Charge Transfer State Research Articles

Direct visualization of the charge transfer state dynamics in dilute-donor organic photovoltaic blends.

The interconversion dynamics between charge transfer state charges (CTCs) and separated charges (SCs) is still an unresolved issue in the field of organic photovoltaics. Here, a transient absorption spectroscopy (TAS) study of a thermally evaporated small-molecule:fullerene system (α6T:C60) in different morphologies (dilute intermixed and phase separated) is presented. Spectral decomposition reveals two charge species with distinct absorption characteristics and different dynamics. Using time-dependent density functional theory, these species are identified as CTCs and SCs, where the spectral differences arise from broken symmetry in the charge transfer state that turns forbidden transitions into allowed ones. Based on this assignment, a kinetic model is formulated allowing the characterization of the charge generation, separation, and recombination mechanisms. We find that SCs are either formed directly from excitons within a few picoseconds or more slowly (~30-80 ps) from reversible splitting of CTCs. These findings constitute the first unambiguous observation of spectrally resolved CTCs and SCs.

From Molecules to Devices: A Multiscale Approach to Evaluating Organic Photovoltaics.

Due to their efficient molecular design, nonfullerene acceptors (NFAs) have significantly advanced organic photovoltaics (OPVs). However, the lack of models to screen and evaluate candidate NFAs based on the resulting device performance has impeded the rapid development of high-performance molecules. This work introduces a computational framework utilizing a kinetic Monte Carlo (kMC) model to derive device parameters from molecular properties computed through first principles. By analyzing the quantum chemical properties of diverse dimeric conformers, we estimate the relative probabilities of microscopic processes such as charge separation, recombination, and transport along with charge transfer state formation in the active layer of OPVs. These probabilities set up a random walk of charge carriers in a grid with disordered molecular sites, allowing us to track their average behavior and calculate key device parameters. Our model consistently predicts measured device parameters, including the short-circuit current and open-circuit voltage, for OPVs with diverse NFAs with high accuracy. Additionally, we applied the model to evaluate donor-acceptor combinations of known compounds and newly designed NFA molecules, identifying high-performing pairs. This model offers a computationally efficient approach for designing novel NFA molecules and optimizing the OPV performance.

Unraveling the Mechanisms of the Formations and Transformations of Metal-Ligand Charge Transfer States in [Ru(tpy)2]2+*: Consequences of Jahn-Teller Conical Intersections and the Pseudo-Jahn-Teller Effect.

This work investigates Jahn-Teller conical intersections (CoIns) and the pseudo-Jahn-Teller effect on the formations and transformations of the low-lying singlet metal-ligand charge transfer (1MLCT) excited states during the ultrafast evolution process of photoexcited [Ru(tpy)2]2+* (tpy = 2,2':6',2″-terpyridine). Longuet-Higgins' geometric phase analyses indicate that the potential energy surface (PES) crossing between charge transfer states 1MLCT1 and 1MLCT2 is a CoIn, originating from the change in diabatic Hamiltonian matrix elements around the CoIn. Moreover, an E⊗(b1 + b2) Jahn-Teller distortion can occur around the Franck-Condon and minimal energy CoIn (MECI) configurations, causing the molecule to distort spontaneously from the high-symmetry D2d configuration to C2v symmetry configurations that are close to it. Furthermore, the pseudo-Jahn-Teller effect can cause the molecule to distort further from C2v to C1 geometries since the former is a second-order saddle point on the whole dimensional PES but the latter is a true minimum. Eight minima in total are symmetrically distributed around the MECI. These minima are connected by the interligand electron transfer, the charge transfer, and the butterfly-like conformational inversion reactions, all of which have extremely small energy barriers.

Unexpected Photodriven Linker-to-Node Hole Transfer in a Zirconium-Based Metal-Organic Framework.

