Partial Fracture Research Articles

Patient-reported outcome was close to the Danish background population 6 months after non-surgical treatment of Neer 2-part surgical neck fractures: a prospective cohort study in patients aged 60 or above.

Neer 2-part surgical neck fractures are the most common displaced proximal humerus fractures. We aimed to evaluate patient-reported outcome in a consecutive series of older people receiving nonoperative treatment. This is a single-center prospective cohort study. We included patients aged 60 or above referred to a Danish university hospital. The preregistered protocol followed the recommendations from randomized trials. Patients were followed at the outpatient clinic at 2, 6, and 24 weeks. After 24 weeks, they were evaluated with Oxford Shoulder Score (OSS, 0-48, 48 best) and EuroQoL 5 dimensions, 3 levels (EQ-5D-3L, -0.624 to 1, 1 best). Clinical failure was defined as conversion to surgery or OSS ≤ 24. Population norms were reported to interpret the cohort data, but no formal statistical comparisons between historical cohorts were planned. We used descriptive statistics to report rates and proportions. For 36 months, 268 patients (mean age 76, 79% female) with Neer 2-part surgical neck fractures received non-surgical treatment. After excluding patients with concomitant fractures, dementia, or death, complete follow-up was available for 167 patients. 8 patients (3.0%) had surgery. The mean OSS was 37.2 (SD 8.1), which equals 78% of maximum shoulder function. The norm for the population of the same age and gender was 82%. The mean EQ-5D-3L score was 0.79 (SD 0.16), while the norm for the same-age population was 0.82. 16 (10%) had an OSS score of 24 or below. Non-surgical treatment in older people with Neer 2-part surgical neck fractures resulted after 6 months in patient-reported shoulder function and quality of life close to that of the Danish background population.

Clinical Decision-Making of Repair vs. Replacement of Defective Direct Dental Restorations: A Multinational Cross-Sectional Study With Meta-Analysis.

This web-based survey, conducted across multiple countries, sought to explore the factors that impact the decision-making of clinicians when it comes to managing defective direct restorations. A survey consisting of 14 questions was sent out to dentists in 21 countries through various online platforms. The survey consisted of two sections. The first contained five questions about demographic information, while the second involved eight clinical scenarios. In the second part, participants were tasked with deciding whether to repair or replace defective composite and amalgam restorations. Three thousand six hundred eighty dental practitioners completed the survey. For composite restorations, repair was preferred in scenarios like partial loss or fracture (RR:0.72; 95% CI: 0.58, 0.89; p = 0.002), whereas replacement was favored for secondary caries (RR:2.43; 95% CI: 1.87, 3.16; p < 0.001) and open/defective margins (RR:3.93; 95% CI: 2.68, 5.76;p < 0.001). Amalgam restorations were mostly replaced across all scenarios. The main factors influencing decision-making were caries risk, restoration size, and patient oral hygiene. Substantial heterogeneity was observed across countries. This study underscores the complexity of the decision-making process and the need for evidence-based guidelines to inform clinicians' decisions regarding restoration management. Patient-level factors predominantly influence decision-making, emphasizing the need for individualized approaches. The study reveals that the material type in the original restoration is a critical determinant, with composite restorations being repaired in specific scenarios, while amalgam restorations are consistently replaced across different countries. Key patient and tooth-level factors, such as high caries risk, poor oral hygiene, and restoration size, significantly impact clinicians' decisions, often favoring replacement over repair. These findings underscore the necessity for evidence-based guidelines to assist clinicians in making informed choices, ultimately enhancing the quality of patient care.

Predicting Proximal Humerus Fracture Mechanical Complications: Are Computed Tomography Hounsfield Units the Answer?

The purpose was to determine whether computed tomography (CT) Hounsfield units (HU) as a proxy for bone quality can predict postoperative complications following surgical treatment of proximal humerus fractures. Sixty-six patients with 2-, 3-, or 4-part proximal humerus fractures who underwent surgical fixation at single institution and had complete radiographic data available were included. Radiographic measurements included the deltoid tuberosity index (DTI) on preoperative anterior-posterior shoulder radiographs, and the HU value from the surgical proximal humerus was determined by measuring the humeral head at the midaxial/coronal/sagittal CT image using a circle-type region of interest (≥35 mm2). Postoperative complications recorded were implant failure, development of osteonecrosis, nonunion, and acute periprosthetic fracture. Patients with and without complications were statistically compared, and binary logistic regression was performed to determine whether preoperative proximal humerus CT HU were predictive of complications. Eight patients (12.1%) developed 11 overall complications, with three patients experiencing multiple complications each. Complications included osteonecrosis (4), implant failure (5), nonunion (1), and acute periprosthetic fracture (1). No difference was observed in demographics or Neer or AO/OTA classification between those with and without complications. Patients with complications had markedly lower DTI and overall HU as well as HU in the coronal and sagittal planes. Regression analysis for average DTI demonstrated a higher DTI and had a 10 times decreased risk of complication (P = 0.040, odds ratio = -10.5, 95% confidence interval, 0.000 to 0.616). Regression analysis for average total HU also found a higher HU associated with a decreased risk of complications (P = 0.034, odds ratio = -0.020, 95% confidence interval, 0.980 to 0.962). Logistic regression analysis, including age, age-adjusted Charlson Comorbidity Index, mean DTI, and mean total HU, only found mean total HU to be notable within the model. CT HU may identify patients with poorer bone quality and thus help predict postoperative complications. Diagnostic Level III.

