1H MAS NMR Research Articles

Understanding the Wettability of C1N1 (Sub)Nanopores: Implications for Porous Carbonaceous Electrodes.

Understanding how water interacts with nanopores of carbonaceous electrodes is crucial for energy storage and conversion applications. A high surface area of carbonaceous materials does not necessarily need to translate to a high electrolyte-solid interface area. Herein, we study the interaction of water with nanoporous C1N1 materials to explain their very low specific capacitance in aqueous electrolytes despite their high surface area. Water was used to probe chemical environments, provided by pores of different sizes, in 1H MAS NMR experiments. We observe that regardless of their high hydrophilicity, only a negligible portion of water can enter the nanopores of C1N1, in contrast to a reference pure carbon material with a similar pore structure. The common paradigm that water easily enters hydrophilic pores does not apply to C1N1 nanopores below a few nanometers. Calorimetric and sorption experiments demonstrated strong water adsorption on the C1N1 surface, which restricts water mobility across the interface and impedes its penetration into the nanopores.

Understanding the Wettability of C1N1 (Sub)Nanopores: Implications for Porous Carbonaceous Electrodes

AbstractUnderstanding how water interacts with nanopores of carbonaceous electrodes is crucial for energy storage and conversion applications. A high surface area of carbonaceous materials does not necessarily need to translate to a high electrolyte‐solid interface area. Herein, we study the interaction of water with nanoporous C1N1 materials to explain their very low specific capacitance in aqueous electrolytes despite their high surface area. Water was used to probe chemical environments, provided by pores of different sizes, in 1H MAS NMR experiments. We observe that regardless of their high hydrophilicity, only a negligible portion of water can enter the nanopores of C1N1, in contrast to a reference pure carbon material with a similar pore structure. The common paradigm that water easily enters hydrophilic pores does not apply to C1N1 nanopores below a few nanometers. Calorimetric and sorption experiments demonstrated strong water adsorption on the C1N1 surface, which restricts water mobility across the interface and impedes its penetration into the nanopores.

Advanced Nuclear Magnetic Resonance, Fourier Transform–Infrared, Visible-NearInfrared and X-ray Diffraction Methods Used for Characterization of Organo-Mineral Fertilizers Based on Biosolids

Biosolids from stabilized sludge present a high fertilization potential, due to their rich content of nutrients and organic matter. The intrinsic and subtle properties of such fertilizers may greatly influence the fertilization efficiency. In this sense, the utility, advantages and limitations of advanced characterization methods, for the investigation of structural and dynamic properties at the microscopic scale of slightly different formulations of fertilizers were assessed. For that, three formulas of organo-mineral fertilizers based on biosolids (V1, V2 and V3), having at least 2% N, 2% P2O5, and 2% K2O, were characterized by advanced methods, such as 1H NMR relaxometry, 1H MAS and 13C CP-MAS NMR spectroscopy, 1H double-quantum NMR and FT-IR spectroscopy. Advanced structural characterization was performed using SEM, EDX and X-ray diffraction. Four dynamical components were identified in the NMR T2 distribution showing that the rigid component has a percentage larger than 90%, which explains the broad band of NMR spectra confirmed by the distributions of many components in residual dipolar coupling as were revealed by 1H DQ-NMR measurements. SEM and EDX measurements helped the identification of components from crystalline-like X-ray diffraction patterns. To evaluate the release properties of organo-mineral fertilizers, dynamic measurements of classical electric conductivity and pH were performed by placing 0.25 g of the formulas (V1, V2 and V3) in 200 mL of distilled water. The content of N and P were quantified using specific reactants, combined with VIS-nearIR spectroscopy. Two release mechanisms were observed and characterized. It was found that V3 presents the smallest release velocity but releases the largest number of fertilizers.

