2-ethylhexyl Methacrylate Research Articles

RAFT Dispersion PISA with Poly(methyl methacrylate) as Stabilizer Block in Alcohol/Water: Unconventional PISA Morphology Transitions.

Reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization-induced self-assembly (PISA) was conducted in the presence of poly(methyl methacrylate) (PMMA) stabilizer in ethanol/water mixture (80/20 by volume). Two different systems were explored by utilizing (i) 2-ethylhexyl methacrylate (EHMA) and (ii) n-butyl methacrylate (BMA). The morphology transitions of these systems were investigated by varying the polymerization conditions, i.e., the presence of the solvophilic comonomer MMA, the solids content, and the target degree of polymerization (DP). As observed in conventional PISA, the presence of solvophilic comonomer, increase in solids content and target DP promoted the formation of high-order morphology. However, unusual morphology transitions were observed whereby the morphology transformed from high-order morphologies to a mixture of spherical nanoparticles, worms, and vesicles and finally to vesicles with increasing target DP. This unusual evolution may be attributed to the limited solubility of PMMA in the ethanol/water solvent mixture, whereby PMMA is soluble at the polymerization temperature but insoluble at lower temperatures.

Stability Enhancement by Hydrophobic Anchoring and a Cross-Linked Structure of a Phospholipid Copolymer Film for Medical Devices.

Surface modification using zwitterionic 2-methacryloyloxyethylphosphorylcholine (MPC) polymers is one of the most reasonable ways to prepare medical devices that can suppress undesired biological reactions such as blood coagulation. Usable MPC polymers are hydrophilic and water soluble, and their surface modification strategy involves exploiting the copolymer structures by adding physical or chemical bonding moieties. In this study, we developed copolymers composed of MPC, hydrophobic anchoring moiety, and chemical cross-linking unit to clarify the role of hydrophobic interactions in achieving biocompatible and long-term stable coatings. The four kinds of MPC copolymers with cross-linking units, such as 3-methacryloxypropyl trimethoxysilane (MPTMSi), and four different hydrophobic anchoring moieties, such as 3-(methacryloyloxy)propyltris(trimethylsiloxy)silane (MPTSSi) named as PMMMSi, n-butyl methacrylate (BMA) as PMBSi, 2-ethylhexyl methacrylate (EHMA) as PMESi, and lauryl methacrylate as PMLSi, were synthesized and coated on polydimethylsiloxane, polypropylene (PP), and polymethyl pentene. These copolymers were uniformly coated on the substrate materials PP and poly(methyl pentene) (PMP), to achieve hydrophilic and electrically neutral coatings. The results of the antibiofouling test showed that PMBSi repelled the adsorption of fluorescence-labeled bovine serum albumin the most, whereas PMLSi repelled it the least. Notably, all four copolymers suppressed platelet adhesion similarly. The variations in protein adsorption quantities among the four copolymer coatings were attributed to their distinct swelling behaviors in aqueous environments. Further investigations, including 3D scanning force microscopy and neutron reflectivity measurements, revealed that the PMLSi coating exhibited a higher water intake under aqueous conditions in comparison to the other coatings. Consequently, all copolymer coatings effectively prevented the invasion of platelets but the proteins penetrated the PMLSi network. Subsequently, the dynamic stability required to induce shear stress was evaluated using a circulation system. The results demonstrated that the PMMMSi and PMLSi coatings on PMP and PP exhibited exceptional platelet repellency and maintained high stability during circulation. This study highlights the potential of hydrophobic moieties to improve hemocompatibility and stability, offering potential applications in medical devices.

Eliminating the Tg-confinement and fragility-confinement effects in poly(4-methylstyrene) films by incorporation of 3 mol % 2-ethylheyxl acrylate comonomer.

