Zinc oxide-paper based sensor for photoconductive ultraviolet detection

Abstract

Paper based sensor is the new technology to fabricate a simple, portable, and low cost device that exhibits the comparable properties and functions with those fabricated using complex fabrication process. Paper based sensor is usually applied in environmental monitoring, health diagnostics, and food quality control. This research is focusing on the paper based sensor that will contribute to the development of Ultraviolet (UV) sensor. The fabrication of the sensor was done by using different grade of pencil, namely 6B and 2B on different type of paper. The different grade of pencil corresponds to different percentage of graphite and clay. As for the type of paper, A4 printing paper and Whatman filter paper were used. UV sensing operation was analyzed from the measurement of current-voltage (I-V) characteristics under the exposure of UV light. Zinc oxide (ZnO) was coated on the sensor to facilitate the detection in the presence of UV. The sample fabricated using 6B pencil grade on A4 printing paper and with ZnO coating showed a better UV sensing performance compared to other samples. This is due to the high conduction of 6B pencil grade and smooth surface of A4 printing paper. The ZnO coating increased the sensor sensitivity and response towards the UV light. These findings provide valuable information which can be used in fabricating a low-cost and simple UV paper sensor.