Catalytic benzylation of arenes using metal-ion modified HY zeolites for sustainable synthesis

Microporous zeolites are commonly employed as catalysts for the benzylation of arenes and benzyl alcohol. However, their catalytic efficiency is often compromised by diffusion limitations, particularly in reactions involving larger arenes. In this study, we developed metal-ion modified HY zeolites using Zn, Mg, and Ni as dopants and investigated their catalytic performance in the benzylation of a range of arenes, including toluene, benzene, mesitylene, p-xylene and with benzyl alcohol (BzOH). The structural and acidic properties of the modified HY zeolites were characterized using a combination of techniques including scanning electron microscopy (SEM), X-ray diffraction (XRD), N₂ adsorption–desorption isotherms, Fourier-transform infrared (FTIR) spectroscopy, ammonia temperature-programmed desorption (NH₃-TPD), and proton magic angle spinning nuclear magnetic resonance (1H MAS NMR) spectroscopy. The presence of catalytically active Brønsted acid sites (BAS) was detected by 1H MAS NMR spectroscopy and it was demonstrated that the HY zeolite's acidity is considerably modulated by the addition of metal ions. The catalytic evaluations indicated that the metal-ion modified HY zeolites exhibited superior activity compared to unmodified HY zeolite, with the catalytic performance following the order Zn/HY > Ni/HY > Mg/HY > HY for the benzylation of benzyl alcohol with mesitylene. Further investigation into the mechanism revealed that the synergistic effect of metal ions and acidity plays a crucial role in enhancing the accessibility of arenes to the surface catalytic sites and thereby improving catalytic performance. These findings underscore the importance of the metal-acidity synergy in optimizing the catalytic efficacy of modified HY zeolites for selective benzylation reactions.

Study on the effect and mechanism of support structure and characteristic on Ag-based catalysts for low-temperature selective catalytic oxidation of ammonia

Herein, the influence of support type and properties on the catalytic activity and selectivity of Ag-based NH3-SCO catalyst was studied through the evaluation of NH3-SCO performance, the physicochemical characterization of H2-TPR, NH3-TPD, N2 isothermal adsorption–desorption, XPR and XPS, and the mechanism study of 1H MAS NMR, In-situ DRIFTS and DFT calculations. Ag/nano-TiO2, Ag/Al2O3, and Ag/MnO2 all showed better NH3-SCO activity because of more abundant Brønsted and Lewis acid sites of Al2O3 and TiO2 and more actual Ag loading amount due to the larger specific surface area and suitable surface chemistry. The N2 selectivity of Ag/nano-TiO2 is significantly better, which may be due to the highly dispersed Ag species and the abundant Brønsted acid sites with higher N2 selectivity. The mechanism study showed that the terminal hydroxyl was the preferred consumption target of Ag species, and this consumption promoted the effective dispersion and stable anchoring of Ag on the TiO2 surface.

Stability under electron irradiation of some layered hydrated minerals

The structural damages caused to some layered hydrated minerals by 2.5 MeV electron irradiation using the SIRIUS platform were studied by powder X-Ray diffraction and, in some cases, by 1H MAS-NMR spectroscopy. It is clearly demonstrated that the radiation damages are distinguishable from the heating effects. It is shown that: i) in all cases electron irradiation leads to distortions of the unit cell and very limited volume expansion, compared to heating; ii) radiation damages increase with increasing the structural complexity of the mineral; iii) portlandite Ca(OH)2 and brucite Mg(OH)2 remain crystalline up to high doses (a few GGy), with appearance of stacking fault disorder especially in brucite; iv) brushite CaHPO4.2H2O and gypsum CaSO4.2H2O undergo a phase transformation of type amorphization for brushite involving the strongest intralayer H bond between the acidic proton and the phosphate tetrahedral, and decomposition for gypsum involving interlayer H bonds between water molecules.

The Nature of Structural Defects in ZIF-8 Revealed with 1H and 31P MAS NMR and X-Ray Absorption Spectroscopy.

