ZrO2/hydroxyapatite coating on titanium by electrolytic deposition

Abstract

In this study, hydroxyapatite (HA) was coated on a titanium (Ti) substrate over a ZrO(2) layer by the electrolytic deposition method, this double layer coating was then compared with a single layer coating of HA. The HA layer was used to increase the bioactivity and osteoconductivity of the Ti substrate, and the ZrO(2) layer was intended to improve the bonding strength between the HA layer and Ti substrate, and to prevent the corrosion of the Ti substrate. The electrolytic deposition formed an HA layer with a thicknesses of approximately 20 mum, which adhered tightly to the Ti substrate. The bonding strength of the HA/ZrO(2) double layer coating on Ti was markedly improved when compared to that of the HA single coating on Ti. The improvement in bonding strength with the use of a ZrO(2) base layer was attributed to the resulting increase in chemical affinity of the ZrO(2) to the HA layer and to the Ti substrate. The osteoblast-like cells cultured on the HA/ZrO(2) coating surface, proliferated in a similar manner to those on the HA single coating and on the pure Ti surfaces. At the same time, the corrosion resistance of Ti was improved by the presence of the ZrO(2) coating, as shown by a potentiodynamic polarization test.