conductivity. We show that such results are robust against the disorder effect and can be hopefully realized by state-of-the-art fabrication techniques. Our work opens a new research avenue for exploring the 3DQHE in electronic superlattice structures.

Theoretical study of 3D quantum Hall effect in periodic electron system

The exsitance of three-dimensional Hall effect (3DQHE) due to spontaneous Fermi surface instabilities in magnetic field was proposed decades ago, and has stimulated recent progress in experiments. The reports in recent experiments show that the Hall plateaus and vanishing transverse magneto-resistivities (TMRs) (which are two main signatures of 3DQHE) are not easy to be observed in natural materials. And two main different explanations of the slow varying slope like Hall plateaus and non-vanishing TMRs (which can be called as quasi-quantized Hall effect (QQHE)) have been proposed. By studying the magneto-transport with a simple effective periodic 3D system, we show how 3DQHE can be achieved in certain parameter regimes at first. We find two new mechanisms that may give rise to QQHE. One mechanism is the low Fermi energy effect, and the other is the strong impurity effect. Our studies also proved that the artificial superlattice is an ideal platform for realizing 3DQHE with high layer barrier periodic potential.

Theory for the Charge-Density-Wave Mechanism of 3D Quantum Hall Effect.

The charge-density-wave (CDW) mechanism of the 3D quantum Hall effect has been observed recently in ZrTe_{5} [Tang etal., Nature 569, 537 (2019)10.1038/s41586-019-1180-9]. Different from previous cases, the CDW forms on a one-dimensional (1D) band of Landau levels, which strongly depends on the magnetic field. However, its theory is still lacking. We develop a theory for the CDW mechanism of 3D quantum Hall effect. The theory can capture the main features in the experiments. We find a magnetic field induced second-order phase transition to the CDW phase. We find that electron-phonon interactions, rather than electron-electron interactions, dominate the order parameter. We extract the electron-phonon coupling constant from the non-Ohmic I-V relation. We point out a commensurate-incommensurate CDW crossover in the experiment. More importantly, our theory explores a rare case, in which a magnetic field can induce an order-parameter phase transition in one direction but a topological phase transition in other two directions, both depend on one magnetic field.

Digging into the 3D Quantum Hall Effect

Digging into the 3D Quantum Hall Effect

Thouless conductances of a three-dimensional quantum Hall system

We investigate the longitudinal conductance of a disordered three-dimensional (3D) quantum Hall system within a tight-binding lattice model using numerical Thouless conductance calculations. For the bulk, we confirm that the mobility edges are independent of the propagating directions in this anisotropic system. As disorder increases, the conductance peak of the lowest subband in the horizontal direction floats to the central subband as in the two-dimensional (2D) case, while there is no clear evidence of floating in the vertical direction. We thus conclude that for extended states, the longitudinal conductance in the vertical direction behaves like a quasi-one-dimensional (1D) normal metal, while the longitudinal conductance in the horizontal direction is controlled by layered conducting states stacked coherently. Inside the quantum Hall gap, we study the novel 2D chiral surface states at the sidewalls of the sample. We demonstrate the crossover of the surface states between the quasi-1D metal and insulator regimes, which can be achieved by modifying the interlayer hopping strength and the disorder strength in the model. The typical behaviors of the Thouless conductance and the wave functions of the surface states in these two regimes are investigated. Finally, in order to predict the regime of the surface states for arbitrary parameters, we determine an explicit relationship between the localization length of surface states and the microscopic parameters of the model.

3D Quantum Hall Effect and a Global Picture of Edge States in Weyl Semimetals.

We investigate the 3D quantum Hall effect in Weyl semimetals and elucidate a global picture of the edge states. The edge states hosting 3D quantum Hall effect are combinations of Fermi arcs and chiral Landau bands dispersing along the magnetic field direction. The Hall conductance, σ_{xz}^{H} [see Fig.4], shows quantized plateaus with the variance of the magnetic field when the Fermi level is at the Weyl node. However, the chiral Landau bands can change the spatial distribution of the edge states, especially under a tilted magnetic field, and the resulting edge states lead to distinctive Hall transport phenomena. A tilted magnetic field contributes an intrinsic value to σ_{xz}^{H} and such an intrinsic value is determined by the tilting angle θ between the magnetic field and the y axis [see Fig.1(c)]. Particularly, even if the perpendicular magnetic field is fixed, σ_{xz}^{H} will change its sign with an abrupt spatial shift of the edge states when θ exceeds a critical angle θ_{c}. Our work uncovers the novel edge-state nature of the 3D quantum Hall effect in Weyl semimetals.