The metal-organic frameworks (MOFs) attract interest as potential catalysts whose catalytic properties are driven by defects. Several methods have been proposed for the defects-inducing synthesis of MOFs. However, the active species formed on the defective sites remain elusive and uncharacterized, as the spectroscopic fingerprints of these species are hidden by the regular structure signals. In this work, we have performed the synthesis of ZIF-8 MOF with defect-inducing procedures using fully deuterated 2-methylimidazolate ligands to enhance the defective sites' visibility. By combining 1H and 31P MAS NMR spectroscopy and X-ray absorption spectroscopy, we have found evidence for the presence of different structural hydroxyl Zn-OH groups in the ZIF-8 materials. It is demonstrated that the ZIF-8 defect sites are represented by Zn-OH hydroxyl groups with the signals at 0.3 and -0.7 ppm in the 1H MAS NMR spectrum. These species are of basic nature and may be responsible for the catalytic activity of the ZIF-8 material.

The nature of structural defects in ZIF‐8 revealed with 1H and 31P MAS NMR and X‐ray absorption spectroscopy

The metal‐organic frameworks (MOFs) attract interest as potential catalysts whose catalytic properties are driven by defects. Several methods have been proposed for the defects‐inducing synthesis of MOFs. However, the active species formed on the defective sites remain elusive and uncharacterized, as the spectroscopic fingerprints of these species are hidden by the regular structure signals. In this work, we have performed the synthesis of ZIF‐8 MOF with defect‐inducing procedures using fully deuterated 2‐methylimidazolate ligands to enhance the defective sites' visibility. By combining 1H and 31P MAS NMR spectroscopy and X‐ray absorption spectroscopy, we have found evidence for the presence of different structural hydroxyl Zn–OH groups in the ZIF‐8 materials. It is demonstrated that the ZIF‐8 defect sites are represented by Zn–OH hydroxyl groups with the signals at 0.3 and –0.7 ppm in 1H MAS NMR spectrum. These species are of basic nature and may be responsible for the catalytic activity of the ZIF‐8 material.

A MAS-NMR analysis of 29Si, 27Al and 1H on the temperature's impact on geopolymer grouts derived from argillite and metakaolin

This study investigates how the curing temperature can enhance the reactivity of poorly reactive aluminosilicate source for geopolymer synthesis using a structural approach. The studied geopolymers are based on different aluminosilicate sources, a metakaolin and argillite, under varying curing temperatures (20 and 80°C). The impact of curing temperature on the reactivity of the two aluminosilicate sources and on the resulting consolidated materials was highlighted using pH value measurements, X-ray diffraction (XRD), and MAS-NMR for silicon (29Si), aluminum (27Al), and hydrogen (1H) nucleus. Metakaolin-based samples exhibited stable pH values, unvaried amorphous content, and structural consistency whatever the curing temperature. In contrast, argillite-based samples showed a significant drop in pH values (from 13 to 12) and a rise of amorphous content when cured at 80°C, indicating a reactivity change with temperatures. This was corroborated with MAS-NMR analysis, that highlighted a dissolution of the associated minerals such as illite and smectite. It was evidenced the presence of the geopolymer phase Q4(2Al) and Q4(3Al), in addition to two other networks based on silicon (Q4(1Al) and Q4(0Al)), and on aluminum Q4(4Al). The 1H MAS-NMR corroborated this finding by an increase of the bounded water (the band at 4.8 ppm) in the geopolymer network. All these data underline how temperature influences the reactivity of geopolymer materials, especially argillite-based samples by enhancing the dissolution of associated minerals (illite muscovite and smectite).

Thermal activation of kaolinite through potassium acetate intercalation: A structural and reactivity study

Calcined clays have emerged as a suitable alternative to partially replace conventional cement due to their high pozzolanic activity. This study explores a novel activation methodology for kaolinite, aiming to obtain metakaolin at lower temperatures than conventional thermal activation. This methodology involves a prior intercalation stage with potassium acetate (KAc) before thermal activation. The effectiveness of KAc intercalation was assessed through X-ray diffraction (XRD), indicating an intercalation ratio of approximately 90%. Several calcined temperatures were tested in accordance with the thermal behaviour analyzed through thermogravimetric analysis (TGA). Once calcined, the intercalated kaolinites exhibited enhanced reactivity compared to conventional calcined clays in the range between 400 °C to 550 °C, as demonstrated by modified Chapelle and Si/Al availability tests. A comprehensive structural characterization was conducted to facilitate a better understanding of the novel KAc-based metakaolin reactivity through various techniques (XRD, 27Al - 1H MAS NMR, and TGA). This focused on the crystalline changes in the kaolinite structure, the evolution of Al atoms conformation, and the OH behaviour at different thermal activation temperatures. Overall, this study highlights the potential of KAc intercalation as a strategy to obtain higher metakaolin content at lower temperatures than through conventional thermal treatments, offering insights into the development of its potential use as supplementary cementitious materials or alternative cementitious materials precursor.