Zr6(μ3-O)4(μ3-OH)4 node cores are indispensable building blocks for almost all zirconium-based metal-organic frameworks. Consistent with the insulating nature of zirconia, they are generally considered electronically inert. Contrasting this viewpoint, we present spectral measurements and calculations indicating that emission from photoexcited NU-601, a six-connected Zr-based MOF, comes from both linker-centric locally excited and linker-to-node charge-transfer (CT) states. The CT state originates from a hole transfer process enabled by favorable energy alignment of the HOMOs of the node and linker. This alignment can be manipulated by changing the pH of the medium, which alters the protonation state of multiple oxy groups on the Zr-node. Thus, the acid-base chemistry of the node has a direct effect on the photophysics of the MOF following linker-localized electronic excitation. These new findings open opportunities to understand and exploit, for energy conversion, unconventional mechanisms of exciton formation and transport in MOFs.

Distance-dependent symmetry-breaking charge transfer in 9,10-bis(phenylethynyl)anthracene dimers.

To investigate the effect of the through-bond coupling strength on the symmetry-breaking charge separation (SB-CS) dynamics and mechanism, three 9,10-bis((4-hexylphenyl)ethynyl)anthracene dimers with varying distances, viz., a single-bond linked dimer (0-dimer), a phenylene linked dimer (1-dimer) and a para-biphenylene linked dimer (2-dimer), were synthesized and studied systematically using steady-state and transient spectroscopy. Steady-state absorption spectra revealed that the electronic coupling strength decreased gradually with the increase of the inter-chromophore distance, and the transition of S0→S1 includes the dark charge transfer (CT) excitation. fs-TA spectra demonstrated that SB-CS could be conducted in both weakly and highly polar solvents for 0-dimer, but the SB-CS dynamics has a significant difference. In weakly polar solvents, SB-CS only produces the partial CT (PCT) state, but it could generate the CT state via the PCT state in highly polar solvent. In comparison, SB-CS is only proceeded in highly polar solvents in 1-dimer and 2-dimer to produce the CT state directly. These results demonstrate that the SB-CS dynamics is strongly dependent on the inter-chromophore electronic coupling, and the relatively strong electronic coupling is crucial for the occurrence of SB-CS in weakly polar environment that is commonly presented in photoelectric devices.

Deciphering the Influence of Zwitterionic Surfactants on Pluronic Co-assemblies: A Synergistic Odyssey through Spectroscopic, Microscopic, and Scattering Techniques.

Fundamental investigations into the photophysical properties and microenvironmental features of pluronic-zwitterionic surfactant mixed assemblies are essential for advancing our understanding of molecular interactions at the nanoscale, setting the stage for innovative solutions in drug delivery, diagnostics, and other applications of pluronic-zwitterionic surfactant assemblies. This investigation explores the intricate photophysics of pluronic-zwitterionic surfactant mixed assemblies, utilizing the twisted intramolecular charge transfer state forming styryl dye trans-2-[(4-dimethylamino) styryl] benzothiazole as a probe. By comparing the behaviors of two distinct poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) block copolymers with block composition of (PEO)132-(PPO)50-(PEO)132 [F108] and (PEO)100-(PPO)65-(PEO)100 [F127] at concentrations of 5 and 10 wt %, this study systematically examines the impact of the addition of zwitterionic surfactants. Through a comprehensive set of analytical techniques, including UV-visible absorption, steady-state emission, and time-resolved fluorescence emission studies, significant alterations in the emission spectra and quantum yields were observed upon the addition of zwitterionic surfactants. These modifications suggest a dynamic equilibrium for the transitioning of dye molecules between various microenvironments within the assemblies. Additionally, dynamic light scattering, zeta potential (ζ), nuclear Overhauser effect spectroscopy, small-angle neutron scattering, cryogenic transmission electron microscopy, field emission scanning electron microscopy, and fluorescence lifetime imaging microscopy analyses have shed light on the substantial impact of surfactant incorporation on the structural properties of assemblies.

Rigid and planar π-conjugated molecules leading to long-lived intramolecular charge-transfer states exhibiting thermally activated delayed fluorescence

Intramolecular charge transfer (ICT) occurs when photoexcitation causes electron transfer from an electron donor to an electron acceptor within the same molecule and is usually stabilized by decoupling of the donor and acceptor through an orthogonal twist between them. Thermally activated delayed fluorescence (TADF) exploits such twisted ICT states to harvest triplet excitons in OLEDs. However, the highly twisted conformation of TADF molecules results in limited device lifetimes. Rigid molecules offer increased stability, yet their typical planarity and π-conjugated structures impedes ICT. Herein, we achieve dispersion-free triplet harvesting using fused indolocarbazole-phthalimide molecules that have remarkably stable co-planar ICT states, yielding blue/green-TADF with good photoluminescence quantum yield and small singlet-triplet energy gap < 50 meV. ICT formation is dictated by the bonding connectivity and excited-state conjugation breaking between the donor and acceptor fragments, that stabilises the planar ICT excited state, revealing a new criterion for designing efficient TADF materials.

