Yield and distribution of products of lignin liquefaction catalyzed by molybdenum-vanadium-phosphorus heteropolyacids

Abstract

ABSTRACT This paper focuses on the performance of Molybdenum-vanadium-phosphorus heteropolyacids (PMo12-xVx) with different V-doped amounts in catalyzing the conversion of lignin to bio-oil, and the distribution of liquefied products. Molybdenum-vanadium-phosphorus heteropolyacids (PMo11V1, PMo10V2, PMo9V3) with different amount (0, 2.5, 5, 10 wt%) were used to catalyze lignin liquefaction. The experimental results showed that PMo12-xVx could effectively catalyze the depolymerization of lignin to bio-oil, and the doping amount of the V atom in PMo12-xVx affects the distribution of lignin depolymerization products. The highest bio-oil yield (53.62wt%) and conversion (57.83wt%) could be obtained from lignin liquefaction at 2.5 wt% PMo9V3. With the increase of PMo12-xVx V-atom doped amount, the content of aliphatic hydrocarbons increased from 3.14% to 40.58%, the content of vanillin increased from none to 8.9%. Based on the analysis of bio-oil, FT-IR data, and DFT simulation results, it was found that the selective cleavage of the Cα-Cβ bond and the ring-opening of the carbon at the methyl end of lignin were the main reasons for the high yield of vanillin and aliphatic hydrocarbons during the depolymerization of lignin catalyzed by PMo12-xVx. Finally, a possible reaction pathway for the PMo12-xVx-catalyzed depolymerization of lignin to vanillin and aliphatic hydrocarbons was proposed.