3D Pellet Research Articles

Rapid DNA Repair in Mesenchymal Stem Cells and Bone Regeneration by Nanoparticle-Based Codelivery of Nrf2-mRNA and Dexamethasone.

Directional differentiation is a key factor determining the result of stem cell therapy. Herein, we developed a polyethylenimine (PEI)-coated poly(lactic-co-glycolic) acid (PLGA) nanoparticle (mPDN) carrying both nuclear factor erythroid 2-related factor 2 (Nrf2) mRNA and dexamethasone (Dex) to human mesenchymal stem cells (hMSCs). The combination of Dex and Nrf2-mRNA delivered by mPDN promoted the osteogenic differentiation of hMSCs. In particular, Nrf2-mRNA rapidly reduced the DNA damage caused by ROS due to early and efficient gene expression at 3 h after treatment, which was not achieved in traditional pDNA systems. High and rapid transfection, effective ROS-scavenging effect, and protection of mitochondrial dynamics were observed in hMSCs after treatment with the resulting Nrf2-mPDN. Osteogenic differentiation was also observed in 3D pellets for up to 5 weeks. Finally, the effects of rapid DNA repair in hMSCs by Nrf2-mPDN and on in vivo bone regeneration were evaluated in a rat femoral bone defect model using CT. This study demonstrated the potential of an NP-based codelivery system and efficient transfection of mRNA at early stages in hMSCs for bone regeneration and stem cell therapy.

TNFα-Induced Inflammation Model-Evaluation of Concentration and Passage-Dependent Effects on Bovine Chondrocytes.

Inflammation models are widely used in the in vitro investigation of new therapeutic approaches for osteoarthritis. TNFα (tumor necrosis factor alpha) plays an important role in the inflammatory process. Current inflammation models lack uniformity and make comparisons difficult. Therefore, this study aimed to systematically investigate whether the effects of TNFα are concentration-dependent and whether chondrocyte expansion has an effect on the inflammatory model. Bovine chondrocytes were enzymatically isolated, expanded to passages 1-3, and transferred into a 3D pellet culture. Chondrocyte pellets were stimulated with recombinant bovine TNFα at different concentrations for 48 h to induce inflammation. Gene expression of anabolic (collagen 2, aggrecan, cartilage oligomeric protein (COMP)), catabolic (matrix metalloproteinases (MMP3, MMP13)), dedifferentiation (collagen 1) markers, inflammation markers (interleukin-6 (IL-6), nuclear factor kappa B (NFkB), cyclooxygenase-2 (COX), prostaglandin-E-synthase-2 (PTGES2)), and the apoptosis marker caspase 3 was determined. At the protein level, concentrations of IL-6, nitric oxide (NO), and sulfated glycosaminoglycans (GAG) were evaluated. Statistical analysis was performed using the independent t-test, and significance was defined as p < 0.05. In general, TNFα caused a decrease in anabolic markers and an increase in the expression of catabolic and inflammatory markers. There was a concentration-dependent threshold of 10 ng/mL to induce significant inflammatory effects. Most of the markers analyzed showed TNFα concentration-dependent effects (COMP, PRG4, AGN, Col1, MMP3, and NFkB). There was a statistical influence of selected gene expression markers from different passages on the TNFα chondrocyte inflammation model, including Col2, MMP13, IL-6, NFkB, COX2, and PTGES2. Considering the expression of collagen 2 and MMP3, passage 3 chondrocytes showed a higher sensitivity to TNFα stimulation compared to passages 1 and 2. On the other hand, MMP13, IL-6, NFkB, and caspase 3 gene expression were lower in P3 chondrocytes compared to the other passages. On the protein level, inflammatory effects showed a similar pattern, with cytokine effects starting at 10 ng/mL and differences between the passages. TNFα had a detrimental effect on cartilage, with a clear threshold observed at 10 ng/mL. Although TNFα effects showed concentration-dependent patterns, this was not consistent for all markers. The selected passage showed a clear influence, especially on inflammation markers. Further experiments were warranted to explore the effects of TNFα concentration and passage in long-term stimulation.

Plasticity Comparison of Two Stem Cell Sources with Different Hox Gene Expression Profiles in Response to Cobalt Chloride Treatment during Chondrogenic Differentiation.