Macro-micro deformation mechanism of tantalum‑tungsten alloy flyer under explosive loading

This study investigates the macro-micro deformation mechanism of tantalum and tantalum‑tungsten alloys under extreme rate loading. Flyers with varying tungsten contents (0 wt%, 2.5 wt%, 5 wt%, 7.5 wt%, 10 wt%) and different texture were subjected to explosive loading tests. Molding and penetration capabilities of the flyers were comprehensively assessed by the mild-steel witness plate, recovered penetrator and plug. Tantalum‑tungsten alloys with 10 wt% tungsten were crushed, forming discrete holes on witness plate, while those flyers with 0 wt%, 2.5 wt%, 5 wt%, and 7.5 wt% tungsten content formed complete circular perforations on the witness plate. Recovered penetrators and plugs indicated partial fracture of pure tantalum. The increased tungsten content in the alloy enhances the penetration stability and recovery integrity of the penetrator, while simultaneously reducing dynamic plastic deformation. Microstructural analysis via Electron Back Scatter Diffraction (EBSD) revealed a robust {111}//Z axial texture at impact side of the penetrator, which weakened with increasing tungsten content; While un-impacted side showed a {110}//Z axial texture. And uniform equiaxial crystalline structures outperformed long strip grain structures subjected. Therefore, the alloys' molding abilities and penetration stabilities ranked as Ta2.5 W > Ta5W > Ta&Ta7.5 W > Ta10W. These findings provide a foundation for the application of tantalum and tantalum‑tungsten alloys under explosive loading.

The current attitudes and practices of dentists in Australia towards composite repair: A cross-sectional survey study.

Whether to replace or repair a composite restoration is controversial and varies among clinicians. This study was designed to collect information on the attitudes and practices of Australian dentists towards composite repair. An electronic 16-item questionnaire was distributed online on Australian clinicians' dental forum with a URL address and instructions on completing the survey. The questionnaire remained accessible for 2 months. The data collected were analysed statistically using descriptive, average rank, Pearson chi-square and Kruskal-Wallis tests at α = 0.05. Repair of composite restorations was a widely accepted treatment modality among surveyed dentists. Despite this, approximately half of clinicians reported the prognosis of repaired restorations to be worse when compared to replacement. The most cited indications for repair were partial loss or fracture of the restoration, while the most common reason for repair was because this treatment modality was more conservative in terms of tooth structure removal. Most important patient factor influencing decision to repair composite restoration was caries risk of the patient (n = 50). Most significant situational factor to consider in decision whether to repair was previous (failed) attempts to repair (n = 74). The most important tooth level factor was the proximity of restoration to pulp (mean statistic rank 2.22). The most common composite surface treatment employed by participants bonding to old composite was acid etching (n = 87), and the main reason participants employed their chosen surface treatment was based on personal experience (n = 72). The repair of composite restorations was a commonly performed procedure that is well accepted but may still be viewed as an inferior treatment to replacement by many Australian dentists. Most dentists agreed on indications for repair restorations and surface conditioning techniques, but there was wide variation in opinions overall. Due to the lack of high-quality evidence regarding composite repair techniques, dentists tend to rely on personal experience to guide their clinical decisions.

Non-union of the greater tuberosity in patients undergoing reverse total shoulder arthroplasty for proximal humerus fracture: Is it associated with worse outcomes?

