1D Coordination Polymer Research Articles

Decrypting Synergy of Alloy & Metal Nanoparticles Within Nitrogen-Doped Carbon Nanosheets for Zn-Air Batteries with Ultralong Cycling Stability.

The exploration of efficient, robust, and low-cost bifunctional electrocatalysts to drive the commercial application of Zn-air batteries (ZABs) is of great significance but still remains a challenge. Herein, a 1D coordination polymer (1D-CP) derived FeNi alloy & Co nanoparticles (NPs) co-implanted N-doped carbon nanosheets (FNC/NCS) is judiciously crafted and employed as a high-performance electrocatalyst for ultralong lifetime ZABs. The key to this strategy is the leveraging of metal-coordinated melamine to direct the pyrolysis of 1D-CP, enabling the in situ formation of well-dispersed FeNi alloy and Co NPs within the carbon matrix. The resulting FNC/NCS exhibits prominent oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) activity with a small overall oxygen potential difference (ΔE = 0.68V). Density functional theory (DFT) simulation demonstrates that the synergistic effect between FeNi alloy and Co NPs can reduce energy barriers, promote electron transfer, and optimize the formation of crucial intermediates, thereby largely boost ORR/OER activity of FNC/NCS. The FNC/NCS-assembled ZABs possess high specific capacity, large power density, and ultralong cycling life in both aqueous (> 3300h) and solid-state (150h) electrolytes. This work provides a viable strategy for 1D-CP-derived bifunctional electrocatalysts and dissects the synergistic effect between different metal species, affording significant guidance for the development of renewable energy materials.

Cd(II)-based fish-bone-like 1D coordination polymer: structural elucidation and computational study

{[Cd(L)2(PBT)2]}n (1) [H2L = 5-nitro-isophthalic acid; PBT = 2-pyridin-4-ylbenzothiazole], 1D Coordination Polymer (1D-CP), is characterized by single crystal X-ray diffraction. The structure of 1 contains carboxylate bridges of L2- to Cd(II), where one carboxylate chelates to Cd(II) and the other -COO bridges to two neighboring Cd(II) centers that then form eight-membered dinuclear metallacycles (Cd2C2O4). The 1D chains self-assemble via H-bonding and π⋅⋅⋅π interactions to form a supramolecular aggregate that resembles a fish-bone pattern. These interactions are further explored by Hirshfeld Surface Analysis. Density Functional Theory (DFT) computations using the crystallographic parameters of 1 predicted an energy gap, ΔE (EHOMO – ELUMO) of 3.67 eV, which is comparable to the experimental band gap obtained from a Tauc’s plot, 3.73 eV. The band gap value demonstrates the semiconducting character and may be used for device fabrication. Furthermore, molecular electrostatic potential (MEP) shows strong electrophilic reaction potential and predicts reactive sites. The PBT ligand is emissive (370 nm) while H2L is non-emissive. DMF suspensions of 1 emit at 525 nm with a long lifetime, 0.715 ns compared to the lifetime of PBT (0.05 ns). This supports that extended conjugation occurs upon formation of the 1D-CP, altering the photophysics.

Synthesis, structure, and AP catalytic performance of two new 1D coordination polymers

Two 1D chain coordination polymers (CPs), [Co(DNDPA)(DMF)2] 1 and [Mn(DNDPA)(DMF)2] 2, were successfully synthesized (4,4′-dinitrodiphenic acid, DNDPA). Their structures were confirmed by single-crystal X-ray diffraction. Differential scanning calorimetry coupled with thermogravimetric analysis revealed that both CPs exhibit commendable thermal stability, with CP 1 and 2 decomposing at 368.9 °C and 375.5 °C, respectively. Non-isothermal kinetic studies confirmed that both CPs displayed significant catalytic activity for the decomposition of ammonium perchlorate (AP). In particular, CP 1 and 2 reduced the activation energy of AP from its intrinsic value to 100.5 kJ/mol and 127.45 kJ/mol, respectively, and its high-temperature decomposition peak to 354.3 °C and 327.7 °C, respectively. These findings underscore the potential of these CPs as effective catalysts for enhancing the combustion properties of AP.

Crystallization of 2D TiO2 Nanosheets via Oriented Attachment of 1D Coordination Polymer.

