3D Stem Cell Culture Research Articles

Revolutionizing pressure ulcer regeneration: Unleashing the potential of extracellular matrix-derived temperature-sensitive injectable antioxidant hydrogel for superior stem cell therapy

Pressure ulcers are a common issue in elderly and medically compromised individuals, posing significant challenges in healthcare. Human umbilical cord mesenchymal stem cells (HUMSCs) offer therapeutic benefits like inflammation modulation and tissue regeneration, yet challenges in cell survival, retention, and implantation rates limit their clinical application. Hydrogels in three-dimensional (3D) stem cell culture mimic the microenvironment, improving cell survival and therapeutic efficacy. A thermosensitive injectable hydrogel (adEHG) combining gallic acid-modified hydroxybutyl chitosan (HBC-GA) with soluble extracellular matrix (adECM) has been developed to address these challenges. The hybrid hydrogel, with favorable physical and chemical properties, shields stem cells from oxidative stress and boosts their therapeutic potential by clearing ROS. The adEHG hydrogel promotes angiogenesis, cell proliferation, and collagen deposition, further enhancing inflammation modulation and wound healing through the sustained release of therapeutic factors and cells. Additionally, the adEHG@HUMSC composite induces macrophage polarization towards an M2 phenotype, which is crucial for wound inflammation inhibition and successful healing. Our research significantly propels the field of stem cell-based therapies for pressure ulcer treatment and underscores the potential of the adEHG hydrogel as a valuable tool in advancing regenerative medicine.

Opportunities and Perspectives for Three Dimensional Culture of Mesenchymal Stem Cell-Derived Exosomes.

Exosomes are nanosized extracellular vesicles (EVs) that participate in intercellular communication through surface proteins and the delivery of internal cargo. The exosomes have gained attention for their potential as disease biomarkers and therapeutic agents. The therapeutic ability of exosomes has been verified by copious previous studies. Effective methods for extensive clinical applications are being researched for exosome-based regenerative therapies, including the application of 3D cultures to enhance exosome production and secretion, which can resolve limited exosome secretion from the parent cells. Cell culture has emerged as a crucial approach for biomedical research because of its many benefits. Both well-established continuous cell lines and primary cell cultures continue to be invaluable for basic research and clinical application. Previous studies have shown that three-dimensional cultured exosomes (3D-Exo) improve therapeutic properties and yields compared with traditional culture systems. Since the majority of studies have focused on exosomes derived from mesenchymal stem cells (MSC-Exo), this review will also concentrate on MSC-Exo. In this review, we will summarize the advantages of 3D-Exo and introduce the 3D culture system and methods of exosome isolation, providing scientific strategies for the diagnosis, treatment, and prognosis of a wide variety of diseases.

Role of Physico-Chemical and Cellular Conditions on the Bone Repair Potential of Plastically Compressed Collagen Hydrogels.

Since their first description nearly 20 years ago, dense collagen hydrogels obtained by plastic compression have become popular scaffolds in tissue engineering. In particular, when seeded with dental pulp stem cells, they have demonstrated a great in vivo potential in cranial bone repair. Here, we investigated how physico-chemical and cell-seeding conditions could influence the formation and in vitro mineralization of these cellularized scaffolds. A qualitative assessment demonstrated that the gel stability before and after compression was highly sensitive to the conditions of fibrillogenesis, especially initial acid acetic and buffer concentrations. Gels with similar rheological properties but different fibrillar structures that exhibited different stabilities when used for the 3D culture of Stem cells from Human Exfoliated Deciduous teeth (SHEDs) could be prepared. Finally, in our optimal physico-chemical conditions, mineralization could be achieved only using human dental pulp stem cells (hDPSCs) at a high cell density. These results highlight the key role of fibrillogenic conditions and cell type/density on the bone repair potential of cell-laden plastically compressed collagen hydrogels.

Injectable cartilage microtissues based on 3D culture using porous gelatin microcarriers for cartilage defect treatment.

