X-Ray Absorption Spectroscopy and Morphology Study on Antiwear Films Derived from ZDDP Under Different Sliding Frequencies

Abstract

X-ray absorption near-edge structure (XANES) spectroscopy has been used to characterize the chemistry of antiwear (AW) films generated from mineral base oil containing a zinc dialkyl dithiophosphate additive. These films were formed on rubbed steel surfaces with a reciprocating boundary contact using different sliding frequencies. The phosphorus L-edge XANES spectra show that these films have slightly different chemical natures. Longer chain polyphosphates were present on the steel surface prepared at the higher sliding frequencies. The surface morphology of these films was investigated using atomic force microscopy. These images show that the surface morphology of the AW films changes with the sliding frequency. Round and bigger antiwear pads were formed at a lower frequency while higher frequencies resulted in thinner films and flattened surfaces. Nanomechanical properties of these antiwear films were investigated by nanoindentation measurement and the elastic moduli extracted from force–displacement (f–d) curves are similar for all antiwear films, 100 ± 10 GPa.