Nanoconfined poly(4-methylstyrene) [P(4-MS)] films exhibit reductions in glass transition temperature (Tg) relative to bulk Tg (Tg,bulk). Ellipsometry reveals that 15-nm-thick P(4-MS) films supported on silicon exhibit Tg - Tg,bulk = - 15 °C. P(4-MS) films also exhibit fragility-confinement effects; fragility decreases ∼60% in going from bulk to a 20-nm-thick film. Previous research found that incorporating 2-6 mol % 2-ethylhexyl acrylate (EHA) comonomer in styrene-based random copolymers eliminates Tg- and fragility-confinement effects in polystyrene. Here, we demonstrate that incorporating 3 mol % EHA in a 4-MS-based random copolymer, 97/3 P(4-MS/EHA), eliminates the Tg- and fragility-confinement effects. The invariance of fragility with nanoconfinement of 97/3 P(4-MS/EHA) films, hypothesized to originate from the interdigitation of ethylhexyl groups, indicates that the presence of EHA prevents the free surface from perturbing chain packing and the cooperative mobility associated with Tg. This method of eliminating confinement effects is advantageous as it relies on the simplest of polymerization methods and neat copolymer only slightly altered in composition from homopolymer. We also investigated whether we could eliminate the Tg-confinement effect with low levels of 2-ethylhexyl methacrylate (EHMA) in 4-MS-based or styrene-based copolymers. Although EHMA is structurally nearly identical to EHA, 4-MS-based and styrene-based copolymers incorporating 4 mol % EHMA exhibit Tg-confinement effects similar to P(4-MS) and polystyrene. These results support the special character of EHA in eliminating confinement effects originating at free surfaces.

Vat photopolymerization using catalytic chain transfer polymerization (CCTP) derived reactive oligomers to influence mechanical properties

ω-Vinyl terminated reactive oligomers of 2-ethylhexyl methacrylate and poly(ethylene glycol)methacrylate (PEGMA) were synthesized via CCTP and subsequent addition–fragmentation chain transfer (AFCT) polymerization.

Improved electro-actuated property of polydimethylsiloxane-based dielectric elastomer by designing a Bi-network structure

Dielectric elastomers (DEs) have a great potential in applications as smart materials such as artificial muscles and flexible robotics, due to their advantages of large deformation, good flexibility and fast actuation response. However, the excellent electro-actuation performance of DE materials is always achieved under high electric fields, which limits their widespread application. Herein, the synthesized acrylate-based copolymer E8G2 (the molar ratio between 2-ethylhexyl acrylate and glycidyl methacrylate is 8:2) was incorporated into the polydimethylsiloxane (PDMS) matrix by solution mixing and compression molding to prepared a series of bi-network DE composites. The design of the all-organic bi-network structure not only regulates the dielectric-flexibility of E8G2/PDMS composites synchronously but also relieves the problem of plasticizer exudation. The E8G2/PDMS composites achieved a remarkable electro-actuated strain of 43.86 % at 50 V/μm, which is improved by 431.08 % compared with pure PDMS (6.95 %). Consequently, this study provides a promising approach for the preparation of advanced DE composites with outstanding electro-actuated performance in low-field driving applications.

Photopolymerization-induced phase separation kinetics explored by intermittent irradiation

In this work, we explore the kinetics of the photopolymerization-induced phase separation (photo-PIPS) process and the interplay of mechanisms controlling the development of the microstructure in a photosensitive resin comprised of pentaerythritol tetraacrylate (PETA) and 2-ethylhexyl methacrylate (2-EHMA) monomers with polypropylene glycol (PPG, Mn = 4000 g/mol) linear polymer additive and diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO) photoinitiator. We control the kinetics of photopolymerization by interrupting the irradiation at various stages of the process and varying the light intensity. Evolution of the microstructure is monitored by transmittance testing and scanning electron microscopy (SEM) inspection of fractured surfaces that are exposed to methanol for the purpose of removing the phase-separated PPG content. The evolution of the network is monitored by real-time Fourier-transform infrared (FTIR) spectroscopy during irradiation and intermittent probing after the cessation of irradiation. Three mechanisms controlling the evolution of the microstructure are identified: phase separation, photoinitiator consumption, and microstructural refinement. Phase separation begins immediately after the onset of network development and leads to a rapid reduction of transmittance due to the formation of PPG-rich subdomains. Microstructural refinement takes place at later stages leading to a reduction of these subdomains, a gradual increase of the PPG concentration within subdomains and an associated increase of transmittance. TPO consumption takes place during irradiation and accounts, to a smaller extent, for the recovery of the transmittance. Interrupting the irradiation allows generation of materials with various degrees of conversion and sizes of phase-separated subdomains, which provides a new way to control material properties.

