Working Face Stability of Box Shield Tunneling under Non-Uniform Support Pressure

Abstract

This paper proposes a theoretical model for the stability analysis of a box tunnel face in non-cohesive soils considering the uneven distribution of support pressure caused by multiple cutter heads and screw conveyors. The support pressure distribution on the tunnel face is concave. Accordingly, the failure mechanism is composed of a prism and a wedge, both including three blocks. The relatively smaller support pressure acting on the middle blocks lead to the tendency of slide. Assuming that the support pressure acting on the side blocks is obtained using the active earth pressure coefficient, the support pressure acting on block II can be achieved by limit equilibrium analysis considering the interactions between the blocks. The influences of strength parameters and geometric parameters on the tunnel face stability are discussed in the parametric analysis. For comparison, numerical analysis is conducted in the commercial software OptumG3. It is found that the results given by the proposed model agree well with those from the numerical model. Therefore, the rationality of the proposed model in predicting the collapse geometry is verified.