Abstract One of the main reasons for gas turbines’ performance losses is the deposition of dirt on the compressor blades. Dirt deposit has to be periodically removed to keep the engine performance as high as possible. This is the reason motivating the presence of online water washing systems in most compressor gas turbines. Such systems aim at cleaning the compressor blades to recover efficiency; thus, the larger the water flow, the better it is assumed the compressor is cleaned (fixing all the other conditions). In the present work, we simulate the long-term behavior of a real axial compressor, from the inlet to the first-stage rotor, subject to online water washing with different water flowrates. The frozen rotor approach is adopted to solve the flow field in the rotor region. Simulations are performed by using the unsteady k-ɛ realizable model coupled with a Lagrangian tracking of the injected liquid phase. Water droplet erosion is handled by using a semi-empirical model developed by the authors. In each simulation, 504,000 parcels have been tracked, providing statistically reliable predictions. To simulate the long-term evolution of the washing process, a discrete mesh morphing technique coupled with the use of specific scale factors is adopted. Each of the tested configurations is composed of three successive erosive steps up to the blade compressor end-of-life. By varying the water-to-air mass fraction (WAMF*), six different injection configurations are assessed in terms of long-time average washing efficiency and erosion risk. The results predicted show the dependence of the considered washing indices on water mass flowrate and set the stage for the development of a washing optimization tool, which can help the design and management processes. In scenarios where washing indices are given minimal importance and the objective is to reduce the risk of erosion, the optimal injection configuration was shown to correspond to a WAMF* value of 0.250. Conversely, when washing efficiency is prioritized, the optimal injection configuration has been shown to correspond to the case where WAMF* = 0.750.

The present study investigates the ecotoxicity of 7 biofertilizers, including biowaste-derived organic matrices. Real-field tests were conducted to assess the impacts of soil fertilization with sewage sludge digestate from high-solid thermophilic anaerobic digestion (HSTAD) compared to those obtained on non-amended and urea-fertilized soils. The physical-chemical and ecotoxic impact of HSTAD digestate on soil was monitored for 12 months, at 5 time points and 2 soil depths, on a maize field divided in 3 portions (non-treated, fertilized with urea, amended with digestate). The chemical and physical characteristics of the soil were previously analyzed for 3 years to provide a long-term outlook of the impacts of biofertilizer application. Seven bioindicators were utilized for direct (on whole soil) and indirect (on soil elutriates) ecotoxicological tests on fertilizers and amended soils, including plant seeds (Lepidium sativum, Sorghum saccharatum, and Sinapsis alba), the aquatic organism Daphnia magna, the alga Raphidocelis subcapitata, the luminescent bacterium Aliivibrio fischeri, and the Nematode Caenorhabditis elegans. No serious negative effects on soil fertilized with HSTAD digestate were evidenced. Conversely, bioassays rather showed positive effects, encouraging the utilization of HSTAD digestate in agriculture, considering the proper concentrations of use. The obtained data were interpolated and a test battery integrated index was generated, confirming the absence of ecotoxicological risk for the soils amended with the applied fertilizers. The long-term evolution of the physical-chemical soil characteristics (including the concentrations of potential contaminants) was similar for both HSTAD digestate and urea application as well as for non-fertilized soil, indicating no negative effects due to digestate application on land. On the contrary, digestate application improved the content of stabilized organic matter and nutrients in soil. This study proposes a more correct approach to ecotoxicity assessment of fertilized soils for biofertilizer evaluation and demonstrates the long-term safe application of HSTAD digestate on agricultural soil.

