Abstract

A huge number of factors controls rock mass failure, but it is mainly influenced by the state of stress and in particular on the bearing capacity and failure mechanism of the massif. The evaluation of rock mass strength in confined and unconfined compression, as well as its tension strength, are key issues to understand rock mass behaviour prior to failure. A connection between the laboratory analyses of the rock mass and the practical use of the obtained data is presented in the current work. The strength properties, confinement effect and failure mechanisms are successfully studied in volcanic rock specimens from an underground mine. In order to estimate the confinement effect on rock mass strength properties, different confined compression stresses on rock specimens are applied. In addition, the crack initiation and propagation in rock samples are observed and rock mass failure mechanisms are studied. The obtained data is used for stability analyses of an underground openings through determination of the safety factor. The obtained results of the safety factors underlined the influence of the confining stress on the rock mass. The tendency of increasing values of the shear safety factor and decreasing values of the tensile safety factor as confinement increases is found. This is an important observation that would allowed more accurate predictions of the stable and unstable zones of the underground openings to be carried out, and thus the stability of the rock mass to be improved.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call