3D Fast Gradient Echo Sequence Research Articles

Multi-echo gradient echo pulse sequences: which is best for PRFS MR thermometry guided hyperthermia?

Purpose MR thermometry (MRT) enables noninvasive temperature monitoring during hyperthermia treatments. MRT is already clinically applied for hyperthermia treatments in the abdomen and extremities, and devices for the head are under development. In order to optimally exploit MRT in all anatomical regions, the best sequence setup and post-processing must be selected, and the accuracy needs to be demonstrated. Methods MRT performance of the traditionally used double-echo gradient-echo sequence (DE-GRE, 2 echoes, 2D) was compared to multi-echo sequences: a 2D fast gradient-echo (ME-FGRE, 11 echoes) and a 3D fast gradient-echo sequence (3D-ME-FGRE, 11 echoes). The different methods were assessed on a 1.5 T MR scanner (GE Healthcare) using a phantom cooling down from 59 °C to 34 °C and unheated brains of 10 volunteers. In-plane motion of volunteers was compensated by rigid body image registration. For the ME sequences, the off-resonance frequency was calculated using a multi-peak fitting tool. To correct for B0 drift, the internal body fat was selected automatically using water/fat density maps. Results The accuracy of the best performing 3D-ME-FGRE sequence was 0.20 °C in phantom (in the clinical temperature range) and 0.75 °C in volunteers, compared to DE-GRE values of 0.37 °C and 1.96 °C, respectively. Conclusion For hyperthermia applications, where accuracy is more important than resolution or scan-time, the 3D-ME-FGRE sequence is deemed the most promising candidate. Beyond its convincing MRT performance, the ME nature enables automatic selection of internal body fat for B0 drift correction, an important feature for clinical application.

Automatic ROI construction for analyzing time-signal intensity curve in dynamic contrast-enhanced MR imaging of the breast.

Our purpose in this study was to construct a 3-dimensional (3D) region of interest (ROI) for analyzing the time-signal intensity curve (TIC) semi-automatically in dynamic contrast-enhanced magnetic resonance (DCE-MR) imaging of the breast. DCE-MR breast imaging datasets were acquired by a 3.0-Tesla MR system with the use of a 3D fast gradient echo sequence. The essential idea in the new method was to analyze each pixel and to construct an ROI made up of pixels with similar TICs. First, an analyst selected a starting point in the contrast media-enhanced tumor. Second, we calculated Pearson's correlation coefficients (CCs) between the TIC in the starting coordinate selected by the analyst and the TIC in the other coordinates. Third, ROI pixels were selected if their CC threshold satisfied a level of coefficient variation of the ROI determined by prior research performed in our institution. We made a retrospective review of patients who underwent breast DCE-MR examination for pre-operative diagnosis. To confirm the feasibility of the resulting 3D-ROI from TIC analysis, we compared Fischer's score obtained from 3D-ROI by applying a new method to a score obtained from a manually selected 2-dimensional (2D) ROI which was used during routine clinical examination. The Fischer's scores obtained from both the automatically selected 3D-ROI and the manually selected 2D-ROI showed almost equivalent results. Thus, we considered that the new method was comparable to the conventional method. Furthermore, the new method has the potential to be used for evaluation of the extent of tumors.

Use of 3T MRI and an unspoiled 3D fast gradient echo sequence for porcine knee cartilage volumetry: Preliminary findings

To assess the utility of knee cartilage volumetry using an unspoiled fat-suppressed 3D fast gradient echo (FGRE) sequence at 3T. Sagittal magnetic resonance (MR) images were obtained with an unspoiled fat-suppressed 3D FGRE sequence in eight porcine knees. Manual segmentation was used to derive the cartilage volume. This volume was compared to a volume measurement of cartilage scraping specimens obtained by water displacement. Imaging was repeated five times in four of the knees to assess interscan volume measurement reproducibility and calculate precision error. A single 3D dataset was manually segmented five times at weekly intervals to assess intraobserver volume measurement reproducibility. Total cartilage volume obtained from MRI and water displacement correlated well (r = 0.75). The interscan reproducibility of total volume measurements, expressed as the coefficient of variation (CV), was 4.2%, and the precision error (root mean square [RMS] CV) was 4.1%. The CV of intraobserver estimates of total cartilage volume by MRI was 3.6%. Interscan reproducibility of quantification of total cartilage volume and reproducibility of the manual segmentation technique were both high (>95%). Accurate and reproducible cartilage volumetry can be obtained by using a clinical unspoiled fat-suppressed 3D FGRE acquired at 3T MRI.