Sensitive Self-Driven Single-Component Organic Photodetector Based on Vapor-Deposited Small Molecules.

Typically, organic solar cells (OSCs) and photodetectors (OPDs) comprise an electron donating and accepting material to facilitate efficient charge carrier generation. This approach has proven successful in achieving high-performance devices but has several drawbacks for upscaling and stability. This study presents a fully vacuum-deposited single-component OPD, employing the neat oligothiophene derivative DCV2-5T in the photoactive layer. Free charge carriers are generated with an internal quantum efficiency of 20 % at zero bias. By optimizing the device structure, a very low dark current of 3.4 · 10-11Acm-2 at -0.1V is achieved, comparable to the dark current of state-of-the-art bulk heterojunction OPDs. This optimization results in specific detectivities of 1· 1013Jones (based on noise measurements), accompanied by a fast photoresponse (f-3dB = 200kHz) and a broad linear dynamic range (>150dB). Ultrafast transient absorption spectroscopy unveils that charge carriers are already formed at very short time scales (<1ps). The surprisingly efficient bulk charge generation mechanism is attributed to a strong electronic coupling of the molecular exciton and charge transfer states. This work demonstrates the very high performance of single-component OPDs and proves that this novel device design is a successful strategy for highly efficient, morphological stable and easily manufacturable devices.

Enabling Visible Light Sensitization of YbIII, NdIII and ErIII in Dimeric LnIII/GaIII Metallacrowns through Functionalization with RuII Complexes for NIR‐II Multiplex Imaging

AbstractMultiplex imaging in the second near‐infrared window (NIR‐II, 1000–1700 nm) provides exciting opportunities for more precise understanding of biological processes and more accurate diagnosis of diseases by enabling real‐time acquisition of images with improved contrast and spatial resolution in deeper tissues. Today, the number of imaging agents suitable for this modality remains very scarce. In this work, we have synthesized and fully characterized, including theoretical calculations, a series of dimeric LnIII/GaIII metallacrowns bearing RuII polypyridyl complexes, LnRu‐3 (Ln=YIII, YbIII, NdIII, ErIII). Relaxed structures of YRu‐3 in the ground and the excited electronic states have been calculated using dispersion‐corrected density functional theory methods. Detailed photophysical studies of LnRu‐3 have demonstrated that characteristic emission signals of YbIII, NdIII and ErIII in the NIR‐II range can be sensitized upon excitation in the visible range through RuII‐centered metal‐to‐ligand charge transfer (MLCT) states. We have also showed that these NIR‐II signals are unambiguously detected in an imaging experiment using capillaries and biological tissue‐mimicking phantoms. This work opens unprecedented perspectives for NIR‐II multiplex imaging using LnIII‐based molecular compounds.

Impurities in Arylboronic Esters Induce Persistent Afterglow.

Several recent reports suggest that arylboronic esters can exhibit room temperature phosphorescence (RTP), an optical property that is desirable for applications in security printing, oxygen sensing, and bioimaging. These findings challenged the fundamental notion that heavy elements or changes in orbital symmetry were required for intersystem crossing to occur in organic compounds. As we had not observed long afterglow in the many arylboronic esters we had synthesized over many years, we suspected that the RTP observed in these systems had a simpler explanation: the materials reported were impure. Herein, we synthesized 12 arylboronic esters that were previously reported to show RTP, and carefully purified them by column chromatography, recrystallization, and sublimation. We re-examined their photophysical properties alongside single-crystal X-ray diffraction analysis and detailed theoretical studies. While 4 of the 12 compounds showed long afterglows as crude products, none of them showed persistent RTP after careful purification. We also successfully isolated the impurity 4-amino-3,5-bis(pinacolatoboryl)benzonitrile (2), identifying it as the impurity responsible for inducing delayed fluorescence in 3,5-bis(pinacolatoboryl)benzonitrile (1). Doping 1 with 1.0 mol % 2 led to a persistent afterglow with a lifetime of 67 ms, which is mediated by a dimer charge transfer state. Our findings call for a re-examination of previous studies reporting RTP from arylboronic esters, highlight the importance of careful purification in photophysical research, and provide a practical strategy for designing organic materials with a long afterglow.