Retrieval and visualization of biological data are essential for understanding complex systems. With the increasing volume of data generated from high-throughput sequencing technologies, effective and optimized data visualization tools have become indispensable. This is particularly relevant in the COVID-19 postpandemic period, where understanding the diversity and interactions of microbial communities (i.e., viral and bacterial) constitutes an important asset to develop and plan suitable interventions.In this chapter, we show the usage and the potentials of ExTaxsI (Exploring Taxonomy Information) tool to retrieve viral biodiversity data stored in National Center for Biotechnology Information (NCBI) databases and create the related visualization. In addition, by integrating different functions and modules, the tool generates relevant types of visualization plots to facilitate the exploration of microbial biodiversity communities useful to deep dive into ecological and taxonomic relationships among different species and identify potential significant targets.Using the Monkeypox virus as a case study, this work points out significant perspectives on biological data visualization, which can be used to gain insights into the ecology, evolution, and pathogenesis of viruses. Accordingly, we show the potentiality of ExTaxsI to organize and describe the available/downloaded data in an easy, simple, and interpretable way allowing the user to interact dynamically with the visualization plots through specific filters, zoom, and explore functions.

BackgroundSustainable aquaculture relies on multiple factors, including water quality, fish diets, and farmed fish. Replacing fishmeal (FM) with alternative protein sources is key for improving sustainability in aquaculture and promoting fish health. Indeed, great research efforts have been made to evaluate novel feed formulations, focusing especially on the effects on the fish gut microbiome. Few studies have explored host-environment interactions. In the present study, we evaluated the influence of novel insect-based (Tenebrio molitor) fish diets on the microbiome at the water-fish interface in an engineered rainbow trout (Oncorhynchus mykiss) farming ecosystem. Using 16S rRNA gene metabarcoding, we comprehensively analyzed the microbiomes of water, tank biofilm, fish intestinal mucus, fish cutis, and feed samples.ResultsCore microbiome analysis revealed the presence of a highly reduced core shared by all sample sources, constituted by Aeromonas spp., in both the control and novel feed test groups. Network analysis showed that samples were clustered based on the sample source, with no significant differences related to the feed formulation tested. Thus, the different diets did not seem to affect the environment (water and tank biofilm) and fish (cutis and intestinal mucus) microbiomes. To disentangle the contribution of feed at a finer scale, we performed a differential abundance analysis and observed differential enrichment/impoverishment in specific taxa, comparing the samples belonging to the control diet group and the insect-based diet group.ConclusionsOmic exploration of the water-fish interface exposes patterns that are otherwise undetected. These data demonstrate a link between the environment and fish and show that subtle but significant differences are caused by feed composition. Thus, the research presented here is a step towards positively influencing the aquaculture environment and its microbiome.

Placenta mediates the transfer of nutrients, oxygen and drugs from mother to fetus. It is constituted by two cellular layers separated by the intervillous space: the outer is in direct contact with maternal blood (decidua placenta), and the inner (villi) directly in contact with the fetus. Environmental contaminants, such as per- and polyfluoroalkyl substances (PFAS) also demonstrated the ability to cross the tissue multiple layers, posing at risk the health of the fetus. The aim of the present study was to analyse the PFAS amount in decidua and villi placenta explants and to study differences in their distribution among the two side of this organ. The determination of 23 PFAS was carried out by liquid chromatography coupled to high-resolution accurate mass spectrometry (LC-HRAM). Our research included women who delivered at term between 2021 and 2022. Our data indicated that all samples contained at least one PFAS, demonstrating the ubiquitarian presence of these compounds in our population. A high occurrence of PFOS, PFOA and PFHxS, followed by PFHxA, PFBS and PFUnA was found. The fluorotelomer 6:2 FTS was also present in more than 40% of samples and this represent the first data on placenta explants. Mean and median PFAS values for decidual explants were 0.5 ng/g and 0.4 ng/g (SD 0.3), while for villi explants mean and median values were 0.6 ng/g and 0.4 ng/g (SD 0.4). A different pattern of accumulation was observed between villi and decidual explants for PFOS, PFOA and PFUnA (villi > decidua) and PFHxA, PFHxS, PFBS and 6:2 FTS (decidua > villi). Even if the mechanism of this selectively accumuation is not yet understood, molecular degree of ionization and its lipophilicity could at least in part explain this difference. This study expands the limited data describing PFAS levels in the placenta and pose attention on PFAS exposure during pregnancy.