Cartilage tissues possess an extremely limited capacity for self-repair, and current clinical surgical approaches for treating articular cartilage defects can only provide short-term relief. Despite significant advances in the field of cartilage tissue engineering, avoiding secondary damage caused by invasive surgical procedures remains a challenge. In this study, injectable cartilage microtissues were developed through 3D culture of rat bone marrow mesenchymal stem cells (BMSCs) within porous gelatin microcarriers (GMs) and induced differentiation. These microtissues were then injected for the purpose of treating cartilage defects in vivo, via a minimally invasive approach. GMs were found to be noncytotoxic and favorable for cell attachment, proliferation and migration evaluated with BMSCs. Moreover, cartilage microtissues with a considerable number of cells and abundant extracellular matrix components were obtained from BMSC-laden GMs after induction differentiation culture for 28 days. Notably, ATDC5 cells were complementally tested to verify that the GMs were conducive to cell attachment, proliferation, migration and chondrogenic differentiation. The microtissues obtained from BMSC-laden GMs were then injected into articular cartilage defect areas in rats and achieved superior performance in alleviating inflammation and repairing cartilage. These findings suggest that the use of injectable cartilage microtissues in this study may hold promise for enhancing the long-term outcomes of cartilage defect treatments while minimizing the risk of secondary damage associated with traditional surgical techniques.

Organoids: opportunities and challenges of cancer therapy.

Organoids are a class of multicellular structures with the capability of self-organizing and the characteristic of original tissues, they are generated from stem cells in 3D culture in vitro. Organoids can mimic the occurrence and progression of original tissues and widely used in disease models in recent years. The ability of tumor organoids to retain characteristic of original tumors make them unique for tumorigenesis and cancer therapy. However, the history of organoid development and the application of organoid technology in cancer therapy are not well understood. In this paper, we reviewed the history of organoids development, the culture methods of tumor organoids establishing and the applications of organoids in cancer research for better understanding the process of tumor development and providing better strategies for cancer therapy. The standardization of organoids cultivation facilitated the large-scale production of tumor organoids. Moreover, it was found that combination of tumor organoids and other cells such as immune cells, fibroblasts and nervous cells would better mimic the microenvironment of tumor progression. This might be important developing directions for tumor organoids in the future.

Label-free imaging of 3D pluripotent stem cell differentiation dynamics on chip

Massive, parallelized 3D stem cell cultures for engineering invitro human cell types require imaging methods with high time and spatial resolution to fully exploit technological advances in cell culture technologies. Here, we introduce a large-scale integrated microfluidic chip platform for automated 3D stem cell differentiation. To fully enable dynamic high-content imaging on the chip platform, we developed a label-free deep learning method called Bright2Nuc to predict in silico nuclear staining in 3D from confocal microscopy bright-field images. Bright2Nuc was trained and applied to hundreds of 3D human induced pluripotent stem cell cultures differentiating toward definitive endoderm on a microfluidic platform. Combined with existing image analysis tools, Bright2Nuc segmented individual nuclei from bright-field images, quantified their morphological properties,predicted stem cell differentiation state, and tracked the cells over time. Our methods are available in an open-source pipeline, enabling researchers to upscale image acquisition and phenotyping of 3D cell culture.

Whitening and moisturizing enhancing effects of three-dimensional human adipose-derived mesenchymal stem cell-conditioned medium-containing cream.

High-functional cosmetic products combined with the concept of "treatment" cosmetics are being introduced to the market. Cosmetic products containing a skin-derived microbiome, a three-dimensional (3D) stem cell culture medium, and low-molecular-weight collagen are being introduced, and these products are leading the cosmeceutical market. We aimed to confirm the potential of a 3D stem cell culture medium-containing cream as a skin-whitening and moisturizing product. To determine the enhancing effects of a cream containing 3D adipose tissue-derived mesenchymal stem cell-conditioned media (3D ADMSC-CM) on whitening and moisturization. The inhibitory activities of tyrosinase (TYR) and melanin were confirmed using 3D ADMSC-CM. Furthermore, hyaluronic acid expression in 3D ADMSC-CM was verified. The clinical efficacy of the cream containing 3D ADMSC-CM was established by evaluating its antioxidant properties and effects on skin tone, radiance, freckles, and moisturization. The use of 3D ADMSC-CM suppressed the inhibitory effects of TYR and melanin by approximately 24% and 33%, respectively, and increased the expression of hyaluronic acid synthase. A significant difference was observed after 4 weeks of using 3D ADMSC-CM in the skin antioxidant evaluation. After 2 and 4 weeks of use, skin tone and radiance increased and skin freckles decreased significantly. Under extremely cold and dry weather conditions, the use of the cream increased skin moisturization. The 3D ADMSC-CM cream evaluated in an environment similar to the human body was found to enhance skin whitening and moisturization and can therefore be used in the skin care and cosmetic industries as a biocosmetic product.