Introducing electron-rich thiophene bridges in hot exciton emitter for efficient non-Doped near-infrared OLEDs with low turn-on voltages

The development of near-infrared (NIR) luminescent materials featuring high photoluminescence quantum yield (ΦPL) at aggregated state is of great significance for achieving highly efficient non-doped organic light-emitting diodes (OLEDs) but remains formidable challenging. Herein, a design strategy of introducing electron-rich thiophene groups between electron acceptor and donor is proposed for efficient NIR luminescent materials, and a tailored D-π-A-π-D type emitter, namely, 4,4′-(benzo[c][1,2,5]thiadiazole-4,7-diylbis(thiophene-5,2-diyl))bis(N,N-diphenylaniline) (TPATBT), is designed and prepared. The photophysical investigation and density functional theory analysis disclose that TPATBT is a hot exciton emitter feature with hybridized local and charge-transfer state. Additionally, TPATBT demonstrates aggregation-induced emission characteristic, prefers high thermal stability, and exhibits a strong emission at 692 nm with a decent ΦPL of 20 % in the neat film. The non-doped device based on TPATBT neat film presents a maximum external quantum efficiency (ηext,max) of 1.22 % with electroluminescence peak at 718n m. Moreover, we first try to use interlayer sensitization to sensitize non-doped devices, which achieves better ηext,max of 1.34 % with low turn-on voltage of 3.2 V. The proposed molecular design strategy in this work is promising for exploring robust NIR luminescent materials for high-performance OLEDs.

A comprehensive Investigation of Donor-Acceptor anthraquinone derivatives as Versatile and efficient photosensitizers for Dye-Sensitized solar cells

A new metal-free anthraquinone donor–acceptor-π-anchor (D-A-π-A) design was developed using unsymmetrically substituted anthraquinone (ATQ) derivatives functionalized with bromine (Br), diphenylamine (DPA), indoline (Ind), BrATQBzOH, DPAATQBzOH, and IndATQBzOH. The synthesised compounds, functionalized with an anchor group (ethynylbenzoic acid), were evaluated in practical dye-sensitised solar cell, DSSC, devices with the aiming to improve electron injection efficiency. Their properties and applicability were analysed and rationalised based on their energy levels and parameters derived from the current–voltage (I-V) curve analysis in real devices. Femtosecond transient absorption measurements of the sensitiser IndATQBzOH with TiO2 revealed distinct excited state dynamics and charge transfer properties, highlighting the influence of the semiconductor interface. In addition, Density Functional Theory (DFT) and Time-Dependent DFT (TDDFT) electronic quantum calculations were performed, which revealed that the new anthraquinone-based dyes exhibit optimal coplanarity for efficient electron transfer, with their LUMO and HOMO energy levels facilitating electron injection into TiO2. In contrast to the low efficiencies found for previous anthraquinone derivatives, with maximum photocurrent efficiencies (PCE) below 0.2%, 9,10-anthraquinone derivatives were used as acceptors attached to suitable donors (DPA or Ind), and PCE above 1% were obtained.

Reducing Non-Radiative Energy Losses in Non-fullerene Organic Solar Cells.

With the rapid advancement of non-fullerene acceptors (NFAs), the power conversion efficiency (PCE) of organic solar cells (OSCs) has surpassed the 20% threshold, highlighting their considerable potential as next-generation energy conversion devices. In comparison to inorganic or perovskite solar cells, the open-circuit voltage (Voc) of OSCs is constrained by substantial non-radiative energy losses (ΔEnr), leading to values notably below those anticipated by the Shockley-Queisser limit. In OSCs, non-radiative energy losses are intimately associated with the electroluminescent quantum efficiency (EQEEL) of charge transfer states, which is in turn directly affected by the photoluminescence quantum yield (PLQY) of acceptor materials. Consequently, enhancing the PLQY of low-bandgap acceptor materials has emerged as a pivotal strategy to effectively mitigate ΔEnr. This review article delves into the intrinsic correlation between molecular structure and PLQY from the vantage point of acceptor material design. It further explores methodologies for designing acceptor materials exhibiting high PLQY, with the ultimate goal of realizing OSCs that combine high efficiency with minimal ΔEnr.