Enhanced dehydroaromatization of methane with methanol on Mo-ZSM-5/ZSM-11 intergrown zeolite materials

Methane dehydroaromatization (MDA) represents an appealing route for the direct utilization of abundant methane resources. Currently, the major challenge of MDA reaction lies in the rapid catalyst deactivation via coke formation, hindering large-scale industrialization of the process. Herein we report an enhanced conversion route of MDA in the presence of methanol on Mo-based zeolite materials. Compared to regular ZSM-5, ZSM-11, and their mechanically mixed counterparts, Mo embedded in ZSM-5/ZSM-11 intergrown matrix exhibits higher methane conversion (16.0%) and aromatics selectivity (62.5%) while limiting coke production to 12.1% under the co-feeding of methane and methanol (nCH4/nCH3OH = 30). If no methanol addition, coke selectivity is up to 45.1% in MDA reaction. Additionally, hydrogen enriched syngas (nH2/nCO = 6) was obtained as a co-product of the methane and methanol co-aromatization. NH3-adsorbed 1H MAS NMR, Co2+ titrated UV-vis and Raman spectroscopy characterizations reveal that a proper amount of Brönsted acid sites and the binuclear Mo anchored on the Al pairs at the intersection cavity may account for the superior reaction performance of the intergrown zeolites. A catalytic mechanism was also proposed via 13CH3OH isotopic labeling tracer and in-situ13C solid-state NMR studies. Methanol is first decomposed into CO/H2, while CO is hydrogenated to CH4 and converted into CO2 via the water-gas shift reaction. Alternatively, methanol is converted into CO/CO2 through formate intermediates. Subsequently, CO2 reduces coke deposition via the reverse Boudart reaction, which improves the catalytic performance.

Ultrasensitive detection of trace Hg(Ⅱ) in acidic conditions using DMABR loaded on sepiolite: Function, application and mechanism studies

Fast and real-time detection of trace Hg(Ⅱ) by fluorescent probes under acidic conditions is urgently required due to the high toxicity and accessibility to creatures and human being. However, fluorescent probes for Hg(Ⅱ) detection in environmental samples are rarely reported due to the protonation potential of acidic mercury sources. In this study, the SD probe was developed by 5-(p-dimethylaminobenzylidene) rhodanine (DMABR) loaded on sepiolite by hydrothermal treatment, and showed excellent Hg(Ⅱ) detection performances for mercury sources at pH 4–10 due to buffering ability of the hyperconjugated lactam rings. Sepiolite functioned as the support skeleton to decrease intermolecular transition, and thus increased the sensitivity. At pH 4, the SD probe showed high selectivity and sensitivity for Hg(Ⅱ) among various species, with low LOD and binding constant of 4.78 × 10−9 M and 1.34 × 106 M−1, respectively. Through DFT calculations, MAS 1H NMR and 2D-COS analysis, the detection mechanism was demonstrated as SN1 substitution of the spontaneous leaving H on amino groups in the transient state during tautomeric equilibrium, rather than the expected high-affinity sulphydryl. Additionally, the SD probe exhibited promising potential in quantifying water-soluble and bioavailable Hg(Ⅱ) in acidic polluted soil and water samples. Moreover, real-time detection was realized by paper-based strips.

Effect of Co-Adsorbed Guest Adsorbates on the Separation of Ethylene/Ethane Mixtures on Metal-Organic Frameworks with Open Metal Sites.

