Withdrawal Capacity of Joints Constructed with 9.5-mm and 15.9-mm Through-Bolts and Diameter Nominal 15-mm and 25-mm Pipe-Nut Connectors

Abstract

Tests were conducted to determine the withdrawal capacities of 10-mm (nominal 3/8-in.) and 15.9-mm (nominal 5/8-in.) through-bolts with Diameter Nominal (DN) 15-mm (nominal 1/2-in.) and DN 25-mm (nominal 1-in.) pipe-nut connectors intended for use in light-timber frame construction. The capacity of unreinforced 15.9-mm through-bolts with DN 25-mm pipe-nut connectors was approximately 31.1 kN; the capacity of comparable reinforced connectors was approximately 71.2 kN. Likewise, the withdrawal capacity of smaller unreinforced 10-mm through-bolts with DN 15-mm pipe-nut connectors was approximately 13.3 kN; comparable reinforced connectors had a capacity of 17.8 kN. Similar 10-mm through-bolts with DN 10-mm pipe couplings had a capacity of 26.7 kN. Overall, results indicate that high-capacity joints can be constructed with through-bolt and pipe-nut connectors.