Synthesis, aging and antimicrobial tests of (di)acrylate composites

Abstract The synthesis and characteristics of composites based on bisphenol A diacrylate with the addition of 2-ethylhexyl acrylate, butyl acrylate, or methyl methacrylate were carried out. Benzethonium chloride and zinc oxide were used as special additives in amounts of 1, 2, and 5 % by weight of monomers. These are compounds that exhibit antimicrobial properties. The composites were produced by the UV polymerization method with the addition of Irgacure 651 as a photoinitiator. Aging and swelling tests were carried out in water, solutions of hydrochloric acid and sodium hydroxide, and acetone. To confirm the changes in the structure of the composites, ATR/FT-IR spectra were performed before and after the degradation process. The hardness of the composites was also tested. The antimicrobial properties against Escherichia coli, Staphylococcus aureus, Aspergillus niger, and Candida albicans were checked. The conducted study also showed the significant changes in the Cerrena unicolor fungus secretome caused by the presence of the composites.

Interplay of photopolymerization and phase separation kinetics and the resulting structure-property relationship of photocurable resins

In this work we develop thermoset materials with heterogeneous microstructures on sub-micron scales by photopolymerization-induced phase separation (photo-PIPS). To this end, we designed a photo-curable resin based on pentaerythritol tetraacrylate (PETA), an acrylate monomer, combined with 2-ethylhexyl methacrylate (2-EHMA), a methacrylate diluent. Polypropylene glycol (PPG) was used as a phase separation agent. Phase separation was monitored by reactive light transmittance using a custom-built light transmission apparatus and through dynamic mechanical analysis (DMA). The photopolymerization kinetics and the microstructure morphology were characterized using real-time Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), respectively. We observe double phase separation: PETA and 2-EHMA separate due to different reactivities, while PPG phase separates as the network develops due to immiscibility. A synergy is observed between the two processes: PPG phase separation leads to an enhanced separation of 2-EHMA. Phase separation leads to reduced transmittance due to scattering, which is primarily associated with the separation of 2-EHMA. Phase separation also causes the reduction of stiffness due to the formation of PPG subdomains. The kinetics is enhanced by increasing the PPG molecular weight and increasing the irradiation intensity.

Solventless Photopolymerizable Paper Coating Formulation for Packaging Applications

Nowadays, packaging applications require the use of advanced materials as well as production methods that have a low environmental impact. In this study, a solvent-free photopolymerizable paper coating was developed using two acrylic monomers (2-ethylhexyl acrylate and isobornyl methacrylate). A copolymer, with a molar ratio of 2-ethylhexyl acrylate/isobornyl methacrylate of 0.64/0.36, was prepared and used as the main component of the coating formulations (50 and 60 wt%). A mixture of the monomers with the same proportion was used as a reactive solvent, yielding formulations with 100% solids. The coated papers showed an increase in the pick-up values from 6.7 to 32 g/m2 depending on the formulation used and the number of coating layers (up to two). The coated papers maintained their mechanical properties and presented improved air barrier properties (Gurley's air resistivity of ≈25 s for the higher pick-up values). All the formulations promoted a significant increase in the paper's water contact angle (all higher than 120 °) and a remarkable decrease in their water absorption (Cobb values decrease from 108 to 11 g/m2). The results confirm the potential of these solventless formulations for fabricating hydrophobic papers with potential application in packaging, following a quick, effective, and more sustainable approach.

Cu(0)-RDRP of 2-hydroxyethyl methacrylate in a non-polar solvent enables rapid synthesis of high-molecular weight homopolymers and direct access to amphiphilic copolymers

2-Hydroxyethyl methacrylate (HEMA) is an important functional monomer affording (co)polymers with numerous applications in different fields. Nevertheless, we still lack a reliable polymerization method for the synthesis of well-defined, high-molecular weight (MW) HEMA homopolymers, as well as for controlled copolymerization of unprotected HEMA with lipophilic comonomers. Herein, we report that rapid and well-controlled (co)polymerization of HEMA can be achieved via metallic copper-mediated reversible-deactivation radical polymerization (Cu(0)-RDRP) in a non-polar solvent (1,4-dioxane) using a chlorine-based initiation/catalytic system. With purified HEMA monomer, this protocol affords very well-defined (Ɖ ≤ 1.26) HEMA homopolymers in an unprecedently wide range of molecular weights from 10,000 to 500,000. Conversely, the structurally analogous bromine-based initiation/catalytic system leads to an uncontrolled polymerization. The use of a non-polar solvent enables, for the first time, a direct access to low-dispersity HEMA-rich copolymers with non-polar comonomers, including highly lipophilic ones. This is demonstrated on the successful copolymerization of HEMA with an equimolar amount of 2-ethylhexyl methacrylate and of lauryl methacrylate, yielding well-defined amphiphilic copolymers at quantitative conversion. This work significantly expands the application scope of the HEMA monomer and demonstrates for the first time that Cu(0)-RDRP in a non-polar solvent is applicable also to comparatively polar monomers.

