Phase Winding Research Articles

Фазовий метод виявлення обривів в статорних обмотках асинхронних двигунів

The paper considers the specific features of the technical operation of asynchronous motors in hoisting machines and typical damages to stator windings. It is established that one promising approach to motor protection is the use of computer monitoring systems. These systems' algorithmic and application software includes measuring and controlling stator winding currents. A method for calculating the operating modes of asynchronous motors with a break in one of the parallel branches of the stator phase winding is developed. Based on the derived equations, a computer simulation scheme was compiled using the graph method in the MatLab software environment with the Simulink extension to calculate the symmetric and asymmetric operating modes of an asynchronous motor, considering the current distribution in the parallel branches of the phase windings, and the results of theoretical studies are experimentally confirmed. As a result, graphs are provided to show the relationship between the steady-state temperatures of the stator windings' frontal sections and the values of the phase currents. It is shown that current overload of the operating branch of the damaged phase winding can occur even at the nominal linear current. At the same time, in the operating parallel branch of the phase winding with a break, there is a significant thermal overload, which leads to rapid degradation of the winding insulation materials and the development of a malfunction to a more serious one. A characteristic feature of the operating mode of an asynchronous motor with a break in the parallel branch of the stator phase winding is that at a reduced load, the motor can operate for an extended period without overheating. It is demonstrated that the nature of the asymmetry of linear currents by phase can be used as a diagnostic indicator. Keywords: asynchronous motor, lifting machine, stator winding, break of parallel branch, protection, current overload, diagnostics.

Uhlmann phase winding in Bose-Einstein condensates at finite temperature

Uhlmann phase winding in Bose-Einstein condensates at finite temperature

Improved Reduced Switch Converter Topology for Torque Ripple Reduction in Four-Phase Switched Reluctance Motor Under Dynamic Loading

In this paper, simulation, and performance comparison of a switched reluctance motor (SRM) for a classical asymmetric bridge converter and an improved reduced switch converter topology are provided. In an improved converter, switches are shared by adjacent phases, and one diode is connected in series with each phase winding to avoid reversal of current. Double-phase magnetization is adopted for the analysis of both converter topologies. The performance of both converter topologies are demonstrated using a proportional plus integral (PI) based hysteresis current controller and dynamic load on a 7.5 kW, 8/6 pole, 4- phase SRM. Improved reduced switch converter topology uses half the number of switches as compared to the classical asymmetric bridge converter. According to the simulation results, an improved converter offers superior starting and average torque with less speed settling time. An improved converter reduces the most serious problem of torque ripple in SRM by 50% compared to the classical topology. The reduced switches lower the winding losses and improve the efficiency of the drive system.

Bose-Einstein Condensation of Photons in a Four-Site Quantum Ring.

Thermalization of radiation by contact to matter is a well-known concept, but the application of thermodynamic methods to complex quantum states of light remains a challenge. Here, we observe Bose-Einstein condensation of photons into the hybridized ground state of a coupled four-site ring potential. In our experiment, the periodically closed ring lattice superimposed by a weak harmonic trap for photons is realized inside a spatially structured dye-filled microcavity. Photons thermalize to room temperature, and above a critical photon number macroscopically occupy the symmetric linear combination of the site eigenstates with zero phase winding, which constitutes the ground state of the system. The mutual phase coherence of photons at different lattice sites is verified by optical interferometry.

Conversion of An Existing 3 – Phase BLDC Hub motor to A 6 – Phase BLDC Hub Motor and their Performance Analysis for EV Application