Demystifying the molecular mechanism of growth is vital for the rational design, synthesis, and optimization of functional nanomaterials. Despite the promising perspectives and extensive efforts, the growth mechanism of atomically thin TiO2(B) nanosheets remains unclear, hence it is difficult to tune their band and surface structures. Herein, we report an oriented attachment-based crystallization mechanism of TiO2(B) nanosheets from a 1D titanium glycolate coordination polymer through hydrolysis and condensation. With time-tracking experiments, this 1D coordination polymer is found to be an intermediate in the synthesis of TiO2(B) nanosheets by using Ti alkoxides and chlorides as precursors, suggesting the universality of the 1D-to-2D growth mechanism. Such a side-to-side attachment pathway bridges the classical and nonclassical interpretations of crystallization, and meanwhile hints at the possibility of other 1D complexes as potential precursors for 2D materials.

Unveiling Heterogeneous Catalytic Potential of Distinctly Coordinated Polymers Toward Henry and Morita‐Baylis‐Hillman Reactions

AbstractThree 1D coordination polymers (CPs), {[CuL2(H2O)] ⋅ (H2O)3}n (1) {[CoL2(H2O)2] ⋅ (H2O)}n (2) and {[NiL2(H2O)] ⋅ (H2O)3}n (3), (L1=N‐nicotinoylglycinato) have been synthesized by adopting a solvothermal reaction strategy and characterized through several spectral techniques i. e., elemental analyses, FT‐IR, TGA, EDX, DSC, AAS, and PXRD. X‐ray single crystal analysis revealed the 5‐, 6‐ and 7‐coordinated structures respectively for CPs 1, 2 and 3 wherein, L1 connects the metal ions in a bridging mode. The CPs entail H‐bonding, π–π stacking along with other non‐covalent interactions and expand into 3D supramolecular networks. Further, FESEM and HRTEM provided morphological insight for 1–3 and aid in obtaining interplanar spacings. CPs 1–3 possessing distinct coordination numbers and good thermal stability have been subjected to catalysis after optimization and notably, these serve as efficient, easy to work up, and reusable porous heterogeneous catalysts for Henry and Morita‐Baylis‐Hillman (MBH) reactions with reasonably good yields (97–93 %). Remarkably, catalyzed by 1–3 can be reused at least seven times for the Henry reaction and six times for the MBH reaction, retaining their catalytic efficiency. Relative catalytic efficacy toward the Henry and MBH reactions follows the order 1>2>3. Present findings are based on a rational approach of varying coordination number (5, 6 and 7) and metal ions [Cu(II), Co(II) and Ni(II)] respectively in 1–3 having structural evidence and examine their catalytic performances for typical Henry and MBH reactions.

Coordination polymer derived transition metal phosphide/carbon composites for bifunctional oxygen electrocatalyst

Developing nonprecious electrocatalysts with bifunctional performances for oxygen reduction (ORR) and evolution reactions (OER) remains a crucial challenge in rechargeable Zn-air batteries (RZABs). In this study, we report the synthesis of a three-dimensional (3D) porous N, P-doped carbon-wrapped cobalt phosphide composite (Co2P@3DNPC) via direct calcination of a novel organic/inorganic porous coordination polymer by an in-situ phosphating strategy. DFT calculations demonstrate the intricate interactions occurring during the PEI-directed grinding self-assembly process among Co2+, phytic acid (PA), and polyethylenimine (PEI). Specifically, Co2+ ions initially adsorb onto PEI molecules before integrating with PA to form a 3D coordination polymer matrix. As-fabricated Co2P@3DNPC composite exhibits impressive ORR/OER bifunctional performances, with a half-wave potential of 0.78 V and an overpotential of 1.71 V, respectively. Its bifunctional activities enable a power density of 148.5 mW cm–2 in rechargeable ZABs, with remarkable stability (> 480 h) during a discharge-charge cycle. The interconnected porous structure and embedded Co2P nanoparticles optimize the electrode-electrolyte interfacial contact, boosting energy density and cycle life of as-assembled ZABs. This innovative approach paves the way for efficient, cost-effective production of bifunctional electrocatalysts for RZABs.

