Zero energy building optimization for a residential complex with a new optimized cogeneration system for electricity, cooling, heating and freshwater production

Abstract

In this research, a multi-generation system was proposed to meet the energy consumption of a 120-unit zero-energy residential complex with 100 m2 and 2 bedrooms in Sydney, Australia. To meet the heating and cooling demand of the residential complex, a compression chiller was used, and electrical energy was provided using the system's production power. The main goal of this research is to define a zero-energy building by providing the energy consumption of a residential complex with a solar system. Building Energy Optimization (BEopt) Software has been used for the process of simulating the residential complex and extracting the required load of the residential complex. The design of the load supply system of the residential complex was done using EES thermodynamic software. In this research, a large number of inputs have been used in different scenarios to optimize the residential complex, and the tool used in this research by all the modes introduced as inputs turns the problem into a multi-objective optimization problem. The results of the investigation of the residential complex showed that the amount of electricity consumption, heating, and cooling of the residential complex during the year is 36728, 133123, and 17,902 kWh, respectively. Also, by optimizing the energy consumption of the residential complex, it is possible to reduce CO2 emissions and prevent the increase in environmental pollution. The optimal results showed that the system in its most optimal state can reach an exergy efficiency of 25.18 % and a system cost rate of 46.6 $/h. The performance of the system in the city of Sydney showed that the system can produce 166,164 kWh of electricity, 467,945 kWh of heating, and 183,370 kWh of cooling in one year. Comparing the results of residential complex consumption load and system production showed that the proposed system can easily provide the residential complex consumption load throughout the year.