The limited self-repair capacity of articular cartilage is a challenge for healing injuries. While mesenchymal stem/stromal cells (MSCs) are a promising approach for tissue regeneration, the criteria for selecting a suitable cell source remain undefined. To propose a molecular criterion, dental pulp stem cells (DPSCs) with a Hox-negative expression pattern and bone marrow mesenchymal stromal cells (BMSCs), which actively express Hox genes, were differentiated towards chondrocytes in 3D pellets, employing a two-step protocol. The MSCs' response to preconditioning by cobalt chloride (CoCl2), a hypoxia-mimicking agent, was explored in an assessment of the chondrogenic differentiation's efficiency using morphological, histochemical, immunohistochemical, and biochemical experiments. The preconditioned DPSC pellets exhibited significantly elevated levels of collagen II and glycosaminoglycans (GAGs) and reduced levels of the hypertrophic marker collagen X. No significant effect on GAGs production was observed in the preconditioned BMSC pellets, but collagen II and collagen X levels were elevated. While preconditioning did not modify the ALP specific activity in either cell type, it was notably lower in the DPSCs differentiated pellets compared to their BMSCs counterparts. These results could be interpreted as demonstrating the higher plasticity of DPSCs compared to BMSCs, suggesting the contribution of their unique molecular characteristics, including their negative Hox expression pattern, to promote a chondrogenic differentiation potential. Consequently, DPSCs could be considered compelling candidates for future cartilage cell therapy.

Demonstration of Self-Assembled Cell Sheet Culture and Manual Generation of a 3D Tendon/Ligament-Like Organoid by using Human Dermal Fibroblasts.

Tendons and ligaments (T/L) are strong hierarchically organized structures unitingthemusculoskeletal system. These tissues have a strictly arranged collagen typeI-rich extracellular matrix (ECM) and T/L-lineage cells mainly positioned in parallel rows. After injury, T/L require a long time for rehabilitation with high failure risk and often unsatisfactory repair outcomes. Despite recent advancements in T/L biology research, one of the remaining challenges is that the T/L field still lacks a standardized differentiation protocol that is able to recapitulate T/L formation process in vitro. For example, bone and fat differentiation of mesenchymal precursor cells require just standard two-dimensional (2D) cell culture and the addition of specific stimulation media. For differentiation to cartilage, three-dimensional (3D) pellet culture and supplementation of TGFß is necessary. However, cell differentiation to tendon needs a very orderly 3D culture model, which ideally should also be subjectable to dynamic mechanical stimulation. We have established a 3-step (expansion, stimulation, and maturation) organoid model to form a 3D rod-like structure out of a self-assembled cell sheet, which delivers a natural microenvironment with its own ECM, autocrine, and paracrine factors. These rod-like organoids have a multi-layered cellular architecture within rich ECM and can be handled quite easily for exposure to static mechanical strain. Here, we demonstrated the 3-step protocol by using commercially available dermal fibroblasts. We could show that this cell type forms robust and ECM-abundant organoids. The described procedure can be further optimized in terms of culture media and optimized toward dynamic axial mechanical stimulation. In the same way, alternative cell sources can be tested for their potential to form T/L organoids and thus undergo T/L differentiation. In sum, the established 3D T/L organoid approach can be used as a model for tendon basic research and even for scaffold-free T/L engineering.

Xenia introduces 3D printing pellet version of unfilled PVDF and carbon-fiber reinforced compounds

Xenia® Materials, a developer of carbon fiber reinforced polymers, has presented its new range of PVDF-based compounds for 3D printing pellet-fed applications. This new group of materials is claimed to ensure the carbon fiber properties mixed with the PVDF features, which should open new opportunities for additive manufacturing production where high performance and chemical resistance is necessary.

Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling

Li1.3Al0.3Ti1.7(PO4)3 (LATP) NASICON(Na Super Ion Conductive)-type solid electrolyte is prepared using conventional wet ball-milling and dry 3D mixing techniques to investigate the influence of mixing technique on properties of LATP. The mixing techniques influence impurity formation of calcined LATP powder. Thus, sintering behavior of the calcined powders is also affected by the mixing technique, i.e. LiTiPO5 formation is confirmed in the ball-milling samples and Li-ion conductive Li4P2O7 is main impurity in the 3D mixing samples. The influence is not limited to impurity formation. Uniform grains are observed in the 3D mixing pellet, contrarily, non-uniform sintering occurs in the ball-milling sample. As a result, the 3D mixing pellets demonstrate higher Li-ion conductivity than the ball-mill samples. The dry 3D mixing technique, which can omit drying process, is promising for LATP preparation owing to simplification of preparation process and a formation of high Li-ion conductive LATP pellets. Also, this study clearly shows that the mixing techniques affect ionic conductivity of the sintered LATP significantly, emphasizing importance of mixing procedure in the solid-state reaction.

SENESCENCE OR APOPTOSIS: CHONDROCYTE RESPONSE TO INFLAMMATION IN VITRO IS DEPENDENT ON ITS DIMENSIONAL ENVIRONMENT

Cell culture on tissue culture plastic (TCP) is widely used across biomedical research to understand the in vivo environment of a targeted biological system. However, growing evidence indicates that the characteristics of cells investigated in this way differ substantially from their characteristics in the human body. The limitations of TCP monolayer cell cultures are especially relevant for chondrocytes, the cell population responsible for producing cartilage matrix, because their zonal organization in hyaline cartilage is not preserved in a flattened monolayer assay. Here, we contrast the response of primary human chondrocytes to inflammatory cytokines, tumor necrosis factor-alpha and interferon-gamma, via transcriptional, translational, and histological profiling, when grown either on TCP or within a 3D cell pellet (scaffold-less). We focus on anti-apoptotic (Bcl2), pro-apoptotic (Bax, Mff, Fis1), and senescent (MMP13, MMP1, PCNA, p16, p21) markers. We find that the 3D environment of the chondrocyte has a profound effect on the behavior and fate of the cell; in TCP monolayer cultures, chondrocytes become anti-apoptotic and undergo senescence in response to inflammatory cytokines, whereas in 3D cell pellet cultures, they exhibit a pro-apoptotic response. Our findings demonstrate that chondrocyte culture environment plays a pivotal role in cell behavior, which has important implications for the clinical applicability of in vitro research of cartilage repair. Although there are practical advantages to 2D cell cultures, our data suggest researchers should be cautious when drawing conclusions if they intend to extrapolate findings to in vivo phenomena. Our data demonstrates opposing chondrocyte responses in relation to apoptosis and senescence, which appear to be solely reliant on the environment of the culture system. This biological observation highlights that proper experimental design is crucial to increase the clinical utility of cartilage repair experiments and streamline their translation to therapy development.

SENESCENCE OR APOPTOSIS: CHONDROCYTE RESPONSE TO INFLAMMATION IN VITRO IS DEPENDENT ON ITS DIMENSIONAL ENVIRONMENT

AbstractBACKGROUNDCell culture on tissue culture plastic (TCP) is widely used across biomedical research to understand the in vivo environment of a targeted biological system. However, growing evidence indicates that the characteristics of cells investigated in this way differ substantially from their characteristics in the human body. The limitations of TCP monolayer cell cultures are especially relevant for chondrocytes, the cell population responsible for producing cartilage matrix, because their zonal organization in hyaline cartilage is not preserved in a flattened monolayer assay.OBJECTIVEHere, we contrast the response of primary human chondrocytes to inflammatory cytokines, tumor necrosis factor-alpha and interferon-gamma, via transcriptional, translational, and histological profiling, when grown either on TCP or within a 3D cell pellet (scaffold-less). We focus on anti-apoptotic (Bcl2), pro-apoptotic (Bax, Mff, Fis1), and senescent (MMP13, MMP1, PCNA, p16, p21) markers.RESULTSWe find that the 3D environment of the chondrocyte has a profound effect on the behavior and fate of the cell; in TCP monolayer cultures, chondrocytes become anti-apoptotic and undergo senescence in response to inflammatory cytokines, whereas in 3D cell pellet cultures, they exhibit a pro-apoptotic response.CONCLUSIONOur findings demonstrate that chondrocyte culture environment plays a pivotal role in cell behavior, which has important implications for the clinical applicability of in vitro research of cartilage repair. Although there are practical advantages to 2D cell cultures, our data suggest researchers should be cautious when drawing conclusions if they intend to extrapolate findings to in vivo phenomena. Our data demonstrates opposing chondrocyte responses in relation to apoptosis and senescence, which appear to be solely reliant on the environment of the culture system. This biological observation highlights that proper experimental design is crucial to increase the clinical utility of cartilage repair experiments and streamline their translation to therapy development.Declaration of Interest(b) declare that there is no conflict of interest that could be perceived as prejudicing the impartiality of the research reported:I declare that there is no conflict of interest that could be perceived as prejudicing the impartiality of the research project.