In this research work a six–phase BLDC Hub motor designed, developed by using an existing 3–phase BLDC Hub motor material. This conversion orients towards design modifications in the stator winding layout, the number of phases, the number of hall-sensors, placement of hall-sensors and stator winding commutation. Also, a new controller is designed to commutate the six-phase stator winding. The rotor is kept the same without any modification in geometry and number of magnets. The existing 3–phase BLDC Hub motor, which is used in two – wheel EV application, has 48 slots and 52 magnets and a concentrated double layer winding layout is observed in it. This paper presents a novel direct approach for the conversion of the existing 3–phase BLDC Hub motor to a six–phase BLDC Hub motor. Using this proposed approach, a six-phase winding layout is designed and developed for the existing 48 slots stator of the BLDC Hub motor. This approach reduces the number of iterations to determine the proper phase sequence and phase offset among the phase windings compared to regular Cros’ method. In this work, first the existing 3–phase BLDC Hub motor is dismantled, and its stator is rewound with the six – phase winding layout, which is determined by author’s presented direct approach. The winding was designed in such a way to keep the stator slot fill factor in practical limits. Six hall-sensors placed in the stator slots to identify the position of the rotor. Secondly, a new controller is designed to run the developed six-phase BLDC Hub motor. Six-phase and 3–phase BLDC Hub motors are loaded at common load conditions, for performance comparison, and experimental results of both the motors presented. The results show that the six-phase BLDC Hub motor performs better than the existing 3–phase BLDC Hub motor. Hence, this work proves that the conversion of existing 3–phase BLDC Hub motor to a six–phase BLDC Hub motor is viable and can be adopted commercially.

Real-time observation of coherent spin wave handedness

Magnonics, a crucial domain in information science and technology, utilizes spin waves in magnets as efficient information carriers. While antiferromagnets have been suggested for versatile magnonic platform because of the coexistence of right- and left-handed spin waves, their energetic degeneracy poses challenges for observation through spectral measurements, limiting their applicability. Recent observations of distinct spin wave handedness within the gigahertz regime have reported but, are yet to be demonstrated in terahertz (THz) frequencies of antiferromagnetic spin waves. Most of all, the coherence of spin waves is a key aspect of quantum information. Here, employing THz time-domain spectroscopy—a direct, precise, and easy probe for monitoring coherent spin wave dynamics—we discern chiral antiferromagnetic spin waves of opposite phase windings in the time domain, noting their handedness reversal across the angular momentum compensation temperature in ferrimagnets. We establish a principle for directly measuring the handedness of coherent antiferromagnetic spin waves in ferrimagnets with net magnetic moment M ≠ 0 but angular momentum L = 0. Our multidimensional access in the time and spectral domain enables the accurate determination of critical temperature and the dynamic observation of coherent chiral spin waves simultaneously in a single experiment, with potential applications in exploring other quantum chiral entities.

A novel boost power converter suitable for bearingless switched reluctance motor with wider rotor teeth

Abstract Aiming at the problem that the excitation current build-up speed of the bearingless switched reluctance motor with wider rotor teeth (BSRMWR) is too slow during commutation, this paper proposes a simple structured boost power converter. When the motor is commutation, it uses the winding demagnetization energy to quickly establish the excitation current for the latter phase winding and realizes the low torque ripple operation of the motor on the basis of ensuring the stable levitation of the motor. The topology and working status of the novel power converter are analyzed. On this basis, a 12/8 pole single-winding BSRMWR driving system based on the novel boost power converter is constructed. Through Matlab/Simulink simulation, the feasibility and effectiveness of the novel power converter are verified.

Cloud Dissipation and Disk Wind in the Late Phase of Star Formation

We perform a long-term simulation of star and disk formation using three-dimensional nonideal magnetohydrodynamics. The simulation starts from a prestellar cloud and proceeds through the long-term evolution of the circumstellar disk until ∼1.5 × 105 yr after protostar formation. The disk has size ≲50 au and little substructure in the main accretion phase because of the action of magnetic braking and the magnetically driven outflow to remove angular momentum. The main accretion phase ends when the outflow breaks out of the cloud, causing the envelope mass to decrease rapidly. The outflow subsequently weakens as the mass accretion rate also weakens. While the envelope-to-disk accretion continues, the disk grows gradually and develops transient spiral structures, due to gravitational instability. When the envelope-to-disk accretion ends, the disk becomes stable and reaches a size ≳300 au. In addition, about 30% of the initial cloud mass has been ejected by the outflow. A significant finding of this work is that after the envelope dissipates a revitalization of the wind occurs, and there is mass ejection from the disk surface that lasts until the end of the simulation. This mass ejection (or disk wind) is generated because the magnetic pressure significantly dominates both the ram pressure and thermal pressure above and below the disk at this stage. Using the angular momentum flux and mass-loss rate estimated from the disk wind, the disk dissipation timescale is estimated to be ∼106 yr.