3D culture of mesenchymal stem cells from the yolk sac to generate intestinal organoid

Organoids are in vitro models that originated from the three-dimensional culture of stem cells with the ability to reproduce part of the in vivo structural and functional specificities of body organs. Intestinal organoids have great relevance in cell therapy, as they provide more accurate information about tissue composition and architecture in relation to two-dimensional culture, in addition to serving as a study model for host interaction and drug testing. The yolk sac (YS) is a promising source of mesenchymal stem cells (MSCs), which are multipotent stem cells with self-renewal ability and potential to differentiated into mesenchymal lineages. Besides this, the YS is responsible for the formation of intestinal epithelium during embryonic development. Thus, the aim of this study was to verify if the three-dimensional in vitro culture of stem cells derived from the canine YS is capable of developing intestinal organoids. MSCs from the canine YS and gut cells were isolated and characterized, then three-dimensionally cultured in Matrigel. In both cells lineages, spherical organoids were observed and after 10 days the gut cells formed crypt-like buds and villus-like structures. Despite having the same induction of differentiation process and having the expression of intestinal markers, the MSC from the YS morphology was not in the form of crypt budding. The hypothesis is that these cells could generate structures equivalent to the intestinal organoids of the colon that other studies showed formed only spherical structures. The culture of MSC from the YS, as well as the establishment of protocols for 3D cultivation of this tissue, is relevant, as it will serve as a tool in various applications in basic and scientific biology.

2D and 3D culture of stem cells

Wstęp i cel: Komórki macierzyste są szeroko stosowane w wielu naukach, szczególnie w chorobach. Dzięki swoim właściwościom proliferacyjnym i zdolności do tworzenia się w innych elementach organizmu zastosowanie w mechanizmie regeneracyjnym, przy zachowaniu charakterystycznych parametrów oparzeń, odbudowie układu krwiotwórczego. później je pozyskać z wielu dzieci m.in. składników tłuszczowej, szpiku kostnego, krwi pępowinowej czy mleka kobiecego. 
 Obecny stan wiedzy: Dlatego ważne jest, aby wykorzystać metodę hodowli, dzięki której w krótkim czasie możemy uzyskać wyniki badań, które pozwolą wykonać życie i zróżnicowanie się w innych typach. Do hodowli jest uzyskiwana ilość ilości energii, źródło węgla, składniki odżywcze i powietrze. Najpowszechniej jest metodą 2D, która jest dość tania i skuteczna do wykonania. Metoda 3D, choć droższa i wyższa pracochłonna, jest wyższa wydajna. Metodą 3D, czyli sferyczną, mamy możliwość uzyskania środowiska, które zapewnia warunki in vivo, których nie uzyskujemy metodą 2D. Komórki hodowane sferycznie dobrze bodźce ze środowiska w trzech wymiarach, na poziomie komórka-komórka i komórka-macierz zewnątrzkomórkowa.Wykorzystaj dodatkowy przepływ cytokin, składników odżywczych, czynników wzrostu i chemokin.
 Wnioski: W przyszłości metoda 3D może wyprzeć metody hodowli 2D. Zapewnij warunki zbliżone do tych w wynikach, możemy ocenić wyniki testów analizowanych na zwierzętach. Obecnie w takich kulturach coraz częściej testuje się leki stosowane w onkologii i określa się ich efekt terapeutyczny.

