Workflow to Optimize Cluster Spacing Design of Horizontal Multistage Fractured Well in Unconventional Source Rock

Abstract

Abstract Horizontal drilling and multistage hydraulic fracturing applied in unconventional reservoirs over the past decade to create a large fracture surface area to improve the well productivity. The combination of reservoir quality with perforation cluster spacing and fracture staging are keys to successful hydraulic fracturing treatment for horizontal wells. The objective of this work is to build and calibrate a dynamic model by integrating geologic, hydraulic fracture, and reservoir modeling to optimize the number of clusters and other completion parameters for a horizontal well drilled in the source rock reservoir using simulation and analytical models. The methodology adopted in this study covers the integration of geological, petrophysical, and production data analysis to evaluate reservoir and completion qualities and quantify the heterogeneity and the perforation clusters number required within a frac stage. Assuming all perforation clusters are uniformly distributed within a stage. The hydraulic planer fracture attributes assumed and the surface production measurement together with the production profile were used to calibrate the reservoir model. The properties of the Stimulated Reservoir Volume "SRV" were defined after the final calibration using reservoir model including hydraulic fractures. The calibrated reservoir model was used to carry out sensitivity analyses for cluster spacing optimization and other completion parameters considering the surface and reservoir constraints. An optimum cluster spacing was observed based on the Estimated Ultimate Recovery "EUR" of the subject well by reservoir properties. The final results based on 70% of perforation clusters contribution to production observed from PLT log, and the results of this study were implemented. Afterwards, another study has been undertaken to increasing the stimulation effectiveness and maximizing the number of perforation clusters contributing to productivity as an area for improvement to engineering the completion design. The methodology adopted in this study identifies the most important parameters of completion affecting well productivity for specific unconventional reservoirs. This study will help to engineer completion design, improve cluster efficiency, reduce cost and increase well EUR for the development phase.