Trade imbalances and global disturbances generate mismatches in the supply and demand of empty containers (ECs) that elevate the need for empty container repositioning (ECR). This research investigated dry ports as a potential means to minimize EC movements, and thus reduce costs and emissions. We assessed the environmental and economic effects of two ECR strategies via dry ports—street turns and extended free temporary storage—considering different scenarios of collaboration between shipping lines with different levels of container substitution. A multi-paradigm simulation combined agent-based and discrete-event modelling to represent flows and estimate kilometers travelled, CO2 emissions, and costs resulting from combinations of ECR strategies and scenarios. Full ownership container substitution combined with extended free temporary storage at the dry port (FTDP) most improved ECR metrics, despite implementation challenges. Our results may be instrumental in increasing shipping lines’ collaboration while reducing environmental impacts in up to 32 % of the inland ECR emissions.

The Tokyo 2020 Olympic Sailing Competitions were held in Enoshima Bay between the 25th of July and the 4th of August 2021. The climatological and the strategical analysis of the race area for the Swedish Sailing Team was developed in the three years prior to the Olympics (Masino et al., 2021). The result of the three years’ research was a tool named ”Call Book” that provides strategical rules for sailors and coaches both in terms of expected ranges of wind speed and direction and also in terms of trends with explanations for each identified weather pattern. The support team was working not only on the forecast but also on the specific analysis of the weather data in the race areas as measured on the water by the Olympics organizing authorities and monitored through the SAP Analytics website (SAP Sailing Analytics, 2021). Two race areas are herein taken into consideration, namely Enoshima and Zushi, where the Swedish Team athletes sailed most of the races. A statistical meta-analysis on the comparison between the forecast issued using the ”Call Book” and measured data on the race areas is carried out, investigating the specific outcome of the strategy of the races with the forecasted meteorological data.

Identifying the ship’s maneuvering dynamics can build models for ship maneuverability predictions with a wide range of useful applications. A majority of the publications in this field are based on simulated data. In this paper model test data is used. The identification process can be decomposed into finding a suitable manoeuvring model for the hydrodynamic forces and to correctly handle errors from the measurement noise. A parameter estimation is proposed to identify the hydrodynamic derivatives. The most suitable manoeuvring model is found using the parameter estimation with cross-validation on a set of competing manoeuvring models. The parameter estimation uses inverse dynamics regression and Extended Kalman filter (EKF) with a Rauch Tung Striebel (RTS) smoother. Two case study vessels, wPCC and KVLCC2, with very different maneuverability characteristics are used to demonstrate and validate the proposed method. Turning circle predictions with the robust manoeuvring models, trained on zigzag model tests, show good agreement with the corresponding model test results for both ships.

This paper deals with several aspects of surface roughness modelling in RANS codes applied to full-scale ship simulations. To select a method that is suitable for wall-resolved RANS solvers and gives reliable results at high Reynolds numbers, five different roughness models are compared. A grid uncertainty analysis is performed and the sensitivity to the grid resolution close to the wall (y+) is investigated. The results are compared to extrapolated results of experiments carried out with rough plates with various heights and roughness types. A correlation factor between the Average Hull Roughness and the equivalent sand roughness height is investigated, and a value of five is deemed the most suitable. The work suggests that the Aupoix-Colebrook roughness model gives the best results for full-scale ship simulations, at least with the current code, and that the near-wall grid resolution required for smooth surfaces can be applied also for the rough case.

Carsharing is an important element in the transition to a more sustainable transport system. In contrast to the widely studied business-to-consumer (B2C) market segment, studies on Business-to-business (B2B) carsharing and its impacts are limited. This paper analyses the factors that drive and hinder organisations from using B2B carsharing for their employees’ work trips. The paper takes a case study approach, analysing B2B carsharing use for local work-trips at seven employers in Gothenburg, Sweden, based on interviews with employers, property owners, and carsharing operators. Our results indicate that carsharing services can contribute to reducing the employers’ costs for work-trips, ensuring the sustainability and safety of the employee’s work-trips, as well as increasing the employer’s workplace attractivity. However, carsharing services are currently used only to a very limited extent. Obstacles that limit a greater use of carsharing services are employers’ lack of data on the employees’ work travel patterns, little economic incentives for employers, as well as parking management and travel policies that favour the use of the private car.