Subaqueous 3D stem cell spheroid levitation culture using anti-gravity bioreactor based on sound wave superposition

BackgroundRecently, various studies have revealed that 3D cell spheroids have several advantages over 2D cells in stem cell culture. However, conventional 3D spheroid culture methods have some disadvantages and limitations such as time required for spheroid formation and complexity of the experimental process. Here, we used acoustic levitation as cell culture platform to overcome the limitation of conventional 3D culture methods.MethodsIn our anti-gravity bioreactor, continuous standing sonic waves created pressure field for 3D culture of human mesenchymal stem cells (hMSCs). hMSCs were trapped and aggerated in pressure field and consequently formed spheroids. The structure, viability, gene and protein expression of spheroids formed in the anti-gravity bioreactor were analyzed by electron microscope, immunostaining, polymerase chain reaction, and western blot. We injected hMSC spheroids fabricated by anti-gravity bioreactor into the mouse hindlimb ischemia model. Limb salvage was quantified to evaluate therapeutic efficacy of hMSC spheroids.ResultsThe acoustic levitation in anti-gravity bioreactor made spheroids faster and more compact compared to the conventional hanging drop method, which resulted in the upregulation of angiogenic paracrine factors of hMSCs, such as vascular endothelial growth factor and angiopoietin 2. Injected hMSCs spheroids cultured in the anti-gravity bioreactor exhibited improved therapeutic efficacy, including the degree of limb salvage, capillary formation, and attenuation of fibrosis and inflammation, for mouse hindlimb ischemia model compared to spheroids formed by the conventional hanging drop method.ConclusionOur stem cell culture system using acoustic levitation will be proposed as a new platform for the future 3D cell culture system.Graphical

Generation of Cerebral Cortical Neurons from Human Pluripotent Stem Cells in 3D Culture.

Human forebrain cortical neurons are essential for fundamental functions like memory and consciousness. Generation of cortical neurons from human pluripotent stem cells provides a great source for creating models specific to cortical neuron diseases and for developing therapeutics. This chapter describes a detailed and robust method for generating human mature cortical neurons from stem cells in 3D suspension culture.

3D organic bioelectronics for electrical monitoring of human adult stem cells.

Three-dimensional in vitro stem cell models have enabled a fundamental understanding of cues that direct stem cell fate. While sophisticated 3D tissues can be generated, technology that can accurately monitor these complex models in a high-throughput and non-invasive manner is not well adapted. Here we show the development of 3D bioelectronic devices based on the electroactive polymer poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)-(PEDOT:PSS) and their use for non-invasive, electrical monitoring of stem cell growth. We show that the electrical, mechanical and wetting properties as well as the pore size/architecture of 3D PEDOT:PSS scaffolds can be fine-tuned simply by changing the processing crosslinker additive. We present a comprehensive characterization of both 2D PEDOT:PSS thin films of controlled thicknesses, and 3D porous PEDOT:PSS structures made by the freeze-drying technique. By slicing the bulky scaffolds we generate homogeneous, porous 250 μm thick PEDOT:PSS slices, constituting biocompatible 3D constructs able to support stem cell cultures. These multifunctional slices are attached on indium-tin oxide substrates (ITO) with the help of an electrically active adhesion layer, enabling 3D bioelectronic devices with a characteristic and reproducible, frequency dependent impedance response. This response changes drastically when human adipose derived stem cells (hADSCs) grow within the porous PEDOT:PSS network as revealed by fluorescence microscopy. The increase of cell population within the PEDOT:PSS porous network impedes the charge flow at the interface between PEDOT:PSS and ITO, enabling the interface resistance (R1) to be used as a figure of merit to monitor the proliferation of stem cells. The non-invasive monitoring of stem cell growth allows for the subsequent differentiation 3D stem cell cultures into neuron like cells, as verified by immunofluorescence and RT-qPCR measurements. The strategy of controlling important properties of 3D PEDOT:PSS structures simply by altering processing parameters can be applied for development of a number of stem cell in vitro models as well as stem cell differentiation pathways. We believe the results presented here will advance 3D bioelectronic technology for both fundamental understanding of in vitro stem cell cultures as well as the development of personalized therapies.