Structural and synthesis study of eight isostructural coordination polymers formed by 5-sulfoisophthalic acid and lanthanide ions

This work presents the synthesis and structural characterization of eight isostructural 1D coordination polymers formed by the coordination of 5-sulfoisophthalic acid with various lanthanides ions: Ln = CeIII,PrIII,SmIII,GdIII,DyIII,HoIII,Er(III)andTm(III). The structures were synthetized via a two-step process, wherein a solution of lanthanide ions was added to a mixture of 5-sulfoisophthalic acid and 1,3-bis(4-pyridyl)propane, the latter serving as an auxiliary ligand. This method has proven to be a simpler approach compared to those described in the literature. The compounds were characterized by X-ray single crystal diffraction, FT-IR and Raman spectroscopy, and elemental analysis. Structural analysis revealed a significant correlation between atomic number of the lanthanide ion, unit cell parameters, and space group. On the other hand, the Hirshfeld surface analysis and the two-dimensional fingerprint plot revealed that the set of the intermolecular forces remains unchanged across different lanthanide ion.

Isostructural Oxamate Complexes with Visible Luminescence (Eu3+) and Field-Induced Single-Molecule Magnet (Nd3+).

The search for new metal-organic compounds as candidates for quantum information processing technologies is in the spotlight. Several metal ions and organic linkers have been used to obtain such compounds. Herein, we describe the synthesis, crystal structures, and cryomagnetic properties of two air-stable isostructural neodymium(III) and europium(III) one-dimensional (1D) coordination polymers of formula [Nd(Hmpa)3(DMSO)2]n (1) and [Eu(Hmpa)3(DMSO)2]n (2) [Hmpa = N-(4-methylphenyl)oxamate, and DMSO = dimethylsulfoxide]. These complexes were prepared by reacting n-Bu4N(Hmpa) proligand [n-Bu4N+ = tetra-n-butylammonium] and the correspondent LnCl3·6H2O salt (Ln = Nd or Eu) in the open air and mild conditions. The crystal structures of 1 and 2 reveal the Ln3+ ion surrounded by two DMSO molecules and three oxamate ligands, one of them connecting to adjacent mononuclear entities through carboxylate bridges featuring a 1D coordination polymer, while the other two establishing double N-H···O hydrogen bonds among adjacent polymers to give a resultant supramolecular 2D network. Cryomagnetic measurements in the static (dc) and dynamic current (ac) regimes reveal that 1 behaves as a field-induced single-molecule magnet below 8.8 K. A photoluminescence study shows that Hmpa ligands efficiently sensitize the luminescence of Eu3+ complex in the visible region in the solid state at room temperature.

Discrete versus polymeric structures of coordination compounds of copper(II) with (pyridin-2-yl)methylenenicotinohydrazide and a library of dicarboxylic acids

A series of copper(II) discrete and polymeric coordination compounds, namely [{CuL(H2O)}2(fum)] (1), [{CuL(H2O)}2(mes)] (2), [Cu2L2(glu)]n·2n(H2O) (3·2n(H2O)) and [Cu3L2(adi)2]n (4) were fabricated from (pyridin-2-yl)methylenenicotinohydrazide (HL) and a library of dicarboxylic acids, namely fumaric acid (H2fum), mesaconic acid (H2mes), glutaric acid (H2glu) and adipic acid (H2adi), using evaporative crystallization, grinding and slurry synthesis methods. The obtained coordination compounds have been fully characterized by single crystal X-ray diffraction revealing different types of complexes depending on the linker length, viz. from dinuclear complexes for the shorter linkers (fumaric and mesaconic acids) to 1D and 2D coordination polymers for longer glutaric and adipic acids. Thermal stability and spectroscopic features (FTIR and diffuse reflectance) of complexes were also studied. For the nonpolymeric compounds 1 and 2, the supramolecular assemblies driven by a combination of antiparallel π-stacking and hydrogen bonding interactions have been studied and compared using DFT calculations, MEP surface analysis and a combination of QTAIM and NCIplot computational tools.

Spin Crossover Quenching by "Racemization" in a Family of trans-1,2-Di(tetrazol-1-yl)cyclopentane-Based Fe(II) 1D Coordination Polymers.