Evaluation of a synthetic peptide-based bioink (PeptiInk Alpha 1) for in vitro 3D bioprinting of cartilage tissue models

Cartilage pathology in human disease is poorly understood and requires further research. Various attempts have been made to study cartilage pathologies using in vitro human cartilage models as an alternative for preclinical research. Three-dimensional (3D) bioprinting is a technique that has been used to 3D-bioprint cartilage tissue models in vitro using animal-derived materials such as gelatine or hyaluronan, which present challenges in terms of scalability, reproducibility, and ethical concerns. We present an assessment of synthetic self-assembling peptides as bioinks for bioprinted human in vitro cartilage models. Primary human chondrocytes were mixed with PeptiInk Alpha 1, 3D-bioprinted and cultured for 14 days, and compared with 3D chondrocyte pellet controls. Cell viability was assessed through LIVE/DEAD assays and DNA quantification. High cell viability was observed in the PeptiInk culture, while a fast decrease in DNA levels was observed in the 3D pellet control. Histological evaluation using hematoxylin and eosin staining and immunofluorescence labeling for SOX-9, collagen type II, and aggrecan showed a homogeneous cell distribution in the 3D-bioprinted PeptiInks as well as high expression of chondrogenic markers in both control and PeptiInk cultures. mRNA expression levels assessed by - qRT-PCR (quantitative real time-polymerase chain reaction) confirmed chondrogenic cell behavior. These data showed promise in the potential use of PeptiInk Alpha 1 as a bioprintable manufacturing material for human cartilage in vitro models.

Infra-patellar fat pad-derived mesenchymal stem cells maintain their chondrogenic differentiation potential after arthroscopic harvest with blood-product supplementation

PurposeMesenchymal stem cells/medicinal signaling cells (MSCs) possess therapeutic potential and are used in regenerative orthopaedics. The infra-patellar fat pad (IFP) is partially resected during knee arthroscopy (KASC) and contains MSCs. Heat, irrigation, and mechanical stress during KASC may decrease MSC’s therapeutic potential. This study assessed MSCs’ regenerative potential after arthroscopic IFP harvest and potential effects of two blood products (BP) (platelet-rich plasma (PRP), hyperacute serum (HAS)) on MSCs’ viability and chondrogenic differentiation capacity.MethodsIFP was arthroscopically harvested, isolated, and counted (n = 5). Flow cytometry was used to assess cell viability via staining with annexin V/7-AAD and stemness markers via staining for CD90, CD73, and CD105. MSCs were incubated with blood products, and metabolic activity was determined via an XTT assay. Deposition of cartilage extracellular matrix was determined in histologic sections of chondrogenically differentiated 3D pellet cultures via staining with Alcian Blue. Expression of cartilage-specific genes (SOX9, MMP3/13, ACAN, COL1/2) was analyzed via quantitative PCR.ResultsMSC isolation from IFP yielded 2.66*106 ± 1.49*106 viable cells from 2.7 (0.748) g of tissue. MSC markers (CD 90/105/73) were successfully detected and annexin V staining showed 81.5% viable cells. XTT showed increased metabolic activity. Within the BP groups, this increase was significant (days 0–14, p < 0.05). PCR showed expression of cartilage-specific genes in each group. COL2 (p < 0.01) as well as ACAN (p < 0.001) expression levels were significantly higher in the HAS group. Histology showed successful differentiation.ConclusionArthroscopic harvest of IFP-MSCs yields sufficient cells with maintained regenerative potential and viability. Blood products further enhance MSCs’ viability.

Immunomodulatory potential of mesenchymal stromal cell-derived extracellular vesicles in chondrocyte inflammation.

