Work efficiency in the operations of juvenile thinning of mixed stands of pedunculate oak with hornbeam, ash and other hard broadleaves with the Stihl MS 260 chainsaw

Abstract

This paper presents the results of research of efficacy of the lightweight low power chainsaw Stihl MS 260 in the operations of juvenile thinning in preserved even-aged mixed stands of pedunculate oak with hornbeam, ash and other hard hardwoods. The investigations were carried out in the territory of FE ?Sremska Mitrovica? in three sample plots of different ages. It is the first research of this kind based on the choice of optimal technological solution for the cleaning cuts of oak stands. Technology of work is based on cutting unwanted species at a certain height in order to favor pedunculate oak as the main species. In sample plot 1 the cutting through of undesirable species was carried out in one place and then third parties carried out their processing and transportation. In sample plots 2 and 3 workers cut the unwanted species in several places and stacked the timber on the ground so as not to interfere with the growth of pedunculate oak which does not tolerate shading. In this study, we applied time and work study. Group system of work was recorded. The group typically consisted of 4 workers and a foreman. Fuel consumption was recorded by the method of tank refuelling. The research results show that operating conditions have a significant impact on the effects of work with a chainsaw, as well as on the consumption of fuel and lubricants. The differences are mainly caused by different structures of cut timber.