4-part proximal humerus fractures are complex injuries that are often associated with comminution of the greater tuberosity. The purpose of this study is to evaluate the functional outcomes of 4-part humerus fractures that are treated with reverse total shoulder arthroplasty (rTSA) and correlate these outcomes with the healing status of the greater tuberosity. A retrospective observational study was performed including 65 patients who underwent rTSA following a 4-part proximal humerus fracture. These patients were categorized into 3 groups according to the healing status of the greater tuberosity: patients with healed greater tuberosity in an anatomical position (group A, n = 43), patients with non-union of the greater tuberosity but in anatomical position (group B, n = 14), and patients with resorption or non-union of the greater tuberosity not in anatomical position (group C, n = 8). The Constant-Murley score and range of motion were recorded for each patient at 12months postoperatively. The clinical and radiographical outcomes of the 3 groups were compared. Patients with healed greater tuberosity (group A) had higher range of motion compared to patients with greater tuberosity migration or reabsorption (group C) regarding forward flexion (130° vs 80°, p < 0.001), abduction (110° vs 65°, p < 0.001) and external rotation (20° vs 10°, p = 0.004). However, no significant changes regarding forward flexion (130° vs 125°, p = 0.67), abduction (110° vs 100°, p = 0.60) and external rotation (20° vs 25°, p = 0.37) were noted between patients with healed greater tuberosity (group A) and those with non-united greater tuberosity that remained attached to the humeral prosthesis (group B). Similarly, Constant- Murley score was similar between patients of group A and group B (65.0 vs 61.5, p = 0.53), while it was higher in patients of group A compared to those of group C (65.0 vs 39.0, p = 0.053). The outcomes of this study indicate that reliable recovery regarding range of motion and functional status can be achieved in patients who undergo rTSA due to 4-part proximal humerus fractures, as long as the greater tuberosity remains in close proximity to the humeral prosthesis, even if it has signs of non-union with no continuity to the adjacent humerus.

Development of the humeral head offset index for control of humeral torsion

BackgroundControl of humeral torsion can present a challenge, especially intraoperatively during closed reduction and fixation of humeral shaft fractures or 2-part surgical neck fractures of the proximal humerus. The objective of this study is to develop and validate an indirect method for the assessment of humeral torsion using an index that is linearly correlated with rotational arm position and can be derived from only a single plain radiographic image of the proximal humerus.MethodsThe Humeral Head Offset Index (HHOI) is calculated as the ratio of the medial and lateral offset of the humeral head measured from the outer cortices of the shaft on a plain radiographic or fluoroscopic image. The relationship of HHOI with humeral torsion was first verified on a sawbone model with radiopaque characteristics under fluoroscopic control. Different degrees of retroversion were simulated through manual rotation of the humerus with a digital protractor in 5° increments until 40° internally rotated and then in 5° increments until 40° externally rotated from the neutral position. The same procedure was subsequently performed digitally on Digitally Reconstructed Radiographs (DRRs) from computed tomography (CT) dataset of the sawbone. Next, the HHOI index was applied to eight randomly selected patients with total humerus CT using the same method. Spearman’s rho was calculated for the bivariate analysis of correlation between the simulated degree of retroversion and the HHOI. Strength of correlation was classified according to Koo and Li. Interrater and intrarater reliability of three blinded observers with repetition of measurement after three months were analyzed by assessing the intraclass correlation coefficient (ICC).ResultsBoth in the sawbone model and in DRRs, we demonstrated a high to very high significant linear correlation between simulated retroversion and the HHOI. ICC values demonstrated excellent interrater reliability and excellent intrarater reliability for measurement of the HHOI.ConclusionsThe HHOI is a new, simple, reliable index that has a linear relationship to the rotation of the humerus and can therefore allow an indirect control of humeral torsion in comparison to the contralateral side.

Effect of Linggui Zhugan Decoction on myocardial fibrosis and Lats1/Yap signaling pathway in mice after myocardial infraction