Direct determination of the equilibrium adsorption and spectroscopic observation of adsorbent-adsorbate interaction is crucial to evaluate the olefin/paraffin separation performance of porous adsorbents. However, the experimental characterization of competitive adsorption of various adsorbates at atomic-molecular level in the purification of multicomponent gas mixtures is challenging and rarely conducted. Herein, solid-state NMR spectroscopy is employed to examine the effect of co-adsorbed guest adsorbates on the separation of ethylene/ethane mixtures on Mg-MOF-74, Zn-MOF-74 and UTSA-74. 1H MAS NMR facilitates the determination of equilibrium uptake and adsorption selectivity of ethylene/ethane in ternary mixtures. The co-adsorption of H2O and CO2 significantly leads to the degradation of ethylene uptake and ethylene/ethane selectivity. The detailed host-guest and guest-guest interactions are unraveled by 2D 1H-1H spin diffusion homo-nuclear correlation and static 25Mg NMR experiments. The experimental results verify H2O coordinated on open metal sites can supply a new adsorption site for ethylene and ethane. The effects of guest adsorbates on the adsorption capacity and adsorption selectivity of ethylene/ethane mixtures are in the following order: H2O>CO2>O2. This work provides a direct approach for exploring the equilibrium adsorption and detailed separation mechanism of multicomponent gas mixtures using MOFs adsorbents.

Tackling the challenge of efficient VOCs removal across varied molecular sizes over zeolite adsorbent under humid conditions

Efficient removal of volatile organic compounds (VOCs) with different molecular sizes over a single zeolite remains a great challenge, especially under humid conditions. Here, we introduced an innovative base leaching strategy to construct hierarchical pores within high-silica MFI zeolite on premise of maintaining a similar high micropore volume. The key points were the introduction of Al3+ and B3+ as pore directing agents into the base solution and meticulous regulation of the acid washing process. Because of the introduction of mesopores, the adsorption capacities for m-xylene increased by 16.1 times compared to that on conventional MFI adsorbent. Meanwhile, it exhibited comparable adsorption capacities for smaller VOCs, including dichloromethane and toluene. The adsorption capacities for ethanol showed a notable increase, accompanied by a decrease in the desorption temperature. This was attributed to the generation of additional silanol adsorption sites, as confirmed by 1H MAS NMR and in situ FT-IR spectra. Moreover, the optimal adsorbent presented good regeneration performance throughout the four dynamic adsorption–desorption cycling tests for all VOCs.

β-Phase Yb5Sb3Hx: Magnetic and Thermoelectric Properties Traversing from an Electride to a Semiconductor.

An electride is a compound that contains a localized electron in an empty crystallographic site. This class of materials has a wide range of applications, including superconductivity, batteries, photonics, and catalysis. Both polymorphs of Yb5Sb3 (the orthorhombic Ca5Sb3F structure type (β phase) and hexagonal Mn5Si3 structure type (α phase)) are known to be electrides with electrons localized in 0D tetrahedral cavities and 1D octahedral chains, respectively. In the case of the orthorhombic β phase, an interstitial H can occupy the 0D tetrahedral cavity, accepting the anionic electron that would otherwise occupy the site, providing the formula of Yb5Sb3Hx. DFT computations show that the hexagonal structure is energetically favored without hydrogen and that the orthorhombic structure is more stable with hydrogen. Polycrystalline samples of orthorhombic β phase Yb5Sb3Hx (x = 0.25, 0.50, 0.75, 1.0) were synthesized, and both PXRD lattice parameters and 1H MAS NMR were used to characterize H composition. Magnetic and electronic transport properties were measured to characterize the transition from the electride (semimetal) to the semiconductor. Magnetic susceptibility measurements indicate a magnetic moment that can be interpreted as resulting from either the localized antiferromagnetically coupled electride or the presence of a small amount of Yb3+. At lower H content (x = 0.25, 0.50), a low charge carrier mobility consistent with localized electride states is observed. In contrast, at higher H content (x = 0.75, 1.0), a high charge carrier mobility is consistent with free electrons in a semiconductor. All compositions show low thermal conductivity, suggesting a potentially promising thermoelectric material if charge carrier concentration can be fine-tuned. This work provides an understanding of the structure and electronic properties of the electride and semiconductor, Yb5Sb3Hx, and opens the door to the interstitial design of electrides to tune thermoelectric properties.

