Abstract
As one of the most abundant energy, solar energy has already drawn great attention both from academia and industry, but how to use it to the utmost extent is still a formidable challenge for the development of human. Phase change material (PCM) is proved to be one of the most promising technique for storing thermal energy. Herein, we designed and fabricated a three-dimensional (3D) phase change composite (PCC) with excellent light-to-thermal conversion by constructing one-dimensional (1D) linear single-walled carbon nanotubes (SWNTs), two-dimensional (2D) boron nitride nanosheets (BNNSs) and polyethylene glycol (PEG) into a 3D bulk structure. This structure supplies the prepared PCMs with high thermal conductivity, excellent solar-thermal conversion efficiency, and high energy storage density. Results showed that the PCCs displayed a well-defined 3D interconnected structure, and their melting and crystallization enthalpies were 156.36 J/g and 153.33 J/g, respectively, which changed only slightly after 110 thermal cycles. The thermal conductivity of the composites could reach 0.92 W∙m−1∙K−1, which effectively enhanced the thermal response rate. Beyond that, the PCCs exhibited good leakage-proof performance and excellent thermal regulation performance. And the light-to-thermal conversion efficiency of PCCs reached 97.15%. These results indicate that this strategy can be efficiently used to develop novel PCCs with improved comprehensive thermal performances and high light-to-thermal conversion.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.