Topological Photonic Alloy.

We present the new concept of photonic alloy as a nonperiodic topological material. By mixing nonmagnetized and magnetized rods in a nonperiodic 2D photonic crystal configuration, we realized photonic alloys in the microwave regime. Our experimental findings reveal that the photonic alloy sustains nonreciprocal chiral edge states even at very low concentration of magnetized rods. The nontrivial topology and the associated edge states of these nonperiodic systems can be characterized by the winding of the reflection phase. Our results indicate that the threshold concentrations for the investigated system within the first nontrivial band gap to exhibit topological behavior approach zero in the thermodynamic limit for substitutional alloys, while the threshold remains nonzero for interstitial alloys. At low concentration, the system exhibits an inhomogeneous structure characterized by isolated patches of nonpercolating magnetic domains that are spaced far apart within a topologically trivial photonic crystal. Surprisingly, the system manifests chiral edge states despite a local breakdown of time-reversal symmetry rather than a global one. Photonic alloys represent a new category of disordered topological materials, offering exciting opportunities for exploring topological materials with adjustable gaps.

Suppression of Initial Charging Torque for Electric Drive-Reconfigured On-Board Charger

This paper presents a new electric drive-reconfigured on-board charger and initial electromagnetic torque suppression method. This proposed reconfigured on-board charger does not need many components added to the original electric drive system: only a connector is needed, which is easy to add. Specifically, the inverter for propulsion is reconfigured as a buck chopper and a conduction path to match the reconfigured windings. Two of the machine phase windings serve as inductors, while the third phase winding is reutilized as a common-mode inductor. In addition, the initial charging torque is generated at the outset of the charging process, which may cause an instant shock or even rotational movement. In order to prevent vehicle movement, the reason for the charging torque and suppression method were analyzed. Further, predictive control of the model based on mutual inductance analysis was adopted, where the charging torque was directly used as a control object in the cost function. Finally, experimental performances were applied to verify the proposed reconfigured on-board charger under constant current and constant voltage charging.

Increasing the efficiency of the automotive generator due to active rectification

Problem. Increasing fuel economy requirements for modern vehicles lead to an increase in their electrification. The rise in the number of electrical systems leads to a higher load on the electrical power supply system, with the vehicle's power load reaching 2-3 kW. Leading automobile companies have begun serial production of vehicles with the new 12/48 V power supply voltage standard. The traditional alternator used today is a synchronous alternator, and rectifier diodes are used to convert the generated AC to DC to charge the battery, which is inefficient. A study of losses in an automobile alternator shows that the diode rectifier creates a significant portion of the machine's losses at low speeds, resulting in increased fuel consumption. The solution to this problem is to use a synchronous rectifier to replace traditional rectifier diodes, thus improving the efficiency of the AC/DC rectifier. Goal: To improve the economic and environmental characteristics of a mild hybrid vehicle through the use of a synchronous two-semi-periodic rectifier with a midpoint in the car generator. Methodology: Analytical methods are used to calculate energy losses on diodes and in the phase windings of the generator when employing a two-semiperiod rectifier with a midpoint, compared to a bridge rectifier. Results: The structure, functions, and operation modes of the synchronous rectification system are considered. The effect of synchronous rectification on the generator efficiency of a mild hybrid vehicle is analyzed. It was determined which configurations of synchronous rectification are more effective from the standpoint of energy saving and under which operating conditions. It was determined that in a two-semiperiod rectifier with a midpoint, compared to a bridge rectifier, there will be the same heating of the phase windings and 2 times fewer losses on the diodes. Practical value: A version of the bridge synchronous rectification system of the 48 V generator for a mild hybrid vehicle using MOSFET transistors and specialized control IC is proposed. A synchronous rectification system and its circuit implementation for a 12 V generator based on a two-semi-periodic rectifier scheme with a midpoint is proposed, which allows increasing the energy efficiency and economy of the automobile generator.

