Zirconia-high entropy alloys joints for biomedical applications: The role of Ag-based fillers on interfacial reactivity

Abstract

Metal-ceramic joints represent an important choice for biomedical devices, in orthopaedic field or as micro-stimulators. ZrO 2 -Ag-HEA joint is here proposed to replace the currently used Ti6Al4V by new Ti-based refractory HEAs. To evaluate the system reactivity, wettability of ZrO 2 by different Ag-based alloys at 1000 °C and their interfacial layers were studied, for the first time. Interpretation and discussion of systems reactivity were supported by thermodynamic calculations, according to the CALPHAD approach and the ad-hoc Ag-Ti-Zr-O thermodynamic database, implemented in this work. A good wettability was reached at 1000 °C adding Ti to Ag: Ag-4Ti and Ag-8Ti reached contact angles of 81–85°. Ag-4Ti-2Zr showed the best wettability (77°) and the most complex interfacial microstructure. A continuous hcp (Ti,O), ~ 20 µm thick, promoted the wettability of Ag-4Ti and Ag-8Ti. In both cases, AgTi was the only intermetallic compound found in the bulk. Ag-4Ti-2Zr formed a thicker interfacial layer of hcp-(Ti,Zr,O) + bcc-(Ti,Zr) + a less compact Ag(Ti,Zr) 2 layer. Here, a low amount of Ag(Ti,Zr) and Ag(Ti,Zr) 2 was found in the Ag matrix. Since Ag resulted a promising filler to braze Ti-rich substrates to ZrO 2 at 1000 °C, preliminary HEA-Ag-ZrO 2 joints were characterized. A sound and defects-free interface was observed, with a first layer, mainly formed by Ag, Ti and Zr (HV ~ 600), and a Ag-based interface (HV ~ 250), extending until the HEA. Further works envisage mechanical and electrochemical evaluations of the system to pave the way for the production of novel HEA-Ag-ZrO 2 joints to be used in biomedical applications. • Ti addition to Ag promoted ZrO 2 wettability at 1000 °C forming hcp-(Ti,O) at the interface. • Ag-4Ti-2Zr tested on ZrO 2 at 1000 °C showed the best wettability (ϑ<80°). • An ad-hoc Ag-O-Ti-Zr database was assembled and used to support reactivity discussion. • Ag-4Ti-2Zr showed an hcp-(Ti,O)+bcc-(Ti,Zr)+Ag(Ti,Zr) 2 interfacial layer formed at 1000 °C. • Ti 1.5 ZrTa 0.5 Hf 0.5 Nb 0.5 HEA was successfully brazed to ZrO 2 by using a Ag filler at 1000 °C.