This study aims to investigate the effects of Linggui Zhugan Decoction(LGZGD) on myocardial fibrosis(MF) and the Lats1/Yap signaling pathway in mice after myocardial infarction(MI), exploring its role and mechanism in inhibiting MF. The MI-induced ischemic mouse model was established by left anterior descending coronary artery ligation, followed by continuous intervention for six weeks. Doppler ultrasound imaging-system of small animals was used to detect left ventricular ejection fraction(LVEF), left ventricular fractional shortening(LVFS), left ventricular internal diameter at end-systole(LVIDs), and left ventricular internal diameter at end-diastole(LVIDd). Pathological changes in myocardial tissue were observed by HE and Masson staining. Serum levels of creatine kinase isoenzyme MB(CK-MB) and lactate dehydrogenase(LDH) were detected by using ELISA. Myocardial tissue mRNA levels of Lats1, Yap, and connective tissue growth factor(CTGF) were determined by RT-qPCR. Protein expression of alpha-smooth muscle actin(α-SMA), collagen Ⅰ(Col Ⅰ), collagen Ⅲ(Col Ⅲ), tissue inhibitor of metal protease 1(TIMP1), matrix metallopeptidase 2(MMP2), Yap, p-Yap, and n-Yap was determined by Western blot. Compared with the sham group, the model group showed significantly decreased LVEF and LVFS levels, increased LVIDd and LVIDs levels(P&lt;0.01), disordered arrangement of myocardial cells, partial fracture of myocardial fibers, and massive deposition of collagen fibers. Moreover, serum levels of CK-MB and LDH were significantly increased(P&lt;0.01), while myocardial tissue mRNA levels of Lats1 were significantly decreased(P&lt;0.01), and mRNA levels of Yap and CTGF were significantly increased(P&lt;0.01). Protein expression of α-SMA, Col Ⅰ, Col Ⅲ, MMP2, Yap, and n-Yap was significantly increased(P&lt;0.01), while protein expression of Lats1, TIMP1, p-Yap, and the ratio of p-Yap/Yap were significantly decreased(P&lt;0.01). Compared with the model group, after intervention with LGZGD(9.36 g·kg~(-1)), mice showed significantly increased LVEF and LVFS levels, decreased LVIDd and LVIDs levels(P&lt;0.01), more orderly arrangement of myocardial cells, significantly reduced myocardial fiber fracture and collagen fiber deposition. Serum levels of CK-MB and LDH were significantly decreased(P&lt;0.01), while myocardial tissue mRNA levels of Lats1 were significantly increased(P&lt;0.01), and mRNA levels of Yap and CTGF were significantly decreased(P&lt;0.01). Protein expression of α-SMA, Col Ⅰ, Col Ⅲ, MMP2, Yap, and n-Yap was significantly decreased(P&lt;0.01), while protein expression of Lats1, TIMP1, p-Yap, and the ratio of p-Yap/Yap were significantly increased(P&lt;0.01). LGZGD can inhibit MF in mice after MI and improve mouse cardiac function, which is closely related to the activation of the Lats1/Yap signaling pathway.

Clinical validation of artificial intelligence-based preoperative virtual reduction for Neer 3- or 4-part proximal humerus fractures

BackgroundIf reduction images of fractures can be provided in advance with artificial-intelligence (AI)-based technology, it can assist with preoperative surgical planning. Recently, we developed the AI-based preoperative virtual reduction model for orthopedic trauma, which can provide an automatic segmentation and reduction of fractured fragments. The purpose of this study was to validate a quality of reduction model of Neer 3- or 4-part proximal humerus fractures established by AI-based technology.MethodsTo develop the AI-based preoperative virtual reduction model, deep learning performed the segmentation of fracture fragments, and a Monte Carlo simulation completed the virtual reduction to determine the best model. A total of 20 pre/postoperative three-dimensional computed tomography (CT) scans of proximal humerus fracture were prepared. The preoperative CT scans were employed as the input of AI-based automated reduction (AI-R) to deduce the reduction models of fracture fragments, meanwhile, the manual reduction (MR) was conducted using the same CT images. Dice similarity coefficient (DSC) and intersection over union (IoU) between the reduction model from the AI-R/MR and postoperative CT scans were evaluated. Working times were compared between the two groups. Clinical validity agreement (CVA) and reduction quality score (RQS) were investigated for clinical validation outcomes by 20 orthopedic surgeons.ResultsThe mean DSC and IoU were better when using AI-R that when using MR (0.78 ± 0.13 vs. 0.69 ± 0.16, p < 0.001 and 0.65 ± 0.16 vs. 0.55 ± 0.18, p < 0.001, respectively). The working time of AI-R was, on average, 1.41% of that of MR. The mean CVA of all cases was 81%±14.7% (AI-R, 82.25%±14.27%; MR, 76.75%±14.17%, p = 0.06). The mean RQS was significantly higher when AI-R compared with MR was used (91.47 ± 1.12 vs. 89.30 ± 1.62, p = 0.045).ConclusionThe AI-based preoperative virtual reduction model showed good performance in the reduction model in proximal humerus fractures with faster working times. Beyond diagnosis, classification, and outcome prediction, the AI-based technology can change the paradigm of preoperative surgical planning in orthopedic surgery.Level of evidenceLevel IV.

Lateral Wall Integrity of the Greater Tuberosity Is Important for the Stability of Osteoporotic Proximal Humeral Fractures After Plate Fixation.

