Abstract
The paper presents analysis of influence cutting speed vs and feed rate vf of single-pas grinding process of flute in solid carbide end mill using diamond grinding wheel with metal bond on the geometrical structure and cutting force Fn.
Highlights
Research has been undertaken to determine the effect of grinding speed vs feed speed vf on the geometric structure of the surface and the normal component of the grinding force
The first stage of translation takes into account the rotation of the dynamometer by the angle α, which is variable at time t, because the grinding process of the flute causes continuous rotation of the dynamometer
Based on the analysis of the surface roughness parameter of the Sa surface, it was found that depending on the technological parameters it varies from 1.03 to 1.3 μm, and the parameter value ranges They were 0.27 μm for all trials
Summary
Its main advantage is the clear reduction of grinding time [1, 7, 8] In this process, despite the significant increase in the removal efficiency of sanding, the desired surface quality is obtained by appropriate selection of technological parameters [5, 6]. Despite the significant increase in the removal efficiency of sanding, the desired surface quality is obtained by appropriate selection of technological parameters [5, 6] In this context, research has been undertaken to determine the effect of grinding speed vs feed speed vf on the geometric structure of the surface and the normal component of the grinding force. The process of single-pass grinding of flute in a slot drill, was analyzed
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