Determining a ship’s propulsive power is a critical stage in the design phase in which the evaluation of the stern plays a crucial role. Different flow regimes can be observed depending on the position and shape of the transom. This paper investigates the wetted-transom flow characteristics and their implications on the 1978 ITTC Performance Prediction Method. In the case of flow separation, such as the wetted-transom flow, the current ITTC-78 procedure does not provide an alternative method. Therefore, two alternative methods were proposed based on the investigations of CFD computations on seven hull forms. The firstly proposed method is a combined EFD&CFD method called the two form factor method. It requires CFD computations in model and full-scale, and it can handle any case of flow separation, including the wetted-transom flow. The second proposed method is an empirical correction formula for the hulls with a wetted-transom flow. Finally, the full-scale speed-power relations between the speed trials and the full-scale predictions from the two alternative methods and the standard ITTC-78 method were presented. It is observed that the two suggested methods considerably improve the correlation between the predictions and the speed trials.

Shifting freight transport from roads to more energy-efficient modes of sea and rail, i.e., a modal shift, is essential to reducing emissions from transport. Two actors influencing the rate of transition to such modes are logistics service providers (LSPs) and shippers. In their relationships, power and trust are vital interorganisational factors that need to be managed. The purpose of this paper is to examine how the existence and use of power and trust and their interplay can facilitate a modal shift in the ongoing relationships between shippers and LSPs. The research is based on an in-depth qualitative case-study of two cases, each consisting of the relationship between a retailer and an LSP. Empirical data was collected through semi-structured interviews, and the analysis was guided by three dimensions of power (resources, processes and meaning) and three types of trust (contractual, competence and goodwill). The results show that power and trust do, indeed, exist and influence modal shift solutions in shipper–LSP relationships. Alignment between shippers and LSPs is found to be vital in terms of the perceptions and values needed to strengthen the power of meaning, and in terms of the processes and participation needed to strengthen the power of processes. Trust is a facilitating factor in both instances, and it also works as a mediating factor in any asymmetry between the power of shippers' resources and LSPs.

ABSTRACT Management of operational disruptions with support of information is essential to facilitate the shift from road to rail and to ensure efficient hinterland intermodal transport chains. Therefore, the purpose of this paper is to investigate the operational efficiency effects of information on operational disruption management in hinterland transport with a dry port to facilitate efficient intermodal hinterland transport. For that purpose, a simulation model with five scenarios was developed and applied using empirical data from a real-world case of a hinterland transport chain with a dry port. The results show that the resource utilisation of the trucks that deliver containers from the dry port to the receivers can be increased using the information that supports management of the disruption. Nevertheless, in attempts to increase resource utilisation when managing the disruption, issues arose from efficiency measures that are important for other actors, e.g. the receivers.

The effects of multiple wings interacting and the change in efficiency due to those effects as well as optimal sheeting angles are becoming an important area of study with the advent of wind-propelled ships for goods transport. This research presents a first analysis of wind tunnel tests carried out at the University of Southampton R.J. Mitchell wind tunnel where three wings are subject to turbulent flow with Reynolds number in excess of 1 million. A range of possible variations of ship heading and apparent wind angles are tested taking into consideration the blockage effects and the geometrical characteristics of the working section. The forces and moments are captured on each individual wing as well as in the overall wind tunnel balance with 6-components dynamometers. Furthermore, pressure sensors and PIV data are recorded during the tests to provide the experimental campaign with results that can validate both qualitatively and quantitatively the numerical tools developed to aid the design stage of wind propelled vessels.