Previous studies assessing surgical fixation of osteoporotic proximal humeral fractures have primarily focused on medial calcar support. In this study, we utilized a specific model for 2-part surgical neck fracture of the osteoporotic proximal humerus to investigate how severe comminution of the greater tuberosity (GT) lateral wall affects biomechanical stability after fixation with a plate. Ten matched pairs of cadaveric humeri (right and left) were assigned to either a surgical neck fracture alone (the SN group) or a surgical neck fracture with GT lateral wall comminution (the LW group) with use of block randomization. We removed 5 mm of the lateral wall of the GT to simulate severe comminution of the lateral wall. Axial compression stiffness, torsional stiffness, varus bending stiffness, and the single load to failure in varus bending were measured for all plate-bone constructs. Compared with the SN group, the LW group showed a significant decrease in all measures, including torsional stiffness (internal, p = 0.007; external, p = 0.007), axial compression stiffness (p = 0.002), and varus bending stiffness (p = 0.007). In addition, the mean single load to failure in varus bending for the LW group was 62% lower than that for the SN group (p = 0.005). Severe comminution of the GT lateral wall significantly compromised the biomechanical stability of osteoporotic, comminuted humeral surgical neck fractures. Although the generalizability of this cadaveric model may be limited to the extreme clinical scenario, the model showed that severe comminution of the GT lateral wall significantly compromised the stability of osteoporotic humeral surgical neck fractures fixed with a plate and screws alone.

Comparison of Optical Properties and Fracture Loads of Multilayer Monolithic Zirconia Crowns with Different Yttria Levels.

Multilayer monolithic zirconia, which incorporates polychromatic layers that mimic natural tooth gradients, offers enhanced aesthetics and functionality while reducing debonding risks and improving fabrication efficiency. However, uncertainties remain regarding the fracture characteristics of multilayer monolithic zirconia crowns under occlusal loading, whether composed of uniform or combined yttria levels. The current study investigated how variations in yttria levels and thicknesses affected the optical properties and fracture loads of multilayer monolithic zirconia. Samples of multilayer monolithic zirconia in the Vita A1 shade were used, while employing 3Y (SZ) and 4Y + 5Y (AZ) yttria levels. The optical properties, including the color difference (ΔEWS) and translucency parameters (TP00), were measured using a digital colorimeter. The fracture loads were analyzed using a universal testing machine, and fractured surfaces were examined under a stereomicroscope. Statistical analyses assessed the impacts of the yttria levels and sample thicknesses on the optical properties. The ΔEWS values of SZ ranged 3.6 to 4.0, while for AZ, ΔEWS at 0.5 mm was 3.9 and <2.6 for other thicknesses. The TP00 values decreased with an increased thickness, with AZ generally exhibiting greater translucency than SZ. In the fracture load investigations, SZ (>1600 N) generally exceeded AZ (>1260 N), with fracture loads notably increasing with thickness, particularly for premolars (SZ > 3270 N, AZ > 2257 N). SZ predominantly exhibited partial and complete fractures, whereas AZ showed fewer non-fracture categorizations. Complete fractures began with dense, irregular cracks that extended outward to reveal smooth surfaces, while premolars subjected to higher loads exhibited concentric ripple-like structures. Partial fractures revealed radial textures indicative of areas of stress concentration. In summary, higher yttria levels were correlated with increased translucency, while variations in the fracture loads primarily stemmed from differences in the tooth position or thickness. Overall, multilayer monolithic zirconia incorporating combined yttria levels of 4Y + 5Y (AZ) offered high translucency, precise color matching, and substantial fracture resistance, rendering it highly suitable for aesthetic and functional dental applications.

Dynamic propagation of tensile and shear fractures induced by impact load in rock based on the dual bilinear cohesive zone model

PurposeThe purpose of this study is to simulate the tensile and shear types of fractures using the mixed fracture criteria considering the energy evolution based on the dual bilinear cohesive zone model and investigate the dynamic propagation of tensile and shear fractures induced by an impact load in rock. The propagation of tension and shear at different scales induced by the impact load is also an important aspect of this study.Design/methodology/approachIn this study, based on the well-developed dual bilinear cohesive zone model and combined finite element-discrete element method, the dynamic propagation of tensile and shear fractures induced by the impact load in rock is investigated. Some key technologies, such as the governing partial differential equations, fracture criteria, numerical discretisation and detection and separation, are introduced to form the global algorithm and procedure. By comparing with the tensile and shear fractures induced by the impact load in rock disc in typical experiments, the effectiveness and reliability of the proposed method are well verified.FindingsThe dynamic propagation of tensile and shear fractures in the laboratory- and engineering-scale rock disc and rock strata are derived. The influence of mesh sensitivity, impact load velocities and load positions are investigated. The larger load velocities may induce larger fracture width and entire failure. When the impact load is applied near the left support constraint boundary, concentrated shear fractures appear around the loading region, as well as induced shear fracture band, which may induce local instability. The proposed method shows good applicability in studying the propagation of tensile and shear fractures under impact loads.Originality/valueThe proposed method can identify fracture propagation via the stress and energy evolution of rock masses under the impact load, which has potential to be extended into the investigation of the mixed fractures and disturbance of in-situ stresses during dynamic strata mining in deep energy development.

