Abstract

This paper reports the sol–gel preparation of ZnAl2O4 (ZA) and ZnAl2O4–TiO2 (ZAT) dielectric ceramic nanoparticles for fabricating prototype microstrip patch antennas. The prepared nanoparticles were polycrystalline in nature with their crystallite sizes of 9.4 and 11 nm, along with average grain diameters of 16 and 12 nm corresponding to samples ZA and ZAT. Dielectric properties were investigated using an LCR meter, which endorsed enhanced dielectric permittivity and decreased dielectric loss. Finally, prototype microstrip patch antennas named AZA and AZAT were fabricated using the prepared nanoparticles, and their performances were evaluated. Both antennas exhibited resonant peaks in the frequency range from 6.4 to 6.5 GHz. The antenna AZAT showed a return loss of −37.07 dB with a voltage standing wave ratio (VSWR) of 1.02 compared to the return loss of −19.42 dB, and a VSWR of 1.24 corresponds to AZA. The AZAT antenna’s improved return loss can be regarded as the increased dielectric permittivity and reduced tangent loss of the ZAT sample. Furthermore, the ZAT antenna evidenced increased/decreased forwarded/reflected power decreased reflection coefficient and an optimal VSWR value compared to that of the AZA antenna.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.