Due to the complexity of the Automotive Electromagnetic Compatibility legislation in force, this article aims to describe a simplified overview of several technical standards relating to conducted immunity tests on electronic sub-assemblies, where communication lines are involved. The discussed automotive standards reported in this article are: ISO 11452-1 and ISO 11452-4 for continuous narrowband electromagnetic fields immunity test, bulk current injection and tubular wave coupler, IEC 61000-4-5 for immunity against surge events, IEC 61000-4-4 for electrical fast transient/burst events immunity, ISO 10605 for electrostatic discharge events immunity, ISO 7637-2 and ISO 7637-3 for transient disturbances events immunity. For each cited standard, disturbance bandwidth evaluation was performed. Practical examples are reported, with analysis and discussion of some of the adoptable disturbance countermeasures applicable on controlled area network communication lines, and possible design advantages and disadvantages with different types of filtering and suppression circuit solutions.

Aquaculture significantly contributes to the growing demand for food worldwide. However, diseases associated with intensive aquaculture conditions, especially the skin related syndromes, may have significant implications on fish health and industry. In farmed rainbow trout, red mark syndrome (RMS), which consists of multiple skin lesions, currently lacks recognized aetiological agents, and increased efforts are needed to elucidate the onset of these conditions. Most of the past studies were focused on analyzing skin lesions, but no study focused on water, a medium constantly interacting with fish. Indeed, water tanks are environmental niches colonized by microbial communities, which may be implicated in the onset of the disease. Here, we present the results of water and sediment microbiome analyses performed in an RMS-affected aquaculture facility, bringing new knowledge about the environmental microbiomes harbored under these conditions. On the whole, no significant differences in the bacterial community structure were reported in RMS-affected tanks compared to the RMS-free ones. However, we highlighted significant differences in microbiome composition when analyzing different samples source (i.e., water and sediments). Looking at the finer scale, we measured significant changes in the relative abundances of specific taxa in RMS-affected tanks, especially when analyzing water samples. Our results provide worthwhile insight into a mostly uncharacterized ecological scenario, aiding future studies on the aquaculture built environment for disease prevention and monitoring.

Highly stabilized digestate from sewage sludge and digestate-derived ammonium sulphate (RFs), were used in a comparison with synthetic mineral fertilizers (SF) to crop maize in a three-year plot trial in open fields. RFs and SF were dosed to ensure the same amount of mineral N (ammonia-N). In doing so, plots fertilized with digestate received much more N (+185 kg ha−1 of organic N) because digestate also contained organic N. The fate of nitrogen was studied by measuring mineral and organic N in soil at different depths, ammonia and N2O emissions, and N uptake in crops. Soil analyses indicated that at one-meter depth there was no significant difference in nitrate content between RF, SF and Unfertilized plots during crop season indicating that more N dosed with digestate did not lead to extra nitrate leaching. Ammonia emissions and N content in plants and grains measured were also similar for both RF and SF. Measuring denitrification activity by using gene makers resulted in a higher denitrification activity for RF than SF. Nevertheless, N2O measurements showed that SF emitted more N2O than RF (although it was not statistically different) (7.59 ± 3.2 kgN ha−1 for RF and 10.3 ± 6.8 kgN ha−1 for SF), suggesting that probably the addition of organic matter with digestate to RF, increased the denitrification efficiency so that N2 production was favoured. Soil analyses, although were not able detecting N differences between SF and Rf after three years of cropping, revealed a statistical increasing of total carbon, suggesting that dosing digestate lead to carbon (and maybe N) accumulation in soil. Data seem to suggest that N2O/N2 emission and organic N accumulation in soil can explain the fate of the extra N dosed (organic-N) in RF plots.