Improving extracellular vesicles production through a Bayesian optimization-based experimental design

With the growing demand and diversity of biological drugs, developing optimal processes for their accelerated production with minimal resource utilization is a pressing challenge. Typically, such optimization involves multiple target properties, such as production yield, biological activity, and product purity. Therefore, strategic experimental design techniques that can characterize the parameter space while simultaneously arriving at the optimal process satisfying multiple target properties are required. To achieve this, we propose the use of a multi-objective batch Bayesian optimization (MOBBO) algorithm and illustrate its successful application for the production of extracellular vesicles (EVs) from a 3D culture of mesenchymal stem cells (MSCs) considering three objectives, namely to maximize the vesicle-to-protein ratio, maximize the enzymatic activity of the MSC-EV protein CD73, and minimize the amount of calregulin impurities. We show that the optimal combination of the process parameters to address the intended objectives could be achieved with only 32 experiments. For the four parameters considered (i.e., microcarrier concentration, seeding density, centrifugation time, and impeller speed), this number of experiments is comparable to or lower than the classical design of experiments (DoE) and the traditional one-factor-at-a-time (OFAT) approach. We illustrate how the algorithm adaptively samples in the process parameter space, selectively excluding unfavorable regions, thus minimizing the number of experiments required to reach optimal conditions. Finally, we compare the obtained solutions to the literature data and present possible applications of the collected data for other modeling activities such as Quality by Design, process monitoring, control, and scale-up.

Xeno-free bioengineered human skeletal muscle tissue using human platelet lysate-based hydrogels

Bioengineered human skeletal muscle tissues have emerged in the last years as new in vitro systems for disease modeling. These bioartificial muscles are classically fabricated by encapsulating human myogenic precursor cells in a hydrogel scaffold that resembles the extracellular matrix. However, most of these hydrogels are derived from xenogenic sources, and the culture media is supplemented with animal serum, which could interfere in drug testing assays. On the contrary, xeno-free biomaterials and culture conditions in tissue engineering offer increased relevance for developing human disease models. In this work, we used human platelet lysate (PL)-based nanocomposite hydrogels (HUgel) as scaffolds for human skeletal muscle tissue engineering. These hydrogels consist of human PL reinforced with aldehyde-cellulose nanocrystals (a-CNC) that allow tunable mechanical, structural, and biochemical properties for the 3D culture of stem cells. Here, we developed hydrogel casting platforms to encapsulate human muscle satellite stem cells in HUgel. The a-CNC content was modulated to enhance matrix remodeling, uniaxial tension, and self-organization of the cells, resulting in the formation of highly aligned, long myotubes expressing sarcomeric proteins. Moreover, the bioengineered human muscles were subjected to electrical stimulation, and the exerted contractile forces were measured in a non-invasive manner. Overall, our results demonstrated that the bioengineered human skeletal muscles could be built in xeno-free cell culture platforms to assess tissue functionality, which is promising for drug development applications.

Size-tunable lipid vectors for controlled local delivery of siRNA from gene activated matrix

Tissue engineering aims to restore or replace different types of biological tissues through the association of cells, biologic factors and biomaterials. Currently, stem cells arise as a major cell source for many therapeutic indications, and their association with 3D scaffolds allow increasing regenerative medicine efficiency. In this context, the use of RNA interference to enhance or control stem cell differentiation into the desired phenotype appears as a promising strategy. However, achieving high transfection efficiency of cells in a 3D structure requires the use of a vector allowing for the spatiotemporally controlled release of the genetic material from these scaffolds. In this study, we report a new siRNA nanovector, called solvent exchange lipoplexe formulation (SELF), which has a tunable size, is stable over time in cell culture conditions and possess a high efficiency to transfect primary human mesenchymal stromal cells (hMSC). We associated SELFs with porous 3D collagen microspheres and demonstrated that the loading capacity and release kinetics were different depending on the size of the associated SELF. Interestingly, these different release profiles resulted in differences in the transfection kinetics of hMSCs. This original and unique type of gene activated matrix, with adaptable release kinetics, could be of interest for long-term and/or sequential transfection profiles of stem cells in 3D culture. Statement of SignificanceThis work combines the use of human mesenchymal stromal cell (hMSC) and gene therapy for tissue engineering. Here, a gene-activated matrix was elaborated with collagen microspheres supporting hMSCs and acting as a reservoir for transfection vectors. This injectable GAM allows for the local and sustained delivery of nucleic acids, hence long-lasting transfection of the supported cells. With the original synthesis protocol presented herein, the size of the nanocarriers can be easily adapted, resulting in different siRNA release profiles from the microspheres. Most interestingly, different siRNA release profiles gave rise to different cell transfection profiles as assessed by the downregulation of a target gene. This highlights the versatility of the system and its suitability for various pathophysiological needs in regenerative medicine.