Charge-transfer dipole low-frequency vibronic excitation at single-molecular scale.

Scanning tunneling microscopy (STM) vibronic spectroscopy, which has provided submolecular insights into electron-vibration (vibronic) coupling, faces challenges when probing the pivotal low-frequency vibronic excitations. Because of eigenstate broadening on solid substrates, resolving low-frequency vibronic states demands strong decoupling. This work designs a type II band alignment in STM junction to achieve effective charge-transfer state decoupling. This strategy enables the successful identification of the lowest-frequency Hg(ω1) (Raman-active Hg mode) vibronic excitation within single C60 molecules, which, despite being notably pronounced in electron transport of C60 single-molecule transistors, has remained hidden at submolecular level. Our results show that the observed Hg(ω1) excitation is "anchored" to all molecules, irrespective of local geometry, challenging common understanding of structural definition of vibronic excitation governed by Franck-Condon principle. Density functional theory calculations reveal existence of molecule-substrate interfacial charge-transfer dipole, which, although overlooked previously, drives the dominant Hg(ω1) excitation. This charge-transfer dipole is not specific but must be general at interfaces, influencing vibronic coupling in charge transport.

Mono- and Bichromophores Formed from Perylene Monoimide Diesters: Competition between Intramolecular Charge Transfer and Intermolecular Singlet Exciton Fission.

Perylene monoimide diesters and the corresponding phenyl-linked bichromophores are strongly fluorescent in dilute solution with minimal triplet population after relaxation of the initial Franck-Condon state. The monomer forms nonemissive face-to-face dimers in solution, wherein illumination leads to formation of a spin-correlated, triplet pair with a yield of ca. 13% and with a time constant of 4 ± 1 ps. The triplet pair, which is localized on the aggregate, cannot separate and decays with a mean lifetime of 80 ± 10 ps. The relaxed S1 state of the weakly coupled, phenyl-linked bichromophores establishes an equilibrium with an intramolecular charge-transfer state over a hundred picoseconds or so, depending on the solvent and the geometry of the linkage. This equilibrium mixture, being dominated by the relaxed S1 state, decays on the nanosecond time scale in solution at room temperature without implication of a triplet state. Self-association occurs at higher concentration and, for the para-bridged bichromophore, leads to inefficient triplet formation in tetrahydrofuran at room temperature.

When a Twist Makes a Difference: Exploring PCET and ESIPT on a Nonplanar Hydrogen-Bonded Donor-Acceptor System.

Bioinspired benzimidazole-phenol constructs with an intramolecular hydrogen bond connecting the phenol and the benzimidazole have been synthesized to study both proton-coupled electron transfer (PCET) and excited-state intramolecular proton transfer (ESIPT) processes. Strategic incorporation of a methyl group disrupts the coplanarity between the aromatic units, causing a pronounced twist, weakening the intramolecular hydrogen bond, decreasing the phenol redox potential, reducing the chemical reversibility, and quenching the fluorescence emission. Infrared spectroelectrochemistry and transient absorption spectroscopy confirm the formation of the oxidized product upon PCET and probe excited-state relaxation mechanisms, respectively. Density functional theory calculations of redox potentials corroborate the experimental findings. Additionally, time-dependent density functional theory calculations uncover the fluorescence quenching mechanism, showing that the nonradiative twisted intramolecular charge transfer state responsible for fluorescence quenching is more energetically favorable in the methyl-substituted system. Incorporating groups causing steric hindrance expands the design of biomimetic systems capable of performing both PCET and ESIPT.

Direct observation of the twisted intramolecular charge-transfer state in polycyclic purinium salts.