Assessing Functional Outcome of PHILOS Plate Fixation in Proximal Humerus Fractures- A Prospective Study

Introduction: Despite the availability of numerous treatment options, managing unstable proximal humeral fractures remains a significant surgical challenge. Utilizing a PHILOS plate is an effective surgical technique for addressing these fractures. This approach provides stability and support to the fracture site, promoting proper healing and potentially improving patient outcomes. Aim of the study: The aim of this study was to assess the functional outcome of PHILOS plate fixation in proximal humerus fractures. Methods: This prospective study was conducted in the the Department of Orthopedic Surgery, National Institute of Traumatology and Orthopedic Rehabilitation (NITOR), Sher-e-Bangla Nagar, Dhaka, Bangladesh during the period from January 2009 to December 2010. A total of 80 patients aged over 18 years were included in the study. Patients with open, pathological and ipsilateral distal fractures in the same limb were excluded from the study. Result: The youngest and the oldest one were 23 and 78 years respectively. Majority of the patients were male and business was their main occupation. Fifty patients (62.5%) presented with 3-part fractures, ten (12.5%) with four-part fractures and twenty (25%) with fracture dislocation. The interval between injury and plate fixation was 18 days and minimum and maximum interval was 2 and 78 days respectively. Majority (92.5%) of the injury was caused by high-velocity accident. Evaluation of the outcome at 6 months showed that 62.5 percent of patients had good outcome, 25 percent patients had fair outcome. Conclusion: PHILOS plate fixation for proximal humeral fractures provides stable fixation and good functional outcomes, particularly in elderly patients.

Comparative analysis of 'functional excision' of heterotopic ossification around the hip - computed tomography (CT) navigation guided versus conventional excision.

We aim to analyse and compare the efficacy of the excision of HO around the hip with and without CT-guided navigation. We also aim to compare the functional outcome between CT navigation guided versus conventional excision of HO. This study is a retrospective analysis of prospectively collected data from 2015 to 2022. There were 23 patients (24 hips) in the final cohort. Intraoperative CT navigation guided excision was performed in 7 hips and conventional excision of HO was done in 17 hips. The HO was classified by Brooker's grading in radiographs. CT scan was taken preoperatively in all patients to exactly identify the volume, location and preoperative planning. The functional outcome was analysed according to Harris Hip Score (HHS) and International Hip Outcome Tool (iHOT) for self-ambulatory patients and improvement in the sitting or nursing care was assessed in patients mobilising with wheelchair or walker support. Any complications or recurrence noted postoperatively and in follow-up were recorded. The mean follow-up was 41.2 months in the CT navigation-guided excision group and 55 months in the conventional excision group. According to Brooker's grading, grade IV was present in 20 hips and grade III in four hips. Twelve patients were self-ambulatory and the other 12 patients were requiring support for mobilisation. There was a significant improvement in the HHS from 21.3 ± 3.7, 18.3 ± 2.5 preoperatively to 75.2 ± 8.3, 72.2 ± 4.3 postoperatively in the CT navigation guided and conventional group respectively (p < 0.001) in the self-ambulatory group. There was one anterior wall and one partial posterior wall fracture in the conventional group. One patient in the conventional group had a deep infection and recurrence. One patient had a superficial infection and another had superficial vein thrombosis in the CT guided excision group. Intraoperative CT navigation helps to exactly localize the HO and facilitates safe excision. Functional excision of the HO leads to better nursing care and functional outcomes between both groups.

Superior functional outcome following reverse shoulder arthroplasty compared to hemiarthroplasty for displaced three- and four-part fractures in patients 65 and older: results from a prospective multicenter randomized controlled trial - The shoulder hemiarthroplasty or reverse polarity arthoplasty (SHeRPA) trial

