Abstract
The influence of the geometric shape of the samples on the uncertainty of the coefficient of thermal conductivity measurement of materials by the method of a laser flash has been studied. Using a method of mathematical modeling in the Comsol Multiphysics software, a model that simulates the process of measuring the coefficient of thermal conductivity of samples made of graphite, Mg2Si0.4Sn0.6 and bismuth telluride using a laser flash method has been created. Samples of cylindrical shape with plane-parallel sides and samples in the form of a truncated cylinder, as well as samples in the form of a parallelepiped with a square base, were investigated. It is shown that the measurement uncertainty of samples with plane-parallel sides and sizes up to 12.7 mm, does not exceed 2%. For samples in the form of a truncated cylinder with a diameter of 3 mm and at an angle of ϕ= 1.5°, the measurement uncertainty does not exceed 3%. With an increase in the sample diameter and the ϕ angle, the measurement uncertainty increases significantly.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.