Forced Gradient Copolymer for Rational Design of Mussel-Inspired Adhesives and Dispersants.

In recent years, there has been considerable research into functional materials inspired by living things. Much attention has been paid to the development of adhesive materials that mimic the adhesive proteins secreted by a mussel's foot. These mussel-inspired materials have superior adhesiveness to various adherents owing to the non-covalent interactions of their polyphenolic moieties, e.g., hydrogen bonding, electrostatic interactions, and even hydrophobic interactions. Various factors significantly affect the adhesiveness of mussel-inspired polymers, such as the molecular weight, cross-linking density, and composition ratio of the components, as well as the chemical structure of the polyphenolic adhesive moieties, such as l-3,4-dihydroxyphenylalanine (l-Dopa). However, the contributions of the position and distribution of the adhesive moiety in mussel-inspired polymers are often underestimated. In the present study, we prepared a series of mussel-inspired alkyl methacrylate copolymers by controlling the position and distribution of the adhesive moiety, which are known as "forced gradient copolymers". We used a newly designed gallic-acid-bearing methacrylate (GMA) as the polyphenolic adhesive moiety and copolymerized it with 2-ethylhexyl methacrylate (EHMA). The resulting forced gradient adhesive copolymer of GMA and EHMA (poly(GMA-co-EHMA), Poly1) was subjected to adhesion and dispersion tests with an aluminum substrate and a BaTiO3 nanoparticle in organic solvents, respectively. In particular, this study aims to clarify how the monomer position and distribution of the adhesive moiety in the mussel-inspired polymer affect its adhesion and dispersion behavior on a flat metal oxide surface and spherical inorganic oxide surfaces of several tens of nanometers in diameter, respectively. Here, forced gradient copolymer Poly1 consisted of a homopolymer moiety of EHMA (Poly3) and a random copolymer moiety of EHMA and GMA (Poly4). The composition ratio of GMA and the molecular weight were kept constant among the Poly1 series. Simultaneous control of the molecular lengths of Poly3 and Poly4 allowed us to discuss the effects on the distribution of GMA in Poly1. Poly1 exhibited apparent distribution dependency with regard to the adhesiveness and the dispersibility of BaTiO3. Poly1 showed the highest adhesion strength when the composition ratio of GMA was approximately 9 mol% in the portion of the Poly4 segment. In contrast, the block copolymer consisting of the Poly3 segment and Poly4 segment with only adhesive moiety 1 showed the lowest viscosity for dispersion of BaTiO3 nanoparticles. These results indicate that copolymers with mussel-inspired adhesive motifs require the proper design of the monomer position and distribution in Poly1 according to the shape and characteristics of the adherend to maximize their functionality. This research will facilitate the rational design of bio-inspired adhesive materials derived from plants that outperform natural materials, and it will eventually contribute to a sustainable circular economy.

Structural Exploration of Polycationic Nanoparticles for siRNA Delivery.

RNA interference (RNAi) is a promising approach to the treatment of genetic diseases by the specific knockdown of target genes. Functional polymers are potential vehicles for the effective delivery of vulnerable small interfering RNA (siRNA), which is required for the broad application of RNAi-based therapeutics. The development of methods for the facile modulation of chemical structures of polymeric carriers and an elucidation of detailed delivery mechanisms remain important areas of research. In this paper, we synthesized a series of methacrylate-based polymers with controllable structures and narrow distributions by atom transfer radical polymerization using various combinations of cationic monomers (2-dimethylaminoethyl methacrylate, 2-diethylaminoethyl methacrylate, and 2-dibutylaminoethyl methacrylate) and hydrophobic monomers (2-butyl methacrylate (BMA), cyclohexyl methacrylate, and 2-ethylhexyl methacrylate). These polymers exhibited varying hydrophobicities, charge densities, and pKa values, enabling the discovery of effective carriers for siRNA by in vitro delivery assays. For the polymers with BMA segments, 50% of cationic segments were beneficial to the formation of siRNA nanoparticles (NPs) and the in vitro delivery of siRNA. The optimal ratio varied for different combinations of cationic and hydrophobic segments. In particular, 20k PMB 0.5, PME 0.5, and PEB 1.0 showed >75% luciferase knockdown. Efficacious delivery was dependent on high siRNA binding, the small size of NPs, and balanced hydrophobicity and charge density. Cellular uptake and endosomal escape experiments indicated that carboxybetaine modification of 20k PMB 0.5 did not remarkably affect the internalization of corresponding NPs after incubation for 6 h but significantly reduced the endosomal escape of NPs, which leads to the notable decrease in delivery efficacy of polymers. These results provide insights into the mechanism of polymer-based siRNA delivery and may inspire the development of novel polymeric carriers.