Single ion channel recording in 3D culture of stem cells using patch-clamp technique

Tri-dimensional (3D) cell aggregates or spheroids are considered to be closer to physiological conditions than traditional 2D cell culture. Mesenchymal stem cells (MSCs) assembling in spheroids have increased the survival of transplanted cells. The organization of stem cells in 3D culture affects cell microenvironment and their mechanical properties. The regulation of the biological processes that maintain crucial physiological reactions of MSCs is closely related to the functioning of ion channels. The pattern of expression, role and regulatory mechanisms of ion channels could be significantly different in 3D compared to 2D culture, and, thus, needed to be properly analyzed on the level of ionic currents. Electrophysiological data on the features of ion channels functioning in 3D cell culture models are currently very limited in the literature. This gap of knowledge may be associated with technical difficulties that exist when researchers try to apply the standard patch clamp method for the registration of ion channels in cells aggregated in spheroids. In this regard, our study focuses on solving emerging technical difficulties and presents an example of their successful solution. Here, we developed a specific approach and have recorded the activity of mechanosensitive stretch-activated ion channels (SACs) in endometrial MSCs (eMSCs) assembled in spheroids. Moreover, we observed functional interplay of SACs with potassium channels of big conductance (BK) in the plasma membrane of eMSC spheroids consistently to revealed earlier in routine 2D cultured cells. Additionally, we observed a significant decrease in the frequency of SACs activation in spheroids that may indicate the differences in the level of functional expression of channels in 3D culture comparing to 2D culture of eMSCs.

Biocompatibility-on-a-chip: Characterization and evaluation of decellularized tendon extracellular matrix (tdECM) hydrogel for 3D stem cell culture in a microfluidic device

Researchers have always tried expensive in vitro tests to show the 3D usability of dECM. The use of tissue-specific hydrogels in a microfluidic device is rarely studied. In this study, we have used ECM obtained from goat digital flexor tendons by decellularization technique. The tdECM was characterized for its structural properties using Scanning Electron Microscopy (SEM). Collagen, dsDNA, GAGs, and protein contents were quantified using spectrophotometric assays. The cell viability and proliferation of human umbilical cord-derived mesenchymal stem cells (hUMSCs) encapsulated in the tdECM hydrogel inside the microfluidic device were checked using Calcein-AM/PI. The FTIR data showed prominent peaks of the amide group, indicating the presence of collagen. The SEM data showed intact fiber morphology after the decellularization process. There was a 95 % reduction in double-stranded DNA (dsDNA) content, proving the effectiveness of the decellularization technique. There was no significant difference in the collagen content of tdECM and the GAGs were also in the acceptable range compared to the native tissue. Over 90 % cell viability in hUMSCs was observed qualitatively and quantitatively in vitro and inside a microfluidic device. In conclusion, we characterized the tdECM hydrogel and demonstrated its compatibility with the microfluidic device.