Osteoarthritis (OA) affects a large percentage of the population worldwide. Current surgical and nonsurgical concepts for treating OA only result in symptom-modifying effects. However, there is no disease-modifying therapy available. Extracellular vesicles released by mesenchymal stem/stromal cells (MSC-EV) are promising agents to positively influence joint homeostasis in the osteoarthritic surroundings. This pilot study aimed to investigate the effect of characterized MSC-EVs on chondrogenesis in a 3D chondrocyte inflammation model with the pro-inflammatory cytokine TNFα. Bovine articular chondrocytes were expanded and transferred into pellet culture at passage 3. TNFα, human MSC-EV preparations (MSC-EV batches 41.5-EVi1 and 84-EVi), EVs from human platelet lysate (hPL4-EV), or the combination of TNFα and EVs were supplemented. To assess the effect of MSC-EVs in the chondrocyte inflammation model after 14 days, DNA, glycosaminoglycan (GAG), total collagen, IL-6, and NO release were quantified, and gene expression of anabolic (COL-II, aggrecan, COMP, and PRG-4), catabolic (MMP-3, MMP-13, ADAMTS-4 and ADAMTS-5), dedifferentiation (COL-I), hypertrophy (COL-X, VEGF), and inflammatory (IL-8) markers were analyzed; histological evaluation was performed using safranin O/Fast Green staining and immunohistochemistry of COL I and II. For statistical evaluation, nonparametric tests were chosen with a significance level of p < 0.05. TNFα supplementation resulted in catabolic stimulation with increased levels of NO and IL-6, upregulation of catabolic gene expression, and downregulation of anabolic markers. These findings were supported by a decrease in matrix differentiation (COL-II). Supplementation of EVs resulted in an upregulation of the chondrogenic marker PRG-4. All MSC-EV preparations significantly increased GAG retention per pellet. In contrast, catabolic markers and IL-8 expression were upregulated by 41.5-EVi1. Regarding protein levels, IL-6 and NO release were increased by 41.5-EVi1. Histologic and immunohistochemical evaluations indicated a higher differentiation potential of chondrocytes treated with 84-EVi. MSC-EVs can positively influence chondrocyte matrix production in pro-inflammatory surroundings, but can also stimulate inflammation. In this study MSC-EV 41.5-EVi1 supplementation increased chondrocyte inflammation, whereas MSC-84-EVi supplementation resulted a higher chondrogenic potential of chondrocytes in 3D pellet culture. In summary, the selected MSC-EVs exhibited promising chondrogenic effects indicating their significant potential for the treatment of OA; however, the functional heterogeneity in MSC-EV preparations has to be solved.

The recombinant Link module of human TSG-6 suppresses cartilage damage in models of osteoarthritis: A potential disease-modifying OA drug

To investigate the role of endogenous TSG-6 in human osteoarthritis (OA) and assess the disease-modifying potential of a TSG-6-based biological treatment in cell, explant and animal models of OA. Knee articular cartilages from OA patients were analyzed for TSG-6 protein and mRNA expression using immunohistochemistry and RNAscope, respectively. The inhibitory activities of TSG-6 and its isolated Link module (Link_TSG6) on cytokine-induced degradation of OA cartilage explants were compared. Human mesenchymal stem/stromal cell-derived chondrocyte pellet cultures were used to determine the effects of Link_TSG6 and full-length TSG-6 on IL-1α-, IL-1β-, or TNF-stimulated ADAMTS4, ADAMTS5, and MMP13 mRNA expression. Link_TSG6 was administered i.a. to the rat ACLTpMMx model; cartilage damage and tactile allodynia were assessed. TSG-6 is predominantly associated with chondrocytes in regions of cartilage damage where high TSG-6 expression aligns with low MMP13, the major collagenase implicated in OA progression. Link_TSG6 is more potent than full-length TSG-6 at inhibiting cytokine-mediated matrix breakdown in human OA cartilage explants;>50% of donor cartilages, from 59 tested, were responsive to Link_TSG6 treatment. Link_TSG6 also displayed more potent effects in 3D pellet cultures, suppressing ADAMTS4, ADAMTS5, and MMP13 gene expression, which was consistent with reduced aggrecanase and collagenase activities in explant cultures. Link_TSG6 treatment reduced touch-evoked pain behavior and dose-dependently inhibited cartilage damage in a rodent model of surgically-induced OA. Link_TSG6 has enhanced chondroprotective activity compared to the full-length TSG-6 protein and shows potential as a disease modifying OA drug via its inhibition of aggrecanase and collagenase activity.