Copolymerization of Styrene with 2-Ethylhexyl Acrylate and 2-Ethylhexyl Methacrylate by Semibatch Emulsion Polymerization Using BlocBuilderMA as Macroinitiator

Copolymerization of Styrene with 2-Ethylhexyl Acrylate and 2-Ethylhexyl Methacrylate by Semibatch Emulsion Polymerization Using BlocBuilderMA as Macroinitiator

Molecular protectors: Superheroes for nanostructures

Molecular protectors: Superheroes for nanostructures

Foldable Glistening-Free Acrylic Intraocular Lens Biomaterials with Dual-Side Heterogeneous Surface Modification for Postoperative Endophthalmitis and Posterior Capsule Opacification Prophylaxis.

Hydrophobic acrylic intraocular lenses (IOLs) are widely used in cataract treatment for posterior capsule opacification (PCO) prophylaxis. However, undesired glistening and postoperative endophthalmitis are two major potential risks. Hence, a series of poly(2-phenoxyethyl methacrylate-co-2-phenoxyethyl acrylate-co-2-ethylhexyl methacrylate) (PPPE) acrylic IOL materials were synthesized for "glistening-free" optimization. The selected PPPE with 2% 2-ethylhexyl methacrylate showed excellent optical, foldable, and thermomechanical properties. The anterior surface of PPPE was coated with polydopamine followed by gentamycin conjugation (PDA/GS). It inhibited bacterial adhesion by 74% and decreased the biofilm thickness by 87%. In inflammatory mimicking conditions, bacterial proliferation was restrained, with acidic-dependent GS release behavior. The surface of PPPE toward the posterior capsule remained hydrophobic. It was conducive to human lens epithelial cell adhesion, collagen IV and fibronectin adsorption, and the following "sealed sandwich structure" formation. In summary, the PPPE with a dual-side heterogeneous surface displayed good application prospects in postoperative endophthalmitis and PCO prevention.

Preparation of photo-crosslinkable acrylic copolymer and its debonding property on silicon wafer

As silicon wafers become thinner and easier to warp, it is important to improve production efficiency of dies. In the wafer grinding and dicing process, photo-crosslinkable pressure sensitive adhesive (PSA) tapes are applied to fix the silicon wafer and greatly increase die yield. The PSA tapes must be peeled easily without any residues after UV light irradiation. Herein, a hydroxyl group containing copolymer was first synthesized from 2-ethylhexyl acrylate, methyl methacrylate, acrylic acid and hydroxyethyl acrylate monomers via free radical polymerization, followed by the introduction of methacrylate groups through the addition reaction of 2-isocyanatoethyl methacrylate with hydroxyl groups on side chain of copolymers. The photo-crosslinkable adhesive was then prepared by the mixing the copolymers with photoinitiator and aziridine crosslinker. Glass transition temperature (Tg) and storage modulus of the photo-crosslinked adhesives increased with UV irradiation time, which benefited the picking-up process. A digital microscope was used to observe the surface morphology of the debonded silicon wafers and excellent debonding effect occurred after 40 s UV irradiation.

Influence of monomer type, plasticizer content, and powder/liquid ratio on setting characteristics of acrylic permanent soft denture liners based on poly(ethyl methacrylate/butyl methacrylate) and acetyl tributyl citrate.

We evaluated the influence of monomer type, plasticizer content, and powder/liquid (P/L) ratio on the setting characteristics of light-cured acrylic permanent soft denture liners based on poly(ethyl methacrylate/butyl methacrylate). Two monomers, iso-butyl methacrylate (i-BMA) and 2-ethylhexyl methacrylate (2-EHMA), that contained various concentrations of the plasticizer acetyl tributyl citrate (ATBC) and trace amounts of the photo initiator and reducing agent were used. The P/L ratio was 1.0 or 1.2. The gelation time was measured using a controlled stress rheometer. Materials with i-BMA had shorter gelation times than those for materials with 2-EHMA. The gelation time increased exponentially with increasing plasticizer content. A higher P/L ratio led to a shorter gelation time. The effects of monomer type and plasticizer content were larger than that for the P/L ratio. These results show that 2-EHMA is a suitable monomer for soft denture liners and that the setting characteristics can be controlled via ATBC content.