Dextran sulfate prevents excess aggregation of human pluripotent stem cells in 3D culture by inhibiting ICAM1 expression coupled with down-regulating E-cadherin through activating the Wnt signaling pathway

BackgroundHuman pluripotent stem cells (hPSCs) have great potential in applications for regenerative medicine and drug development. However, 3D suspension culture systems for clinical-grade hPSC large-scale production have been a major challenge. Accumulating evidence has demonstrated that the addition of dextran sulfate (DS) could prevent excessive adhesion of hPSCs from forming larger aggregates in 3D suspension culture. However, the signaling and molecular mechanisms underlying this phenomenon remain elusive.MethodsBy using a cell aggregate culture assay and separating big and small aggregates in suspension culture systems, the potential mechanism and downstream target genes of DS were investigated by mRNA sequence analysis, qRT-PCR validation, colony formation assay, and interference assay.ResultsSince cellular adhesion molecules (CAMs) play important roles in hPSC adhesion and aggregation, we assumed that DS might prevent excess adhesion through affecting the expression of CAMs in hPSCs. As expected, after DS treatment, we found that the expression of CAMs was significantly down-regulated, especially E-cadherin (E-cad) and intercellular adhesion molecule 1 (ICAM1), two highly expressed CAMs in hPSCs. The role of E-cad in the adhesion of hPSCs has been widely investigated, but the function of ICAM1 in hPSCs is hardly understood. In the present study, we demonstrated that ICAM1 exhibited the capacity to promote the adhesion in hPSCs, and this adhesion was suppressed by the treatment with DS. Furthermore, transcriptomic analysis of RNA-seq revealed that DS treatment up-regulated genes related to Wnt signaling resulting in the activation of Wnt signaling in which SLUG, TWIST, and MMP3/7 were highly expressed, and further inhibited the expression of E-cad.ConclusionOur results demonstrated that DS played an important role in controlling the size of hPSC aggregates in 3D suspension culture by inhibiting the expression of ICAM1 coupled with the down-regulation of E-cad through the activation of the Wnt signaling pathway. These results represent a significant step toward developing the expansion of hPSCs under 3D suspension condition in large-scale cultures.

Therapeutic strategies of three-dimensional stem cell spheroids and organoids for tissue repair and regeneration.

Three-dimensional (3D) stem cell culture systems have attracted considerable attention as a way to better mimic the complex interactions between individual cells and the extracellular matrix (ECM) that occur in vivo. Moreover, 3D cell culture systems have unique properties that help guide specific functions, growth, and processes of stem cells (e.g., embryogenesis, morphogenesis, and organogenesis). Thus, 3D stem cell culture systems that mimic in vivo environments enable basic research about various tissues and organs. In this review, we focus on the advanced therapeutic applications of stem cell-based 3D culture systems generated using different engineering techniques. Specifically, we summarize the historical advancements of 3D cell culture systems and discuss the therapeutic applications of stem cell-based spheroids and organoids, including engineering techniques for tissue repair and regeneration.

Designing highly customizable human based platforms for cell culture using proteins from the amniotic membrane

In the past few years researchers have witnessed a paradigm shift in the development of biomaterials for drug discovery, tissue engineering, and regenerative medicine. After the great advances resulting from the transition of the 2D to the 3D, the new focus has been to increase the clinical relevance of such systems, as well as avoid the use of animals, by developing platforms that better replicate the human physiology in vitro. In this sense, we envisage the use of human matrices extracted from ethically sourced and readily available tissues as an optimal and promising alternative to currently used approaches. Hereupon, we report for the first time the chemical modification of human ECM proteins from the amniotic membrane (AM) with photoresponsive groups to produce bioinks and hydrogel precursors to engineer customizable platforms that are representative of native tissues and capable of supporting long-term cell culture. Our results demonstrated an efficient decellularization, liquefaction and functionalization of AM-derived ECM with methacryloyl domains (AMMA), with production of stable and versatile hydrogels. Mechanical characterization evidenced an increased compression strength as a function of methacrylation degree and decellularized ECM concentration. Three-dimensional (3D) stem cell culture in the AMMA hydrogels resulted in viable and proliferative cells up to 7 days; moreover, the mouldable character of the hydrogel precursors permits the processing of patterned hydrogel constructs allowing the control over cellular alignment and elongation, or microgels with highly tunable shape.