Influence of Acid‐Base Characteristics of Different Structural‐Type Zeolites (FER, MFI, FAU, BEA) on Their Activity and Selectivity in Isobutanol Dehydration

AbstractThe different structural‐type zeolites (FER, MFI, FAU, BEA) are investigated as catalysts in (bio)isobutanol conversion into linear butenes. The zeolites’ structure and morphology are confirmed by XRD, N2 (77 K) ad(de)sorption, SEM, EDX, XPS, and 27Al, 29Si, 1H MAS NMR, 1H‐29Si CP MAS NMR. The nature and strength of acid‐base sites are determined by FTIR spectroscopy of adsorbed pyridine, potentiometric titration, and TPD of NH3/CO2/H2O with MS control. The acid‐base properties of the zeolites′ surfaces influence their catalytic properties in the target process. The higher selectivity towards linear butene isomers achieved over FER and MFI can be explained by the high strength and density of Brønsted acid sites (over 90 % of the total surface acidity). MFI might be regarded as a potential material for the creation of novel catalysts for isobutanol conversion into linear butenes at moderate temperatures (448–473 K) since it offers greater operating stability throughout the process.

Synthesis and Crystal Structures of Two Crystalline Silicic Acids: Hydrated H-Apophyllite, H16Si16O40 • 8–10 H2O and H-Carletonite, H32Si64O144

Hydrated H-Apophyllite (HH-Apo) and H-carletonite (H-Car) were synthesized at 0 °C by leaching an apophyllite and a carletonite single crystal in a large surplus of 1.2 molar hydrochloric acid. The XRD powder patterns of HH-Apo and H-Car were indexed with space group symmetries of P4/ncc and I4/mcm and lattice parameters of a = 8.4872(2) Å, c = 16.8684(8) Å and a = 13.8972(3) Å, c = 20.4677(21) Å, respectively. The crystal structures were solved based on model building of the structures of the precursors and a physico-chemical characterization. Rietveld structure refinements confirmed the structure models. HH-Apo and H-Car are among the very few crystalline silicic acids whose structures have been determined and confirmed based on a structure refinement. The structure of HH-Apo contains thin silicate monolayers that can be regarded as constructed by rings of interconnected [SiO3OH] tetrahedra which form a puckered silicate layer. A sheet of water molecules is intercalated between the silicate layers. There are no direct hydrogen bonds between the silanol groups, but there are hydrogen bonds of different strengths between the terminal O atoms of the silicate layers and the intercalated water molecules. The 1H MAS NMR spectrum presents a strong signal at 4.9 ppm related to the aforementioned bonds and interactions between the water molecules, as well as a small signal at 22.5 ppm corresponding to an extremely strong hydrogen bond with d(O...O) ≈ 2.2 Å. The structure of H-Car is free of structural water and consists exclusively of microporous silicate double-layers with 4-connected [SiO4] and 3-connected [SiO3OH] tetrahedra in a ratio of 1:1 and a thickness of 9.2 Å. Neighboring layers are connected to each other by medium–strong hydrogen bonds with O...O distances of 2.56 Å. The structure of HH-Apo decays within several hours while H-Car is stable. A topotactic condensation reaction applied to H-Car forms an irregularly condensed silicate which still contains the layers in a distorted form as building blocks.

Incorporation mechanisms and infrared absorption coefficients of water in MgSiO3 orthoenstatite clarified via comprehensive NMR and vibrational spectroscopic measurements, and first-principles calculations