BackgroundAcute unreconstructible 3- or 4-part proximal humerus fractures can be treated with hemiarthroplasty or reverse polarity shoulder arthroplasty. Randomized trials using implants from multiple different companies or uncemented implants have found superior results with reverse polarity arthroplasty. AimsThis study aims to determine whether cemented reverse polarity arthroplasty produces a superior outcome compared to cemented hemiarthroplasty using one implant system in patients aged 65 years and over at 12 months follow-up as measured with the Constant score. MethodsA prospective patient and assessor blinded multicenter randomized controlled trial was conducted of shoulder hemiarthroplasty or reverse polarity arthroplasty in patients aged 65 years and older with acute 3- and 4-part proximal humerus fracture not amenable to osteosynthesis. The primary outcome was the Constant score at 12 months with total follow-up to 24 months. Block randomization by site was undertaken using random number generation and sealed envelopes. Power analysis indicated that 17 patients were required in each arm to achieve 80% power with an alpha-value of 5%. Secondary outcome measures were the difference in the mean Constant Score, Quick Disabilities of the Arm Shoulder and Hand Questionnaire (QuickDASH), Oxford Shoulder Score (OSS), American Shoulder and Elbow Surgeons (ASES) Score and EQ5D-5L up to two years; differences in complication rate at one and two years; differences in revision and implant failure at one and two years. Results18 patients were randomized to hemiarthroplasty and 18 to reverse polarity arthroplasty across 4 sites. The primary outcome as measured by the Constant score at 12 months was better in the reverse polarity shoulder arthroplasty (RSA) group (Mean 51.1, s.d. 14.9) compared to the hemiarthroplasty (HA) group (mean 35.0, s.d. 13.5) (p=0.004). No significant difference was reported at 24 months but this may be due to high rates of attrition (22%). The mean EQ-5D-5L patient rated health status score was significantly higher in the RSA group compared to the HA group at 12 months. One hemiarthroplasty was revised due to implant uncoupling and one reverse polarity shoulder replacement was revised due to instability. No other complications were recorded. DiscussionTreatment of unreconstructible 3- or 4-part proximal humerus fractures with reverse polarity shoulder arthroplasty results in a superior outcome compared to shoulder hemiarthroplasty at 12 months measured with the Constant score with no increased risk of failure up to 24 months in patients age 65 years and over. High attrition rates are observed in this older population due to cognitive decline and death from other causes.

Effect of die design on microstructure and mechanical joint strength in friction self-piercing riveted AA7055-T76 and AA7055-T76

In the present study, a unique friction self-piercing riveting (F-SPR) was applied to join high-strength, low-ductility aluminum alloy (AA) 7055-T76 and AA7055-T76 to mitigate a cracking issue. Also, the effect of die design on both joint formation and the mechanical joint performance were investigated. A crack-free joint was achieved when joining AA7055-T76 and AA7055-T76 by F-SPR. As the bottom diameter of the die increased, the mechanical interlocking distance initially increased then became almost saturated. At the same time, the solid-state bonding gradually disappeared, and the lap-shear fracture changed from bottom aluminum fracture to rivet pull-out with partial bottom aluminum fracture. The average maximum lap-shear joint strength of 11.57 kN and cross tension of 5.65 kN were achieved from the D2 die design owing to the combined contributions from high mechanical interlocking distance and good solid-state bonding at the joint interface. Ultrafine grain refinement was observed at the region next to the rivet shank outer surface and along the materials flow line between the top and bottom aluminum sheet in the rivet cavity. Because of the same joint-process parameters, the hardness profile at the joints made by different dies did not show obvious differences. As the distance from the base metal to the rivet outer surface decreased, frictional heat caused the hardness to initially decrease from 190 to 150 HV in the heat-affected zone. Hardness increased up to 175 HV in the thermomechanical affected zone (TMAZ-I) owing to large plastic deformation.

THE ACUTE MANAGEMENT OF PILON FRACTURES (ENFORCE) STUDY: A TRAINEE-LED NATIONAL COLLABORATIVE EVALUATION OF PRACTICE

IntroductionTibial Pilon fractures are potentially limb threatening, yet standards of care are lacking from BOFAS and the BOA. The mantra of “span, scan, plan” describes staged management with external fixation to allow soft tissue resuscitation, followed by a planning CT-scan. Our aim was to evaluate how Tibial Pilon fractures are acutely managed.MethodsENFORCE was a multi-centre retrospective observational study of the acute management of partial and complete articular Tibial Pilon fractures over a three-year period. Mechanism, imaging, fracture classification, time to fracture reduction and cast, and soft tissue damage control details were determined.Results656 patients (670 fractures) across 27 centres were reported. AO fracture classifications were: partial articular (n=294) and complete articular (n=376). Initial diagnostic imaging mobilities were: plain radiographs (n=602) and CT-scan (n=54), with all but 38 cases having a planning CT-scan. 526 fractures had a cast applied in the Emergency Department (91 before radiological diagnosis), with the times taken to obtain post cast imaging being: mean 2.7 hours, median 2.3 hours, range 28 mins – 14 hours). 35% (102/294) of partial articular and 57% (216/376) of complete articular (length unstable) fractures had an external fixator applied, all of which underwent a planning CT-scan. Definitive management consisted of: open reduction internal fixation (n=495), fine wire frame (n=86), spanning external fixator (n=25), intramedullary nail (n=25), other (n=18).ConclusionThe management of Tibial Pilon fractures is variable, with prolonged delays in obtaining post cast reduction radiographs, and just over half of length unstable complete articular fractures being managed with the gold standard “span, scan, plan” staged soft tissue resuscitation. A BOFAS endorsed BOAST (British Orthopaedic Association Standard for Trauma) for Tibial Pilon fractures is suggested for standardisation of the acute management of these potentially limb threatening injuries, together with setting them apart from more straightforward ankle fractures.