Optically pure (RR)- and racemic (RR/SS)-trans-1,2-di(tetrazol-1-yl)cyclopentane were synthesized and used to prepare homo- and heterochiral Fe(II) coordination compounds. [Fe((RR/SS)-C7H10N8)2(CH3CN)2](BF4)2 (1A), [Fe((RR/SS)-C7H10N8)2(C2H5CN)2](BF4)2 (2A), [Fe((RR)-C7H10N8)2(CH3CN)2](BF4)2·2CH3CN (1B·solv), and [Fe((RR)-C7H10N8)2(C2H5CN)2](BF4)2 (2B) form a family of one-dimensional coordination polymers. Fe(II) cations in these complexes are characterized by a heteroleptic coordination environment: the neighboring metal centers are bridged by two 1,2-di(tetrazol-1-yl)cyclopentane molecules, while the nitrile molecules (acetonitrile or propionitrile, respectively) occupy the axial positions. Independently of the kind of nitrile coligands, an ability to thermally induce spin crossover (SCO) is governed by chirality. 1B·solv and 2B exhibit abrupt and complete SCO occurring at T1/2 = 144 K and T1/2 = 228 K, respectively. Desolvated form, 1B (of the same stoichiometry as 2B), also exhibits SCO (T1/2 = 215 K). In contrast, an exchange within the polymeric chain of half of the RR molecules with the SS enantiomeric form results in formation of 1A and 2A, which remain in stable high-spin (HS) form down to 10 K. It has been shown that moving from a homochiral to a heterochiral system changes the structure of the polymeric unit (while maintaining the same polymer dimensionality and bridging fashion) that leads to the deep reorganization of the further coordination spheres, including the anion network.

Entropically driven melting of Cu-based 1D coordination polymers.

We investigated the melting behavior of four CPs with one-dimensional structures from a thermodynamic point-of-view. The difference in melting points depending on the crystal structures is observed. The interactions within the crystals were analyzed using DFT calculations. These analyses suggest that entropic terms dominate the melting points.

A new three-dimensional barium(II) coordination polymer constructed from N,N'-bis(glycinyl)pyromellitic diimide: microwave-assisted synthesis, structure, Hirshfeld surface analysis and properties.

A new three-dimensional (3D) coordination polymer, namely, poly[diaqua[μ5-2,2'-(1,3,5,7-tetraoxo-1,2,3,5,6,7-hexahydropyrrolo[3,4-f]isoindole-2,6-diyl)diacetato]barium(II)], [Ba(C14H6N2O8)(H2O)2]n, (I), has been synthesized by the microwave-irradiated reaction of Ba(NO3)2 with N,N'-bis(glycinyl)pyromellitic diimide {BGPD, namely, 2,2'-(1,3,5,7-tetraoxo-1,2,3,5,6,7-hexahydropyrrolo[3,4-f]isoindole-2,6-diyl)diacetatic acid, H2L}. The title compound was structurally characterized by single-crystal X-ray diffraction analysis and powder X-ray diffraction analysis, as well as IR spectroscopy. In the crystal structure of (I), the BaII ion is nine-coordinated by six carboxylate O atoms from five symmetry-related L2- dianions and one imide O atom, as well as two water O atoms. The coordination geometry of the central BaII ion can be described as a spherical capped square antiprism. One carboxylate group of the ligand serves as a μ3-bridge linking the BaII cations into a one-dimensional polynuclear secondary building unit (SBU). Another carboxylate group of the ligand acts as a μ2-bridge connecting the 1D SBUs, thereby forming a two-dimensional (2D) SBU. The resulting 2D SBUs are extended into a 3D framework via the pyromellitic diimide moiety of the ligand as a spacer. The 3D Ba framework can be simplified as a 5-connected hexagonal boron nitride net (bnn) topology. The intermolecular interactions in the 3D framework were further investigated by Hirshfeld surface analysis and the results show that the prominent interactions are H...O (45.1%), Ba...O (11.1%) and C...H (11.1%), as well as H...H (11.1%) contacts. The thermal stability, photoluminescence properties and UV-Vis absorption spectra of (I) were also investigated. The coordination polymer exhibits a fluorescence emission with a quantum yield of 0.071 and high thermal stability.

2D coordination polymers of cadmium(II) and zinc(II) derived from N,N'-bis(glycinyl)pyromellitic diimide: microwave-assisted synthesis, structures, spectroscopic properties and influence of metal-ion size.

