WO3/rGO nanocomposite-based sensor for the detection and degradation of 4-Chlorophenol

Abstract

Chlorinated organic compounds are useful chemicals or intermediates that are used extensively in both industry and agriculture. The 4-chlorophenol (4CP) in low concentration poses a serious environmental problem and causes many health issues, including cancer and liver disease. In this work, we demonstrated the detection of 4CP at carbon paste electrodes modified using tungsten oxide (WO3) nanorods and reduced graphene oxide (rGO) nanoparticles. The significance of pH on the voltammetric response of 4CP was investigated, and it was discovered that an alkaline pH is an optimal condition for detecting substituted phenols. Moreover, parameters like heterogeneous rate constant, accumulation time, temperature effect, Gibb's free energy, scan rate, enthalpy, activation energy, and entropy were studied. The excellent catalytic and bulk properties of tungsten oxide nanostructures make it an effective modifier in electrochemical sensors. The employment of nanostructured WO3 for the assay of 4CP offers excellent sensitivity, selectivity, and applicability. The WO3 nanostructures are obtained hydrothermally and characterized in detail to understand the crystalline, quantitative and chemical properties. The electrochemical behavior of 4CP was studied utilizing voltammetry techniques. The CV technique was used to optimize and affect many factors in the electrochemical behavior of 4CP. The scan rate investigation helps to examine the physicochemical characteristics of the electrode process, and the electrooxidation of 4CP included 2 electrons and 2 protons. With 4CP, the modified electrode displayed a broad range of linearity. The limit of detection was determined to be 0.102 nM, while the limit of quantification was 0.3433 nM. The concentration of 4CP ranged between 0.1 × 10−7 M and 3.5 × 10−7 M. The fabricated electrode was also used to detect 4CP in soil and water samples. Good recoveries were obtained from the soil and water samples. The proposed electrode was used for analytical applications, including 4CP detection with high selectivity, low detection limit, sensitivity, and rapid response.