Based on femtosecond transient absorption spectroscopy (fs-TAS) of 3-methyl-7,8-diphenyl-3H-purino[6,1-a] isoquinolin-6-ium trifluoromethanesulfonate in dimethyl sulfoxide (DMSO), the stimulated emission (SE) signal redshifts from 400 to 500 nm in 4.8 ps. In a glycerol/DMSO mixed solution, when the glycerol content is 25% and 50%, the delay is extended to 6.9 and 68 ps, respectively. The theoretical emission spectrum in the scanning of potential energy curves demonstrates that the rotation of the φ2 with a lower energy barrier (16.1 kcal/mol) occurs prior to that of φ1. In addition, the purinium salt molecule has a twisted intramolecular charge transfer (TICT) process occurring from the locally excited (LE) state to the charge transfer (CT) state, and torsion of φ2 is restrained in high-viscosity environments, which induces the redshift of SE and its increasing lifetime.

Modulating Charge-Transfer Excited States of Multiple Resonance Emitters via Intramolecular Covalent Bond Locking.

Advanced multiple resonance thermally activated delayed fluorescence (MR-TADF) emitters with high efficiency and color purity have emerged as a research focus in the development of ultra-high-definition displays. Herein, we disclose an approach to modulate the charge-transfer excited states of MR emitters via intramolecular covalent bond locking. This strategy can promote the evolution of strong intramolecular charge-transfer (ICT) states into weak ICT states, ultimately narrowing the full-width at half-maximum (FWHM) of emitters. To modulate the ICT intensity, two octagonal rings are introduced to yield molecule m-DCzDAz-BNCz. Compounds m-CzDAz-BNCz and m-DCzDAz-BNCz exhibit bright light-green and green fluorescence in toluene, with emission maxima of 504 and 513 nm, and FWHMs of 28 and 34 nm, respectively. Sensitized organic light-emitting diodes (OLEDs) employing emitters m-CzDAz-BNCz and m-DCzDAz-BNCz exhibit green emission with peaks of 508 and 520 nm, Commission Internationale de L'Eclairage (CIE) coordinates of (0.12, 0.65) and (0.19, 0.69), and maximum external quantum efficiencies (EQEs) of 30.2 % and 32.6 %, respectively.

A Constrained CASSCF(2,2) Approach to Study Electron Transfer between a Molecule and Metal Cluster.

We have implemented a constrained CASSCF(2,2) calculation so as to study thermal electron transfer between a chlorine ion and a cluster of lithium atoms of variable size (from 1 to 17). Our calculations illustrate how the geometry of the ground state-charge transfer state crossing point (as well as the strength of a diabatic coupling) can depend sensitively on the number of metal ions (i.e., the size of the cluster) and the relative positioning of the donor and acceptor. Thus, this set of calculations is an initial step toward understanding the transition from homogeneous to heterogeneous electron transfer. In the future, these constrained calculations should allow us to model still far larger systems, ideally opening up a pathway to study meaningful electrochemical phenomena.

Understanding the Nonradiative Charge Recombination in Organic Photovoltaics: From Molecule to Device

AbstractOrganic photovoltaics (OPVs) have made significant strides with efficiencies now exceeding 20%, positioning them as potential competitors to inorganic solar technologies. One of the most critical challenges toward this goal is the severe open‐circuit voltage (Voc) loss caused by the nonradiative charge recombination (NRCR). Herein, this review comprehensively summarizes the NRCR mechanisms and suppression techniques of OPVs across various scales from molecule to device. Specifically, the origins of NRCR in a single molecule are first summarized, and molecular design principles toward high photoluminescence quantum yield are reviewed following the Marcus theory. Next, the effect of aggregation on NRCR is reviewed, as well as the molecular and processing strategies to modulate the film packing for NRCR suppression. Furthermore, the progresses in the avoidance of nonradiative loss pathways mediated by charge transfer states and triplet states in donor:acceptor bulk heterojunctions are tracked. Besides, the interfacial optimization and device structure design to maximize the electroluminescent quantum efficiency are presented. Finally, several potential pathways toward curtailing NRCR for high‐performance OPVs are outlined. Therefore, this review shows an insightful perspective to understand and mitigate the NRCR at multi‐scales, and is poised to provide a clear roadmap for the next breakthrough of OPVs.