A Simple Magnetic-Flux-Based Method for Localizing High-Resistance Stator Ground Faults in Synchronous Machines

This paper presents a new offline method based on the analysis of the magnetic flux to determine the location of stator ground faults in synchronous machines. First, the defective phase is identified via the insulation resistance (Megger) test, and then the longitudinal axis of the rotor is aligned with the faulty phase winding. During two measuring modes, a voltage is applied separately to each end of the faulty phase while the other end is floating and the core is grounded. The application of the voltage between each terminal of the faulty phase and ground will lead to the circulation of a current through the stator winding to the fault point, being its path closed by the grounded core. A magnetic flux will then be created, which can be sensed indirectly by measuring the induced voltage in the rotor field winding. The fault point can be identified by measuring the applied current or voltage and the magnetic flux created in both measuring modes. Since stator ground faults usually occur via high resistances, the method is extended for the detection of such faults by processing the data using the stationary wavelet transform. The experimental results show that the proposed method is very sensitive and is able to identify the ground fault location for fault resistances up to a few hundred of k-Ohms.

A triple 3-phase fault-tolerant fractional slot concentric winding interior permanent-magnet machine with low space harmonics

A triple 3-phase fault-tolerant fractional slot concentric winding interior permanent-magnet machine with low space harmonics

Open-Circuit Fault-Tolerant Control for Pentagon Winding Connected Five-Phase Current-Source Inverter Based PMSM Drives

Current-source inverter (CSI) is considered as a prospective solution for modern machine drives, for its higher reliability and superior harmonic suppression. The open-circuit fault-tolerant control for five-phase CSI-fed permanent magnet synchronous machine (PMSM) drive with pentagon winding connection is investigated. The switch open-circuit fault and winding open-circuit fault are studied. For the switch open fault, three cases are discussed including single-phase, adjacent two-phase, and nonadjacent two-phase faults. It is indicated that in pentagon circuit, despite the switch of fault phase is disabled, the corresponding phase winding is still connected in the end-to-end power circuit and contributes for torque generation. The new sets of coordinate transformation are proposed, and the mathematical modeling is presented. The fault-tolerant space vector modulation (SVM) techniques are proposed based on the reconstructed vector planes. In addition, the single winding open fault is studied, which is a specific fault case and breaks off the closed pentagon connection. An important conclusion is derived that the pentagon winding connected CSI (PWC-CSI) gains inherent fault-tolerant capability against the single winding open circuit. The control algorithm even does not need to be switched during this typical fault. Experiments are performed on verifying the proposed schemes.

A Magnetic-Geared Machine With Improved Magnetic Circuit Symmetry for Hybrid Electric Vehicle Applications

Magnetic-geared machine (MGM) has been widely investigated as the power split device for hybrid electric vehicles with the inherently high-integration of multi-mechanical ports. It is revealed that the magnetic circuits of armature winding in MGM are essentially asymmetrical for different phases under the magnetic field modulation effect. This inevitably results in unbalanced phase back electromotive force (EMF) waveforms, severe torque ripples, acoustic noise, and difficulty for precise control. To alleviate the asymmetry problem, a generic winding design model is presented for MGMs in this paper, which allows for consideration of all potential winding configurations. Firstly, a novel back EMF harmonic factor is proposed to account for both the harmonic content and asymmetric level in MGM. The genetic algorithm (GA) is further employed to optimize the winding in terms of minimizing the back EMF harmonic factor, armature magnetomotive force harmonic contents, and phase winding resistance. The proposed winding layout exhibits superior filtering capability for three-phase asymmetric magnetic field harmonics. As compared with the conventional integral-slot distributed winding, the MGM with the proposed winding exhibits improved back EMF waveform symmetry, suppressed torque ripple, and reduced core losses. Finally, an experimental prototype is manufactured to validate the effectiveness of asymmetric magnetic field suppression for MGMs. The results show the investigated winding design method is an effective solution to the asymmetric issue of MGMs, paving the way to research opportunities for further improvements.

