Abstract
An experimental study on the axial compressive failure of cylindrical unidirectional (UD) carbon fibre-epoxy rods has been performed to better understand kink bands and the relevant damage mechanisms in three dimensions (3D). Post-mortem X-ray micro-computed tomography (micro-CT) imaging has shown that fibre kink bands predominantly all lie within the same plane in a cylindrical rod sample uniaxially compressed without lateral constraint. Kink bands at different stages of development are contained in the damage volume and the geometric parameters of fully developed kink bands are consistent through the damage zone, with a kink-band width ω≈20–320 μm, kink-band angle β≈11–40° and fibre rotation angle Φ (φ+φo)≈18–52°. Fibre failure, longitudinal splitting and matrix micro-cracks within the fibre kink zone are identified by scanning electron microscopy (SEM) and X-ray micro-CT observations. The smallest radius of curvature that corresponds to maximum amount of bending of the unbroken buckled fibres was ∼280μm (40 fibre diameters). Kink-band boundary planes and longitudinal splitting have been extracted and visualised in 3D for the first time.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
