XRD and FTIR Studies of Nanocrystalline Cellulose from Water Hyacinth (<i>Eichornia crassipes</i>) Fiber

Abstract

The isolation and characterization of nanocrystalline cellulose (NCC) from water hyacinth (WH) fibers were carried out. There are two treatments to obtain NCC from WH fibers by chemical and mechanical treatments. The chemical treatment involved alkalization with NaOH 25% in a highly-pressured tube, acid hydrolysis with 5M HCl, and bleaching with (NaClO2:CH3COOH) in ratio 5:2. The mechanical treatment was performed by using ultrasonic homogenizing at 12000 Rpm for 2 h. The morphological surface was observed by Transmission Electron Microscopy (TEM). TEM reported that the size of NCC was 10–40 nm. Crystallinity index and functional group analysis of the NCC WH fibers were also examined using X-Ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR) techniques. XRD reported that the crystallinity index increased significantly after chemical and mechanical treatment due to the presents of crystalline area in the WH fibers. The crystallinity index of raw fiber, digester, bleaching, and ultrasonic homogenizing were 7%, 68%, 69%, and 73% respectively. The content cellulose of final product was 68% as measured by the chemical composition test. Meanwhile, FTIR reported that WH fibers after being given chemical treatment lead the functional group change due to removal hemicellulose and lignin. The result of XRD and FTIR were indicated that the sample of NCC WH fibers presents the structure of cellulose crystal type I.