Modeling human skeletal development using human pluripotent stem cells

Chondrocytes and osteoblasts differentiated from induced pluripotent stem cells (iPSCs) will provide insights into skeletal development and genetic skeletal disorders and will generate cells for regenerative medicine applications. Here, we describe a method that directs iPSC-derived sclerotome to chondroprogenitors in 3D pellet culture then to articular chondrocytes or, alternatively, along the growth plate cartilage pathway to become hypertrophic chondrocytes that can transition to osteoblasts. Osteogenic organoids deposit and mineralize a collagen I extracellular matrix (ECM), mirroring invivo endochondral bone formation. We have identified gene expression signatures at key developmental stages including chondrocyte maturation, hypertrophy, and transition to osteoblasts and show that this system can be used to model genetic cartilage and bone disorders.

Functionally Graded Multilayer Composites Based on Poly(D,L lactide)/Bioactive Fillers Fabricated by a 3D Direct Pellet Printing Multi-Extrusion Process

The aim of the present work was to investigate a 3D manufacturing process dealing with 3D Direct Pellet multi-Extrusion (DPPmE). Throughout this paper, various functionally graded materials (FGM) were obtained with tailored properties for bone regeneration. Therefore, an experimental investigation was performed to gain a better understanding of the structure-processing-properties relationships. A poly(D,l-lactic acid) (PDLLA) matrix and bioglass (BG) or hydroxyapatite (HA) bioactive fillers were chosen to obtain hybrid FGM in comparison to composite references. Different compositions and shape factors (from microspheres to fibers) of these bioactive fillers were used to control the PDLLA matrix degradation. Then, different strategies of DPPmE were used to tailor and tune the desired gradient of properties. Interestingly, good interfaces and adhesion properties were obtained. Subsequently, rheological, size-exclusion chromatography, and porosity measurements corroborated the present findings. Besides, tensile as well as thermomechanical properties showed the advantages of the DPPmE process to fabricate FGM composites with tailored architectures.

Chondrogenic Differentiation of Human-Induced Pluripotent Stem Cells.

The generation of large quantities of genetically defined human chondrocytes remains a critical step for the development of tissue engineering strategies for cartilage regeneration and high-throughput drug screening. This protocol describes chondrogenic differentiation of human-induced pluripotent stem cells (hiPSCs), which can undergo genetic modification and the capacity for extensive cell expansion. The hiPSCs are differentiated in a stepwise manner in monolayer through the mesodermal lineage for 12days using defined growth factors and small molecules. This is followed by 28days of chondrogenic differentiation in a 3D pellet culture system using transforming growth factor beta 3 and specific compounds to inhibit off-target differentiation. The 6-week protocol results in hiPSC-derived cartilaginous tissue that can be characterized by histology, immunohistochemistry, and gene expression or enzymatically digested to isolate chondrocyte-like cells. Investigators can use this protocol for experiments including genetic engineering, in vitro disease modeling, or tissue engineering.

Suramin enhances chondrogenic properties by regulating the p67phox/PI3K/AKT/SOX9 signalling pathway.

