ZERO-POLE APPROACH TO COMPUTER AIDED DESIGN OF IN-LINE SIW FILTERS WITH TRANSMISSION ZEROS

Abstract

This paper presents a design of a new type of in-line pseudo-elliptic fllters implemented in substrate integrated waveguide (SIW) technology. To realize transmission zeros in in-line topology, frequency-dependent couplings were used. Such dispersive couplings were implemented as shorted stubs. The design process starts with the generation of a suitable starting point. To this end, an approximation of SIW as a rectangular waveguide is used and a fast electromagnetic solver based on mode-matching technique is utilized (Wave Wizard). The next step is the optimization process of a fllter in a full-wave 3D EM simulator Ansoft HFSS. The Optimization routine employs a cost function involving zeros and poles of the rational functions approximating scattering parameters. To increase the speed of convergence, a built-in derivative calculation feature was used and zeros and poles and their derivatives with respect to design parameters were extracted using the vector fltting algorithm. Experimental validation of the method is demonstrated by a third-order fllter with asymmetric response and a flfth-order fllter with two transmission zeros in addition to an asymmetric response. The experimental results show good agreement between the simulated and measured data.