We performed 1H and 29Si NMR and infrared measurements, and first-principles calculations to clarify the nature of OH defects in MgSiO3 orthoenstatite. An orthoenstatite sample synthesized at 7 GPa and 1200 °C from a composition of MgSiO3 + 0.1 wt% H2O yielded two 1H MAS NMR peaks near 5.9 and 7.6 ppm that are correlated in 2D NMR spectra, and two infrared bands near 3361 and 3066 cm− 1 that correspond to the previously reported A3 and A4 bands. The first-principles calculations confirmed that they are due to a pair of protons in a Mg (M2) vacancy. The previously reported A1 and A2 infrared bands near 3687 and 3592 cm− 1 for orthoenstatite synthesized at low silica activities were confirmed to arise from four protons in a SiB vacancy. The latter is predicted to give two additional OH stretching bands associated with two strongly hydrogen-bonded O3b-H bonds with frequencies below the spectral range reported thus far. The previously reported infrared absorption coefficients were thus revised to account for the undetected bands. 1H NMR may be used to quantitatively detect all four protons (expected at 1–12 ppm). Other mantle minerals should also be examined for potentially overlooked OH defects with strong hydrogen bonding.

High-electrophilic (SiO)2Nb(OH)(=O) sites confined in silanol defects over Nb-Beta zeolite for efficient cyclic alkene epoxidation reactions

Dealuminated Beta zeolite has a large amount of silanol defects on its interface, which provides an ideal place for embedding metal species and creating metal active sites in a confined microenvironment. The confined metal sites as well as their surroundings are closely related to the reactant activation and transient state achievement. Hence, unraveling the confined metal sites is of great significance for the catalytic reaction process. Herein, niobium species were incorporated into the silanol defects over dealuminated Beta zeolite with a facile dry impregnation method, co-grinding the niobium precursor with dealuminated Beta zeolite support. The successful incorporation of niobium into the silanol defects for 30Nb-Beta zeolite was verified by DRIFT, 1H MAS NMR, UV–Vis and UV-Raman characterizations. XAS characterization and DFT calculations further disclosed that the confined Nb species existed as (SiO)2Nb(OH)(=O), containing two Si−O−Nb bonds, one Nb=O bond as well as one Nb−OH bond. The synthesized 30Nb-Beta zeolite catalyst displayed a superior cyclohexene conversion of 51.1%, cyclohexene oxide selectivity of 83.1% as well as TOF value of 188.2 h−1 ascribed to the inherent electrophilicity of Nb(V) for confined (SiO)2Nb(OH)(=O) species as well as the low oxygen transfer energy barrier for NbV−OOH species. Furthermore, the prepared 30Nb-Beta zeolite can be effectively employed to other cyclic alkene epoxidation reactions.

Zinc Oxide Nanoclusters Encapsulated in MFI Zeolite as a Highly Stable Adsorbent for the Ultradeep Removal of Hydrogen Sulfide.

Often, trace impurities in a feed stream will cause failures in industrial applications. The efficient removal of such a trace impurity from industrial steams, however, is a daunting challenge due to the extremely small driving force for mass transfer. The issue lies in an activity-stability dilemma, that is, an ultrafine adsorbent that offers a high exposure of active sites is favorable for capturing species of a low concentration, but free-standing adsorptive species are susceptible to rapidly aggregating in working conditions, thus losing their intrinsic high activity. Confining ultrafine adsorbents in a porous matrix is a feasible solution to address this activity-stability dilemma. We herein demonstrate a proof of concept by encapsulating ZnO nanoclusters into a pure-silica MFI zeolite (ZnO@silicalite-1) for the ultradeep removal of H2S, a critical need in the purification of hydrogen for fuel cells. The Zn species and their interaction with silicalite-1 were thoroughly investigated by a collection of characterization techniques such as HADDF-STEM, UV-visible spectroscopy, DRIFTS, and 1H MAS NMR. The results show that the zeolite offers rich silanol defects, which enable the guest nanoclusters to be highly dispersed and anchored in the silicious matrix. The nanoclusters are present in two forms, Zn(OH)+ and ZnO, depending on the varying degrees of interaction with the silanol defects. The ultrafine nanoclusters exhibit an excellent desulfurization performance in terms of the adsorption rate and utilization. Furthermore, the ZnO@silicalite-1 adsorbents are remarkably stable against sintering at high temperatures, thus maintaining a high activity in multiple adsorption-regeneration cycles. The results demonstrate that the encapsulation of active metal oxide species into zeolite is a promising strategy to develop fast responsive and highly stable adsorbents for the ultradeep removal of trace impurities.