Working fluid pair selection of thermally integrated pumped thermal electricity storage system for waste heat recovery and energy storage

Abstract

Global issues such as the energy crisis and carbon emissions impulse the development of waste heat recovery and energy storage technologies. In most practical industrial scenarios, the electricity supply and consumption cannot be perfectly matched and effective utilization of waste heat is in urgent need. In the present study, we develop a mathematical model to evaluate the thermally integrated pumped thermal electricity storage (TI-PTES) system to achieve off-peak electricity storage along with low-grade waste heat recovery. A double-layer optimization for screening working fluid pairs with high round-trip efficiency is carried out from 24 fluids of the heat pump and 21 fluids of the Organic Rankine cycle (ORC). In the first-layer multi-objective optimization, 3 types of working fluid pair combination strategies are compared and the great improvement of round-trip efficiency by using zeotropic fluids is proved. Among 7 energy storage temperatures covering from 393.15 K to 423.15 K with an increment interval of 5 K, the highest round-trip efficiency of 101.29% is achieved by adopting the zeotropic fluid pair [90Diethyl ether_10Pentane - 80Butane_20Pentane] at 398.15 K. Furthermore, in the second-layer single-objective optimization, the thermo-economic performance indicators of TI-PTES is evaluated and compared under different designing weighting factor groups, which effectively contributes to the screening of working fluids according to designer's trade-off. Finally, through varying energy storage temperatures and designing weighting factors, optimal working fluid pair recommendations including pure fluids and zeotropic ones were proposed to the fluid selection of TI-PTES.