Zeolitization of Glassy Topopah Spring Tuff Under Hydrothermal Conditions

Abstract

AbstractIn support of the Nevada Nuclear Waste Storage Investigations Project experiments were conducted to study the effects of heat generated by a nuclear waste repository in densely welded, devitrified tuff on the underlying, compositionally-equivalent glassy tuff at Yucca Mtn. Solid wafers of glassy tuff were reacted with a dilute ground water for several months at 150°C and 250°C at 100 bars pressure in Dickson-type, gold-bag rocking autoclaves. The in-situ chemistry of the hydrothermal fluids was modeled and the chemical affinities for all possible mineral precipitation reactions (contained within the extensive database) were calculated using the EQ3/6 program.In the 250°C experiment the calculations suggest that a zeolite mineral would be expected to form. Analyses of the run products showed that not only had the wafer been extensively corroded and the glass shards replaced by clinoptilolite, but pure clinoptilolite had precipitated directly from solution. In the 150°C experiment, although clay minerals were thermodynamically favored to form in the first half of the experiment, by the end of the run a zeolite mineral was predicted to form. Analyses of the run products showed no well-formed secondary minerals (clays or zeolites) had formed. At the lower temperature the effects of precipitation kinetics may preclude the formation of the zeolite within the time span of this experiment. In general the observations are in relatively good agreement with the geochemical model calculations. This type of study demonstrates the interpretive/predictive capabilities of a combined experimental/geochemical modeling approach to studies of nuclear waste isolation. This combined approach will aid in satisfying licensing requirements to assure long-term performance.