Autologous chondrocyte implantation (ACI) is a promising treatment for articular cartilage degeneration and injury; however, it requires a large number of human hyaline chondrocytes, which often undergo dedifferentiation during in vitro expansion. This study aimed to investigate the effect of suramin on chondrocyte differentiation and its underlying mechanism. Porcine chondrocytes were treated with vehicle or various doses of suramin. The expression of collagen, type II, alpha 1 (COL2A1), aggrecan (ACAN); COL1A1; COL10A1; SRY-box transcription factor 9 (SOX9); nicotinamide adenine dinucleotide phosphate (NADPH) oxidase (NOX); interleukin (IL)-1β; tumour necrosis factor alpha (TNFα); IL-8; and matrix metallopeptidase 13 (MMP-13) in chondrocytes at both messenger RNA (mRNA) and protein levels was determined by quantitative reverse transcriptase polymerase chain reaction (qRT-PCR) and western blot. In addition, the supplementation of suramin to redifferentiation medium for the culture of expanded chondrocytes in 3D pellets was evaluated. Glycosaminoglycan (GAG) and collagen production were evaluated by biochemical analyses and immunofluorescence, as well as by immunohistochemistry. The expression of reactive oxygen species (ROS) and NOX activity were assessed by luciferase reporter gene assay, immunofluorescence analysis, and flow cytometry. Mutagenesis analysis, Alcian blue staining, reverse transcriptase polymerase chain reaction (RT-PCR), and western blot assay were used to determine whether p67phox was involved in suramin-enhanced chondrocyte phenotype maintenance. Suramin enhanced the COL2A1 and ACAN expression and lowered COL1A1 synthesis. Also, in 3D pellet culture GAG and COL2A1 production was significantly higher in pellets consisting of chondrocytes expanded with suramin compared to controls. Surprisingly, suramin also increased ROS generation, which is largely caused by enhanced NOX (p67phox) activity and membrane translocation. Overexpression of p67phox but not p67phoxAD (deleting amino acid (a.a) 199 to 212) mutant, which does not support ROS production in chondrocytes, significantly enhanced chondrocyte phenotype maintenance, SOX9 expression, and AKT (S473) phosphorylation. Knockdown of p67phox with its specific short hairpin (sh) RNA (shRNA) abolished the suramin-induced effects. Moreover, when these cells were treated with the phosphoinositide 3-kinase/protein kinase B (PI3K/AKT) inhibitor LY294002 or shRNA of AKT1, p67phox-induced COL2A1 and ACAN expression was significantly inhibited. Suramin could redifferentiate dedifferentiated chondrocytes dependent on p67phox activation, which is mediated by the PI3K/AKT/SOX9 signalling pathway.Cite this article: Bone Joint Res2022;11(10):693-708.

Redesign of a 3D Low Cost Filament Printer, Adapting it to a Pellet Extruder for New Material Assays

AbstractThe present work arises from the need identified on the additive manufacturing field due to the lack of 3D low cost pellet printers and the little diversity of materials available for 3D FFF printing. Considering this problem, a 3D pellet printer design is proposed starting from a 3D FFF printer. To carry out this design work, at first it is selected a commercial pellet extruder which meets all the conditions to provide a proper printing quality. At second, a new mechanical propose is analyzed and tested by simulation programs considering the changes made. In the course of the mechanical analysis, the structure is reviewed, and also a temperature study is accomplished. Based on the results, it is possible to verify the correct performance of the machine. From the different simulations, the optimal conditions in terms of dimensioning, structure, internal temperatures, and loads are obtained. This enables to determine an optimal and functional design which adapts into a commercial pellet extruder keeping low costs and simple implementation.

Conditioned media derived from human fetal progenitor cells improves skin regeneration in burn wound healing.

Stem cells are known to have excellent regenerative ability, which is primarily facilitated by indirect paracrine factors, rather than via direct cell replacement. The regenerative process is mediated by the release of extracellular matrix molecules, cytokines, and growth factors, which are also present in the media during cultivation. Herein, we aimed to demonstrate the functionality of key factors and mechanisms in skin regeneration through the analysis of conditioned media derived from fetal stem cells. A series of processes, including 3D pellet cultures, filtration and lyophilization is developed to fabricate human fetal cartilage-derived progenitor cells-conditioned media (hFCPCs-CM) and its useful properties are compared with those of human bone marrow-derived MSCs-conditioned media (hBMSCs-CM) in terms of biochemical characterization, and in vitro studies of fibroblast behavior, macrophage polarization, and burn wound healing. The hFCPCs-CM show to be devoid of cellular components but to contain large amounts of total protein, collagen, glycosaminoglycans, and growth factors, including IGFBP-2, IGFBP-6, HGF, VEGF, TGF β3, and M-CSF, and contain a specific protein, collagen alpha-1(XIV) compare with hBMSCs-CM. The therapeutic potential of hFCPCs-CM observes to be better than that of hBMSCs-CM in the viability, proliferation, and migration of fibroblasts, and M2 macrophage polarization in vitro, and efficient acceleration of wound healing and minimization of scar formation in third-degree burn wounds in a rat model. The current study shows the potential therapeutic effect of hFCPCs and provides a rationale for using the secretome released from fetal progenitor cells to promote the regeneration of skin tissues, both quantitatively and qualitatively. The ready-to-use product of human fetal cartilage-derived progenitor cells-conditioned media (hFCPCs-CM) are fabricated via a series of techniques, including a 3D culture of hFCPCs, filtration using a 3.5kDa cutoff dialysis membrane, and lyophilization of the CM. hFCPCs-CM contains many ECM molecules and biomolecules that improves wound healing through efficient acceleration of M2 macrophage polarization and reduction of scar formation.