Two new two-dimensional (2D) coordination polymers (CPs), namely, poly[diaqua[μ4-2,2'-(1,3,5,7-tetraoxo-1,2,3,5,6,7-hexahydropyrrolo[3,4-f]isoindole-2,6-diyl)diacetato-κ4O:O':O'':O''']cadmium(II)], [Cd(C14H6N2O8)(H2O)2]n (1), and poly[[tetraaqua[μ4-2,2'-(1,3,5,7-tetraoxo-1,2,3,5,6,7-hexahydropyrrolo[3,4-f]isoindole-2,6-diyl)diacetato-κ4O:O':O'':O'''][μ2-2,2'-(1,3,5,7-tetraoxo-1,2,3,5,6,7-hexahydropyrrolo[3,4-f]isoindole-2,6-diyl)diacetato-κ2O:O']dizinc(II)] dihydrate], {[Zn(C14H6N2O8(H2O)2]·H2O}n (2), have been synthesized by the microwave-irradiated reaction of Cd(CH3COO)2·2H2O and Zn(CH3COO)2·2H2O, respectively, with N,N'-bis(glycinyl)pyromellitic diimide {BGPD, namely, 2,2'-(1,3,5,7-tetraoxo-1,2,3,5,6,7-hexahydropyrrolo[3,4-f]isoindole-2,6-diyl)diacetic acid, H2L}. In the crystal structure of 1, the CdII ion is six-coordinated by four carboxylate O atoms from four symmetry-related L2- dianions and two coordinated water molecules, furnishing an octahedral coordination geometry. The bridging L2- dianion links four symmetry-related CdII cations into a 2D layer-like structure with a 3,4-connected bex topology. In the crystal structure of 2, the ZnII ion is five-coordinated by three carboxylate O atoms from three different L2- dianions and two coordination water molecules, furnishing a trigonal bipyramidal coordination geometry. Two crystallographically independent ligands serve as μ4- and μ2-bridges, respectively, to connect the ZnII ions, thereby forming a 2D layer with a 3,3-connected hcb topology. Crystal structure analysis reveals the presence of n→π* interactions between two carbonyl groups of the pyromellitic diimide moieties in 1 and 2. CP 1 exhibits an enhanced fluorescence emission compared with free H2L. The framework of 2 decomposes from 720 K, indicating its high thermal stability. A comparative analysis of a series of structures based on the BGPD ligand indicates that the metal-ion size has a great influence on the connection modes of the metal ions due to different steric effects, which, in turn, affects the structures of the SBUs (secondary building units) and frameworks.

3D coordination polymers with N-heterocyclic Ga(I) moieties

The reactions of bimetallic acenaphthene-1,2-diimine complex [(Dpp-bian-GaCr(CO)5]2- [Na(Thf)2]2(I) (Dpp-bian = 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene) with 4,4ʹ-bipyridine (4,4ʹ-Bipy) and 1,3-bis(4-pyridyl)propane (Bpp) in THF gave 3D coordination polymers [{(Dppbian) GaCr(CO)5}{Na(4,4ʹ-Bipy)3}]n(II) and [(Dpp-bian)GaCr(CO)4Na(Et2O)(Bpp)1,5]n(III), respectively. Compounds II and III were characterized by elemental analysis and NMR and IR spectroscopy. The molecular structure of IIwas established by X-ray diffraction (CCDC no. 2278024).

Zn(II)-based 2D coordination polymer bridged by isophthalate and Dipyridylsulphide : Structural characterisation, Schottky diode device and theoretical interpretation

