Abstract
For the medium-power solid state laser, growing technologies of large size Nd:YAG crystals, Kr arc lamps, and technologies of laser performance were developed. By a Nd:YAG rod, which sizes are 8mm of diameter and 150mm of length, and a prolate type pumping cavity which minor axis is 30cm, an output power of 365W and a conversion efficiency of 3.6% are obtained.In the Tsukuba Test Plant, the 300W laser beam is switched into two optical fibers alternately, and guided to two laser machining heads. The laser beam is used to cut the chips, which grow from work piece at turning process, and to deburr after mechanical machining of gear.For the medium-power solid state laser, growing technologies of large size Nd:YAG crystals, Kr arc lamps, and technologies of laser performance were developed. By a Nd:YAG rod, which sizes are 8mm of diameter and 150mm of length, and a prolate type pumping cavity which minor axis is 30cm, an output power of 365W and a conversion efficiency of 3.6% are obtained.In the Tsukuba Test Plant, the 300W laser beam is switched into two optical fibers alternately, and guided to two laser machining heads. The laser beam is used to cut the chips, which grow from work piece at turning process, and to deburr after mechanical machining of gear.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