Induction of chondrogenesis with a RANKL-binding peptide, WP9QY, in vitro and in vivo in a rabbit model

WP9QY (W9) is a receptor activator of nuclear factor-κB ligand (RANKL)-binding peptide that inhibits osteoclastogenesis by blunting the RANKL-RANK interaction, and also increases osteoblastogenesis via RANKL reverse signaling. W9 has dual effects on osteoclasts and osteoblasts; however, it is unknown whether the peptide has an effect on chondrocytes. Here, we report that W9 induces proliferation and differentiation of chondrocytes in vitro and repairs full-thickness articular cartilage defects in vivo. W9 stimulated chondrocyte differentiation in a two-dimensional (2D) culture of human mesenchymal stem cells (hMSCs), and transforming growth factor β3 (TGF-β3) showed synergistic effects with W9 on chondrogenesis. W9 enlarged the size of 3D pellet cultures of hMSCs and produced chondrocyte-specific matrices, especially in combined treatment with TGF-β3. The peptide also stimulated proliferation of hMSCs with induction of expression of chondrogenesis-related genes. Several RANKL inhibitors had no effect on chondrocytic differentiation. RANKL-knockdown experiments showed that W9 did not induce chondrogenesis through RANKL, but did induce osteoblastogenesis through RANKL. Intraarticular injection of W9 resulted in significant repair of full-thickness articular cartilage defects in rabbits. Taken together, these results suggest that W9 ameliorates the articular cartilage defects by increasing the volume of cartilaginous matrices with accompanying induction of proliferation and differentiation of chondrocytes via mechanisms independent of RANKL inhibition and RANKL reverse signaling. Since no pharmaceuticals are clinically available for treatment of cartilage damage such as osteoarthritis, our findings demonstrate the potential of W9 to address the unmet medical needs.

Eldecalcitol regulates the gene expressions of articular cartilage markers and differentiation markers in chondrocytes

Vitamin D has been shown to reduce symptoms in patients with osteoarthritis (OA). In a previous study, local administration of eldecalcitol, an active vitamin D3 analog, reduced degenerative changes in articular cartilage in the early phase of experimental OA. However, the target of vitamin D in OA remains unknown. Here, we investigated the effect of eldecalcitol treatment on chondrocytes, which were divided into superficial zone chondrocytes (SZC), deep zone chondrocytes (DZC), and differentiated chondrocytes. SZC and DZC were cultured in monolayer and 3D pellet cultures treated with eldecalcitol. The gene expressions of articular cartilage and chondrocyte differentiation markers were evaluated. Histological analysis of SZC and DZC 3D pellet cultures was performed. The results showed that the articular cartilage markers ETS-related gene (Erg) and lubricin/proteoglycan 4 (PRG4) were significantly increased in SZC, but not in DZC, in the monolayer culture treated with eldecalcitol. The chondrocyte differentiation markers type X collagen and alkaline phosphatase (ALP) were significantly decreased in the DZC pellet culture treated with eldecalcitol. Immunochemical analysis also showed that Erg and lubricin/PRG4 expressions were elevated in the SZC pellet culture treated with eldecalcitol, while type X collagen and ALP expressions were decreased in the DZC pellet culture treated with eldecalcitol. In conclusion, this study showed that eldecalcitol upregulated articular cartilage markers in SZC and suppressed differentiation markers in DZC. Such regulation of chondrocytes by eldecalcitol could be potentially effective against OA progression.