Implementation of vascular‐space‐occupancy MRI at 7T

Vascular-space-occupancy (VASO) MRI exploits the difference between blood and tissue T1 to null blood signal and measure cerebral blood volume changes using the residual tissue signal. VASO imaging is more difficult at higher field because of sensitivity loss due to the convergence of tissue and blood T1 values and increased contamination from blood-oxygenation-level-dependent (BOLD) effects. In addition, compared to 3T, 7T MRI suffers from increased geometrical distortions, e.g., when using echo-planar-imaging, and from increased power deposition, the latter especially problematic for the spin-echo-train sequences commonly used for VASO MRI. Third, non-steady-state blood spin effects become substantial at 7T when only a head coil is available for radiofrequency transmit. In this study, the magnetization-transfer-enhanced-VASO approach was applied to maximize tissue-blood signal difference, which boosted signal-to-noise ratio by 149% ± 13% (n = 7) compared to VASO. Second, a 3D fast gradient-echo sequence with low flip-angle (7°) and short echo-time (1.8 ms) was used to minimize the BOLD effect and to reduce image distortion and power deposition. Finally, a magnetization-reset technique was combined with a motion-sensitized-driven-equilibrium approach to suppress three types of non-steady-state spins. Our initial functional MRI results in normal human brains at 7T with this optimized VASO sequence showed better signal-to-noise ratio than at 3T.

Resolving arterial phase and temporal enhancement characteristics in DCE MRM at high spatial resolution with TWIST acquisition

To investigate the potential of a view-sharing 3D fast gradient-echo sequence using pseudo random trajectories (TWIST) to achieve very short acquisition times with high in-plane resolution and good volume coverage and its application to dynamic contrast-enhanced (DCE) breast magnetic resonance imaging (MRI). Two versions of a 3D fast gradient echo TWIST sequence were implemented and applied to patients: First, an ultrafast TWIST acquisition (TA = 5.7 sec) in combination with a routine DCE MRM protocol to allow the extraction of arterial input functions and to resolve the first pass of the contrast agent. Second, a dynamic full coverage TWIST DCE acquisition (TA = 10.6 sec) in a repeat examination, replacing the routine DCE MRM sequence. The ultrafast acquisition enabled extraction of arterial input functions and the monitoring of the contrast agent's first pass through vessels and lesions. The dynamic full coverage TWIST acquisition captured the initial dynamic slope of the signal time curve of lesions accurately, in contrast to the routine protocol. TWIST acquisitions proved very robust and offer high flexibility in protocol timing. The ultrafast protocol achieved 5.7 seconds time resolution with good image quality and can be combined with any established routine protocol. The full dynamics TWIST DCE protocol offers improved time resolution of the CE dynamic time-course and closely matches the image quality of the routine protocol.

178 テーブル移動型efgre3dの有用性

178 テーブル移動型efgre3dの有用性

3D MR angiography of pulmonary arteries using real-time navigator gating and magnetization preparation.

An ECG-triggered magnetization-prepared segmented 3D fast gradient echo sequence was developed to perform pulmonary arterial MR angiography. A selective inversion recovery pulse was used in the magnetization preparation to suppress venous vasculature. A real-time gating technique based on navigator echoes was implemented to reduce respiration effects. Pencil-beam navigator echoes were acquired immediately before and after the readout train and processed in real-time to dynamically measure the diaphragm position, which was used to control data acquisition with an accept-or-reject-reacquire logic. In a study of 10 volunteers, a gated 3D acquisition with 28 slices required on average approximately 4 min of acquisition time, and six to seven segmental arteries related to the interlobar trunk of the pulmonary artery were depicted. The use of SIR pulse reduced venous signal by 99%. The gated acquisitions were superior to the ungated acquisitions (n = 10, P < 0.005). The real-time navigator gating technique is effective for reduction of respiration effects and thereby makes high resolution 3D MRA of the pulmonary arteries feasible.