The design of low cost, easy-to-prepare, soft-to-handle and sustainable material-based technology has been growing day-by-day. Coordination polymers (CPs) are such emerging materials those have been instructed as one of the premium resources to serve the electronic industry. In this aspect, we have designed a hetero-bridging Zn(II)-coordination polymer using two different bridging ligands - 4,4′-Dipyridylsulphide (4,4′-DPS) and 5-Nitroisophthalic acid (5-H2NIA), {[Zn(4,4′-DPS)2(5-HNIA)2(H2O)]n} (Zn-CP) and characterize the crystalline compound with Single Crystal X-ray diffraction (SCXRD) technique. The structure demonstrates that Zn-CP consists of two-dimensional (2D) network with distorted trigonal bipyramidal Zn(II) center (ZnN2O3). The self-assembly of 2D network by different non-covalent interactions forms three-dimensional (3D) supramolecular architecture. Hirshfeld surface analysis effectively evaluates the possibilities of non-covalent interactions present in Zn-CP. Density functional theory (DFT) based numerical calculation using crystallographic parameters has estimated the band gap 3.51 eV which implies the semiconducting nature of Zn-CP. This property has been endorsed by the determination of band gap from Tauc's plot (3.71 eV) using UV–Visible absorption data. The electrical conductivity of Zn-CP determined at room temperature is 8.54 x 10–7 S m-1. The DC activation energy of the device is 9.05 × 10–19 eV with the conductivity limit, 4.71 (Ω-m)-1 having Richardson constant, 7.07 × 10–10Am−2K−2and barrier height is 0.87 eV which suggests that the Zn-CP is n-type semiconductor. Thus, the present work may provide a facile pathway for laboratory-to-land application of such energy materials taking into consideration of technological aspect in the highly energy demanding era. Hence, the synthesized Zn-CP may have energy material application in the semiconducting industry.

Magnetic studies and Hirshfeld surface analysis of acetato bridged 2D Mn(II) coordination polymer with 4-aminobenzohydrazide ligand

A new acetato bridged 2D coordination polymer with general formula of [Mn(µ-4-ambh)(µ-OAc)(OAc)]n (1) was prepared by the reaction of Mn(OAc)2·4H2O with 4-aminobenzohydrazide (4-ambh) in equimolar ratio. The reaction was done in methanol under reflux condition and the single crystals of 1 were obtained by evaporation of the solvent. The structure of this compound was determined by X-ray analysis, and its spectroscopic properties and thermal stability were also studied. These studies indicated that in this compound, the manganese ions are connected by a mixture of acetate and 4-ambh bridges to form a 2D polymeric network at the bc crystallographic plane. The intermolecular and intramolecular interactions were investigated by Hirshfeld surface analysis. Magnetic studies revealed a dominant antiferromagnetic intermetallic coupling of J = −0.78 cm−1 magnitude. Magnetization measurements suggest a diamagnetic ground state and a small gap of 1.59 cm−1 with the first excited state; while the axial zero-field splitting parameter, D, was calculated at −0.21 cm−1.

Hexagonal-prismatic metal‒organic cages and metal‒organic polymers based on 1,1'-(5-methyl-1,3-phenylene)bis(1H-imidazole) ligand: Synthesis, structural characterization and magnetic property

A serial of hexagonal-prismatic metal organic cages (MOCs), [Co6(OH)2(HCOO)6(pbim)6(H2O)6]·SO4·2HCOO·8H2O (1·2HCOO·8H2O), [Ni6(OH)2(HCOO)6(pbim)6(H2O)6]·SO4·2HCOO·8H2O (2·HCOO·8H2O), {[Co6(μ3-OH)2(μ-HCOO)6(pbim)6(H2O)6]·ClO4}3+·3HCOO·solvent (3·3HCOO·solvent) and {[Ni6(μ3-OH)2(μ-HCOO)6(pbim)6(H2O)6]·ClO4}3+·3HCOO·solvent (4·3HCOO·solvent), was constructed from shuttlecock-like C3-symmetric [M3(μ3-OH) (μ-HCOO)3(H2O)3] (M = Co2+ or Ni2+) clusters generated in situ and a clip-like ligand 1,1'-(5-methyl-1,3-phenylene)bis(1H-imidazole) [pbim]. Interestingly, one SO42− or ClO4− anion was encapsulated in each cage of MOCs 1–4 through cooperative O–H⋯O and C–H⋯O hydrogen-bonding interactions. It was also found that those SO42‒-/ClO4−-encapsulated MOCs, especially SO42‒-encapsulated MOC of Ni2+, displayed quite stability in methanol. Notably, when the crystal parent solution of MOC 1 was disturbed or MOC 1 was immersed in its parent solution for a long time, it resulted in the formation of a 2D coordination polymer [Co(pbim)2(H2O)2]·2HCOO (5) with helical architecture. Unexpectedly, a novel 2D coordination polymer [Ni4(pbim)2(CH3O)4(C6H5COO)4]·2H2O (6·2H2O) based on in-situ produced cubane-like [Ni4(μ3-CH3O)4(μ-COO)2] cluster was solvothermally synthesized through the reaction of benzoic acid with relatively stable MOC 2 in DMF. Magnetic studies show that there are antiferromagnetic coupling exchanged by mixed hydroxyl/carboxylate bridges in shuttlecock-like [M3(μ3-OH) (μ-HCOO)3(H2O)3] clusters of 1 and 2 or in cubane-like [Ni4(μ3-CH3O)4(μ-COO)2] cluster of 6. The best fits for their magnetic behaviours gave the following coupling constants: J = −2.05 cm−1 for 1, J = −1.74 cm−1 for 2, and J1 = −2.85 cm−1 and J2 = −4.01 cm−1 for 6.

