16-bit Instruction Set Research Articles

낮은 복잡도의 Deeply Embedded 중앙처리장치 및 시스템온칩 구현

Abstract This paper proposes a low-complexity central processing unit (CPU) that is suitable for deeply embeddedsystems, including Internet of things (IoT) applications. The core features a 16-bit instruction set architecture (ISA) that leads to high code density, as well as a multicycle architecture with a counter-based control unit and adder sharing that lead to a small hardware area. A co-processor, instruction cache, AMBA bus, internal SRAM, externalmemory, on-chip debugger (OCD), and peripheral I/Os are placed around the core to make a system-on-a-chip (SoC) platform. This platform is based on a modified Harvard architecture to facilitate memory access by reducing the number of access clock cycles. The SoC platform and CPU were simulated and verified at the C and the assembly levels, and FPGA prototyping with integrated logic analysis was carried out. The CPU was synthesized at the ASICfront-end gate netlist level using a 0.18μm digital CMOS technology with 1.8V supply, resulting in a gate count ofmerely 7700 at a 50MHz clock speed. The SoC platform was embedded in an FPGA on a miniature board and appliedto deeply embedded IoT applications.

Dynamic coalescing for 16-bit instructions

In the embedded domain, memory usage and energy consumption are critical constraints.Embedded processors such as the ARM and MIPS provide a 16-bit instruction set, (called Thumb in the case of the ARM family of processors), in addition to the 32-bit instruction set to address these concerns. Using 16-bit instructions one can achieve code size reduction and instruction cache energy savings at the cost of performance. This paper presents a novel approach that enhances the performance of 16-bit Thumb code. We have observed that throughout Thumb code there exist Thumb instruction pairs that are equivalent to a single ARM instruction. We have developed enhancements to the processor microarchitecture and the Thumb instruction set to exploit this property. We enhance the Thumb instruction set by incorporating Augmenting eXtensions (AX). A Thumb instruction pair that can be combined into a single ARM instruction is replaced by an AXThumb instruction pair by the compiler. The AX instruction is coalesced with the immediately following Thumb instruction to generate a single ARM instruction at decode time. The enhanced microarchitecture ensures that coalescing does not introduce pipeline delays or increase cycle time thereby resulting in reduction of both instruction counts and cycle counts. Using AX instructions and coalescing hardware we are also able to support efficient predicated execution in 16-bit mode.

Enhancing the performance of 16-bit code using augmenting instructions

In the embedded domain, memory usage and energy consumption are critical constraints. Dual width instruction set embedded processors such as the ARM provide a 16-bit instruction set in addition to the 32-bit instruction set to address these concerns. Using 16-bit instructions one can achieve code size reduction and I-cache energy savings at the cost of performance. We have observed that throughout 16-bit Thumb code there exist Thumb instruction pairs that are equivalent to a single ARM instruction. We have developed an approach which uses combination of compiler and architectural support to exploit the above property for improving performance of 16-bit code. We enhance the Thumb instruction set by incorporating Augmenting eXtensions (AX). The task of the compiler is to identify pairs of Thumb instructions that can be safely combined and executed as single ARM instructions. The compiler replaces such pairs of Thumb instructions by AX+Thumb instruction pairs. The AX instruction is coalesced with the immediately following Thumb instruction to generate a single ARM instruction at decode time. Thus, using AX instructions, the compiler can both generate compact 16-bit code and provide hardware with information needed to produce better performing 32-bit code.