Bloch oscillations, Landau–Zener transition, and topological phase evolution in an array of coupled pendula

We experimentally and theoretically study the dynamics of a one-dimensional array of pendula with a mild spatial gradient in their self-frequency and where neighboring pendula are connected with weak and alternating coupling. We map their dynamics to the topological Su-Schrieffer-Heeger model of charged quantum particles on a lattice with alternating hopping rates in an external electric field. By directly tracking the dynamics of a wave-packet in the bulk of the lattice, we observe Bloch oscillations, Landau-Zener transitions, and coupling between the isospin (i.e., the inner wave function distribution within the unit cell) and the spatial degrees of freedom (the distribution between unit cells). We then use Bloch oscillations in the bulk to directly measure the nontrivial global topological phase winding and local geometric phase of the band. We measure an overall evolution of 3.1 [Formula: see text] 0.2 radians for the geometrical phase during the Bloch period, consistent with the expected Zak phase of [Formula: see text]. Our results demonstrate the power of classical analogs of quantum models to directly observe the topological properties of the band structure and shed light on the similarities and the differences between quantum and classical topological effects.

Realization of a Three-Switch Leg/Phase Inverter for Nine-Phase Variable Pole– Phase Induction Machine With Phase Grouping Concepts

In this paper, a 3-switch leg/phase inverter topology is realized for 9-phase variable pole-phase induction motor (9Ph-VPIM) drives. The 3-switch legs (3SL) in the proposed inverter are controlled with two non-intersecting phase shifted references to achieve a 3-level voltage excitation for each phase winding. These two non-intersecting references per leg limit the possible modulation index (MI) and may require a higher DC link voltage. The split winding concept and the phase grouping solutions are used to enhance the MI. In the split winding concept, phase winding of the <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2n</i> pole machine is divided into <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">n</i> number of distinct windings and excited with the same voltage for attaining a uniform air gap flux. These coils are called cognate voltage coils (CVC). With these CVCs, different possible groupings are proposed to enhance the MI of a proposed 3SL/phase inverter. The symmetrical and efficient phase grouping solutions are analyzed and tested with an improved modulation index. Moreover, the proposed 9Ph-VPIM drive is controlled with carrier-based 3-φ SVPWM to further enhance the DC link voltage utilization. The proposed inverter will feed the effective phase by a 3-level voltage with suppressed harmonics resulting in a superior torque ripple. The proposed 3SL/phase inverter fed 5-hp 9Ph-VPIM drive is validated with the experimental prototype.

A Decoupled Multichannel Based Wireless SRM System With Tunable Compensation Network and Multifrequency Pulse Density Control

This paper proposes and implements a decoupled multichannel based wireless switched reluctance motor (WSRM) system with tunable compensation network (TCN) and multifrequency pulse density control (MPDC). In previous studies, several wireless motor systems have been proposed. However, there are still some issues such as cross interference, power balance and dynamic speed regulation that are not well considered. The proposed system firstly suppresses the cross interference between receivers via the resonant filters to reduce the coupling between multiple power channels. Then, the switch-controlled capacitor (SCC) are employed to implement a tunable compensation network to ensure power balance and load-independent output characteristics under multiple operation frequencies. Additionally, the speed regulation is realized by the proposed MPDC strategy, which achieves the commutation by switching the operation frequency and energizes the phase winding by adjusting the pulse density of the inverter. Finally, a 120 W prototype with 36 V input voltage is constructed and evaluated. The experimental results validate the improvement of the decoupled power channel and the feasibility of the proposed speed control method. The steady-state and dynamic performance of the proposed system are both tested. The efficiencies and losses of the system are analyzed and the peak efficiency of 83.58% is reached.

Investigation of the processes of origin and development of the eccentricity of the air gap of traction synchronous electric motors

The purpose of the work is to develop a method for diagnosing the processes of origin and development of the eccentricity of the air gap by analyzing the frequency composition of the current vector of the electric motor. The practical significance of this work lies in the possibility of using the developed method for the diagnosis of traction motors. The result of the study was the developed mathematical model of a synchronous electric motor with permanent magnets with shortcircuited turns of the phase winding, which allows to study the behavior of the engine when the air gap between the rotor and the stator changes. Keywords mathematical model, traction motor, permanent magnets, diagnostics, rotor, stator, harmonics, eccentricity

Midpoint Voltage of Bridge Arm Based Fault Diagnosis Method of Inverter and Phase Winding for DSEM

Midpoint Voltage of Bridge Arm Based Fault Diagnosis Method of Inverter and Phase Winding for DSEM