Investigations of Polymethacrylate Tribochemical Films Using X-Ray Spectroscopy and Optical Profilometry

This study investigates the elemental composition and surface morphology of solid tribochemical films formed on steel surfaces. The reversible addition-fragmentation chain transfer (RAFT) method was used to synthesize nine different metal-free polymers, which were blended into commercial base oils. The polymers were either homopolymers of dodecyl methacrylate and ethylhexyl methacrylate or were co-polymers of these monomers with six polar monomers. After tribological testing at 100 °C using the ball-on-flat geometry, the resulting tribochemical films were imaged using scanning electron microscopy (SEM) and optical microscopy. The resulting tribochemical films have thicknesses around 50–100 nm. Two of the films corresponding to small (P1—imidazole-containing copolymer) and large (P3—less polar homopolymer) wear were cross-sectioned using focused ion beam (FIB) and analyzed for elemental composition using energy-dispersive X-Ray (EDX) mapping. Oxygen and nitrogen enrichment was observed, consistent with the relative chemical composition of the precursor polymers. Transmission electron microscopy (TEM) evidence suggests that at the worn surface, some organic elements penetrate or are mixed into the steel substrate giving an interlocking appearance. The two samples examined with TEM showed that P1 tribofilm is diffused or mixed with the steel substrate more so than P3, suggesting a stronger affinity and contact during tribofilm formation.

Scalable and facile synthesis of acetal covalent adaptable networks with readily adjustable properties

Covalent adaptable networks (CANs) were rapidly developed to address the recycle issue of thermosets; however, facile and scalable synthesis of CANs is still a challenge. Here, we report the preparation of the acetal-based CANs with commercially available raw materials by a one-pot method without solvent, which can achieve zero atom loss over the whole process. The CANs were synthesized through a radical copolymerization of styrene (or 2-ethylhexyl methacrylate) and 2-hydroxyethyl methacrylate and an addition reaction of the hydroxyl from 2-hydroxyethyl methacrylate and a divinyl ether in one pot. The CANs could be recycled by hot-press reprocessing, and could also be degraded and regenerated into networks to achieve closed-loop recycling. In addition, the thermal and mechanical properties could be readily regulated by changing the monomers for the preparation. This work provides a scalable method to prepare acetal-based CANs, which will shorten the scientific research of CANs to industrialization.

Control of Particle Size in the Self-Assembly of Amphiphilic Statistical Copolymers.

A range of amphiphilic statistical copolymers is synthesized where the hydrophilic component is either methacrylic acid (MAA) or 2-(dimethylamino)ethyl methacrylate (DMAEMA) and the hydrophobic component comprises methyl, ethyl, butyl, hexyl, or 2-ethylhexyl methacrylate, which provide a broad range of partition coefficients (log P). Small-angle X-ray scattering studies confirm that these amphiphilic copolymers self-assemble to form well-defined spherical nanoparticles in an aqueous solution, with more hydrophobic copolymers forming larger nanoparticles. Varying the nature of the alkyl substituent also influenced self-assembly with more hydrophobic comonomers producing larger nanoparticles at a given copolymer composition. A model based on particle surface charge density (PSC model) is used to describe the relationship between copolymer composition and nanoparticle size. This model assumes that the hydrophilic monomer is preferentially located at the particle surface and provides a good fit to all of the experimental data. More specifically, a linear relationship is observed between the surface area fraction covered by the hydrophilic comonomer required to achieve stabilization and the log P value for the hydrophobic comonomer. Contrast variation small-angle neutron scattering is used to study the internal structure of these nanoparticles. This technique indicates partial phase separation within the nanoparticles, with about half of the available hydrophilic comonomer repeat units being located at the surface and hydrophobic comonomer-rich cores. This information enables a refined PSC model to be developed, which indicates the same relationship between the surface area fraction of the hydrophilic comonomer and the log P of the hydrophobic comonomer repeat units for the anionic (MAA) and cationic (DMAEMA) comonomer systems. This study demonstrates how nanoparticle size can be readily controlled and predicted using relatively ill-defined statistical copolymers, making such systems a viable attractive alternative to diblock copolymer nanoparticles for a range of industrial applications.