Current Concepts in Management of Distal Femur Fractures

Recent studies report the overall incidence of distal femur fractures as 8.7/100,000/year. This incidence is expected to rise with high energy motor vehicle collisions and elderly osteoporotic fractures in native and prosthetic knees keep increasing. These fractures are more common in males in the younger age spectrum while females predominate for elderly osteoporotic fractures. Surgical treatment is recommended for these fractures to maintain articular congruity, enable early joint motion and assisted ambulation. Over the last two decades, development of minimally invasive and quadriceps sparing surgical approaches, availability of angle stable implants have helped achieve predictable healing and early return to function in these patients. Currently, laterally positioned locked plate is the implant of choice across all fracture patterns. Retrograde with capital implantation of intramedullary nails with provision for multiplanar distal locking is preferred for extra-articular and partial articular fractures. Even with these advancements, nonunion after distal femur fracture fixation can be as high as 19%. Further recent research has helped us understand the biomechanical limitations and healing problems with lateral locked plate fixation and intramedullary nails. This has lead to development of more robust constructs such as nail-plate and double plate constructs aiming for improved construct strength and to minimise failures. Early results with these combination constructs have shown promise in high risk situations such as fractures with extensive metaphyseal fragmentation, osteoporosis and periprosthetic fractures. These constructs however, run the risk of being over stiff and can inhibit healing if not kept balanced. The ideal stiffness that is needed for fracture healing is not clearly known and current research in this domain has lead to the development of smart implants which are expected to evolve and may help improve clinical results in future.

Mechanism of efficient adsorption for arsenic in aqueous solution by zeolitic imidazolate framework‑8.

Arsenic (As) is one extremely hazardous and carcinogenic metalloid element. Due to mining, metal smelting, and other human activities, the pollution of water (especially groundwater) and soil caused by As is increasingly serious, which badly threatens the environment and human health. In this study, a zeolite imidazolate framework (ZIF-8) was synthesized at room temperature and employed as an adsorbent to facilitate the adsorption of As(III) and As(V) from the solution. The successful synthesis of ZIF-8 was demonstrated by X-ray diffraction (XRD), and scanning electron microscopy (SEM) revealed that its particle size was approximately 80nm. The adsorption kinetics, adsorption isotherm, solution pH, dose, coexisting ions, and the synonymous elements antimony (Sb) were conducted to study the adsorption of As by ZIF-8 nanoparticles. The maximum saturation adsorption capacity was determined to be 101.47mg/g and 81.40mg/g for As(III), and As(V) at initial pH = 7.0, respectively. Apparently, ZIF-8 had a good removal effect on As, and it still maintained a good performance after four cycles. The coexisting ions PO43- and CO32- inhibited the adsorption of both As(III) and As(V). ZIF-8 performed well in removing both As and Sb simultaneously, although the presence of Sb hindered the adsorption of both As(III) and As(V). Both FTIR and XPS indicated the adsorption mechanism of As on ZIF-8: ZIF-8 generates a large amount of Zn-OH on the surface through hydrolysis and partial fracture of Zn-N, both of which form surface complexes with As.

SOME CLINICAL CHARACTERISTICS OF ADULT PATIENTS TREATED BY OSTEOSYNTHESIS METHOD FOR THE PROXIMAL HUMERUS FRACTURE

Objectives: To describe some clinical characteristics of adult patients with closed proximal humerus fracture (PHF), treated by osteosynthesis method with locking plate. Subjects and methods: Adult patients who were closed PHF treated by open reduction and locking plate fixation at Military hospital 175. Report of a retrospective study conducted on 42 clinical cases. Results: The average age for both gender was 51.38 ± 14.63, the age group over 60 accounted for 26.19%. The ratio of female/male patients was 1.1/1, the difference was not statistically significant (p&gt;0.05). The cause of injury due to traffic accidents (TA) accounted for the highest rate at 73.81%, due to daily life accidents (DLA) accounted for 21.43%, and due to work accidents (WA) accounted for 4.76%. Anatomical damage of PHF according to the classification of author Neer C.S. on X-ray, including groups III, IV, V, VI, 3-part fractures accounted for the highest proportion with 54.76%. Conclusion: The patients in the study group were mostly middle-aged from 18 to 60 years old. The main cause of TA was the age group from 18 to 60, which was the group with a large traffic demand (accounting for 80.64%), the majority of injuries had 3-4 broken parts (accounting for 61.29%), due to DLA, mainly in the group of people over 60 years old (accounting for 55.56%) with 3-4 broken parts accounting for 66.67%.