Dimers and 2D Networks of Adamantane-Related Ternary Organosilicon Coinage Metal Sulfide Clusters.

Adamantane-type organotin sulfide clusters were recently shown to react with coinage metal phosphine complexes under replacement of an organic substituent by a metal-phosphine unit. An extension of such studies involving the silicon-based congener [(PhSi)4S6] (A) revealed that the cluster core will be partly disassembled and a {PhSi} moiety is replaced by a coinage metal phosphine complex to form [(Et3PAg)3(PhSi)3S6] (B) and [Na2(thf)2.33][(Me3PCu)(PhSi)3S6] (C). Herein, we present an extension of this work upon variation of the reactants and reaction conditions. Besides the isolation of crystalline precursor complexes [CuCl(PMe2Ph)3] (1) and [AgCl(PMe2Ph)2]2 (2), the study addresses reactions of A with AgCl and a phosphine ligand in CH2Cl2, upon which A is completely disassembled to form [(Ph3P)3Ag(μ-S)SiCl2Ph] (3). In another case a CH2 group, most likely stemming from CH2Cl2, was attached to the ligand, thus generating [{PhCl(S)SiSCH2P(Ph2)CH2CH2}2] (4). Upon using CuCl and 1,4-bis(diphenylphosphino)butane (dppb) we isolated the phosphine-bridged analog of B, [{(dppbCu2)CuP(Ph2)(CH2CH2)(PhSi)3S6}2] (5). In order to receive the yet elusive silver homolog of C, we used PMe2Ph as a bulkier ligand. This way we generated a 2D coordination polymer of the desired composition, [Na2(thf)1.5][(Me2PhPAg)(PhSi)3S6] (6). UV-visible spectra of 6 indicated a bandgap of 3.89 eV, thus blue-shifted in regards to B and C.

2D Coordination Polymers of Zn(II) with Diethylmalonic Acid Dianions and 4,4´-bipyridine: Synthesis and Structures

2D Coordination Polymers of Zn(II) with Diethylmalonic Acid Dianions and 4,4´-bipyridine: Synthesis and Structures

(Invited) Electrochemical Random Access Memory for Neuromorphic Computing

Electrochemical random access memory (ECRAM) is a three terminal device that functions by tuning electronic conductance in functional materials through solid-state electrochemical redox reactions, and is one of several emerging device concepts that are currently being investigated in academic and industrial laboratories for enabling energy efficient brain inspired computing. Early demonstrations of nearly ideal analog switching and the realization that electrochemical ion insertion can be used to tune the electronic properties of many types of materials including transition metal oxides, layered 2D material, organic and coordination polymers, has sparked tremendous interest in ECRAM. Depending on the specific material, the resulting changes in conduction can range from gradual increments needed for analog elements, to large, abrupt changes for dynamically reconfigurable adaptive architectures. At its core, ECRAM shares many fundamental aspects with rechargeable batteries, where ion insertion materials are used extensively for their ability to reversibly store charge and energy. Computing applications, however, present drastically different requirements: systems will require many millions of devices, scaled down to less than 100 nanometers, all while achieving reliable electronic-state tuning at scaled-up rates (~109 Hz) and endurances (>1012 cycles), and with minimal energy dissipation and noise. In my presentation, I will briefly cover the history of ECRAM, the recent progress in devices spanning various types of materials, circuits, architectures, and discuss the rich portfolio of challenging, fundamental questions and how we can harness ECRAM to realize a new paradigm for low power neuromorphic computing.